HT6147 Trying to update my iPhone 4 to Iso 6.0 but can't get through please advice.
How do I get to have latest update on my iPhone 4s?
Connect to your computer and upgrade with iTunes
Similar Messages
-
I am trying to update my Iphone 4 to iSO 4.3 but when I following the instruction under Setting - General there is no option for Software udpate. Do I need to do this another way?
"Do I need to do this another way?"
Yes.
Updating from the iphone itself is ONLY available with ios 5 and above..
You update as always by opening itunes and connect the iphone. If there is an update available it will prompt you to update.
Your can ONLY updtae to the latest available software which is ios 6 -
i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes
The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
Clearly state the Troubleshooting Steps you have tried to Resolve it -
I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?
Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W. -
I'm trying to update my iphone 3gs from version 4.2 but under settings-general there is no update link. This is probably a frequently asked question, so I'm sorry but I'm new to this.
That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
I was trying to update my ipad and it froze up and I can't get into the home page to delete or uninstall the update, I have and itune logo and a plug on the screen
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I am trying to update an ipod version 2.2 with itunes but I keep getting an error (-1). Is this an hardware issue according to Apple and if so is there any way to fix this.?
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
If you disabled yuor computer's security software then that indicates a hardware problem,
I would say it is not workth fixint your old. likely a 1G. iPOd. -
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay. -
I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.
Is the app downloaded on her phone also?
-
I am trying to update my iphone 4, it has 4.1, when it goes into sync, it cancels out.
I have a slightly different version of the same question
Have been trying to upgrade IOS4 to current version for the first time, on my Iphone 4 and Ipad1
Backed up all data to I tunes as advized before downloading the upgrade
Now the sync starts and then stops
I Tunes keeps giving the following error message--
I tunes could not connect to this I phone/I pad . An unknown error occurred (0xE800000A) -
I have been trying to update my iphone 3gs to iso 5 but itunes freezes on backing up my phone
I have tried on a few occasions to update my iphone 3GS to iso 5. Once connected it i click to back it up, a box comes up with a bar in it. It can stay like that for hours, i left it 4 hours & it hadn't moved. I deleted itunes all of it. Then reinstalled it & its still the same. Can anybody help solve this problem?
thanks JayneYou have an iPhone 3G.
Apple stopped support for iPhone 3G after 4.2.1. Therefore the highest software version for the iPhone 3G and iPod touch 2nd generation is 4.2.1
Only iPhone 3GS, iPhone 4, iPod touch 3 and iPod touch 4 can go beyond 4.2.1.
Also, there's nothing wrong with iTunes. -
I am trying to update my iPhone 4s to IOS 1.6.3 but everyone I update it it says error but I don't know how to fix this error!! HELP!!!
That sounds like a possible security software issue on the computer you are using, or are you trying to do the update via the phone OTA?
If you are trying to do it OTA, you might want to connect the phone to the computer and iTunes and attempt the update from there.
BTW, the update is iOS 6.1.3. -
I am trying to update my RSS via sound cloud to iTunes but having issues.
I currently have my podcast working on iTunes but I have decided to change where I have them hosted. I moved my podcasts over to Soundcloud and currently have the rss feed but I would like to update my iTunes podcast with this so that all my podcasts showing up on sound cloud will sync up and automatically update.
here is my rss feed:
feed://feeds.soundcloud.com/users/48458062-the-collective-podcast/tracks
Podcast via Soundcloud:
http://soundcloud.com/the-collective-podcast
my podcast on iTunes:
https://itunes.apple.com/us/podcast/the-collective-podcast/id662393388
Any help would be greatly appreciated!
Thanks!The feed in use by iTunes is http://thecollectivepodcast.podomatic.com/rss2.xml , not the one you list. It has one episode, whose media file URL is
http://thecollectivepodcast.podomatic.com/enclosure/2013-06-14T16_06_53-07_00.mp 3
Your feed at http://feeds.soundcloud.com/users/48458062-the-collective-podcast/tracks has no episodes.
You will obviously need to get this sorted out before you can proceed. Once you have the soundcloud feed working properly you will need to add a special tag to the original feed in order to transfer the Store to using the new feed. The method is decribed here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Please make sure you are completely clear about it before proceeding, and check that the new feed works by subscribing manually in iTunes before you try moving the Store to it. -
Apple help service is crap. I've been trying to contact someone for 2 days now and can't get through to anyone. My audiobooks have disappeared from my Library - I paid a lot of money for these! None of the 'contact us' buttons get me through to anyone, you get sent electronically from pillar to post and end up hitting a brick wall.What a disgusting service - they can't even design a simple way of contacting them. I thought microsoft were bad but Apple are even worse!
the thing is i never threw away the project plus i have a copy of it lol... it has something to do with me moving the folder im just sure of it. because when i checked the trash when i tried to delete that new folder, its there.... thats the only thing i deleted from the event library window. then the other projects that were useless that i threw away. should i restore those? i havent emptied my trash.
also i could never find where it saves everything... so i just did a search... (im not a very techy guy) plus im unsure how to back it up... if its a feature in the program then i havent figured it out yet...
but i think if i put the "final cut projects" folder back where i took it from it should be fine. im THINKING thats the case. the only problem is i dont know where i got it from. sounds silly i know but i found the folder from doing a search in finder.
Maybe you are looking for
-
So my iphone 4 lock button broke i havent had it for a year yet what can i do???
so my iphone 4 lock button broke i havent had it for a year yet what can i do???
-
Post Author: JULIO.FAZENDEIRO CA Forum: Crystal Reports Hi, I'm designing a report in CR 8,5 to work in a Epson TM-U210 In CR i've got to define paper height size, but i don't know the final height. If I put the size height like an A4 the sales recei
-
Is it possible to set a laf to only one component in the application?
I'm developing a GUI and wanted to know if it is possible to set a particular laf to one of the guis components, thanks a lot.
-
Chromium keeps asking to be set as default (default option wont stick)
Chromium keeps showing that little orange bar every time I start it up and it asks to be set as the default browser, which I keep clicking on. It doesnt remember that Ive told it to be the default browser. I have tried removing .config/chromium and .
-
What I want to do is plot time vs temperature with two y-axis. The first axis (on the left) is deg-C and the second axis (on the right) is deg-F. If I rescale one axis, I want the other to rescale accordingly. I tried plotting time vs deg-C, then com