HT6378 Is anyone havig trouble with the date of uploaded photos?

I am using iCloud Photo Library since its launch, and I am uploading all of my pictures, even those taken with my DSLR camera. The beta app works fine, but the photos I uploaded are presented with the date different from that one taken. I looked at the time and date of any modification, but even this is different from the date registered on the iCLoud Photo Library. Is anyone having the same problem?

The uploaded files still contain the original digitized date/time. You can test this by downloading or emailing a photo from iCloud.com or from your iPad/iPhone and then checking the metadata. This is also the case for photos taken on the iPhone or iPad and uploaded to iCloud Photo Library directly. Again, the digitized date/time is correct in the image file.

Similar Messages

  • Hi, does anyone have issues with the Camera app uploading photos to the photo album? This happens after I downloaded iOS8.1.2

    I have just updated my iPhone iOS to 8.1.2. Since then, the camera is not able to upload photos to the album immediately and some are even lost. Does anyone have the same issue or know how to fix this?

    I found it much easier to have my apps on the last page and let the pre-loaded apps stay where they are on the first couple of pages.  While I'd prefer to have my apps first, at least they are all together.  I found it far too much work to try to move them around another way, plus it shifts some things around in a way that I did not intend.
    BTW, I definitely prefer the Fascinate's arrangement of the icons over the Droid X2, which is always in alphabetical order in a vertical non-stop continuum.

  • Anyone having trouble with the new update for 2010 mac book air 10.8.2?

    Anyone having trouble with the new update for 2010 mac book air 10.8.2 ? My 2010 Macbook Air has crashed 15times since the 10.8.2 update. Have only once since owning it.

    Turned out the hardware was bad.  Apple exchanged it for a new Mac Air and the new trackpad works great.  Thank goodness it was a defect.  If the trackpads all worked like that I would have been bummed.

  • Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Does anyone have trouble with the iPad booting you off of the internet?  I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

    Jon....
    Don't confuse the threads here with 'typical' experience.  Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
    If you are having repeated crashes it is really pretty basic.  You either have a physical problem with your pad, or you are using too much memory.
    The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now.  That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.  
    This happens, more often than not, when using safari with multiple windows open on graphic intense sites.  It can also happen with a memory intensive game, and residual apps in the background.
    Double  tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
    If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

  • Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Is anyone having trouble with the cursor jumping around since Lion was installed on your computer? Never happened until Lion.

    Is anyone having trouble with the cursor jumping around while typing since you installed Lion? Never had any problems of that sort prior to Lion. I have an older machine. I believe it is a 2008 MacBook Pro. Especially happens with Yahoo. I am baffled.

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Is anyone havong trouble with the latest i tunes down load

    is anyone having trouble with the latest i tunes download

    First, contact Focusrite and make them aware of your LM/Logic problems. I'm communicating with a rep who said he wasn't aware of any issues with LM and Logic.
    Next, I speculate the latest driver of the Version 2 software can't live up to it's claims of variable latency. When I follow the minimum latency of 1032 for the LM manager (as posted on their support site), LM and Logic behave well. The problem for me is I never use 512 in Logic.

  • Is anyone having trouble with the keyboard sensitivity on the iphone?

    is anyone having trouble with the keyboard sensitivity on the iphone? I am typing, but can sometimes get a delay of 5 seconds or more before the letters actually appear on the screen.
    This is across all apps.
    Does not seem to be an issue with opening apps or scrolling etc., but only with the keyboard.
    Thanks.
    Nick

    I had this problem after downloading Dropbox. Once I uninstalled it, my keyboard was fine.

  • Has anyone had trouble with the middle mouse (open in new tab) button lately?

    Hi gang. Since v29 came out, I have been having trouble with the middle mouse (open in new tab) button.
    Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times.
    Has anyone else had any problems? I use an add-on called
    '''''[https://addons.mozilla.org/en-US/firefox/addon/mclickfocustab/?src=collection&collection_id=33bf10fa-666d-45a2-9bc9-491ce21671c6 MClickFocusTab]'''''
    I disabled it but the problem was still there.

    ''''' "Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times." '''''
    Sounds like a mouse on its' way to mouse-heaven. Seriously, the exact symptoms I have seen with a dozen 3 button mouse's (?meese - ?mice) over the last 15 years. <br />
    Not registering a click is usually due to a dirty contact. And the "double-click" is when the flat spring looses tension and bounces.
    I have had similar happen with the left button, too. But when it happens to that button it is more noticeable much sooner.
    I bought a box of a dozen A4D house branded infrared wireless 3-button mouse's for like $24.00 back in 2000 that were on clearance because the driver disk didn't support W2K, only Win95, 98, and NT4. I got newer drivers from the A4D website and wore all 12 out over the 8 or 9 years. I even fixed a few that broke from the parts from other broken mouse's. I still have 6 or 7 of them laying in the "needs to be fixed" box under my workbench. I'll probably never fix them though, the nano receiver USB mouses I have been using for the 4 or 5 years have much better battery life and lately only need one AA battery.

  • Anyone having trouble with the home button after upgrading to Ios6

    Is anyone having problems with the home button not working correctly after down loading ios6?

    I haven't but try resetting...
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then restart your iPad.
    No data will be lost as a result of a reset.

  • Is anyone having trouble with the singing santa app?

    Anyone having trouble using the Singing Santa app. It worked for me last Christmas. Can't get it to process video this Christmas. I've deleted the app and downloaded it again, but I am having the same problem.

    Have you tried turning your iPod off, then back on? Or a reset, press and hold both the power and home buttons together until the Apple logo appears, about 15 seconds+/-, then release both buttons. If still no joy, try going into Settings>General>Reset tap tap Reset All Settings. If problem continues connect to your computer, make backups of the stuff on your iPod to your computer, then Restore from backup, if still not working Restore to New. then reinstall your stuff. If restore to new does not correct you may have a hardware issue, contact your Apple store or Apple Genius Bar, make an appointment and have your iPod evaluated. Good luck, Cheers.

  • Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

    Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

    You will not belive how I accidently solved this - !!!
    Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
    I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
    so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
    I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
    what a mad techno world we live in! :-)
    Dave

  • Anyone having trouble with the snooze function for the alarm?  ...after update.

    I've been using my phone as an alarm clock lately and after the latest firmware update I can't get the snooze to work on the alarm.  The alarm goes off like it should and I select "snooze" with the ring but the alarm never goes off again.  I was almost late to work the first time it did it.
    Just checking to see if anyone else has experienced this.  I have to say, I am not impressed with the latest "update" at all and have spent WAY too much time trying to get things to work again.  If it wasn't a company issued phone I would've dropped the service long ago (no service at my desk at work or at home).

    Try going into settings, apps and then manage apps.  At the top scroll over and make sure all is selected.  Scroll down and find the alarm app and tap on it.  If clear data is populated then tap on it.  After that tap on force close...you will get a warning but just press ok.  If clear data is grayed out at least try force stop.  Set your alarm back up and see if that works. 

  • Anyone have trouble with the internal speakers?

    I had my internal speakers reset in May after an update download messed them up. NOw they aren't working again. anyone else having this problem?

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    3. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    4. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    5. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    6. Reset the NVRAM.
    7. Reset the SMC.
    8. Reinstall OS X after backing up all data.
    9. Make a "Genius" appointment at an Apple Store.

  • Does anyone have trouble with the latest E71's fir...

    I' ve just upgraded my E71's Firmware, now i get in trouble with this FW. There are some problems:
    1. My device always auto restart 
    2. When i'm charging my E71, sometimes, it appears a message " Simcard not available"
    3. My E71 is full charging but after one day it need help with a message " low battery "

    I don't get any of those problems and been running the 300 for many months.
    What I suggest you do, is BACK UP YOUR PHONE BEFORE YOU start formatting and erasing!
    Then, reset or reformat your phone as described by the previous poster, additionally it could be something in your backup thats causing the problem.
    Second, instead of reformatting the handset you can reflash the SAME firmware to the handset again with NSU, there might have been a problem when it copied it into the flash memory (unlikely as it has a checksum) however you cannot rule that out.
    If its having SIM card problems - it could be related to this:
    /discussions/board/message?board.id=topfaq&thread.id=119 OK it says memory card, but could be a similar issue.
    Additionally you could charge or get the battery from another phone and allow yours to discharge it to until the phone switches off.
    I would at least reflash the firmware myself again, I have seen a difference with handsets when this is done. Why? I don't know.
    Shunts...
    Message Edited by shuntfield on 15-Nov-2009 02:14 PM
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

Maybe you are looking for

  • How i know Authorization object in system?

    Hi all, i create new BAdi with Enhancement Spot: ZWORKORDER_GOODSMVT (copy WORKORDER_GOODSMVT in standard SAP) now i have Badi definition: ZWORKORDER_GOODSMVT with Interface: ZIF_EX_WORKORDER_GOODSMVT all ok. now how i can see authorization object in

  • Playlist creator for mp3s and wma's

    I wrote the following pretty quickly this morning to traverse a directory and it's child directories to look for any mp3/wma files in that directory and make a windows media m3u playlist (basically, the file names separated by newlines). I thought I'

  • Corrupt icons in System Preferences panel?

    For some strange reason, the 'Startup Disk' icon in my system preferences panel has changed...it looks like a giant light switch and you can see a bit of a border around it. Is there any way to reset this back to normal? You can check out an image he

  • Bitrate too high

    My project is a video with three different audio versions and two subtitle tracks, linked by a menu. It says the project is 1.9GB. However, when I ask to build it stops part way through says 'Video Bitrate Too High'. I've changed the settings in the

  • Quality Management - Usage Decision error

    Hi all, My scenerio is - There is a material ABC which is procured from the supplier. The Quality of the material is 'below standards'. However, material ABC, in Tcode QA11 Usage decision was done as ACC1 (accepted). Since the material ABC is not mee