HTC 8 always overheating to the point I get nervous to talk on it

Verizon says its because of a small crack in the upper right hand corner of the screen, but I really don't know. What sucks is I just got this phone in August 2014 and I'm having overheating issues, and it freezes. Verizon definitely gets you by the balls. There is nothing I can do unless it envoles paying no less then $100 and change WITH there insurance. They don't make you feel appreciated AT ALL. Off coarse they can't help in other ways like your bill or even sending a gift card. Anything would help ease the blow of "HEY YOU GOTTA SPEND MORE MONEY" to have a working device.....thats less than a year old! Can't wait for my 2 years to be up then IM DONE with verizon. I'd rather go back to pre-paid boost phone or tracphone. #verizonsucks

No.

Similar Messages

Ipod Touch overheating to the point of causing a fire

This morning I left my ipod touch 8gb 2nd Gen on charge hooked up to my imac through the official usb cable directly into the rear usb port on the imac. After 20 mins I noticed a burning smell and discovered my ipod touch was smoking away on my desk! It was very hot and had burnt a very expensive wooden desk. The usb cable is all brown and melted on the ipod end too. The mac is fine but it had a message that a device was taking too much power from the usb. It's not jailbroken or modified either.
Has this happened to anyone else?
I bought it from Argos 2 months ago. Do I take it back to them or the Apple store? And what are my chances of getting it replaced?
Would love an ipad but that would be pushing it lol.
Seriously though, if I had left it on any longer it would have caught fire.

Mac, iPhone, iPod and iPad customers within 90 days of ownership are eligible for complimentary phone support at 0844 209 0611. Call them ask see what they advise.

What's the point of updates - if..

Why do the upgrades tend to mess up my other applications? DVD Studio Pro - Bluetooth. I just feel what's the point of getting upgrades now. I did the Pro Application Support application which did take care of my DVD SP - however shouldn't upgrades be exactly that - UPGRADING - not have causes more problems. Taking time away from the work that needs to be done. Sorry - just had to rant a bit.

If you do a search on these forums it would probably boil down to doing these things.
Permissions Repair
Whenever a program that's installed places items into the /Library folder and Applications folder, it often has to amend permissions in order to do so which is why authenticating as an 'Admin' user is required so that it's able to carry out these amendments and place files where they should be and have their correct permissions assigned. Sometimes this change is not always corrected and may affect other programs operation. To help reduce side affects like normal User account being able to change and delete programs in the 'Applications' folder. Disk Utility located in /Applications/Utilities has a 'Permissions Repair' routine which ensures that the proper permissions are assigned based on their package rules.
Cron Scripts
These are scripts which the OS usually initiates itself, but performing them manually by using the Terminal can be beneficial.
Good programs worth looking into are, Onyx available at www.macupdate.com
Running it's maintenance scripts means you don't have to go into the Terminal manually and it does it's stuff very well, I've used it since 10.2 and never had a problem with it, it's updated regular, it's free and better than similar programs doing the same both free and those that charge.
Safe Boot
Starting up the computer after the chime and holding the 'Shift' key down, runs the fsck command, which verifies and fixes any problems with a startup volume, though not all, it also deletes the font cach and databases, so some issues with fonts can be helped by doing this, also if you seem to be getting conflicts in software, this can help to make sure the Apple components are working fine as it only loads the minimum 'kexts' and drivers so the computer operates, almost the equivalent in OS9 but not exactly.
There's lots more but doing these few things can help keep a system in shape, especially if no time was spent doing it beforehand. A note though, doing Permissions repair is not part of a 'Regular' maintenance routine, if you see message like 'Do not have permission' then it's worth doing it then.
Mark

What the point of scheduling an appointment

What is the point of getting a technician appointment for between 8am and 12pm, If the Technical wont get to me until 1pm?
True inconvenience on the customer!, After talking with a Supervisor, it truly shows the Verizon Fios DOES NOT CARE ABOUT IT’S CUSTOMERS!!!!!
It’s been my experience that Verizon Reps are untrained and consistently give out the wrong information. When you try to complain to the supervisor it's like the reading from the same script “ I will look into it and coached that associate(s) on how to properly do their job, and I will continue to monitor your order to make sure everything is completed”.
Then the supervisor could only tell me "MAYBE",
MAYBE a differenct technician MIGHT be in your area, and dispatch will get them to come
MAYBE the technician assisgned will get done early, and MIGHT be able to come early
To me all that is saying is MAYBE I should cancel my service and switch to someone esle!

At least you had a tech show up. I had 2 texts telling me the tech was coming and asking if I wanted to cancel.The tech texted me after waiting 3 hours 58 minutes that he was on his way, called me 10 minutes later to say he would be there in 10 minutes. 30 minutes later another text saying the tech was cancelled. Really? the tech didn't even have the common courtesy to come by and tell me verizon canceled him. The worst part is there is not one person at verizon that I could get in touch with that gave a **bleep** about the service I received or that I have the worlds slowest dsl for over 2 weeks. The funny thing is this is supposed to be verizon customer appreciation week. I guess they appreciate that we just put up with terrible customer service.

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
Apple is becoming more like Microsoft every day.

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is there some simple setting out there that will just "make it so?"@

The video I am watching this guy is just dragging every line to make curves. And every anchor point is a corner. He is not switching back and forth between the pen and the anchor points tool, and he is not using the convert points tool. He draws a curved line and starts another straight line only to curve it with a click and a drag. It is super efficient, and I could save a world of time if I could figure out what he is doing.

DVD always starts from the last point

No matter what change I make in the project, the DVD always starts at the last point I stoped! And I need it to start at the main Menu every time.
I've already read many of the topics with similar problem, and tried so many suggestions... none worked for me! Maybe I'm doing something wrong!
I'm using iDVD 7.0.4, Revolution theme.
The first top left auto-start box is empty. Then comes the Main Menu. From it comes 3 other boxes with chapters, all of them with Slide shows (built directly on iDVD) and a few 90 seconds movies (on iMovie, then Exported - not shared with iDVD)
I already tried to delete: com.apple.iDVD.plist and burn the DVD again. I've burned almost 10 already, with different settings!
Please, if anyone can help me, I would appreciate!
Message was edited by: Lu Damasio

All you need do within apple's dvd player app is to select menu and it will remember that spot next time the dvd is inserted into your mac. Or at least it should. If not, then there's something else going on.
A third party set top dvd player (in most cases) will also take you directly to the first menu of the dvd. Unless you simply hit "stop" in which case you should be prompted to resume playback at the last point played. Or again, you can select Menu from the remote to bring the dvd to the root menu page. Your choice.

I was trying to restore my iPhone 4(iOS 7.0.4) on my hp Laptop. But when i was restoring, it gets stuck in middle. then i tried again but same problem. always stuck at the same point. plz help me.

i was trying to restore my iPhone 4(iOS 7.0.4) on my hp laptop. but when i was restoring, it gets stuck in middle.then it keep showing recovery mode screen and i tried again to restore but same problem. Always stuck at the same point. plz help me.

Hi Varinder Ghuman,
Thanks for using Apple Support Communities. If you're unable to restore your iPhone, this article may help:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Ari

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume.

My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as told by an apple suppoprt advisor. still the same error after 16gb

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Why does the mouse 'run' to the lower right side of desktop and freeze when a SmartBoard is plugged into the USB port. Running 10.8.5. Sometimes the pointer has a cloud under it but it always freezes.

I run SmartBoards connected to iMacs running 10.7 and 10.8 throughout my school. On one of these computers the mouse has recently started freezing the minute a SmartBoard is plugged in to the USB port. The mouse 'runs' to the bottom right side of the screen, a cloud often is under the pointer, and it is not longer interactive. You can move the mouse upward a bit with the cloud following some of the time but it does not work. Once the SmartBoard is unplugged the mouse works normally. This particular computer worked fine with the SmartBoard until recenlty. Any solutions or ideas?

1. Reset the Pram and SMC
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ph14222
If these don't relate to your computer a quick web search will get you details
2. Run the Disk Utilty to verify the disk and then repair permissions.

When using Facebook with Firefox the pointer always has a little round circle by it rotating as if it is doing something. This happens when I play games on facebook and after I downloaded the new version of Firefox. How can I make this stop?

Using Facebook the pointer on the screen has a circle by it that is rotating when I play games. Acts like it is doing something, I would like to know if there is a fix for this?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My iphone 4 is stuck on the hello screen...with a white background after i tried to update it. How do i correct this? I have already gone to itunes and backed it up. But after i back it up it always return to the hello screen in different languages ?

My iphone 4 is stuck in the setup phase with a white background. It tells me hello in several diffrent languages and tells me to slide to set up. I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground. Can anyone please help me with this? All of this happened after i updated it for the 1st time. Help pLease?
Edward

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

What is the point of the download window if you use stacks?

Greetings,
One of the most annoying things about the download window was the fact that the window always hung around after completing dowloads in Tiger when using safari. To me, that was just a time waster of always pressing Apple+W to close that window.
When Leopard was released, I was excited to realize that one function of the download stack was to recevie downloads from safari after completed. However, after completion, the download window still sticks around and I still have to close it... then navigate to my stack of downloads to mount the image. What is the point of the download window is I use stacks now? Why can't the window disappear after completion?
//Cheers

Aaargh!! Me too - it's so annoying! Firefox has a downloads window as well - I just don't see the point of it. I didn't like it in Tiger either.
As a way to see the progress of downloads, it's fine, but it should at least close when all the downloads are finished, and completed downloads should not display.
Ideally it should look & work exactly like the Copy window in Finder - the one that comes up when you are copying or moving a large file or number of files from one folder to another.
Is there a hack that will make it work like that?

What is the point of Precision and Scale in Number Type?

Version :11.2
What is the point in having PRECISION and SCALE in number type? If you create the column with just NUMBER ie.without
specifying precision or scale , you can enter numbers with any precision and scale.
SQL> select * From v$version where rownum < 2;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
SQL> create table t1 (col1 number);
Table created.
SQL> insert into t1 values (223.9939394);
1 row created.
SQL> insert into t1 values (88.228384);
1 row created.
SQL> insert into t1 values (9.34);
1 row created.
SQL> insert into t1 values (000.00);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from t1;
 COL1
223.993939
88.228384
 9.34
 0Did you ever have a business scenario where a Numerical column should store values only with a fixed precision and scale ?

Omega3 wrote:
Version :11.2
What is the point in having PRECISION and SCALE in number type? If you create the column with just NUMBER ie.without
specifying precision or scale , you can enter numbers with any precision and scale.
SQL> select * From v$version where rownum < 2;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
SQL> create table t1 (col1 number);
Table created.
SQL> insert into t1 values (223.9939394);
1 row created.
SQL> insert into t1 values (88.228384);
1 row created.
SQL> insert into t1 values (9.34);
1 row created.
SQL> insert into t1 values (000.00);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from t1;
COL1
223.993939
88.228384
9.34
0Did you ever have a business scenario where a Numerical column should store values only with a fixed precision and scale ?Lots of business requirements for specific precisions and scales.
A persons Age may required to be stored as whole numbers of no more than 3 digits.
A sum of money may required to be stored with no more than 2 decimal places of accuracy e.g. GB Pounds and Pence or US Dollars and Cents
A unit of length may required to be stored in metres with 2 decimal places for centimetres
A shoe size may be required to be stored with one decimal place for half sizes
etc.
etc.
Yes, you may just create all of them as generic NUMBER datatype, but creating them with precision and scale can provide additional information about the limitations expected for the values stored, especially for things like reporting tools that may use the specified precision and scale to determine how to display the values automatically (by default).
If you start questioning "what's the point?" then you may as well say what's the point in having a NUMBER datatype when we can store numbers in a VARCHAR2 datatype? or what's the point in having a DATE datatype when we can stored dates as VARCHAR2 datatype? etc.
No point in asking such a question because there's almost always a point to these things (and if there isn't they get deprecated in later versions).

Plugin-Check page... Mozilla is missing the point.

Mozilla,
I have used Firefox FAITHFULLY for the past 10 years. I chose Firefox over IE specifically because it has ALWAYS been customizable. While IE (and microsoft) has always been rigid, and forced the user to do things their way, Firefox has been the opposite:
Want a page to look a certain way, there's a plugin for that.
Want more security while you browse, there's a setting for that.
Want to risk it all and have no security, there's a setting for that too!
I have dabbled with other browsers too. Google's Chrome browser has a few things that I like... including the option to save a link to a page as an "app" (creating a fullscreen window for just that page). BUT I chose to completely uninstall chrome when I found out that you cannot disable their certificate security checks.
You see... My bank, the electric company, and several other legitimate sites fail their ssl certificate authentication AND there is NO WAY TO DISABLE this feature. For some reason, the folks at Google think they know what is best for me, and will not give me the option to browse "unsafely" if I so desire.
Now... To the point of this "question"
It seems that recently, the folks at Mozilla have decided to force a "plugin-check" page on all of us. At first, I played nice. I updated my java and flash plugins as it suggested, and it still pops up. I then googled "FOR HOURS" on how to disable the feature. I went to about:config and changed all the Boolean variables I could find, and still the page pops up.
Then I noticed something in doing further research. It seems that in doing hours of research (WHICH I SHOULDN'T HAVE TO DO) I have seen posts from lots of others that have also done hours of research, and they are getting the same answers from mozilla:
"You need to do this"
"You need to change this setting"
"Please tell us what plugin is causing the problem"
if they knew that they wouldn't be asking in the first place
"If you don't help us, we can't help you"
etc...
The one thing mozilla hasn't said is "Woops... sorry, we forgot to give you the OPTION to do what YOU WANT"
I am very happy that there is an OPTION to make my browsing safer. Were I a casual user that just went to facebook, netflix and the like I would probably be very satisfied. Here's the thing, a great deal of casual users just go with what they have... like IE. People that know more about computing, and henceforth like to change things and do what they like probably use firefox... and firefox is cutting them off. I don't use Acrobat, I use foxit (unrecognized plugin). I use several extensions that HELP ME the way I WANT TO BE HELPED. They work just fine for what I NEED, and I don't want to change them.
I have trouble seeing items on the screen so I use the nosquint plugin... I don't know if it's recognized or not... and I don't care, it works better FOR ME than any of the others that I have tried. Yet, just like Google, and Microsoft before it, Mozilla is attempting to "make me safe" by controlling me. This is unacceptable, I CHOOSE to use firefox because I WANT THE CHOICE to browse MY WAY.
People have come here, and on other sites asking "HOW DO I DISABLE this screen" and, as shown above, the answer is to try and "trick" firefox into submission. The "trick" doesn't work, and both the person that needs help, and the person trying to help (i know... not a mozilla employee) gets frustrated.
The point is, we shouldn't have to "trick" or force firefox to submit to our will by hours of trial and error. We didn't ask for the page to show up in the first place. I'm quite sure there are SOME that are happy it is there, but mozilla needs to realize that there are SOME that are not, and GIVE THEM THE CHOICE do disable an unwanted "option".
In short... Please find a way for us to disable, IN ITS ENTIRETY the outdated plugin check web page that pops up EVERY TIME I start firefox. I know some of my plugins are out of date, and I know some are not recognized. I like it that way. If I wanted to have ZERO control over what MY pc does, I would switch to windows 8 (which doesn't have a metro app for firefox yet)

hello zthaynes, please [[Update Firefox to the latest version]], this should already solve the issue.

HTC 8 always overheating to the point I get nervous to talk on it

Similar Messages

Maybe you are looking for