HTC Droid DNA - How to enable Call Forwarding in GSM mode in International Network

Hi,
I have bought HTC Droid DNA (Verizon) from ebay in India and I am able to use any 2G or 3G GSM network as it not locked by Verizon  however there is no option to enable CALL Forwarding in phone settings.
Please help me and let me know how to enable call forwarding in HTC Droid DNA in GSM mode,

I don't think you can, call forwarding is enabled by Verizon here in the states.  Maybe check with your carrier?

Similar Messages

  • HTC Droid DNA issues after update to 4.2.2 (Software Version 3.06.605.4)

    Since updating my HTC Droid DNA to 4.2.2 last month, I have several recurring issues:
    The camera crashes (not every time, but often enough that it's VERY annoying) when taking HDR pictures (normal ones are OK)
    After a reboot, the keyboard reverts to the Google default, instead of my choice of SwiftKey
    On the plus side, battery life appears to be improved.
    Is anyone else having these problems?  Any suggestions on how to debug/get them resolved?
      - R

    The 4.2.2 OTA update for our phone is garbage. I broke my DNA took it back to best buy once i recived the new one i Stupidly downloaded the update.
    >>Rooting discussion removed to comply with the Verizon Wireless Terms of Service<<
    Message was edited by: Verizon Moderator

  • Buying a contract free phone from Verizon (HTC DROID DNA)

    Hi,
    I apologize if this is the wrong place to post this, but I cannot find answer to this question. I live in Europe (Croatia) but in a month I'l visit NYC. While I'm there my plan was to buy HTC DROID DNA from Verizon as a contract free phone. As it is a Global Network phone will it work with my own network carrier and sim card back in Europe?
    Thanks in advance

    The DNA will work on the following GSM/UMTS network frequencies (per the DNA info page), if your carrier uses one of these you should be good.
    Global Network: GSM (850MHz, 900MHz, 1800MHz, 1900MHz), UMTS (850MHz,
    900MHz, 1900MHz, 2100MHz)
    Good luck.

  • Wi-fi keeps dropping on my new HTC DROID DNA

    Just got the HTC Droid DNA on launch date. The phone is really good but one nagging thing i noticed was that the wi-fi keeps dropping. My wife got an SG3 and it works just fine along with the Nexus 7, Ipad2, ipod and a pc on the same wi-fi connection.
    Also sometimes the wi-fi is connected and the phone doesn't register an internet connection. Too much trouble to keep toggling wi-fi to get it to work. Has anyone else been having the same issue?

    I have the same exact problem. There's another thread about this as well:
    https://community.verizonwireless.com/thread/788277
    We haven't been able to find a fix, but it sounds very similar to the problem they had with the HTC One X back in June:
    http://androidcommunity.com/htc-one-x-wi-fi-problems-confirmed-as-hardware-issue-says-htc-20120618/
    Not saying that it is for sure, but with the HTC One X it was ultimately a hardware problem, which means we'd have to turn our brand new phones back in. Very disappointing.

  • HTC Droid DNA OTA updates

    Hi
    I bought an HTC Droid DNA about a year ago on ebay.
    I'm unable to get the OTA updates, since I live in Israel and don't have a Verizon sim.
    I've tried contacting HTC, but no solution was given.
    Is there anyway I could get the updates?!
    Thanks

    There might be a way to manually install the update, but you will have to check for it on HTC's website.

  • HTC Droid DNA help!!!

    hi
    i am yasin from turkiye. i am gonna go to usa this summer and i wanna buy a HTC Droid DNA. but i dont wanna buy it with 2years contract because i will use it in my country. so here comes my question; can i use this device with turkiye's gsm sim cards?(turkcell, avea, vodafone)

    Buy here ..is good place to finding many DNA for you pleasure.
    http://swappa.com/buy/htc-droid-dna-verizon

  • How to enable wi-fi in sleep mode?

    iphone 6
    IOS 8.1
    how to enable wi-fi in sleep mode?

    If you have cellular data plan for your phone and you have cellular data turned on, the fact that you do not have Wi-Fi at the time, you will still receive your messages, plus once the device starts to receive the message and "wakes up", the device will reconnect to Wi-Fi at that time.
    As stated by everyone that has posted so far, the fact that Wi-Fi disconnects after the phone goes to sleep is a battery saving feature of the phone. There is no app or other setting that will change that. Only keeping the device connected to power will keep the Wi-Fi radio active.

  • Can any one tell me how to enable call waiting in blackberry z3

    I'm not able to find the in de ice setting to enable call waiting, pls suggest how to do it

    In the Phone app, swipe down from the top of the screen.
    Tap > Call Waiting.
    Tap the Call Waiting switch.
    http://docs.blackberry.com/en/smartphone_users/del​iverables/47561/amc1343098614944.jsp
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Using Txn SE97  -How to enable called transactions?

    Hi Experts,
    I suppose you all had worked in the transaction SE97. For any t-code, SE97 gives a list of called transaticons.
    Now what i want to know is, how to enable the called transactions given here.
    When i tried to change the  "Check Indicator" value to YES, its not taking it.
    Should i do something else to enable it?
    For eg..
    i need to call t-code FBL1 (Called t-code) from FBL1 (Calling t-code).
    If you give FBL1N as your input in SE97, you will be able to see a list t-codes called by FBL1N with Check Indicators.
    Now let me know how to enable this indicator as it is not happening to me.
    Thanks & Regards,
    Ashwin

    If this is specific to a Business Views setting, then there is no SDK for that.
    Sincerely,
    Ted Ueda

  • Htc Droid dna Contact trouble

    Ok so my htc droid dan has some serious issues but last night the device completely reset everything. I lost all my contacts, and I'm not sure how to get them back when i go to backup assistant plus is doesn't work and i though i had them saved on my google account but clearly i didn't. i need to get them back anyway i can! please help.

        Koondog, I am so sorry to hear that your device has reset itself! That's so inconvenient to have to unexpectedly try to piece your information together again! To try Backup Assistant again, follow these instructions to clear the app. http://vz.to/1izKXrw
    My recommendation would be to clear the cache and clear data both on the Backup Assistant app, and also the app labeled Sync Service if available. Restart your phone, and try the backup again.
    Please let us know if this helped to retrieve your contacts!
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • How to setup call forwarding

    I am trying to setup call forwarding but unable to do as
    I know it is not that much difficult but prob I am facing is
    That when I try to put the number it does not give any option
    To confirm which mean the setup did not complete

    Hi Scooter,
    There are a few ways this can be done Have a look in CUCM under
    Call Routing> Directory number and see if it's set up there. You can have a DID/DN
    with Call Forward set up without an actual phone by doing it via this config.
    You can also check Device > CTI Route Point as the same "virtual" config can be set there as well.
    Cheers!
    Rob
    "Show a little faith, there's magic in the night" - Springsteen

  • Droid DNA WiFi issues. No wifi over gsm

    I just recently upgraded and got a DROID DNA just yesterday. I was told by the sales rep that the DNA can be used internationally over GSM networks. Today when I put in my sim card it the GSM network does come on but it fails to detect WiFi !!! It just says no network available. Please help me out because this is really really important for me!

    As well as what you have said about power cycling the Homehub etc have you tried a factory reset of the Homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out wireless problems. You will have to select the wireless channel again after you have done this because it will turn the smart wireless back on. 
    Do you have any other wireless devices, how do they perform? It could be that your computer is the problem rather than the Homehub. Have you checked the computers wireless network card drivers are up to date via the card manufacturers website rather than Windows.

  • I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

    I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

        Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • How to enable port forwarding in WRT300N

    i have WRT300N installed in my office
    need to give RDP session to 2 differnet machines connected in my router from outside i have T1 link
    with valide IP configured for the router
    please help me 

    To access your computer using RDC from a Remote location, Follow the steps below.
    Login to the Router setup page and click on Application and Gaming tab and under "Single Port Forwarding" in the Application Name type "Comp A" and in the Start Port : 3390 - End Port : 3389 , Protocol : TCP , Enter the IP address of the Computer and check the Box Enable.
    For 2nd Computer in Application Name : Type "Comp B", Start Port : 3391 - End Port : 3389 , Protocol : TCP ,  Enter the IP address of the Computer and check the Box Enable and click on Save Settings... 
    Once you are done with this settings, to access your computer using RDC from the remote location, Note down the WAN IP, which you will find it under the Status tab. To connect to your Computer A, in RDC type WAN IP:3390 and click on Connect, it will let you connect to Computer A. 

  • HTC Droid DNA

    Dear all,
    I've read this phone comes with  the possibility to insert a sim card?
    Is this correct?
    If so, will I be able to buy this phone and use it in Europe (Belgium).
    In other words, do they come unlocked?
    That's all :-)
    Thanx in advance!
    Regards
    Steven

    Ralph i'd say were your @ is probably about as good of a place as Any ((  I seen some Discussion in Android on the DNA that would be a good place as Well.  But as for Thread of it's Own i don't think one has been set up Yet.!  And with the new HTC 1 that's supposed to be on it's way to Verizon and eventually here the DNA might end up Not having a Spot of it's Own.. But then again the forum might decide to combine the DNA's  and  HTC 1's threads together we'll just have to wait and see..
    And..  Welcome to the Forum  b33

Maybe you are looking for

  • In imovie can you trim multiple clips at a time?  Also, can you randomly sort the photos?

    In imovie can you trim multiple clips at a time?  Also, can you randomly sort the photos?

  • How come i get alert sounds at every action in iCal?

    I got a little problem with iCal. Everytime I am doing an action in iCal I get this "error" sound/alart sound. Actions like editing an event, moving an event, making a new event, etc. make that sound appear. I doesn't seem like this is doing somethin

  • "Package operation failed" error when trying to create ICAP file

    Why is this happening? I create a new assignment and then select "Package for Incopy" and I get the error message "Package operation failed". What am I doing wrong?  For draft 1 of my Mac Indesign CS5 file I created a new "assignment 1" and ICAP file

  • Playbook doesn't see videos on Bold 9790 (Bridge)

    Hello, I try to get/watch videos recorded on my BB Bold 9790 using my PlayBook connected via bridge. The latest 9790 OS saves them as MP4 but browsing in the folders where those videos are located doesn't show any files. The result is the same if I t

  • Gcc and MacOS

    Hey there, I'd like to update my gcc compiler. The current version is: gcc --version i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5664) Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying