HT6312 I don't understand why you are holding our documents captive!
How can you NOT make it backwards compatible! I prefer not to install the latest IOS (as we've seen what happens, with the last IOS update) before I am comfortable with the update. This is irresponsible and not customer friendly. Basically I am S.O.L. if I have an older iPhone or iPad. Thanks for being so customer friendly.
James,
Sorry I did not realize it was User to User. Very funny, really. Who would you like the check made out to? LOL
So I went to login to iCloud (on my PC) and I was forced to update to a different version of iCloud that would no longer allow any devices below IOS 8 access to the Pages area. I just don't understand why thy (Apple developers) cannot make it backwards compatible.
Similar Messages
-
Why do I need this update?? I don't understand what you are offering
I'm afraid that this system will be too complex for my limited ability on computers. All I want is to be able to get my mail without too much difficulty and find my desk top unchanged.,
QuickTime Player 7 was released in April, 2005 and if you purchased a Pro upgrade it is still valid today.
Updating QuickTime Player will not remove your Pro upgrade. -
I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!
You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup. -
From what I understand RAW photos are supposed to open in raw in photoshop CC. I don't understand why my RAW photos don't open in RAW in photoshop CC or Lightroom 5
Has the behavior changed compared to how it used to open ? If so, do you refer to the Camera RAW window similar to this: http://screenshots.en.sftcdn.net/en/scrn/78000/78026/adobe-camera-raw-22.jpg
What is the file extension of your photos ?
In Lightroom, there is no special way of opening a RAW file vs. JPEG. They all open the same. What is the Lightroom behavior ? Can you post a screenshot ? -
When I try to share my iMovie video on to Youtube, an alert appears saying that my Youtube username and password are incorrect. I have shared successfully before so I don't understand why cannot do so now.
Hey.
Since you seem to have tried mostly everything, apart from exchanging the motherboard, I'd say you have at least one option left, and that's to reinstall Windows from the recovery partition / recovery discs. That might solve the problem, if this is due to a software-error. General updates etc. might not work to fix such problems, but a clean install should.
If that doesn't help, I'd say the problem is somewhere either with the CPU or the motherboard, maybe bad connections or some sort of malfunction that prevents the computer from coming out of the 100% CPU usage.
IT-technician, running my own company in Bergen, Norway
Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050 -
I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?
The apps are free with iOS 7 if you purchased a new device after September 2013. The apps do not come free just because you are running iOS 7 now. Did you purchase or receive a new iPad recently?
If you did, are you using the same Apple ID to get the apps that you used to activate the iPad? If you are, sign out of your ID, restart your iPad, sign in again and go back to the App Syore and see if the apps show up as free.
Settings>iTunes & App Store>tap your ID and sign out. Restart the iPad and go back to the settings and sign in again. -
I don't understand why me phone keep saying my phone is disable can I get help please
I need help I don't understand why my phone is telling me its disable and want let me in the App Store I Changed the pass word now what can I do
If you are having store account problems, contact the iTunes/app store staff at http://www.apple.com/emea/support/itunes/contact.html and they can straighten out your account.
-
I don't understand why appear new decimals.
Hi Jorge,
Instead of using
Data.SetValue(FormatDouble.DecodeDouble(self.PKg));
use
Data.SetValue(FormatDouble.DecodeDecimal(self.PKg,Data.Scale)); //
This will take the second parameter of scale
You will see the desired results.
Thks,
Sanjay
-----Original Message-----
From: Dave Ortman [SMTP:dortmanyahoo.com]
Sent: Monday, March 05, 2001 12:32
To: Jorge Bellido; forte-userslists.xpedior.com
Subject: Re: (forte-users) I don't understand why appear new
decimals.
Simply put, the problem stems from the fact that
floating-point arithmetic is inherently imprecise.
Rounding errors are common.
With doubles, you get 16 digits of accuracy. Beyond
that there is no guarantee.
If you want more information:
http://docs.sun.com/htmlcoll/coll.648.2/iso-8859-1/NUMCOMPGD/ncg_goldberg.ht
ml
-Dave Ortman
--- Jorge Bellido <jorge.bellidoeam.es> wrote:
> I have another problem with numbers. So,
>
> Data: DecimalNullable = new;
> Data.Scale = 20;
> FormatDouble.Template = TextData(value='#');
>
> Dato.SetValue(FormatDouble.DecodeDouble(self.PKg));
>
> PKg is a widget DataField, whose mapped type is
> TextData with input mask float. When I write 1.12
> into the widget the variable Data is
> 1.1200000000000001, and I can't understand it. I
> would like that variable Data was 1.12.
>
> Could anybody to explain it?
>
> Thank you very much.
>
For the archives, go to: http://lists.xpedior.com/forte-users and
use
the login: forte and the password: archive. To unsubscribe, send in
a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com -
my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense.
hmm, well I would say that raises the possibility of an issue with your ipad, and lessens one with your router.
What version iOS are you using? Update
Then Its time to try a restore.
How to update your iOS device
http://support.apple.com/kb/HT4623
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766 -
I don't understand why i can't play my games on club pogo
i don't understand why i can't play my games on club pogo, please help me figure this out
What is your operating system (Windows XP, Vista, 7, 8)?
What browser are you using (Internet Explorer, Firefox, Chrome, Opera, Safari)? -
I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?
Are you trying to get an upgrade before you're actually eligible? If that is the case, it doesn't matter if you've been a customer for 6 years or 6 days...if you're not eligible then you're not eligible. Some of your possible options are to pay full retail, do an early edge up (if you are eligible for that option), or buying a phone from some other source to use.
If your situation is something different then it might help to share that. The options may still be the same but it helps to know what exactly the issue is. -
I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
Why is this an error??? I don't understand why it is... Help Please
Hi,
Ok, I'll preface this by saying there's a lotta code pasted in here but it really quite an easy question, I just need to post all the code so you understand where what came from.
Now.............the question I'm trying to do is to create an applet that has 2 buttons -- each button when clicked opens an application (one is a simple calculator, the other a Mortgage calculation app). When you click one of the buttons (calc or mortgage), that app opens infront of the 2 button menu so its in "focus". The button on the 2 button menu then switches to a "hide app X" button (ie: "Mortgage", changes to "Hide Mortgage"). Thus if you click the hide button, the app that was opened is hidden, and then that "hide" button switches back to the original "app X" button. Pretty simple.
Now, I have from my text book an example that does exactly this, with the simple calculator already in it, and with another app (a traffic light thing) where the Mortgage should be in my final product. I also already have the Mortgage applet I need to insert from another book example in place of that Traffic Light portion.
Now, common sense would dictate that I should be able to just copy my code for the Mortgage applet into the example that has the 2 button menu structure, and overwrite the code I want to get rid of (the traffic light) with the mortgage code & rename the menu buttons. Right?? A simple switch of one thing for another... but therein lies my problem.
I copied all the Mortgage code in correctly over the traffic lights, switched the button names, tried to compile it but I get one error....
Exercise12_17.java:52: cannot resolve symbol
symbol : method pack ()
location: class MortgageApplet
mortgageAppletFrame.pack();I don't understand why..... mortgageAppletFrame.pack(); was a simple rewrite from lightsFrame.pack(); like every other line...... it should work. I've gone over it for 2 days......... Anyone know why it comes up as an error???
Below, in order going down is (1)my code with the 1 error I can't solve, (2)the original menu example I tried to edit, and (3)the Mortgage app code...........
Does anyone know what my error is?? Help or a hint would be greatly appreciated........ Thanks.
My erroring app.......
// Exercise12_17.java: Create multiple windows
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.TitledBorder;
public class Exercise12_17 extends JFrame implements ActionListener {
// Declare and create a frame: an instance of MenuDemo
MenuDemo calcFrame = new MenuDemo();
// Declare and create a frame: an instance of RadioButtonDemo
MortgageApplet mortgageAppletFrame = new MortgageApplet();
// Declare two buttons for displaying frames
private JButton jbtCalc;
private JButton jbtMortgage;
public static void main(String[] args) {
Exercise12_17 frame = new Exercise12_17();
frame.setSize( 400, 70 );
frame.setTitle("Exercise 11.8: Multiple Windows Demo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
public Exercise12_17() {
// Add buttons to the main frame
getContentPane().setLayout(new FlowLayout());
getContentPane().add(jbtCalc = new JButton("Simple Calculator"));
getContentPane().add(jbtMortgage = new JButton("Mortgage"));
// Register the main frame as listener for the buttons
jbtCalc.addActionListener(this);
jbtMortgage.addActionListener(this);
public void actionPerformed(ActionEvent e) {
String arg = e.getActionCommand();
if (e.getSource() instanceof JButton)
if ("Simple Calculator".equals(arg)) {
//show the MenuDemo frame
jbtCalc.setText("Hide Simple Calculator");
calcFrame.pack();
calcFrame.setVisible(true);
else if ("Hide Simple Calculator".equals(arg)) {
calcFrame.setVisible(false);
jbtCalc.setText("Simple Calculator");
else if ("Mortgage".equals(arg)) {
//show the CheckboxGroup frame
mortgageAppletFrame.pack();
jbtMortgage.setText("Hide Mortgage");
mortgageAppletFrame.setVisible(true);
else if ("Hide Mortgage".equals(arg)) {
mortgageAppletFrame.setVisible(false);
jbtMortgage.setText("Mortgage");
class MortgageApplet extends JApplet
implements ActionListener {
// Declare and create text fields for interest rate
// year, loan amount, monthly payment, and total payment
private JTextField jtfAnnualInterestRate = new JTextField();
private JTextField jtfNumOfYears = new JTextField();
private JTextField jtfLoanAmount = new JTextField();
private JTextField jtfMonthlyPayment = new JTextField();
private JTextField jtfTotalPayment = new JTextField();
// Declare and create a Compute Mortgage button
private JButton jbtComputeMortgage = new JButton("Compute Mortgage");
/** Initialize user interface */
public void init() {
// Set properties on the text fields
jtfMonthlyPayment.setEditable(false);
jtfTotalPayment.setEditable(false);
// Right align text fields
jtfAnnualInterestRate.setHorizontalAlignment(JTextField.RIGHT);
jtfNumOfYears.setHorizontalAlignment(JTextField.RIGHT);
jtfLoanAmount.setHorizontalAlignment(JTextField.RIGHT);
jtfMonthlyPayment.setHorizontalAlignment(JTextField.RIGHT);
jtfTotalPayment.setHorizontalAlignment(JTextField.RIGHT);
// Panel p1 to hold labels and text fields
JPanel p1 = new JPanel();
p1.setLayout(new GridLayout(5, 2));
p1.add(new Label("Annual Interest Rate"));
p1.add(jtfAnnualInterestRate);
p1.add(new Label("Number of Years"));
p1.add(jtfNumOfYears);
p1.add(new Label("Loan Amount"));
p1.add(jtfLoanAmount);
p1.add(new Label("Monthly Payment"));
p1.add(jtfMonthlyPayment);
p1.add(new Label("Total Payment"));
p1.add(jtfTotalPayment);
p1.setBorder(new
TitledBorder("Enter interest rate, year and loan amount"));
// Panel p2 to hold the button
JPanel p2 = new JPanel();
p2.setLayout(new FlowLayout(FlowLayout.RIGHT));
p2.add(jbtComputeMortgage);
// Add the components to the applet
getContentPane().add(p1, BorderLayout.CENTER);
getContentPane().add(p2, BorderLayout.SOUTH);
// Register listener
jbtComputeMortgage.addActionListener(this);
/** Handle the "Compute Mortgage" button */
public void actionPerformed(ActionEvent e) {
if (e.getSource() == jbtComputeMortgage) {
// Get values from text fields
double interest = (Double.valueOf(
jtfAnnualInterestRate.getText())).doubleValue();
int year =
(Integer.valueOf(jtfNumOfYears.getText())).intValue();
double loan =
(Double.valueOf(jtfLoanAmount.getText())).doubleValue();
// Create a mortgage object
Mortgage m = new Mortgage(interest, year, loan);
// Display monthly payment and total payment
jtfMonthlyPayment.setText(String.valueOf(m.monthlyPayment()));
jtfTotalPayment.setText(String.valueOf(m.totalPayment()));
class MenuDemo extends JFrame implements ActionListener {
// Text fields for Number 1, Number 2, and Result
private JTextField jtfNum1, jtfNum2, jtfResult;
// Buttons "Add", "Subtract", "Multiply" and "Divide"
private JButton jbtAdd, jbtSub, jbtMul, jbtDiv;
// Menu items "Add", "Subtract", "Multiply","Divide" and "Close"
private JMenuItem jmiAdd, jmiSub, jmiMul, jmiDiv, jmiClose;
/** Main method */
public static void main(String[] args) {
MenuDemo frame = new MenuDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
/** Default constructor */
public MenuDemo() {
setTitle("Menu Demo");
// Create menu bar
JMenuBar jmb = new JMenuBar();
// Set menu bar to the frame
setJMenuBar(jmb);
// Add menu "Operation" to menu bar
JMenu operationMenu = new JMenu("Operation");
operationMenu.setMnemonic('O');
jmb.add(operationMenu);
// Add menu "Exit" in menu bar
JMenu exitMenu = new JMenu("Exit");
exitMenu.setMnemonic('E');
jmb.add(exitMenu);
// Add menu items with mnemonics to menu "Operation"
operationMenu.add(jmiAdd= new JMenuItem("Add", 'A'));
operationMenu.add(jmiSub = new JMenuItem("Subtract", 'S'));
operationMenu.add(jmiMul = new JMenuItem("Multiply", 'M'));
operationMenu.add(jmiDiv = new JMenuItem("Divide", 'D'));
exitMenu.add(jmiClose = new JMenuItem("Close", 'C'));
// Set keyboard accelerators
jmiAdd.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_A, ActionEvent.CTRL_MASK));
jmiSub.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_S, ActionEvent.CTRL_MASK));
jmiMul.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_M, ActionEvent.CTRL_MASK));
jmiDiv.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_D, ActionEvent.CTRL_MASK));
// Panel p1 to hold text fields and labels
JPanel p1 = new JPanel();
p1.setLayout(new FlowLayout());
p1.add(new JLabel("Number 1"));
p1.add(jtfNum1 = new JTextField(3));
p1.add(new JLabel("Number 2"));
p1.add(jtfNum2 = new JTextField(3));
p1.add(new JLabel("Result"));
p1.add(jtfResult = new JTextField(4));
jtfResult.setEditable(false);
// Panel p2 to hold buttons
JPanel p2 = new JPanel();
p2.setLayout(new FlowLayout());
p2.add(jbtAdd = new JButton("Add"));
p2.add(jbtSub = new JButton("Subtract"));
p2.add(jbtMul = new JButton("Multiply"));
p2.add(jbtDiv = new JButton("Divide"));
// Add panels to the frame
getContentPane().setLayout(new BorderLayout());
getContentPane().add(p1, BorderLayout.CENTER);
getContentPane().add(p2, BorderLayout.SOUTH);
// Register listeners
jbtAdd.addActionListener(this);
jbtSub.addActionListener(this);
jbtMul.addActionListener(this);
jbtDiv.addActionListener(this);
jmiAdd.addActionListener(this);
jmiSub.addActionListener(this);
jmiMul.addActionListener(this);
jmiDiv.addActionListener(this);
jmiClose.addActionListener(this);
/** Handle ActionEvent from buttons and menu items */
public void actionPerformed(ActionEvent e) {
String actionCommand = e.getActionCommand();
// Handle button events
if (e.getSource() instanceof JButton) {
if ("Add".equals(actionCommand))
calculate('+');
else if ("Subtract".equals(actionCommand))
calculate('-');
else if ("Multiply".equals(actionCommand))
calculate('*');
else if ("Divide".equals(actionCommand))
calculate('/');
else if (e.getSource() instanceof JMenuItem) {
// Handle menu item events
if ("Add".equals(actionCommand))
calculate('+');
else if ("Subtract".equals(actionCommand))
calculate('-');
else if ("Multiply".equals(actionCommand))
calculate('*');
else if ("Divide".equals(actionCommand))
calculate('/');
else if ("Close".equals(actionCommand))
System.exit(0);
/** Calculate and show the result in jtfResult */
private void calculate(char operator) {
// Obtain Number 1 and Number 2
int num1 = (Integer.parseInt(jtfNum1.getText().trim()));
int num2 = (Integer.parseInt(jtfNum2.getText().trim()));
int result = 0;
// Perform selected operation
switch (operator) {
case '+': result = num1 + num2;
break;
case '-': result = num1 - num2;
break;
case '*': result = num1 * num2;
break;
case '/': result = num1 / num2;
// Set result in jtfResult
jtfResult.setText(String.valueOf(result));
Original 2 button menu example....
// Exercise11_8.java: Create multiple windows
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Exercise11_8 extends JFrame implements ActionListener {
// Declare and create a frame: an instance of MenuDemo
MenuDemo calcFrame = new MenuDemo();
// Declare and create a frame: an instance of RadioButtonDemo
RadioButtonDemo lightsFrame = new RadioButtonDemo();
// Declare two buttons for displaying frames
private JButton jbtCalc;
private JButton jbtLights;
public static void main(String[] args) {
Exercise11_8 frame = new Exercise11_8();
frame.setSize( 400, 70 );
frame.setTitle("Exercise 11.8: Multiple Windows Demo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
public Exercise11_8() {
// Add buttons to the main frame
getContentPane().setLayout(new FlowLayout());
getContentPane().add(jbtCalc = new JButton("Simple Calculator"));
getContentPane().add(jbtLights = new JButton("Traffic Lights"));
// Register the main frame as listener for the buttons
jbtCalc.addActionListener(this);
jbtLights.addActionListener(this);
public void actionPerformed(ActionEvent e) {
String arg = e.getActionCommand();
if (e.getSource() instanceof JButton)
if ("Simple Calculator".equals(arg)) {
//show the MenuDemo frame
jbtCalc.setText("Hide Simple Calculator");
calcFrame.pack();
calcFrame.setVisible(true);
else if ("Hide Simple Calculator".equals(arg)) {
calcFrame.setVisible(false);
jbtCalc.setText("Simple Calculator");
else if ("Traffic Lights".equals(arg)) {
//show the CheckboxGroup frame
lightsFrame.pack();
jbtLights.setText("Hide Traffic Lights");
lightsFrame.setVisible(true);
else if ("Hide Traffic Lights".equals(arg)) {
lightsFrame.setVisible(false);
jbtLights.setText("Traffic Lights");
class RadioButtonDemo extends JFrame
implements ItemListener {
// Declare radio buttons
private JRadioButton jrbRed, jrbYellow, jrbGreen;
// Declare a radio button group
private ButtonGroup btg = new ButtonGroup();
// Declare a traffic light display panel
private Light light;
/** Main method */
public static void main(String[] args) {
RadioButtonDemo frame = new RadioButtonDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(250, 170);
frame.setVisible(true);
/** Default constructor */
public RadioButtonDemo() {
setTitle("RadioButton Demo");
// Add traffic light panel to panel p1
JPanel p1 = new JPanel();
p1.setSize(200, 200);
p1.setLayout(new FlowLayout(FlowLayout.CENTER));
light = new Light();
light.setSize(40, 90);
p1.add(light);
// Put the radio button in Panel p2
JPanel p2 = new JPanel();
p2.setLayout(new FlowLayout());
p2.add(jrbRed = new JRadioButton("Red", true));
p2.add(jrbYellow = new JRadioButton("Yellow", false));
p2.add(jrbGreen = new JRadioButton("Green", false));
// Set keyboard mnemonics
jrbRed.setMnemonic('R');
jrbYellow.setMnemonic('Y');
jrbGreen.setMnemonic('G');
// Group radio buttons
btg.add(jrbRed);
btg.add(jrbYellow);
btg.add(jrbGreen);
// Place p1 and p2 in the frame
getContentPane().setLayout(new BorderLayout());
getContentPane().add(p1, BorderLayout.CENTER);
getContentPane().add(p2, BorderLayout.SOUTH);
// Register listeners for check boxes
jrbRed.addItemListener(this);
jrbYellow.addItemListener(this);
jrbGreen.addItemListener(this);
/** Handle checkbox events */
public void itemStateChanged(ItemEvent e) {
if (jrbRed.isSelected())
light.turnOnRed(); // Set red light
if (jrbYellow.isSelected())
light.turnOnYellow(); // Set yellow light
if (jrbGreen.isSelected())
light.turnOnGreen(); // Set green light
// Three traffic lights shown in a panel
class Light extends JPanel {
private boolean red;
private boolean yellow;
private boolean green;
/** Default constructor */
public Light() {
turnOnGreen();
/** Set red light on */
public void turnOnRed() {
red = true;
yellow = false;
green = false;
repaint();
/** Set yellow light on */
public void turnOnYellow() {
red = false;
yellow = true;
green = false;
repaint();
/** Set green light on */
public void turnOnGreen() {
red = false;
yellow = false;
green = true;
repaint();
/** Display lights */
public void paintComponent(Graphics g) {
super.paintComponent(g);
if (red) {
g.setColor(Color.red);
g.fillOval(10, 10, 20, 20);
g.setColor(Color.black);
g.drawOval(10, 35, 20, 20);
g.drawOval(10, 60, 20, 20);
g.drawRect(5, 5, 30, 80);
else if (yellow) {
g.setColor(Color.yellow);
g.fillOval(10, 35, 20, 20);
g.setColor(Color.black);
g.drawRect(5, 5, 30, 80);
g.drawOval(10, 10, 20, 20);
g.drawOval(10, 60, 20, 20);
else if (green) {
g.setColor(Color.green);
g.fillOval(10, 60, 20, 20);
g.setColor(Color.black);
g.drawRect(5, 5, 30, 80);
g.drawOval(10, 10, 20, 20);
g.drawOval(10, 35, 20, 20);
else {
g.setColor(Color.black);
g.drawRect(5, 5, 30, 80);
g.drawOval(10, 10, 20, 20);
g.drawOval(10, 35, 20, 20);
g.drawOval(10, 60, 20, 20);
/** Set preferred size */
public Dimension getPreferredSize() {
return new Dimension(40, 90);
class MenuDemo extends JFrame implements ActionListener {
// Text fields for Number 1, Number 2, and Result
private JTextField jtfNum1, jtfNum2, jtfResult;
// Buttons "Add", "Subtract", "Multiply" and "Divide"
private JButton jbtAdd, jbtSub, jbtMul, jbtDiv;
// Menu items "Add", "Subtract", "Multiply","Divide" and "Close"
private JMenuItem jmiAdd, jmiSub, jmiMul, jmiDiv, jmiClose;
/** Main method */
public static void main(String[] args) {
MenuDemo frame = new MenuDemo();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
/** Default constructor */
public MenuDemo() {
setTitle("Menu Demo");
// Create menu bar
JMenuBar jmb = new JMenuBar();
// Set menu bar to the frame
setJMenuBar(jmb);
// Add menu "Operation" to menu bar
JMenu operationMenu = new JMenu("Operation");
operationMenu.setMnemonic('O');
jmb.add(operationMenu);
// Add menu "Exit" in menu bar
JMenu exitMenu = new JMenu("Exit");
exitMenu.setMnemonic('E');
jmb.add(exitMenu);
// Add menu items with mnemonics to menu "Operation"
operationMenu.add(jmiAdd= new JMenuItem("Add", 'A'));
operationMenu.add(jmiSub = new JMenuItem("Subtract", 'S'));
operationMenu.add(jmiMul = new JMenuItem("Multiply", 'M'));
operationMenu.add(jmiDiv = new JMenuItem("Divide", 'D'));
exitMenu.add(jmiClose = new JMenuItem("Close", 'C'));
// Set keyboard accelerators
jmiAdd.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_A, ActionEvent.CTRL_MASK));
jmiSub.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_S, ActionEvent.CTRL_MASK));
jmiMul.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_M, ActionEvent.CTRL_MASK));
jmiDiv.setAccelerator(
KeyStroke.getKeyStroke(KeyEvent.VK_D, ActionEvent.CTRL_MASK));
// Panel p1 to hold text fields and labels
JPanel p1 = new JPanel();
p1.setLayout(new FlowLayout());
p1.add(new JLabel("Number 1"));
p1.add(jtfNum1 = new JTextField(3));
p1.add(new JLabel("Number 2"));
p1.add(jtfNum2 = new JTextField(3));
p1.add(new JLabel("Result"));
p1.add(jtfResult = new JTextField(4));
jtfResult.setEditable(false);
// Panel p2 to hold buttons
JPanel p2 = new JPanel();
p2.setLayout(new FlowLayout());
p2.add(jbtAdd = new JButton("Add"));
p2.add(jbtSub = new JButton("Subtract"));
p2.add(jbtMul = new JButton("Multiply"));
p2.add(jbtDiv = new JButton("Divide"));
// Add panels to the frame
getContentPane().setLayout(new BorderLayout());
getContentPane().add(p1, BorderLayout.CENTER);
getContentPane().add(p2, BorderLayout.SOUTH);
// Register listeners
jbtAdd.addActionListener(this);
jbtSub.addActionListener(this);
jbtMul.addActionListener(this);
jbtDiv.addActionListener(this);
jmiAdd.addActionListener(this);
jmiSub.addActionListener(this);
jmiMul.addActionListener(this);
jmiDiv.addActionListener(this);
jmiClose.addActionListener(this);
/** Handle ActionEvent from buttons and menu items */
public void actionPerformed(ActionEvent e) {
String actionCommand = e.getActionCommand();
// Handle button events
if (e.getSource() instanceof JButton) {
if ("Add".equals(actionCommand))
calculate('+');
else if ("Subtract".equals(actionCommand))
calculate('-');
else if ("Multiply".equals(actionCommand))
calculate('*');
else if ("Divide".equals(actionCommand))
calculate('/');
else if (e.getSource() instanceof JMenuItem) {
// Handle menu item events
if ("Add".equals(actionCommand))
calculate('+');
else if ("Subtract".equals(actionCommand))
calculate('-');
else if ("Multiply".equals(actionCommand))
calculate('*');
else if ("Divide".equals(actionCommand))
calculate('/');
else if ("Close".equals(actionCommand))
System.exit(0);
/** Calculate and show the result in jtfResult */
private void calculate(char operator) {
// Obtain Number 1 and Number 2
int num1 = (Integer.parseInt(jtfNum1.getText().trim()));
int num2 = (Integer.parseInt(jtfNum2.getText().trim()));
int result = 0;
// Perform selected operation
switch (operator) {
case '+': result = num1 + num2;
break;
case '-': result = num1 - num2;
break;
case '*': result = num1 * num2;
break;
case '/': result = num1 / num2;
// Set result in jtfResult
jtfResult.setText(String.valueOf(result));
Mortgage applet code....
// MortgageApplet.java: Applet for computing mortgage payments
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.TitledBorder;
public class MortgageApplet extends JApplet
implements ActionListener {
// Declare and create text fields for interest rate
// year, loan amount, monthly payment, and total payment
private JTextField jtfAnnualInterestRate = new JTextField();
private JTextField jtfNumOfYears = new JTextField();
private JTextField jtfLoanAmount = new JTextField();
private JTextField jtfMonthlyPayment = new JTextField();
private JTextField jtfTotalPayment = new JTextField();
// Declare and create a Compute Mortgage button
private JButton jbtComputeMortgage = new JButton("Compute Mortgage");
/** Initialize user interface */
public void init() {
// Set properties on the text fields
jtfMonthlyPayment.setEditable(false);
jtfTotalPayment.setEditable(false);
// Right align text fields
jtfAnnualInterestRate.setHorizontalAlignment(JTextField.RIGHT);
jtfNumOfYears.setHorizontalAlignment(JTextField.RIGHT);
jtfLoanAmount.setHorizontalAlignment(JTextField.RIGHT);
jtfMonthlyPayment.setHorizontalAlignment(JTextField.RIGHT);
jtfTotalPayment.setHorizontalAlignment(JTextField.RIGHT);
// Panel p1 to hold labels and text fields
JPanel p1 = new JPanel();
p1.setLayout(new GridLayout(5, 2));
p1.add(new Label("Annual Interest Rate"));
p1.add(jtfAnnualInterestRate);
p1.add(new Label("Number of Years"));
p1.add(jtfNumOfYears);
p1.add(new Label("Loan Amount"));
p1.add(jtfLoanAmount);
p1.add(new Label("Monthly Payment"));
p1.add(jtfMonthlyPayment);
p1.add(new Label("Total Payment"));
p1.add(jtfTotalPayment);
p1.setBorder(new
TitledBorder("Enter interest rate, year and loan amount"));
// Panel p2 to hold the button
JPanel p2 = new JPanel();
p2.setLayout(new FlowLayout(FlowLayout.RIGHT));
p2.add(jbtComputeMortgage);
// Add the components to the applet
getContentPane().add(p1, BorderLayout.CENTER);
getContentPane().add(p2, BorderLayout.SOUTH);
// Register listener
jbtComputeMortgage.addActionListener(this);
/** Handle the "Compute Mortgage" button */
public void actionPerformed(ActionEvent e) {
if (e.getSource() == jbtComputeMortgage) {
// Get values from text fields
double interest = (Double.valueOf(
jtfAnnualInterestRate.getText())).doubleValue();
int year =
(Integer.valueOf(jtfNumOfYears.getText())).intValue();
double loan =
(Double.valueOf(jtfLoanAmount.getText())).doubleValue();
// Create a mortgage object
Mortgage m = new Mortgage(interest, year, loan);
// Display monthly payment and total payment
jtfMonthlyPayment.setText(String.valueOf(m.monthlyPayment()));
jtfTotalPayment.setText(String.valueOf(m.totalPayment()));
}Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() { -
I bought a free app(Documents by Readdle) for free. In my account I had $6.37 but now I have $3.19!! I don't understand why because it was a free app? What do I do and how do I get my money back?
Hi caw52,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
I have done the softer update and now this system request a connection with a Mini HDMI connector for iTunes I don't understand why ?
DO I HAVE TO HAVE THE MINI HDMI CONNECTOR TO COMPLETE THE SOFTER UPDATE PROCESS ?You might be seeing a Micro USB cable (Not HDMI) that is because your Apple Tv is in Recovery Mode due to some reason and it needs to be Restored by connecting it to iTunes on your Computer. So if you have a Micro USB cable ( which comes with Android Smart Phones ) then try to connect your Apple Tv to your computer using the same and with the help of iTunes Restore your Apple Tv to Factory Settings. Go through the below Apple Support kb which says " If your Apple TV still does not respond or if you were unable to follow the above steps "
http://support.apple.com/kb/ht4367
Maybe you are looking for
-
Odata JDBC Service: getting NullPointerException: while trying to invoke the method
Hi, I am testing OData, for that I followed the steps given in this tutorial: http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/06/10/creating-an-odata-service-based-on-sap-gateway-soap-jdbc-and-jpa-data-sources-ba It wasn't w
-
Is there a size limit on photo attachments that can be opened
whenever i try to open a large photo attachment (most recently, i tried a 3.5mb jpeg i sent myself from one email account to another), the iphone will download the entire file, but instead of opening the file i am given the boxed ? (question mark) wi
-
Console TDM - A CDM-like login manager
Inspired by CDM, I wrote a login manager called TDM. TDM is also written in pure bash, and it has a config tool tdmctl, whose usage is similar to systemctl. TDM has the following features: Use links or scripts to set up the X sessions Use tdminit
-
IDoc (Outbound & Inbound) PO to ECC (2 clients)
Hi As part of testing I need to send outbound idocs from 2 separate clients in ECC to PO Also I need to send inbound idocs to 2 separate clients of ECC from PO With one client everything is working fine. What extra steps need to be done for 2 clients
-
Is there anyway to take photo of stars by iphone6
is there anyway to take photo of stars by iphone6 ?