HTC Rezound updated overnight now can not send or receive calls but...

I can send and receive text messages, a message saying I have new voicemail pops up, and the 4G works fine.
The notification bar shows one bar as my signal to where yesterday it was a full 4 bars in my house but whenever I try to place a call it says call dropped.
My phone did an update this morning about 3:30am est.
the update name is ADR6425LVW_2.01.605.11-1.02.605.6
Status: Update Successful
Code:200
I've taken out the battery and everything. I can't call customer support since it's my only phone line. anyone with advice?

Hate to say it but maybe a factory reset. It is a Pain, but I do it when I receive large updates. Just be sure to having everything saved and backed up.
As for the signal bar, I would not be too concern unless the signal has dropped. You can see the signal strength by going
MENU>SETTINGS>ABOUT PHONE>NETWORK
Let us know what it is.

Similar Messages

  • I can not send or receive calls or texts from my s5. yes i have tried everything verizon suggest

    plz help

    Take in phone to a Verizon corp store for a new SIM card. They are free at VZW corp stores.

  • HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

    http://support.apple.com/kb/TS5185

  • HT1430 Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

    Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

    Is this on wifi or cellular data?
    Have you tried a reset? Hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
    Have you gone into the email settings and making sure the password are still there?

  • Using VoIP and can not send or receive fax. I am now also having problem scanning

    I use VoIP for phone service. I can not send or receive faxes although the Fax Test Report Pass. Now I am having problem scanning. My main concern is with faxing.

    Hi,
    This won't work for analog fax. You need a normal analog telephone line to fax this way. Please check the following article:
          http://hylafax.sourceforge.net/docs/fax-over-voip.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • When I went to open creative cloud, it said it needed an update, but after I updated it now can not get it to open up

    When I went to open creative cloud, it said it needed an update, but after I updated it now can not get it to open up

    what do you see when you try to open it?

  • I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    Try this repair, ensure you complete all the tasks and in the order shown:
    1  delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
    2  restart the Mac;   Apple menu > restart
    3  immediately after the start chime,  press the shift key until you see the Apple symbol.
             let it fully boot up,  it will take longer as the OS is repairing the drive
    4  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive  then First Aid tab and           click  repair disc permissions
    5  when complete, restart the Mac normally
    6  install Keynote from the Mac App Store
    Please report back to let us know if this helped.

  • Can not send or receive FaceTime on my Mac

    I have used FaceTime in the past on my iMac 10.8.5 but I can not send or receive now.  The app opens and all appears I n order but it won't work

    Hello Buttons11,
    The following article can help get FaceTime working for you again.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Cheers,
    Allen

  • I can not send or receive email on my Iphone 5S, error message.  Been like this for 3 days.

    I can not receive or send email from my Iphone.  Microsoft had server issues, says it is fixed but still can not send or receive emails.  Anyone else having this problem?

    The outrage is still ongoing, in the mean timeyou can use your browser to check your e-mail.

  • IOS5.0.1 constant error "iPhone can not make or receive calls.  Restore from iTunes":  I get this message and the phone will no longer work (happend once while on airplain mode and now once while in wifi only area, out of cell range).  help!

    All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4.  Newest OS.  Never happened with old OS! Cycling phone on/off does not help.  Ignoring message causes phone to cycle off then on.  After first time this happened, I restored.  Six days later...same problem!  Clearly a new fix is necessary.  Suggestions? 

    I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc).  Any suggestions?  What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?

  • Can not send or receive email

    Can not send or receive email

    What happens when you try to send or receive? Is there any error message?
    How do you connect to the Internet?
    Do other Internet services - such as the Web - work correctly?
    Who is your email service provider?
    Has it ever worked? If so, when did it stop? Were any changes made around that time?
    Best of luck.

  • My Ipad 2 verifies my email address on the ipad2 but I can not send or receive meassages. What is the fix?

    My Ipad2 verifies my email address on it but I can not send or receive messages. How do I fix this?

    I had this problem also. Yesterday, i called my e-mail provider. Turns out I had to change the port numbers in both the incoming and outgoing servers to numbers specific to that provider. Solved the problem.

  • A particular site has a message capability, but I can not send or receive messages.

    The web site Ashley Madison has a built-in messaging capability. I can not send or receive messages on this site. I tried the same thing on another person's computer and it worked. Is something blocking out this capability?

    Java Plug-in 1.6.0_10 for Netscape Navigator (DLL Helper) is too old for 3.6.8, you need 1.6.0_15 or higher with the Next Generation Plugin.
    http://www.java.com/en/download/index.jsp

  • I can not send or receive messages

    I can not send or receive messages or call or receive on my FaceTime. I have full Internet connection, and my FaceTime is on in my settings. Any help would be appreciated.

    Java Plug-in 1.6.0_10 for Netscape Navigator (DLL Helper) is too old for 3.6.8, you need 1.6.0_15 or higher with the Next Generation Plugin.
    http://www.java.com/en/download/index.jsp

  • Since the time warner outage i can not send or receive email.

    SInce the Time Warner Cable outage I can not send or receive any email from my phone. It keeps saying can not get mail. The connection to the server failed. What do i need to do to fix this? Please help!!

    Hey karenfromasheboro,
    Thanks for the question. I understand you are experiencing issues with mail on your iPhone. The following article may help to resolve your issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage,follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

Maybe you are looking for

  • BO Webi report giving WIJ 20003 exception

    Hi, I have a webi report which consists of some calculated fields based on Dataprovider SQL. A Report variable has been created to compare two columns and if they are equal then value is set to 1s otherwise, 0s. Based on the 1s I get, I want to displ

  • Custom File Info Panels Doc Available !!

    Documentation for creating your own custom file info panels is available at: http://www.adobe.com/products/xmp/custompanel.html I'm interested in hearing your feedback! The custom File Info panel for XMP metadata allows you to define, create, and man

  • Download NI-IMAQ for usb cameras

    where can i get the NI-IMAQ for USB cameras??? i woul like to download this application for my registered product

  • Sdo_util.simplify - Error? Bug? Totally stumped !

    Hi folks, I have a confusing problem/error with using sdo_util.simplify. I am using Oracle 11G R2 with Spatial Option. I have loaded just over 2000 UK postown polygons - based on an OS source. These loaded fine and have been working perfectly well wi

  • Ipad2 won't wake up.

    ipad2 won't wake up.  Itunes did not start automatically.  On manual start I get the error message "itunes could not connect to the iPad " ... " because an invalid response was received from the device"