HT6154 I changed my id online and iPhone does not recognize
I changed my id online and iPhone does not recognize
<Re-Titled By Host>
What do you mean by it doesn't "recognize" it.
Help us help you by providing some details. We're not mind readers here.
Similar Messages
-
HT204053 I just changed my Apple Password and icloud does not recognize the password.
I just changed my Apple Password and icloud does not recognize the password.
To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials. When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud. Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.
-
i have a new iPhone 5s, it does not recognize my password, when I try to restore it my birthday and email does not recognize, it only happen when I change my old iPhone 4 and change the Apple ID of it. please help me, all my phone now does not recognize my password.
To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I do not understand why my computer is telling me that my new iphone 5 has malfunctioned and Windows does not recognize it when I plug it in the computer.
I have tried several times and gotten the same message. Any suggestions?
thanksMake sure you can see your device in the sidebar>>
Open Itunes on your computer
Click View
_Click View Sidebar
Then Try EXPANDING all sections in the following article, pressing CTRL>p, printing it all out and following the instructions step by step. Use the instructions that apply to your computer's Operating System, but don't skip any steps.
http://support.apple.com/kb/TS1538
You are installing the Apple Mobile Device USB driver, which I did not have to do previously, so something in the updates has been left out / or changed. -
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks
As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock -
when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me
I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps -
. I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions?
Hello Alexdad,
We've an article that can help get your iPod Nano working with your computer.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen -
My iphone is stuck in emergency call mode and itunes does not recognize my phone
my iphone is stuck in emergency call mode and itunes does not recognize my phone
NVM... broke down and called Apple Care. Pressed on/off button and held it for a few minutes before pressing home button. In recovery mode, but at least it is doing something now!
-
"Find my iPhone does not recognize New iPhone 5
I use my AppleID to "Find my iPhone" successfully on iPhone 4, iPhone4S, iPad, iMac. All show up. New iPhone5 iOS 6.0.2 uses same AppleID in the General iCloud settings, Contacts,email,photostream,safari bookmarks,reminders,notes, are all synced fine. I can even see how much storage is available in my iCloud account on the new iPhone5. The Problem is that "Find my iPhone" does not recognize the new iPhone 5. Yes location services is turned on. The iPhone5 can find its location in the map app, can find all other devices in "Find my iPhone" just not itself in "Find my iPhone" I tried a hard reset.
ANY IDEAS?How about when the passcode is correct but not recognized?
I was prompted to enter a password to unlock the device when I downloaded IOS 7 several months ago.
Entered the password every single day for months, never a problem.
Yesterday I attempted to download the most recent IOS version and I was asked for a passcode before I could do that (my phone was unlocked). Online I found out the passcode is the unlocking password. It did not work and I was unable to use the phone for several minutes after 5 attempts. I just stored the phone and when home I charged it overnight.
This morning I unlocked the phone as usual and used it without a problem for emails, phone calls. etc.. Now, after not having used it for a while, I am asked for the passcode to unlock it as usual, and although I am sure I entered the right code, it is not recognized. I am unable to unlock my phone, although I have done it for months.
This is not a case of forgotten passcode! And I see it has happened to many others that use 4s and 5s iphones.
i could attempt the iTune connection fix, but it troubles me that all solutions are presented for forgotten pascodes, and in many cases actually the passcodes are not recognized. Which means, it will keep happening unless Apple offers a solution. -
I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
IMovie (and iMac) does not recognize device(s)
Hello and thanks for reading. I know this topic is like beating a dead horse but this one is unique. I'm a professional editor and I couldn't figure this out so any help would be appreciated. Here's the play by play:
I edit using FCP 5.1.4 and have for years. I've had the same set up running for years and do high volume editing.
I have a chain of 4 Lacie drives, all connected by firewire.
At the end of that string, I have my tape player for capturing footage, a Sony GV-HD700, which then goes on to the TVs, DVD players, etc.
Also the end of that string, I also have a disc burner for making DVDs.
So it goes: iMac > Lacie #1 > Lacie #2 > Lacie #3 > Lacie #4 > Sony tape player & DVD burner > TVs, VCRs, etc.
Yesterday, I was in a rush and the DVD burner was going slow so I unplugged it from the end of the string of Lacie drives and plugged it directly into the back of the computer to see if it would burn faster.
It didn't, so I plugged it back into the end of the Lacie string.
At that point, Lacie #4 became unrecognizable to the computer and therefore so was the tape player, which is further down the chain.
When I plugged the tape player high up the chain, into Lacie #3, it still was not recognized.
I plugged the tape player (Sony GV-HD700) directly into the back of the computer...still not recognized.
I took the Sony GV-HD700 into our other editing bay and it was still not recognized.
I pulled out my camera (Sony HDR-FX1000) and plugged it directly into the back of the original computer...recognized just fine.
I plugged Sony HDR-FX1000 camera into the back of Lacie #2...recognized just fine.
I took the Sony HDR-FX1000 camera into our other editing bay...recognized just fine.
I have a big deadline so I said "Screw it." and was just going to capture from the camera for the time being.
I reset the Lacie drive chain, plugged the Camera into the back of Lacie #4 (just like the original setup) and BANG: Lacie #4 and the Sony HDR-FX1000 camera was not recognized.
I plugged the Sony HDR-FX1000 camera directly into the back of the computer...still not recognized.
I took the Sony HDR-FX1000 camera into our other editing bay...still not recognized.
I thought it might be a Final Cut Pro issue so I pulled up iMovie and it does not recognize any device connected to the computer even though I'm looking directly at it plugged in.
The entire iMac has lost the ability to recognize devices that I've used for years. I've now lost the ability to capture footage and I'm running out of time. It's almost as if the devices were getting infected by one of the Lacie drives (I think Lacie #4). Is that even possible? Has anyone ever heard of something like this? I don't know if it's something I need to change on the iMac to recognize them again, or if it's a setting on the device to reset the connection, or if somehow the Lacie drive corrupted the devices and made them unrecognizable to iMacs.
It's very, very weird.
Thanks for your help.
27" iMac (2009)
OS X 10.8.5
Final Cut Pro 5.1.4
Tape player: Sony GV-HD700
Camera: Sony HDR-FX1000
I've had this setup for years so I don't know what type firewire it is.See:
iOS: Device not recognized in iTunes for Windows -
I have a itouch and it ended up getting locked. I ave tried to connect to iTunes and it does not recognize it. Tried the 2 help options and they did not work either (turn off and hold power button, connect to itunes).
No sure if it makes a difference but i have a iphone 4s, iphone 3 and a itouch. I do not use itunes much so I am out in the dark. Also Apple says to bring it in for service.
ThxDo as the manual says to do and restore the ipod. If you are unable, then type "unable to restore" into the search bar at the top of this page by Support and read the resulting help articles.
-
How do you restart yrdi you just downloaded itunes and it does not recognize your ipod because it is diabled?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
Open the form layout in input mode if no record exists in the VO?
Hi, I am using JDeveloper version: Studio Edition Version 10.1.3.1.0.3984 JHeadstart version: 10.1.3.1 Release 10.1.3.1.26 I have a group with Form Layout where Single-Row Insert allowed is true. What I want to do is: When I open this form in the bro
-
dear team, Hi I am working on SOA 10.1.3 I have a human task in bpel process. I want to create a subtask for that programtically. Can I create a sub task programatically? Regards, Radha
-
IPhone 4 dropping streaming music using Airport Express
We've got Airport Express to stream music to the stereo. Using it from iTunes and Spotify on both iPhone and computer. iPhone regularly stops working. What's weird is that it isn't dropping the connection and continuing to play on the phone, but the
-
I have entered the product #, signed in, then checked my address info, after that, clicked continue. it said, we're sorry, the transaction cannot be completed at this time. Please try again later or contact us. contacting them seems to be even more d
-
Can I disable my vacation message facility in emai...
My vacation message option was taken over by a spammer. I deleted their message and unticked the option to leave a message. As the spammer was able to turn this on in the first place, I would like to disable the vacation message option altogether. My