HTC diamond internal storage path address
hello all...I have two questions
1) Does any body know the path address for the HTC diamond internal storage, so I can save my captured images?
2) how can I force my Application to use the front camera?
Hava a look at this MIDlet.
http://www.forum.nokia.com/info/sw.nokia.com/id/37086440-dcce-4fb4-aa3e-8d8c16d62b33/MIDP_System_Properties_v1_2_en.zip.html
JME doesn't support a second camera. HTC may have some proprietary APIs for this, but otherwise, you're out of luck.
Similar Messages
-
HTC Rhyme has 4GB eMMC Internal Storage - Where?
Moved for greater exposure
The 768mb is ram memory and the 4gigs is internal storage memory but it isn't doesn't appear to be accessable except to install Apps and app data.
The 8gig sd card is the only area with read - write access and i think you can only save data to the external sd card.
Page 42 of the owners manual explains the store drive access for the device.. Download from the support page for the phone.. http://support.verizonwireless.com/clc/devices/index.html?p=5758&m= -
Memory Dump :FBL5N No roll storage space of length 1753104 available for internal storage.
Dear Friends,
I am getting below error during T-Code FBL3N Report. No roll storage space of length 1753104 available for internal storage.
Our Server' RAM size is 24 GB,and existing parameters are as below
ztta/roll_area: 6500000
ztta/roll_extension:2000683008
abap/heap_area_total:2000683008
abap/heap_area_dia: 5000000000
abap/heap_area_nondia: 2000683008
em/initial_size_MB: 4092
Please suggest Parameter to be change.
Details Dump log ST22
Runtime Errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Date and Time 04.03.2014 10:18:48
|Short Text |
| No roll storage space of length 1753104 available for internal storage. |
|What happened? |
| Each transaction requires some main memory space to process |
| application data. If the operating system cannot provide any more |
| space, the transaction is terminated. |
|What can you do? |
| |
| Try to find out (e.g. by targetted data selection) whether the |
| transaction will run with less main memory. |
| |
| If there is a temporary bottleneck, execute the transaction again. |
| - |
| |
| If the error persists, ask your system administrator to check the |
| following profile parameters: |
| |
| o ztta/roll_area (1.000.000 - 15.000.000) |
| Classic roll area per user and internal mode |
| usual amount of roll area per user and internal mode |
| o ztta/roll_extension (10.000.000 - 500.000.000) |
| Amount of memory per user in extended memory (EM) |
| o abap/heap_area_total (100.000.000 - 1.500.000.000) |
| Amount of memory (malloc) for all users of an application |
| server. If several background processes are running on |
| one server, temporary bottlenecks may occur. |
| Of course, the amount of memory (in bytes) must also be |
| available on the machine (main memory or file system swap). |
| Caution: |
| The operating system must be set up so that there is also |
| enough memory for each process. Usually, the maximum address |
| space is too small. |
| Ask your hardware manufacturer or your competence center |
| about this. |
| In this case, consult your hardware vendor |
| abap/heap_area_dia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each dialog process. |
| Parameters for background processes: |
| abap/heap_area_nondia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each background process. |
| Other memory-relevant parameters are: |
| em/initial_size_MB: (35-1200) |
| Extended memory area from which all users of an |
| application server can satisfy their memory requirement. |
| Note which actions and input led to the error. |
| |
| For further help in handling the problem, contact your SAP administrator |
| . |
| |
| You can use the ABAP dump analysis transaction ST22 to view and manage |
| termination messages, in particular for long term reference. |
| |
|Error analysis |
| The internal table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_DATA~C |
| HANGE_ITEMS\DATA=GT_BSIK" could not be enlarged further. |
| |
| Memory location: "Session memory" |
| |
| You attempted to extend the data structure for the management of the |
| memory blocks for table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_D |
| ATA~CHANGE_ITEMS\DATA=GT_BSIK". However, the 1753104 bytes required for |
| this were no longer available in the specified memory area. |
| |
| The amount of memory requested is no longer available. |
|How to correct the error |
| |
| Try to decide by analysis whether this request is |
| reasonable or whether there is a program error. You should pay |
| particular attention to the internal table entries listed below. |
| |
| |
| |
| |
| |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY" " " |
| "ZCL_IM__GTA_TAX_CODE==========CP" or "ZCL_IM__GTA_TAX_CODE==========CM001" |
| "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
|System environment |
| SAP-Release 700 |
| |
| Application server... "NEWPRD1" |
| Network address...... "10.0.0.1" |
| Operating system..... "Windows NT" |
| Release.............. "6.0" |
| Hardware type........ "16x AMD64 Level" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 19 |
| Shortdump setting.... "full" |
| |
| Database server... "NEWPRD1" |
| Database type..... "ORACLE" |
| Database name..... "PRD" |
| Database user ID.. "SAPSR3" |
| |
| Terminal................. " " |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 700 |
| created (date)... "Sep 17 2012 22:56:00" |
| create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 353 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 700 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0, Windows NT 6.1, Windows NT 6.2" |
| |
| Memory consumption |
| Roll.... 16192 |
| EM...... 1826770240 |
| Heap.... 0 |
| Page.... 40960 |
| MM Used. 1815573536 |
| MM Free. 2717408 |
|User and Transaction |
| |
| Client.............. 500 |
| User................ 1651 |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "ED4EA3E3AB0AF11DA318E61F131BC713" |
| |
| Program............. "ZCL_IM__GTA_TAX_CODE==========CP" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" - |
| in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS". |
| The main program was "RFITEMGL ". |
| |
| In the source code you have the termination point in line 64 |
| of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001". |
| The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job. |
| Job Name....... "RFITEMGL" |
| Job Initiator.. "BASIS" |
| Job Number..... 09115400 |
|Source Code Extract |
|Line |SourceCde |
| 34| MANDT TYPE BSEG-MANDT, |
| 35| BUKRS TYPE BSEG-BUKRS, |
| 36| BELNR TYPE BSEG-BELNR, |
| 37| GJAHR TYPE BSEG-GJAHR, |
| 38| BUZEI TYPE BSEG-BUZEI, |
| 39| QSSKZ TYPE BSEG-QSSKZ, |
| 40| KTOSL TYPE BSEG-KTOSL, |
| 41| HKONT TYPE BSEG-HKONT, |
| 42| END OF TY_BSEG, |
| 43| |
| 44| BEGIN OF TY_FINAL, |
| 45| BUKRS TYPE BSEG-BUKRS, |
| 46| BELNR TYPE BSEG-BELNR, |
| 47| GJAHR TYPE BSEG-GJAHR, |
| 48| END OF TY_FINAL. |
| 49| |
| 50| DATA: CW_ITEMS TYPE RFPOSXEXT, |
| 51| GT_BSIK TYPE STANDARD TABLE OF TY_BSIK, |
| 52| GW_BSIK TYPE TY_BSIK, |
| 53| GT_BSAK TYPE STANDARD TABLE OF TY_BSAK, |
| 54| GW_BSAK TYPE TY_BSAK, |
| 55| GT_BSEG TYPE STANDARD TABLE OF TY_BSEG, |
| 56| GW_BSEG TYPE TY_BSEG, &nbsap basis wrote:
|Information on where terminated |
| Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" - |
| in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS". |
| The main program was "RFITEMGL ". |
| |
| In the source code you have the termination point in line 64 |
| of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001". |
| The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job. |
| Job Name....... "RFITEMGL" |
| Job Initiator.. "BASIS" |
| Job Number..... 09115400 |
First of all try to optimize code. -
How can I create a folder on internal storage of DMP 4310?
Hi. I'm a junior engineer in Korea.
I have a question about DMP 4310 with creating a folder of internal storage.
I can acess the internal storage but, I cannot make a folder or file uploading.
I already checked about Access mode - read and write, and also DMP management - FTP Server On, and password too.
It's enable to read but, unable to make a file or a folder.
when It rejected my order, I saw a message on my screen like this.
"550 Create directory operation failed."
I searched this letters, but couldn't get any information to handle this issue except for showing of permision error message of linux.
now, I am begging for your kindness.
what am I suppose to do?I checked my permission, and I got the result.
By the result, I cannot make any folders or files except for path of /usb_1/
So, I can upload file to /usb_1/ and play it. that's it.
self question, and self answer... so sad to less people to answer this DMS section... -
Palm crashes when using any program through internal storage
So my palm TX will not operate when i access any software through the internal storage including going into wifi it just restarts the unit. Only software on my card works. HELP
Post relates to: Palm TXHi, and welcome to the Palm Community Forums.
It sounds like perhaps a system or preference file has become corrupted, or you have some incompatible third-party software.
You will probably have to perform a Hard Reset to wipe everything clean and restore your TX to its factory settings. First, do a Hotsync to back everything up to your desktop. Then rename the Backup folder on your desktop to Backupold. It will prevent all of your system and preference backup files, and third-party apps, from automatically restoring at the next Hotsync. Then, perform a Hotsync which will restore your regular Palm data (contacts, calendar, etc.) without anything else. Lastly, restore your third-party applications one at a time, testing after each installation before going on to the next one.
Your Backup folder is located on this path (with Win XP installation):
c > program files > palm (or palmone) > [your device folder, usually an abbreviation of your Palm's name, or perhaps a combination of your initials, etc.] > backup
Good luck, let us know how it turns out.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
My husband's phone is Torch9810, after connecting it to their computer in the office, the whole internal storage is gone or maybe corrupted. He cannot used it anymore except in calling and texting only. What should we do?
Hello,
Please describe, with a bit more detail, exactly what happened and exactly what the situation now is. From those words, I can deduce several different possible things...each with different remedy paths. But, many of those remedy paths would be unnecessarily destructive if they are not the correct path. So properly understanding your situation is quite critical to choosing the correct remedy path.
For example...you say "internal storage has gone"...what, exactly, does that mean please? Detailed description, please.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
To all DB2 Gurus,
database: DB2 v9.5 LUW FP4
I have attempted to do some reorg/relocate (to overcome the 2TB limit of Windows file-system) my database files and ended up with the situation below:
>db2pd -d BIP -storagepaths
Database Storage Paths:
Number of Storage Paths 8
Address PathID PathState PathName
0x000007FFFC83BC80 0 InUse E:\db2\BIP\sapdata1
0x000007FFFC83B8C0 1 InUse E:\db2\BIP\sapdata2
0x000007FFFC83B380 2 InUse E:\db2\BIP\sapdata3
0x000007FFFC83AFC0 3 InUse H:\db2\BIP\sapdata4
0x000007FFFC83AC00 4 InUse F:\db2\BIP\sapdata1
0x000007FFFC83A840 5 InUse F:\db2\BIP\sapdata2
0x000007FFFC83A300 6 InUse F:\db2\BIP\sapdata3
0x000007FFFC839DC0 7 InUse H:\db2\BIP\sapdata4
If you notice PathID 3 and 7 (noted with * above) points to the same path - H:\db2\BIP\sapdata4. My main objective is to have an
AUTO STORAGE PATHS as follows:
E:\db2\BIP\sapdata1
F:\db2\BIP\sapdata2
G:\db2\BIP\sapdata3
H:\db2\BIP\sapdata4
I will be able to use relocatedb tool to move containers around. And will end up with the intended storage paths (shown above). But the main concern I have is that DB2 will have 2 entries of each storage path pointing to the same path (see below).
>db2pd -d BIP -storagepaths
Database Storage Paths:
Number of Storage Paths 8
Address PathID PathState PathName
0x000007FFFC83BC80 0 InUse E:\db2\BIP\sapdata1
0x000007FFFC83B8C0 1 InUse F:\db2\BIP\sapdata2
0x000007FFFC83B380 2 InUse G:\db2\BIP\sapdata3
0x000007FFFC83AFC0 3 InUse H:\db2\BIP\sapdata4
0x000007FFFC83AC00 4 InUse E:\db2\BIP\sapdata1
0x000007FFFC83A840 5 InUse F:\db2\BIP\sapdata2
0x000007FFFC83A300 6 InUse G:\db2\BIP\sapdata3
0x000007FFFC839DC0 7 InUse H:\db2\BIP\sapdata4
Questions:
- is it ok to leave them as is?
- if I leave it as is would it have any effect on the database when it eventually auto extend a tablespace?
- do I need to remove the dupplicate? if yes, how?
- if I drop/delete storage duplicate storage path will it delete both entries?
Please advise. Thank in advance for your help.
Happy Holidays!!!
FrancisStephen,
Thank you for the prompt reply. This what happens when I created a new empty tablespace:
E:\db2\BIP\sapdata1\DB2BIP\NODE0000\BIP\T0000040\C0000000.LRG
F:\db2\BIP\sapdata2\DB2BIP\NODE0000\BIP\T0000040\C0000001.LRG
G:\db2\BIP\sapdata3\DB2BIP\NODE0000\BIP\T0000040\C0000002.LRG
E:\db2\BIP\sapdata1\DB2BIP\NODE0000\BIP\T0000040\C0000003.LRG
F:\db2\BIP\sapdata2\DB2BIP\NODE0000\BIP\T0000040\C0000004.LRG
G:\db2\BIP\sapdata3\DB2BIP\NODE0000\BIP\T0000040\C0000005.LRG
H:\db2\BIP\sapdata4\DB2BIP\NODE0000\BIP\T0000040\C0000006.LRG
H:\db2\BIP\sapdata4\DB2BIP\NODE0000\BIP\T0000040\C0000007.LRG
It created 2 containers on the same storage path since it has two entries.
In v9.7 when i execute " alter database drop storage on <path1>" will it delete only one entry
in the storage path lists? I have not done this so do not know the outcome.
Thanks again.
Francis -
We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Can't figure out how to Transfer pics from internal storage to my SD!!!!!
I can't figure out how to transfer my pics from my internal storage on my 16GB Droid Razr to my SD card!!! It is getting EXTREMELY frustrating , can anybody help me????
@ebz383
I appreciate you bringing this to the attention of the forum. It sounds like it has been quite the experiencing transferring the pictures to your SD card. No worries the forum is here for you.
To transfer all pictures from the internal storage of the phone to the SD card follow the instructions below.
1) Settings
2)Storage
3)Manage Internal Storage
4) Select Pictures
5) Move
Let me know if you have any additional questions or concerns. We'd love to help out.
YosefT_VZW
VZW Support
Follow us on Twitter @VZWSupport -
Can I add internal storage to a mac mini?
I am out of space and have plenty of external storage, I just think that it works better with internal storage.
You can add a larger hard drive to your mini. Assuming it's an Intel-based mini, you can add a serial ATA hard drive up to 1GB, maybe more. I like, and use, Western Digital Scorpio Black drives, which come with a 5 year warranty (versus 1-3 years for others). You can see some serial ATA choices here.
-
How to retrieve photos from an iphone internal storage?
Hi
I have recently lost a lot of my photos from my iphone! I hooked it up to the laptop and noticed there is 342 photos in my internal storage. How do I get them from my internal storage onto a disk or even saved into my laptop? they are not appearing on my phone only when its plugged into the computer but no way of saving them! please help!Hi,
Please help
I plugged in my Iphone 5s using cable to my HP window xp laptop and "CUT" all images from internal storage to my USB.
All images went corrupted and showed size of 1kb
How can I recover those images?
Thank you in advance -
1/ plug in my iphone 4S (iOS 6.1.3) unlocked to PC (window 7)
2/ window explorer open and see "Apple iPhone" icon and clicked
3/ see internal storage icon telling me GBs of ize used
4/ click in and see DCIM folder
5/ double click and nothing inside
can anyone help please?Are there pictures in your camera roll? Windows does not handle viewing the iPhone in Explorer very well. It will give you an idea of how much space is being utilized in the phone, but it is not really that accurate. You do not have access to anything else via Explorer except photos that are in the Camera Roll. No other files can be accessed and you cannot add files to the phone via Explorer.
-
I saved photos from my Macbook Pro onto my Iphone (using itunes, 4 years ago). My macbook is now dead and I need to get the photos I saved off of my iphone 3GS transferred to a pc. Any help... From my PC I can only access "internal storage"
The iphone is not a storage/backup device. The picture sycn is one way - computer to iphone. The photos are also reduced in size when synced to iphone so they are not of the original quality
It has always been very basic to always maintain a backup of your computer.
Have you failed to do this?
If so, not good at all, you can e-mail the pics to yourself - keep in mind they will never be of the original quality -
Hello, I am out of internal storage on my Iphone 4 ALREADY (Just purchased 3 months ago!). I need to clear up some space so I can do updates and take new photos. I was thinking about backing up my Photo Stream to the icloud and then deleting my Camera Roll.
1.) Is this a terrible idea??? I do NOT want to lose those photos! But I NEED more space on my phone!
2.) Will deleting Camera Roll free up space (a sufficient amount? My Camera Roll is at 4.5 GB)?
3.) Will deleting Camera Roll delete my photos from Photo Stream also? It doesn't seem to.
4.) Does Photo Stream ever automatically delete photos???
5.) Is there anyway I can save the pictures from my phone to my computer??? I can see the photos on my computer when viewing them through Photo Stream, but those are not permanent, correct?
This is one of the most ridiculous, confusing and unnessacary things I've ever known! Why oh why can't we just have a good ol' SD Card??? (My Droid never ever ran out of storage and I had it for 2 years...)
I tried backing up my photos in Itunes, but I don't have a new enough version. I tried downloading a new itunes and it still tells me I don't have the new version.
I have been working on this for 4 hours, its 2:30 am and I am going to bed. I am sorry I had to ask, but I've been searching and searching and just cannot find the answers. Thank you so much for your help!
6.) Also, I haven't been able to find the videos using the Icloud or the Photo Stream either...
7.) Do you have to have your device (pc) synced with icloud to access the info you backed up from iphone?? Like can I show my cousin my photos at her house using her computer by just loggin on??? Or can I only view my contacts, calender, mail, notifications, and such?
8.) Where on the icloud would one find text messages or other saved info??
Thank you so very much for helping me!!!What I would say is best is to import the videos and photos to your computer so that you can delete camera roll photos with a copy of them in your possession:
http://support.apple.com/kb/ht4083
In regards to backing up Photo Stream
http://support.apple.com/kb/HT4486:
Does Photo Stream use my iCloud storage?
"No. Photos uploaded to My Photo Stream or Shared Photo Streams do not count against your iCloud storage."
However, you can do the tedious task of moving your camera roll pictures to photo stream by ensuring photo stream is turned on for your device and take a screen shot of each picture in your camera roll to move it over.
To take a screen shot, just press the "Home Button" and the "Sleep/Wake Button" at the same time while viewing the image.
1.) It's not a terrible idea, it can be tedious though.
2.) Deleting a bunch of photos/videos from a camera roll 4.5GB in size can definitely free up space
3.) Photo Stream photos, as you said, appear to stay upon deleting the photos. (Tested it personally)
4.) Photo Stream has a limit according to: (http://support.apple.com/kb/HT4858)
Essentially, it won't erase your photos until you tell it to.
5.) http://support.apple.com/kb/ht4083 (As shown above)
6.) To update iTunes, you must download and then "Run" the download you get off the website. Otherwise you will just have an installer program sitting there not updating iTunes.
7.) You can bring up your Photo Stream pictures anywhere you have Photo Stream capabilities. For a computer at someone else's house, they would have to have the iCloud control panel (http://support.apple.com/kb/dl1455) on their computer and be signed into their Photo Stream and viewing your profile's pictures (http://support.apple.com/kb/ts4379)
8.) On iCloud, you can backup your text messages, but you cannot view them independently on www.icloud.com.
http://support.apple.com/kb/ht4859
"You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails"
Hope some of this information helps! -
Hi guys ,
I am very troubled with my ipod touch because I don't see my ipod folder showing up on my computer. i have tried all possible ways to make it viewable but somehow i end up seeing only my internal storage (dcim/pictures). Its really frustrating because bought a new laptop with windows 8 and installed a new itunes but only to find out that i cant transfer my songs right away.... I can connect my ipod touch to the itunes swiftly but to transfer my songs from my ipod to my computer is such a hassle. so please if anyone could help me figure this out... I cant buy an iphone unless i fix my problem with my ipod.....
pls pls pls pls help meYou need a third-party program. The following includes listing such programs. It also included instructions form making this computer your syncing computer
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Maybe you are looking for
-
I am trying to sync my ipod info from my laptop to my desktop. When I did the transfer only 6 songs came through. How can I sync all my accounts. One email address is so old I no longer have access to it. Help???
-
How do I back up my itunes library to a dvd
This choice is no longer available under File>Library. How to you back-up?
-
I have duplicate pictures in my camera roll and photo stream. If I turn off photo stream will I loose pictures in both areas?
-
Can't change the Message Centre Number in my Nokia...
I have a 3 day old Nokia X. I can't send text messages due to wrong the message centre number set in my Nokia X device. When I try to change it in settings, a pop-up appears which say "It is bad to change SMSC Number. Do you want to change ?". I choo
-
I am using a Canon 8800 to scan my photos. However, when I go to save them, they show on MP navigator as 1 saved item but saves it twice in the file. It saves them over and over after that.I tried giving each photo a new file name and changed the for