HT6572 10.10.1 update killed my wifi!!

I updated to 10.10 and have had no problems. Today I install this 10.10.1 update and now my wifi is completely unreliable! None of the fixes that people have mentioned have worked for me. Bluetooth makes no difference, changing 5g channels does not help. I only have a connection for about a minute and then it stops working altogether. Pings to my router correlate to my connectivity but they fluctuate anywhere from 1ms to 500ms and then suddenly I get "Request timeout for icmp_seq nnn". At that point, if I switch to another network or turn on and off wifi I restablish my ping and connectivity (again ranging from 1ms to 400+ms pings just to the router next to my computer).
This is ridiculous!! How does the supposed fix for wifi problems create problems I never had with 10.10.0?
This needs to be fixed immediately!

UPDATE: Solved Wifi issue with MBA 2013... so far!
Hardware:
MBA 2013
Clearwire Clear Spot 4G Apollo
ISSUE: after Yosemite update (and 10.10.1 update) wifi connection continuously dropped and reconnected. No issues before Yosemite.
I was able to test using several wifi networks, which other than being a little slower than expected, all worked with no connecting issues.
Attempted fixes: All the standard ones found in this forum and other places (ie. delete network settings and preferences. Delete and recreate wifi network with new name... the list goes on.) Some very temporarily seemed to solve the issue... only to see it return after a few quick surfing sessions.
SOLVE: (at least for now... I'll update this every 24 hours for the next few days)
While in an in-depth conversation with high level Apple tech Scott... I learned that deleting the wifi preferences and settings files wasn't all the files related to wifi connection. Keychain holds the wifi passwords.
I then changed the settings in my modem to not require a password. It connected after asking me "this network previously was protected by a password. Are you sure you want to join it?" (or something along those lines) I agreed and was connected without any drop offs... Yah!!!
After a few hours of success, I changed it to WPA2 passworded (same question box popped up, I agreed)... connect with no issues... Yah again!!!
AFTER 24 HOURS: Still successfully connected!!!
NOTE: I believe this issue is caused by a corrupted keychain entry. Apples help forum shows other high level network techs have notice this issue too.
I'm assuming that just deleting the keychain related to this wifi connection would accomplish the same results. You would just need to re-enter the wifi password.
Watch for updates every 24 hours for the next few days... any feedback would be great. Let me know if this helped your issue.

Similar Messages

I have an iPhone 4S with Sprint, I had to replace my last phone after the newest update killed my wifi button. Now my new phone won't get 3G at all. I have tried turning my phone off/on, resetting my networks, and turning airplane mode off and on.

I have an iPhone 4S with sprint. I had to replace my phone after the new update killed my wifi button and wouldn't let me turn my phone off. Since I've had my new phone, I haven't been getting 3G. I have tried resetting my networks, Turing airplane mode off/on and restarting my phone. Nothing seems to work. Any info on what I should do next would be great.

If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.

8.1.3 update killed my wifi

Ok, my iPhone 4S worked fine on 8.1.2. After today's update to 8.1.3, my wifi is no longer working. The wifi button under setting is grayed out and disabled!!!
I have done a complete restore from iTunes and set it up as a new iPhone - wifi disabled and grayed out.
Restored from my backup - same thing, wifi disabled and button grayed out.
So now I have a iPhone 4S with no wifi.
Apple OS updates really ***** these days.
Anyone has the same experience with the 8.1.3 update on an iPhone 4S? Suggestions on how to fix it?

Frank0904 wrote:
Thank you all guys. I finally get it to work.
I believe that it is a software issue. Right before the 8.1.3 update, wifi is working perfectly. I put it on the table and started the update. Afterwards, the wifi went dead. The phone was sitting on a table and plugged in. So nothing could have kill the wifi. I don't believe in coincidents, my wifi chip decided to go bonkers right after I do a software update? good try Apple. You screwed up the update, so just admit it.
I read about the so called 'reflowing' the wifi chip. I don't believe heat from a blow dryer can 'reflow' anything. I gave it a try anyway, no help.
Finally, I turn on the airplane mode, then do a phone reset (home + sleep button for 10secs). Upon rebooting, I turned off airplane mode and the wifi button is enabled again. Just like that.
I hope this can help others who have experienced the same issue.
So, in other words, what you did was essentially reset the connection for the wi-fi, just like the article advised. If it was the iOS, that wouldn't have fixed it. It was some sort of setting issue.
The iOS cannot cause the wi-fi to gray out permanently. It doesn't work that way.

Carrier Update killed my wifi

I got the Verizon Carrier update popup, followed the instructions, when the iPhone came back up, wifi wasn't working. It sees my network but won't connect. I reset the network settings, nothing. My wife's iPhone did NOT get the update popup and her wifi is just fine. My laptop connects just fine as well. What do I do now?

Hey jonboyw,
This certainly is a bit strange. Let's see if we can get your wi-fi to connect properly because that is an important part of the phone. First off, have you tried any other networks besides your home network? Will it work then? I understand it works on your computer, but let's try your phone with another network.
Also, have you "forgotten" the network and then put in the passcode again? I see that you reset network settings, and just to make sure that went through, were you prompted to put in your passcode again when trying to connect? Other than that, is your data working well on the device? Please keep us updated!
Thanks!
MichelleG_VZW
Please follow us on Twitter @vzwsupport

Why is iOS 8.2 not updating on iPhone 5S? It got me to Agree and nothing happens. Am doing the update via a Wifi connection.

Hello,
Why is iOS 8.2 not updating on iPhone 5S? It got the user to Agree to the Terms and Conditions but nothing happens. The user is doing the update via a Wifi connection. Current OS version on the device is 8.1.3. User did a hard reboot of the device and still the same result. Not tried using iTunes as a workaround as we want to know why it's not updating via a Wifi connection. Storage space available is 9G.
If you know of someone who is experiencing the same issue, please let me know the fix. Thank you.
Christina

1. I do not know if this will help you or not. In researching this issue with my wife's iPhone 5c 8GB, the most common answer you will get is to adjust this or that setting, and disable this or that App. These at best are only a band-aide solution at all. The best reply I got was from a Verizon Rep that stated "By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress, or information is being back-up wirelessly and the phone goes dormant, it will switch to use cellular data if it is left on". Afterwards, I discovered the exact same information here on the Apple Support Forum to support this statement.
2. Later onward, I read that if you keep your iPhone connected to a power source, it will prevent it from going dormant. In which case, this will prevent the iPhone from turning off the WiFi, and keep it connected to the WiFi. So far, this has help the most in controlling the amount of data usage being used, by my wife's iPhone.
3. Here is a web site that may help you at http://www.iphonehacks.com/2014/09/fix-ios-8-wifi-problems.html .....

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.
Is it worth 900 dollars for a smartphone that has so many issues ? After 3 updates? After 1 month? I wasted 2 gb of mobile internet cause of ios 8.
And battery is terrible.

same here, iphone 6 plus 64 gb.
additionally in 5 ghz networks the wifi connection is very slow or there is no data transfer possible ( the wifi icon is already there and in a good status) other devices hasn't any problems in that network

Latest Acrobat X Update Killed Com1

The latest Acrobat X update killed my Com1 port. Yes, I still use Com1 to communicate with my ham radio. So if any Adobe guy is reading the discussions in this form, please fix this bug. BTW, why do I have to call tech support, why can't I send you guys an e-mail.
. . . JohnB

To correct the port problem of Adobe PDF Printer after the application of A10.0.1 patch kindly follow the below steps (they require Admin privileges):
1.      Go to Devices and Printers.
2.      Right Click on the Adobe PDF printer and click on Remove Device (Win 7). This will delete the Adobe PDF printer.
3.      Go to Programs and Features (Win 7)
4.      Select Adobe Acrobat X Pro or Standard and click on Change
5.      Select Repair and follow instructions to complete repair
6.      After the repair is done you will have correct settings of Adobe PDF printer and also Adobe Acrobat version 10.0.1.

IOS 7 (7.1.2) Update disabled my wifi ***?? HELP

So I foolishly only have my backups in the iCloud I just did the update on my 4S and the wifi became disabled. So I restored my device to the latest version as there is no other choice. 7.1.2 screwed me. So even now my wifi is now disabled - so what does that mean???
I\ll tell you. It means I can't restore anything from my iCloud. I'm absolutely screwed. The option isn't even available at the login screen. When I restore the device and setup again as a new device. The wifi is available for a matter of minutes and as soon as it joins the network it becomes disabled so I can't select it again.
I have to restore and it just repeats. This update has messed me up. HELP:.
Any ideas??? Its not the phone as it was working fine up until the second I updated. My wife's phone hasn't done the update so she is fine.

Hi ,
Welcome to the Apple Support Communities!
I understand that you cannot use your Wi-Fi after the latest update to your iPhone 4s. I know you have already done some great troubleshooting by restoring with iTunes but the Wi-Fi becomes unavailable very quickly after you set it up. Go ahead and set up the iPhone so you can get into the Setting and then follow the steps provided in the attached article.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Resolution
Follow these steps to resolve the issue:
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you complete all of these steps and still are not able to access the Wi-Fi, it may be necessary to follow the link at the bottom of the page and contact Apple Support.
Have a great day,
-Joe

Just got new ipohone 4s and used my wife's appleid to sync some apps. i now have my own appleid. i have logged in on my iphone but when i choose to update apps my wife's appleid is still there.

just got new ipohone 4s and used my wife's appleid to sync some apps. i now have my own appleid. i have logged in on my iphone but when i choose to update apps my wife's appleid is still there.

This is happening because there must be one or more apps on your phone that were purchased using your wife's Apple ID. Apps and their updates are permanently tied to the Apple ID used to purchase them, regardless of the ID you are currently using in Settings>Store. The only way to stop the prompt for your wife's ID would be to delete these apps from your phone.

MacOS X 10.4.9 Update Killed My Mac!

Today I tried to install the 10.4.9 update.
Something went wrong when installing the update and I got an error message saying that the installation was unsuccessful.
After restart my mac got stuck on the grey screen with the Apple logo and a wheel spinning forever.
Fortunately I fixed the issue: http://net3x.blogspot.com/2007/03/macos-x-1049-update-killed-my-mac.html

Most likely, you could have avoided this problem if
you had followed Apple’s instructions for properly
installing software updates:
Troubleshooting installation and software
updates
Note that Apple doesn’t mention anywhere the need to
repair permissions either before or after installing
a system update, not even for troubleshooting system
update issues. It’s the disk itself (i.e. the
filesystem) that should be verified/repaired
before installing anything. Note also that no
applications should be running while installing the
update and that you may experience unexpected results
if you have third-party system software modifications
(not normal applications) installed.
I have to call complete and utter BS on this. I have been a mac user for more than 3 years. I have updated the day of almost every major update since 10.3.1 and 10.4.9 is by far the most problem prone thing I have ever seen apple put out. I have never once had a single issue where my mac would not boot after the install of an update. Now I have updated both my MacBook and Intel Mac Mini and both were dead in the water after the install. A different software suite is on both systems, and there is no "intrusive" 3rd party software that should cause any trouble. Thanks to the instructions above I was able to get back on-line and running 10.4.9, but something really needs to be done about these issues.

T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000

gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

What benefits are there to iOS 6 update on a "wifi only" iPad 3?

I am so glad I did a little research first before following through with an the iOS 6 update on my 5 day old 64 GB iPad 3 +wifi. So far, I don't have any confidence there is any improvement on a "wifi only unit", even Siri falls short of expectations in comparison to the basic dictation software already included in iOS 5.1.1- and I am afraid to loose the excellent dictation software. Additionally, it appears the iOS6 update could cause my wifi to become inoperable. Not a risk I am willing to take after dishing out 850.00 of hard earned money to have my iPad deemed useless and becoming frustrated.
Until, there is an actual benefit or improvement to the current iOS for a "wifi only" unit I see no reason to change to iOS 6, unless of course there are some improvements in updating on a wifi only unit that I am not aware of? I really wanted to update but too worried after reading the trouble people are having. Can someone advise what benefits there are in updating to iOS 6 on a "wifi only" new ipad3? I am not sold on Maps (turn by turn doesn't work for wifi), or on Siri to make the change.
Can someone tell me what benefits there are to updating the new iPad3 which is wifi only?

Nobody here will convince since you have already made up your own mind. That's fine. It's your choice. If you aren't comfortable updating the iOS - don't do it.
I have a WiFi only new iPad and I have never had any issues at all - with anything concerning WiFi connections or networks - as long as the network was dependable. I am using my personal MIFI hotspot right now and it works great, here are the features that iOS will provide for you If you decide to make the update.
iOS 6 features and capabilities vary between devices, with some features available only with certain devices and models.
iPhone
iPad
iPod touch
iOS 6 feature
3GS
4
4S
5
2nd
generation
3rd
generation
4th
generation
Maps: Flyover
✓
✓
✓
✓
Maps: Turn-by-turn1
✓
✓
✓4
✓4
Siri2
✓
✓
✓
Facebook integration
✓
✓
✓
✓
✓
✓
✓
Shared Photo Streams
✓
✓
✓
✓
✓
✓
✓
Passbook
✓
✓
✓
✓
✓
Camera: Panorama
✓
✓
Camera: Snap stills while recording
✓
FaceTime over cellular3
✓
✓
✓
Phone: Reply/Remind
✓
✓
✓
✓
Do Not Disturb
✓
✓
✓
✓
✓
✓
✓
Mail VIPs
✓
✓
✓
✓
✓
✓
✓
Safari: Full screen view
✓
✓
✓
✓
✓
Safari: Offline reading list
✓
✓
✓
✓
✓
Guided Access
✓
✓
✓
✓
✓
✓
✓
Made for iPhone hearing aids

I want emails to be updated only in wifi, is that possible

I want emails to be updated only in wifi, is that possible in iphone4

You don't have to disable that. Just disable the mail option under tht menu. You will find it when yoou scroll down.http://cdn.gottabemobile.com/wp-content/uploads/2013/06/iOS-7-data-use-tracking- by-app.jpg
It would look something like this

Kernel updates kill my luks encrypted system

All right, this is weird. I have a 64bit system with encrypted root, home and swap partitions. To setup I followed the wiki here:
https://wiki.archlinux.org/index.php/LUKS
My swap is encrypted like described here:
https://wiki.archlinux.org/index.php/LU … sk_support
Since the updates to kernel 3.1 each new kernel update kills my system. Pacman says while upgrading
[2011-11-08 08:21] >>> Updating module dependencies. Please wait ...
[2011-11-08 08:21] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-11-08 08:21] ==> Building image from preset: 'default'
[2011-11-08 08:21] -> -k /boot/vmlinuz-linux_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img_64
[2011-11-08 08:21] ==> Starting build: 3.1.0-3-ARCH
[2011-11-08 08:21] -> Parsing hook: [base]
[2011-11-08 08:21] -> Parsing hook: [udev]
[2011-11-08 08:21] -> Parsing hook: [autodetect]
[2011-11-08 08:21] -> Parsing hook: [pata]
[2011-11-08 08:21] -> Parsing hook: [scsi]
[2011-11-08 08:21] -> Parsing hook: [sata]
[2011-11-08 08:21] -> Parsing hook: [usbinput]
[2011-11-08 08:21] -> Parsing hook: [keymap]
[2011-11-08 08:21] -> Parsing hook: [usb]
[2011-11-08 08:21] -> Parsing hook: [encrypt]
[2011-11-08 08:21] -> Parsing hook: [openswap]
[2011-11-08 08:21] -> Parsing hook: [resume]
[2011-11-08 08:21] -> Parsing hook: [filesystems]
[2011-11-08 08:21] ==> Creating gzip initcpio image: /boot/initramfs-linux.img_64
[2011-11-08 08:21] ==> Image generation successful
[2011-11-08 08:21] ==> Building image from preset: 'fallback'
[2011-11-08 08:21] -> -k /boot/vmlinuz-linux_64 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img_64 -S autodetect
[2011-11-08 08:21] ==> Starting build: 3.1.0-3-ARCH
[2011-11-08 08:21] -> Parsing hook: [base]
[2011-11-08 08:21] -> Parsing hook: [udev]
[2011-11-08 08:21] -> Parsing hook: [pata]
[2011-11-08 08:21] -> Parsing hook: [scsi]
[2011-11-08 08:21] -> Parsing hook: [sata]
[2011-11-08 08:21] -> Parsing hook: [usbinput]
[2011-11-08 08:21] -> Parsing hook: [keymap]
[2011-11-08 08:21] -> Parsing hook: [usb]
[2011-11-08 08:21] -> Parsing hook: [encrypt]
[2011-11-08 08:21] -> Parsing hook: [openswap]
[2011-11-08 08:21] -> Parsing hook: [resume]
[2011-11-08 08:21] -> Parsing hook: [filesystems]
[2011-11-08 08:21] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img_64
[2011-11-08 08:21] ==> Image generation successful
So the generation of the initramfs seems to be ok.
But when I reboot this box, I get:
running hook [openswap]
device /dev/sda4 doesn't exist or access denied
running hook [resume]
waiting 10 seconds for device /dev/mapper/swapDevice
waiting 10 seconds for device /dev/mapper/root
root device /dev/mapper/root doesn't exist. Attempting to create it.
ERROR: unable to determine major/minor number of root device /dev/mapper/root
/dev/sda4 is my swap partition. Then I get dropped to a recovery shell which I can't use because my (usb) keyboard is not working.
Now the funny part. I start the box from a install cd and chroot into the existing installation. I do a
mkinitcpio -p linux
The initramfs is regenerated and it works again! What the hell is pacman doing other than regenerate the initramfs with my presets?
Harvey
Last edited by Harey (2011-11-12 16:10:48)

New kernel 3.1.1 did it again. My system hangs in initramfs after the reboot. Same as before: a simple rebuild without any changes fixed the boot process. This time I was able to backup the 'bad' initramfs before chrooting in and rebuilding.
it is very funny to see the content of the 'bad' initramfs image - it is nearly empty!
==> Image: /boot/initramfs-linux.img_64.bak
==> Kernel: unknown
==> Compressed with: gzip
-> Compression ratio: .452
-> Estimated decompression time: 0.036s
==> Included binaries:
/sbin/dmsetup
/sbin/cryptsetup
/sbin/udevadm
/sbin/blkid
/sbin/modprobe
/bin/busybox
==> Hook run order:
udev
keymap
encrypt
openswap
resume
The rebuilt image looks like this:
==> Image: /boot/initramfs-linux.img_64
==> Kernel: 3.1.1-1-ARCH
==> Compressed with: gzip
-> Compression ratio: .593
-> Estimated decompression time: 0.047s
==> Included modules:
aes_generic fcrypt hid-roccat-kone rmd160
aesni-intel ff-memless hid-roccat-koneplus rmd256
aes-x86_64 gcm hid-roccat-kovaplus rmd320
af_alg gf128mul hid-roccat-pyra salsa20_generic
ahci ghash-clmulni-intel hid-samsung salsa20-x86_64
algif_hash ghash-generic hid-sjoy scsi_mod
algif_skcipher hid hid-sony sd_mod
ansi_cprng hid-a4tech hid-speedlink seed
anubis hid-apple hid-sunplus seqiv
arc4 hid-axff hid-tmff serpent
async_memcpy hid-belkin hid-topseed sha1_generic
async_pq hid-cherry hid-twinhan sha256_generic
async_raid6_recov hid-chicony hid-uclogic sha512_generic
async_tx hid-cypress hid-wacom snd
async_xor hid-dr hid-waltop snd-rawmidi
ata_piix hid-elecom hid-wiimote snd-seq-device
authenc hid-emsff hid-zpff soundcore
authencesn hid-ezkey hid-zydacron sr_mod
blowfish hid-gaff hifn_795x syscopyarea
camellia hid-gyration hmac sysfillrect
cast5 hid-holtekff jbd2 sysimgblt
cast6 hid-kensington khazad tcrypt
cbc hid-keytouch lcd tea
ccm hid-kye libahci tgr192
cdrom hid-lcpower libata twofish_common
crc16 hid-logitech lrw twofish_generic
crc32c hid-magicmouse lzo twofish-x86_64
crc32c-intel hid-microsoft mbcache uhci-hcd
cryptd hid-monterey md4 usbcore
crypto_null hid-multitouch md5 usbhid
ctr hid-ntrig michael_mic usb-storage
cts hid-ortek padlock-aes vmac
deflate hid-petalynx padlock-sha wp512
des_generic hid-picolcd pata_acpi xcbc
dm-crypt hid-pl pata_jmicron xor
dm-mod hid-prodikeys pcbc xts
ecb hid-quanta pcrypt zlib
ehci-hcd hid-roccat raid6_pq zlib_deflate
ext4 hid-roccat-arvo raid6test
fb_sys_fops hid-roccat-common rmd128
==> Included binaries:
/bin/busybox
/sbin/udevadm
/sbin/dmsetup
/sbin/blkid
/sbin/cryptsetup
/sbin/modprobe
==> Hook run order:
udev
keymap
encrypt
openswap
resume
For some reason the initramfs built by pacman is missing all modules. To say it again, nothing changed, simple rebuilt by mkinitcpio -p linux!
This seems to be a bad bug...
Harvey
Last edited by Harey (2011-11-12 16:07:09)

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

After down loading the latest update the iPad wifi has difficulty connecting even though a good signal is present

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT6572 10.10.1 update killed my wifi!!

Similar Messages

Maybe you are looking for