HT6147 iOS 7.0.6 SSL fix for iPad 2 will not install

I'm unable to install this update on my iPad 2. I go throught the whole process, Agree to T&Cs, download, prepare for Install, device reboots then when I check in the Software Update section I find the Software Update is still available for Installation.

Hello - in the end I think the bestsolution is patience.
I methodiaclly tried each day "Software Update" and proceeded to install and finally suceeded. No clear explanation, it just happened.

Similar Messages

Driver for Mobile device will not install with installer

Uninstalled EVERYTHING to do with iTunes/Apple/updater. Reinstalled several times and the mobile device will not install.
I WANT MY MONEY BACK. I HAVE NO PHONE SERVICE.

Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!

TS1702 All my documents in Pages for iPad 2 will not open.

All my documents show the first page of the User Guide. If I clicked on any of them, they would not open, except for the User Guide itself.
I have deleted the App and reinstalled it. All documents have gone, but i still have them on iTunes and iPhone.
In the new app which only shows the User Guide, it will not create a new document. Also the documents have not been reinstated from iCloud.
Help please. Would dearly like to get this sorted.

Sounds to me like you may have an issue with the firmware, i.e. the iOS version that you are runing. I also have an iPad 2 and sometimes have to restart it to get it to recognize and run a newly downloaded app. And only once or twice have I had to uninstall and redownload an app that this didn't fix. I think this has more to do with the way an app has been coded more than anything else.
You might try doing a "Reset All Settings" reset and set it up as a new iPad. You should not lose any data, apps, music, videos, etc. that you have stored on your device. I have done this a few times when tweaking the iOS 5.0.1 firmware and never lost anything. You do have to re-enter your ID's and Passwords for wifi. And of course you will need to go back into settings and reset any changes you may have made to things like location and notifications.
I don't know if this will work, but if I was in your place this is the next step that I would take.

TDM Excel Add-In for Microsoft Excel will not install: Installation Summary No software will be installed or removed.

Hello,
My7 computer is running Windows 7, I have the Base installation of LabVIEW, and have Microsoft Office 2007 installed.
I have downloaded the Add-In for Microsoft Excel from:
http://zone.ni.com/devzone/cda/epd/p/id/2944
unzipped it successfully (66 files created)
searched for messages and updates (No notifications.)
and I get a screen reading:
Start Installation
Review the following summary before continuing.
Installation Summary
No software will be installed or removed.
The "Next" button is grayed out, leaving "Save File" "<<Back" and "Cancel"
Does anyone have a suggestion why I am unable to go any further?
Thank you,
Solved!
Go to Solution.

Are you sure it hasn't been installed before? Under Control Panel...Programs and Features...National Instruments Software...do a "Change/Remove" and look down the list for "NI TDM Excel Add-In verX.XX". If found, uninstall and re-run the installer for the newest version.
This might help as well.
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

Latest update for creative cloud will not install error code 1 HOW TO FIX THIS????

I CAN NOT GET cc UPDATE STALLS AT 43% AND GIVES ((ERROR CODE 1 )) AS THE REASON??????

1) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate the option : Adobe Creative Cloud and uninstall the same.
2) Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3) Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5) Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://creative.adobe.com/products/creative-cloud

VSTO Tools for Office 2012 will not install

I am trying to install VSTO 2012 on a Windows 7 machine and get the following errors. When I got the access denied error for the file 1343597488.xml.temp I attempted a couple of things. One was to create a file with these extensions in the folder
to see if it then could be accessed and modified by the installer. No Go.
Noting that Read Only permissions were set, tried removing them but they reset themselves somehow.
Since this is an "Access to the path ..." type of error, I believe it should be taken literally and that this is a permissions issue. We're administrators on our machines at work. The permissions for the folders have been checked and
Full Control with Write Permissions are set both for my account and administrators.
So I tried moving the Web Installer MSI file and the VSTO 2012 executable out of the .../web platform installer folder to my desktop. This also didn't work. (Naturally, now that I think back on it. :) )
I can find no installer issues on Google for the Exe or for the MSI and I can't find otherwise what is wrong.
It's obvious it's a permissions thing and one of our help desk crew will help me dig into this here but I know enough of Windows administration myself, I think there's some sort of issue with the installer. And it isn't configurable so different options
that probably should be there to troubleshoot issues aren't exposed.
Thanks for any help.
Michael Durthaler

Problem solved.
The issue is the Downloads folder has been locked down by group policy. This explains why the read only permissions were being reset.
Simply moving the .exe file to another folder solved the problem but this does not explain why administrator privileged accounts are being overridden. Clearly with permissions set for full control this should override the read-only checkbox but maybe
I recall that wrong. (Admin permissions ought to have precedence that is but maybe group policy can be configured to where even these are preempted)
To clarify, when the move above was done, it was to the desktop
which is still in the .../users/mdurthal/... path. So it appeared moving the files to another location didn't work but the case here is
this path was still affected by the group policy :). Thought I should mention that.
Should this one bite anyone else just create a new folder off the C:\ drive that isn't affected by such settings.
Michael Durthaler

SmartPrint standalone for IE 9 will not install. Yes, I downloaded the new version.

First, the gorey details:
Windows 7 Professional 64 bit
IE9
HP Officejet 8600 e Pro
Installed the printer and it's working fine. During installation, web print was automatically installed and the icon appeared on the toolbar. When I clicked it, it said to install the latest version, which is Smart Print, click HERE to get the latest version, which I did.
Attempted installation - it gets to the end and proclaims: You do not have sufficient rights. Please do this again with ADMIN rights.
Checked users, and yes, there is only ONE user on this box and it's ME - and I have ADMIN rights.
Searched support and found this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02994297&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
Followed instructions to uninstall old version and reinstall new version.
Same problem.
I cannot install the new version due to it complaining I don't have ADMIN rights. And, yes there is only one user and that user is an admin.
So now what?
IT Professional with 30+ years experience
Windows 7 Professional 64 bit
IE 9
This question was solved.
View Solution.

What I would recommend is that you "uninstall" IE9 so that it rolls back to IE8 which should open up the compatibility for SmartPrint.
I have seen this before, and the newer browser does not collate the information in the same way that IE8 did.
EDIT : You may also need to download and install the Bing Bar to use this application (link below)
http://www.bingtoolbar.com/toolbar/en-us.html?FORM=MFEHPG&PUBL=Google&CREA=userid1743go4258614k3c2e6...
I hope this information is useful!

Software and drivers for photosmart c309g will not install under windows 7

hi
im trying to reinstall the photosmart c309g all in one printer, after i fitted a new HD im now running windows 7 32 bit, i downloaded both the basic and advanced instillation files, they both extract then disappear.
i have tried to do a level3 uninstall, but that does not seen to work properly with the printer model or os.
i have also cleaned out the system 32 /local/spool files (but it would not let me do all of them)
ive also searched this forum for solutions.......what is going on
thanks
leslie

Hi @leslie60 ,
I see that you are having issues installing the printer. After extracting the downloaded drivers, they disappear. I will certainly do my best to help you.
Something is preventing the setup program from recognizing files from this download.
I will provide you with some steps for editing the registry to resolve this issue in a Private Message.
In the forum beside your handle name just click on the envelope to view it.
Before doing any of the steps, back up the registry first. Back up the registry.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have downloaded the driver for HPc410 but will not install on my laptop

I have downloaded and installed the software driver for my HPC410 but it does not load on my laptop.

Any error messages? The diagnostics an driver wizard at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

TS1541 microsoft office for mac 2011 will not install.

Purchased office for Mac 2011 from store. Each time I put install CD in my Mac, it just ejects it. What am I doing wrong? This is my first Mac.

Check the dvd for scratches.
See if any other dvds work. Perhaps the drive is defective.
Try smc and pram reset.

Adobe Reader 9.4 for Mac OS will not install

I am running a Power Mac G5. Each time I try to install Acrobat Reader 9.4, I get an error message, #17535. It states that an error occured in the Stuff Operation. Could it be possible that the Stuffit program I am using is too old a version? I have Stuffit Expander ver. 10.0

In commandline, the command "installer -pkg install.pkg -target /" does work in installing pkg released by Apple. But it does not work in installing pkg released by adobe, such as "Adobe Reader XXX.pkg".

Latest patch for Fireworks CS6 will not install

Tries to install latest patch but it will not install, the application manager just hangs and crashes, on OSX 10.6.8

1) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate the option : Adobe Creative Cloud and uninstall the same.
2) Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3) Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5) Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://creative.adobe.com/products/creative-cloud

HP pavilion dv6-6c53cl - NO SOUND, DOWNLOADED DRIVERS FOR BEATS BUT WILL NOT INSTALL

I lost my hard drive, had no back up so did a fresh install to windows 8 (64bit). lost all of my sound. i tried to re download drivers , they download but fail to install, get a window that says ; "the hardware detected is not surpported by this IDT software package, the install will abort". I have tried different IDT packages with no success.. please help.

Are you using drivers on your model's support page here?
http://support.hp.com/us-en/product/HP-Pavilion-dv6-6c00-Entertainment-Notebook-PC-series/5191856/mo...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Update for keynote will not install...how to remove update or ignore?

How can I ignore an update for Keynote that will not install? I also have an update for my printer that I have installed 4 times but it still shows as needing to be installed?

Try hiding the Keynote app in the Trash where the Mac App Store can't see it. Then try to redownload it from your Purchases list. You should get the most recent version available.

HT4623 I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....

I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....Any advice appreciated.

give us more to work with in terms of info then "basically does not work any more"
it can be from it's on fire to the a key on the onscreen keyboard don't respond

HT6147 iOS 7.0.6 SSL fix for iPad 2 will not install

Similar Messages

Maybe you are looking for