HT6240 Where does the DEP Supervision Profile come from?
I've configured a server instance in DEP and successfully enrolled an iPad with OTA Supervision using Casper 9.4. I cannot figure out where it got the Supervision Profile from, and why it correctly states the name of my school district. I did not upload it anywhere that I remember..
thank you,
chris
Thank you. I now see that is coming from the DEP account information.
I was looking at an iPad that enrolled using the prestage settings but must have been supervised still from Configurator.. And the district name was slightly different than the DEP info! Confusion reigned at the end of my day..
chris
Similar Messages
-
Where does the smiley Mac face come from?
Hi folks,
Forgive me if I have the wrong forum but I couldn't find a more appropriate one. A few times recently I have come back to my machine when I've left it with aMule running (an eMule file sharing app) and I've found a smiley Mac face on the bottom of my desktop, just under where the Widget icon appears in my dock.
This face then remains on top of any other window I open. If I reboot the machine it disappears but I am just very curious to hear if anyone can explain how or why it gets there?
With my utmost thanks as always to anyone who takes the trouble to respond to my pesky query (thank heavens it's all I have to worry about for once
Kind Regards
Bernard
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)Thanks Jrsy
I guess that's the best place to ask. I am assuming it must have something to do with aMule but I just wanted to check in case anyone else is familiar with this scenario and can explain it. It seems to be malign enough, but I am a little concerned as it would suggest that the fact that I've only granted access to my shared folder for public use, this does not prevent me from the possibility of receving some unwanted stuff elsewhere and I am therefore a little concerned I might be leaving myself open to more malicious actions?
Much appreciate you bothering to get back to me
Kind Regards
Bernard -
Billprint program where does the prior reading value come from? which table
hi all,
In billprint pgms the value is stored in structure ERDZ but i'm not able to find how these values are populated and where?
i need to know from which table prior reading and current readings are populated..
is there any program that triggers the billprint forms, if so how to find it?
pls suggest those pgm names.
thanksHello,
If you have already attached the form in your contract account and you have done your meter read and Billing, you get these values during running of Invoice program.
Pls look into EABL
also
EABLG MR Reasons in MR Document
EABLARC Internal index f. analyzing archivable meter reading results
Hope this helps
Rgds
Rajendra -
Where does the name space prefix come from
When I test my mapping in the Integration Builder both my mapping type and my name space get prefixed with nsX (ie ns1, ns2, etc). How can I tell in advance was the X value will be?
Thanks
PatrickHi Patrick,
there is no possibility.
According to the XML namespace declaration the prefixes are just internal aliases with no external meaning.
E.g. <ns1:abc xmlns:ns1="http://www.sap.com" /> and
<iLikeLongPrefixes xmlns:iLikeLongPrefixes ="http://www.sap.com" /> are totally equivalent according to the XML namespace specification.
Therefore, everyone (human or machine) who produces a program can choose the prefixes as he wants. Moreover, he may change the rules for creating these prefixes without being incompatible.
Consequently, the namespace prefixes should not be important for you. -
Where does the extra outside route come from?
VPN-ASA5505# sh route inside
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is <IP address> to network 0.0.0.0
S 172.16.55.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 192.168.174.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.1.43.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.1.32.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.225.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.35.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.8.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.9.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.10.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.12.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.2.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.160.0.0 255.255.0.0 [1/0] via 10.161.0.1, inside
C 10.161.0.0 255.255.0.0 is directly connected, inside
S 10.162.7.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.30.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.19.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.20.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.21.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.110.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.99.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S 10.162.95.0 255.255.255.0 [1/0] via 10.161.0.1, inside
VPN-ASA5505#
VPN-ASA5505#
VPN-ASA5505# sh route outside
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is <IP address> to network 0.0.0.0
S 10.92.1.1 255.255.255.255 [1/0] via <IP address>, outside
C <IP address> 255.255.255.224 is directly connected, outside
S* 0.0.0.0 0.0.0.0 [1/0] via <IP address>, outside
VPN-ASA5505#
VPN-ASA5505#
VPN-ASA5505# sh run | incl route
route outside 0.0.0.0 0.0.0.0 <IP address> 1
route inside 10.1.32.0 255.255.255.0 10.161.0.1 1
route inside 10.1.43.0 255.255.255.0 10.161.0.1 1
route inside 10.160.0.0 255.255.0.0 10.161.0.1 1
route inside 10.162.2.0 255.255.255.0 10.161.0.1 1
route inside 10.162.7.0 255.255.255.0 10.161.0.1 1
route inside 10.162.8.0 255.255.255.0 10.161.0.1 1
route inside 10.162.9.0 255.255.255.0 10.161.0.1 1
route inside 10.162.10.0 255.255.255.0 10.161.0.1 1
route inside 10.162.12.0 255.255.255.0 10.161.0.1 1
route inside 10.162.19.0 255.255.255.0 10.161.0.1 1
route inside 10.162.20.0 255.255.255.0 10.161.0.1 1
route inside 10.162.21.0 255.255.255.0 10.161.0.1 1
route inside 10.162.30.0 255.255.255.0 10.161.0.1 1
route inside 10.162.35.0 255.255.255.0 10.161.0.1 1
route inside 10.162.95.0 255.255.255.0 10.161.0.1 1
route inside 10.162.99.0 255.255.255.0 10.161.0.1 1
route inside 10.162.110.0 255.255.255.0 10.161.0.1 1
route inside 10.162.225.0 255.255.255.0 10.161.0.1 1
route inside 172.16.55.0 255.255.255.0 10.161.0.1 1
route inside 192.168.174.0 255.255.255.0 10.161.0.1 1
VPN-ASA5505#Hello,
Show run | include reverse-route
10.92.1.1 belongs to which IP address pool? REmote IPsec users or Anyconnect?
Anyconnect by default has RR with no configuration needed
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com -
Contacts - where does the TP pick them up from?
This may be a dumb question, but I cannot correlate the contacts between the TP and any of my email accounts. Lots of overlap, but also lots missing.
So, where does the Contacts app pick up the contacts list from? Anyone got a definitive answer?
regards
Alan
Post relates to: HP TouchPad (WiFi)OK - I think I've got it.
It's picked up my contacts from my Exchange account - and it's also picked up "suggested contacts" as well. Which is where I was getting confused.
Alan -
Where does the file path get reported from?
When looking at ZAM software information, it'll show the product name and then like:
c:\program files\something\
Where does that path information come from?
The windows registry?
Or does it actually come from the location of the .exe itself?kjhurni,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Where does Confirm Password Change Box come from?
I have just created a page that allows the user to change his password and it all works fine untill i made the textfields into password fields. Now A box pops up asking the user to select which user they are changing the password for. I don't want this. I can't see where the code is to genarate this or how to remove it.
Does anyone have any ideas how to stop this happening?
Thanks
LTGreat thanks. That makes a lot of sense But a bit anoying
Thanks
LT -
Where do the song title names come from?
i just bought a cd off ebay, one which i believe was manufactured by the person who sold it to me, because i don't think the album was ever released on cd, only in mp3 form.
anyway, i put the cd in, and instead of the correct track listing coming up on itunes, each track listing had been replaced by a title which insults the artist who made the album.
i'm trying to find out if these new, insulting track names were somehow encoded by the album seller who manufactured the cd, or whether the names were encoded into itunes library of track names which were then matched up with the code of the tracks on the cd when i put it into my computer.
anyone know whats up?For CDs, iTunes does a query to the Gracenote database to get the track info. Since Gracenote is user-updatable, somebody apparently put bogus data in for that particular CD.
To correct the info, right-click the track, Get Info, go to the Info tab and type in the correct info. -
[impt] Where does the "Withdrawal Quantity " figure came from?
Hello to all,
I just have an issue with withdrawal quantity. How is this "withdrawal quantity" field computed in MD63.
Here's my scenario:
I have a material ABC for plant 1234. I have checked the MRP settings of this material for planning strategy and consumption mode. The planning strategy used is <b>Z0</b> (which is make-to-stock production), with this, the requirements type for planned independent requirements is <b>LSF</b> and requirement type for the customer requirement is <b>Y41</b>.
Now, the comsumption mode is 1 which is backward. The Bwd. consumption per. is 99.
As defined in the documentation (provided by SAP) for Demand Management,
"The consumption period (either forward or backward) is specified in workdays and is valid from the current date. Sales orders,material reservations, dependent requirements then consume the planned independent requirement quantities that lie <b>within the consumption period</b> and after (for forward consumption) or before (for backward consumption) the requirements date."
Now, how do you determine the withdrawal quantity based on these information. Is the consumption period important? How do I determine the consumption period? Where do I start the backward consumption?
Thanks.
Regards,
PatvinPatvin,
In your case PGI to delivery will be done using movement type 601. You can check this in transaction OMJJ, there will be a small check box activiated for movement type "Reduction of Independent requirements".
Since you have 99 days set a backward consumption, system will first consume PIR which is available on todays date, if not found it will go back descending from today to consume.
Say for example:
PIR:
1000 - 01/08/2007
1500 - 15/08/2007
2000 - 01/09/2007
1000 - 10/09/2007
Now if i do PGI for a quanity of 3500, it will first consume, 1000 - 10/09/2007 then 2000 - 01/09/2007 and finally 500 from 15/08/2007.
Regards,
Prasobh -
Where does the 80 gig iPod ship from?
Ahh the waiting game: Placed my (black 80 gig) order 9am PDT on 9/14. Estimated shipping date is 9/18 (two business days). I optimistically hoped it would ship out on the first business day.. oh well.
Anyone receive yours yet? If so what is the origin? China? I called Apple and tried to change to expedited shipping but they said it was already in the system and would ship a day early. It didn't. Oh well, hard to be patient in the internet age.Weekends do not count as 'business days' or 'shipping days' with any carrier (FedEx, UPS, DHL) unless you are getting a Saturday Delivery.
If your iPod shipped on the 14th, the soonest you will get a two-day shipment is Monday the 18th.
In addition, my iPod shows as shipped on SATURDAY the 16th, with a 'Service Exception' from Shanghai. With customs and the like you are probably not going to get 2-day shipping anyway.
Basically, when my iPod shows up via FedEx I am calling to return it to Apple as my wife bought me one locally. -
Where do the graphics in templates come from?
I'm trying to use an existing template in Pages to create an invitation. It doesn't suit my needs but I'm trying to make it work. I don't want to purchase a template, though I've not even found anything affordable and appropriate in my searches.
Anyway, as a former PC user, I'm accustomed to being able to change a graphic in a pre-designed template. But I can't find a source for the graphics used in Pages anywhere on my iMac! I used to have thousands of 'clip art' images at my disposal. Is there nothing comparable on a Mac?I guess I should have tried your suggestion before responding. I cannot locating anything remotely similar to an image in the path you described. First of all, when I go to my 'applications' folder I hit a dead end at 'Pages08'. There is no pages 'folder' that contains these shared resources. I've searched 10 different ways, including a spotlight search on the file name in the original response. Can anyone give me another path or a suggestion for a spotlight search that would turn up this 'content' folder of shared resources?
Again, many thanks.
Message was edited by: nicolef207 -
Where does the built-in dictionary download from for iPad?
My school has just upgraded their internet connection because we have gone to a computing school, using iPads. Some of the students can't access the dictionary, simply because it is not downloaded, but the dictionary won't download. We think it is our firewall, because it won't download/install via our internet, but it will download/install when I use the internet sharing on my phone (using my 4G network).
Our tech guy says he will need the URL for the dictionary download in order to clear any issues with the firewall.
Apps and other things download/upload and install fine, it's just the dictionary that won't do it.Some of the iPads do not have a dictionary despite having 6.1.3. When we hit define define, it says that there is no dictionary present, we hit the download button, but it never downloads.
I'm not sure if anyone is currently having the problem right now, so I can't get you an error screenshot, but there was 2 or 3 people that had this problem that I had to download the dictionary using the 4G network sharing on my phone, because it wouldn't download using the school's network. -
Where does this /etc/init.d come from?
Hi,
I just noticed that I have a /etc/init.d, which I am pretty sure doesn't belong there (at least it wasn't there before).
drwxr-xr-x 2 root root 4096 2008-01-16 16:31 init.d
I checked my pacman.log for packages I've installed the day this directory was created:
glib2 2.14.5-1
kernel 2.6.23.14.1
less 418-1
thunar 0.9.0-2
xorg-init 1.0.7-3
python-pysqlite 2.3.5-1
namcap 2.0-1
devtools 0.4-1
The only package from that list from which I, as the luser that I am, think could potentially cause this is xorg-xinit. I had a look a the PKGBUILD but couldn't find anything to back up this assumption.
Thanks in advance for any ideas.
PS.: I swear, by the flying Spaghetti Monster, that I didn't create it myself .Nothing to contribute, but I just appreciate how phrakture, and other devs/admins, are involved in the forum, it helps create an amazing community.
Last edited by Sjoden (2008-01-28 21:56:53) -
Where does the JeelyBeans look and feel come from?
Where does the JellyBeans Swing look & feel come from that is used in
Workshop UI?
-NickNick -- Thanks for the kind words.
While we don't have plans to make the look and feel available outside of the IDE,
you may want to check out some of the other look and feel resources within the
Java community such as
www.javootoo.com
or
http://directory.google.com/Top/Computers/Programming/Languages/Java/Class_Libraries/Graphics/User_Interface_Classes/Look_and_Feels/?tc=1
We did use JDK 1.4 for Workshop and were very pleased with its performance and
other aspects.
- Pete Horadan
Workshop Dev Mgr.
"Nick Minutello" <[email protected]> wrote:
I think it would be excellent if BEA made the JellyBeans look and feel
freely available - even getting it added to the Sun JDK.
There is a distinct interest in developing C# clients purely due to the
fact
that Swing doesnt perform and doesnt look good. JDK1.4 reportedly has
numerous performance improvents. What is missing is a good look and feel.
The Jelly Beans look and feel is quite good (I suspect that it is no
accident that its flat look is similar to Visual Studion .NET.).
I think that encouraging developers to remain with Java for GUI clients
can
only be good for Java and in turn J2EE as a whole. A pure java environment
would be much better than a deliberatly mixed environment. Java RMI is
much
simpler than SOAP, etc.
Aside from the ultruistic viewpoint, we would dearly like to use it in
our
Swing applications - perhaps we can stave off a turn to C# / .net clients.
Regards,
Nick
"Carl Sjogreen" <[email protected]> wrote in message
news:[email protected]...
At this point we don't have plans to license the look and feel of the
application (the swing components) separately, but I'd love to hearmore
about what you had in mind.
-Carl
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
I am really interested in the answer to this question... please
=+=+=+=
Does BEA have any intentions of making the look & feel commercially
or
freely
available? (esp for existing, but potentially growing customers ;-)
-Nick
=+=+=+=
-Nick
"Ian M. Goldstein" <[email protected]> wrote in message
news:[email protected]...
It's homegrown. (There is no pluggable look-and-feel at this time.)
Ian M. Goldstein
Developer Relations Engineer
BEA Systems, Inc.
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
Where does the JellyBeans Swing look & feel come from that is
used
in
Workshop UI?
-Nick
Maybe you are looking for
-
Event Structure's value change, not detecting changes when tabbing thru array of clusters
Hi! I have an array of clusters (int, int, string, int) control, and want to detecting changes made to the it. I used the Event Structure's value change case on the array, it works excellent except that it'll only detect the changes when you click
-
Hello, Need some guidelines regarding SAP Interface. Iu2019m an Oracle Developer u2013 all the applications are developed using Oracle Form Designer and Reporter thru PL/SQL language. Most of the applications we develop are for the Banking Industry.
-
hai i want to use the wait concept i mean i dont want to go to next peice of code after calling bapi until it updates and save the records for this which statment i should use regards afzal
-
Oracle 10g Release 2 Enterprise Edition Oracle Enterprise Linux I am creating a dataguard configuration on my laptop. Both Primary and Standby are on the same Oracle Home. I actually managed to create a standby database using RMAN Duplicate Target Da
-
How to capture image from USB camera in Labview 2010
Hey all, I am very new to Labview but am working on a project that requires me to use a sensor to send a signal to Labview to capture an image from a USB camera and save. Then apply some image processing to do some geometric calculations. The calcu