HTC 8x win 8.1 update fails

I have tried twice to update my HTC 8x to windows 8.1. On both occassions the download was successful and the phone went through one restart, then the graphic of the two gears ran for a couple of minutes, then a message was displayed saying that the update was unsuccessful try again later. My current versions are:OS version: 8.0.10532.166Firmware revision number: 3030.0.41601.841Hardware revision number: 0002 Does anyone have any ideas? Thanks in advance.

Hey, even I am experiencing a similar difficulty. My phone is locked to Telstra carrier and has the firmware version accordingly. I receive an update available notification but it is for a HTC update over Developer's Preview (& not a windows phone update).
I guess it is for the next firmware version but the problem occuring is the same. Download completes and prepares for installation succesfully but it completes abruptly and resets mid way during installation cog screen, displaying an error (0x8007000d) which I think is related to firmware/hardware of the phone and not the update (according to Microsoft Support service person)
I had a talk with microsoft support regarding the same and they suggested using the 'Windows Phone Recovery Tool'When I did so, it detected my phone as C625b but it showed Firmware : Unknown, whereas my firmware version is clearly displayed in the About section under Settings.Firmware revision number: 3030.0.41601.841Hardware revision number: 0002This is the same as you guys, so I would suggest you to try the tool mentioned above, and check if you get the same results (that is firmware version unknown) so that we might get to know more about whether it's the problem with the firmware version or anything as such because of which the update is not successfully installed. Because, quite a bunch of HTC 8Xs in other countries and over other carriers have this new firmware update where the HTC Hub also works properly (It had issues with the clock updating etc.) along with windows phone 8.1 update.

Similar Messages

I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

The title says it all ...
I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

If you are using Help 》updates, it is outdated. You can however go to Product Updates on the Adobe.com website and download your updates there. I am not at my desk b<t when I get back, I'll get the links unless someone else can do that sooner.

I have new win 8 pc. PS 64 bit does not install properly. get error that update failed

I'm installing PS CC on a new win 8 pc. I think it installs, because i can open it. But on the CC site, when i press the update button, the update fails. says to retry. fails. i have all updated drivers and updates to windows 64 bit win 8.

I'm going to answer my own question in hopes it helps someone else. I had the problem immediately after I had installed PS CC. Once I restarted the computer and tried again, it worked.

WIN 7.0.1 Update Fails on XP Pro

The Photoshop 7.0.1 update fails when I try to run it on Windows XP Pro. I have reproduced this error two times, once on a fresh installation of Photoshop 7. I receive a ComponentMoveData Error: Media Name: data Component: FileGroup: File: ...\temp\wzseo.tmp\data1.hdr Error Number: -113. This failure causes Photoshop to crash on startup.

I've downloaded the update and i have gotten the error message, that it can not find the adobe photoshop directory. I've tried various ways of getting around the path check.
NOTE: I do not get errors that are reported on these forums about archive extraction.
1. Reinstalling photoshop
2. Uninstall and Reinstall photoshop
3. Cut/Paste installer into photoshop directory and install
4. I've renamed c:\program files\adobe\photoshop 7.0\ to c:\program files\adobe\adobe photshop 7.0\ and c:\program files\adobe photoshop 7.0\
5. Read Forums for support
I'm attempting an installation again. I'm going to be reinstalling soon. So i'll have another chance to test it out, if not, its sad. I was intrested in a kais power tools 3.0 fix for photoshop 7.0, please help. Thanks in advance.

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

MS homeserver 2011 connector error in Win 8.1 Update 1

Had dificulty in installing win 8.1 Update 1, which required the OS rebuild. The Win Homerserver 2011 connect program fails to install. Error message includes “…either another software installation is in progress, or, the computer has a restart pending.” I have been checking all possible Microsoft solutions without finding any that worked.
I have just searched the registry for RebootRequired and found the following location: \HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Lenovo Settings Installer Manager, which has a RebootRequired listed. The system has been rebooted a large number of times.
RebootRequired        REG_DWORD        0x00000000 (0)
There is a sub-key \Common that has the following
SystemRebooted        REG_DWORD        0x00000000 (1)
This T440s is the only Lenovo system (out of 4) that has these keys. Is this the source of my problem and can I safely remove them from the registry? Thanks

Had dificulty in installing win 8.1 Update 1, which required the OS rebuild. The Win Homerserver 2011 connect program fails to install. Error message includes “…either another software installation is in progress, or, the computer has a restart pending.” I have been checking all possible Microsoft solutions without finding any that worked.
I have just searched the registry for RebootRequired and found the following location: \HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Lenovo Settings Installer Manager, which has a RebootRequired listed. The system has been rebooted a large number of times.
RebootRequired        REG_DWORD        0x00000000 (0)
There is a sub-key \Common that has the following
SystemRebooted        REG_DWORD        0x00000000 (1)
This T440s is the only Lenovo system (out of 4) that has these keys. Is this the source of my problem and can I safely remove them from the registry? Thanks

Photoshop cs4 11.0.2 update fails windows 7 64 bit

Hello..
I finally got upgraded to windows 7 64 bit and and installed the cs4 download I got awhile back and it installed cs4 11.0 no problems. I got every update to install but the 11.0.2 update fails and I get this message
"Adobe Setup has stopped working"
I have tried every thing I read, run as admin, move stuff out of appdat folder, reinstall.... reboot 39 times , I have no windowd defender or AV running at all everything I can find on here does not work and I get this error..... I read everyone gets this error except a darn few lucky souls..... so I tried compatibilty modes, it does the same error from win 98 all the way to win 7, xp same error vista same error it don't matter what version of windows this update seems to just stop working, so I did a troubleshooter on it and it determined that this program is incompatible with windows... I tried downloading it from Adobe and tried that... same error everytime.... don't matter if its through adobe updater or direct download this update fails and I decided to try 11.0.1 and it does the same so I guess PS CS4 11.0 is really not updatable to 11.0.2. and adobe suggests you to go cs5 to solve this problem. Except their updates fail to it looks like on this forum....
This is the problem details I get if it helps, because it does not leave a log for some reason.
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     Setup.exe_Adobe Update Installer
Application Version:     2.1.60.0
Application Timestamp:     4a696125
Fault Module Name:     Setup.exe
Fault Module Version:     2.1.60.0
Fault Module Timestamp:     4a696125
Exception Code:     c0000005
Exception Offset:     000448e5
OS Version:     6.1.7601.2.1.0.768.3
Locale ID:     1033
Additional Information 1:     0a9e
Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
Additional Information 3:     0a9e
Additional Information 4:     0a9e372d3b4ad19135b953a78882e789

I have tried run as admin, same error pops up, I tried giving myself ownership and special permissions and everything to the PS folder since the exe is read only thinking thats why it wont update... I ran the clean script and reinstalled and tried every trick known to man ( well this forum and several others found on google) and nothing seems to work, the 11.0.2 update itself crashes, so I am just going to assume its windows fault because it does seem to work for other people....but it does seem to crash on mac I have read too... I have UAC disabled and no AV installed trying this so I installed my trend micro AV and checked and the puter is virus free so am not sure why I can not use the update but here is the screen shots I get....
I run setup.exe as admin I get this
then when I click on next, with 2 seconds I get this popping up, count 1,2 bam their it is..
so no matter what I do I get this error on 11.0.1 or 11.0.2 updates in every mode or permissions you can give...

Pixel Bender Update fails

The Adobe Application Manager ran about a week ago and updated my CS5 Master Ed to 12.0.3 however Pixel Bender Toolkit 2.5 update failed to install in AE and Fl Pro. Every time the manager runs with an update it won't install PB 2.5. I have turned of my AV and tried, no luck. If I go into AE, PB works no problem. It just won't take the update. I have PB in my Adobe collection but it's version 2.1. Any ideas what the problem might be? Will I have to do a complete reinstall? That is a last option if possible. I have tried to download PB 2.5 from the PB site but it won't install either. Here is the error:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s), 4 warning(s)
WARNING: Payload:{2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding has been updated and has been selected for repair. The patch {55516693-25E2-4620-BF94-6BA66B00419F} Adobe Player for Embedding_3.1_AdobeAPE3-mul will be uninstalled now.
WARNING: Payload:{2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding has been updated and has been selected for repair. The patch {55516693-25E2-4620-BF94-6BA66B00419F} Adobe Player for Embedding_3.1_AdobeAPE3-mul will be uninstalled now.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: MsiConfigureProductEx failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
ERROR: The following payload errors were found during install:
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Pixel Bender Toolkit_2.5_aifsdk-win: Install failed
ERROR: - Pixel Bender Toolkit: Install failed
Windows 7 - x64
8Gb ram
CS5 Master Collection

The installer seems to be failing while installing Microsoft_VC90_CRT_x86.msi. As per your error log the msi error is 1612, so the following steps may help you in installing the update successfully -
You will find Microsoft_VC90_CRT_x86.msi in your PB 2.5 update payloads folder. Double click to install the msi manually. When it prompts for the path point to itself (i.e. Microsoft_VC90_CRT_x86.msi). If installation of Microsoft_VC90_CRT_x86.msi is successful, run the PB 2.5 update.

Enter Machine Password DNS Update Failed on Mac Pro 10.6.6

Windows 2008 R2 Active Directory with several PCs and 3 MACs, all three at 10.6.6.
Only one, the Mac Pro, is slow to access network resources, gets Enter Machine Password: DNS Update Failed on Console, and is much slower to open webpages than the other 2 MACs; they work fine. I know that AD is configured right since I have no network errors on them.
Can bind and unbind as expected, can access Mac from AD Server as well as other PC/Macs, so this issue is not like most all other posts in that everything works except slow network (opening a network share gets the spinning wait cursor).
Any Ideas?
TIA

On the offending Mac open System Preferences->Network pane and highlight the port that you are connecting to the domain. Then in the right side of the pane click on the word "Advanced". In that drop-down select the DNS tab and make sure it has the same DNS that the domain uses. You can use thew + button to add the correct DNS servers. Also while in the Network pane, Advanced, select the WINS tab and fill it the appropriate settings for the Windows Domain.
Also on the offending Mac open System Preferences->Date & Time and make sure the Map Location is correct and also you are using the same Time server that the Domain uses (you can type in the Time Server address in the Time Server field.
Lastly are you using DHCP or Static in your Domain?

Adobe Acrobat 8 Pro Update Failed

I have upgraded to Windows 7 & also to Office 2007. I need to update my Adobe Acrobat Pro 8 to 8.1 to make it work, but the update fails. Can you send me a link to update it manually.
Thanks,
Ilyas

ftp://ftp.adobe.com/pub/adobe/acrobat/win/
Install in order, rebooting after the last update.

Update failed 11.1.4 and further attempts to reinstall have also failed

I have tried numerous ways to install 11.1.4 after the update failed. I have turned off my virus scanner and tried to reinstall. I get this error Itunes helper did not install error 7 I am installing iTunes on a Lenovo ideapad Z570 with Win 8.1.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

CS6 update fail: Error Code: U43M1U49

CS6 Master Collection (on Win 8.1) updates keep failing to download/install after 2 days repeated attempts. The error code is always: Error Code: U43M1U49.
Does anyone know why this could be happening or have a fix?
Thanks,
Gary Bird

Hello gazbaz1,
It would help us if you could share the following file located here:
\Program Files(x86)\Common Files\Adobe\Installers\
Sarika

Updates Fail to install

The following updates fail to install:
CS5 4.0.5 updates
Extension Manager CS5 5.0 update
Photoshop 12.0.4 update for CS5
Photoshop Camera RAW 6.7 update
I recently bought a Nikon D7000 and my CS5 with Camera RAW 6.0.8.205 won't read it!

Please provide us with the following logs:
You can find them at:
Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]<mailto:[email protected]

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

I am getting an Update failed error and I have tried clicking Retry to no avail... it tells me to contact customer support. What can I do to correct this and get the update?

The message I got is "UPDATE FAILED - download error. Press Retry to try again or contact customer support" I have pressed the retry button a few times but the update on continues to fail and I get the same message. What will repair this issue?

update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

HTC 8x win 8.1 update fails

Similar Messages

Maybe you are looking for