HTC Rezound Will not Connect to Internet via Mobile Network

Hi,
I recently provided my phone to my youngest son so I went to Verizon and got a new sim card and had them set it up.  Everything worked for about a week or so.  Now the phone will not connect to the internet via the mobile network.  The only way he can connect to the internet is via the WiFi.
I have checked all settings and it all seems fine.  I also did 2 factory resets and still no go. I removed the Sim card, booted up phone and turned back off, re-installed the sim card and booted again.  Still same problem.  Signal strength is good but the 4g or 3g doesn't show up like it used to.  When I click on internet it says network not available and tries to bring up the WiFi. 
Do I need a new Sim card?  Is the phone messed up?  Anyone have any idea?

I was having the exact same problem and it was driving me crazy. After reading some other threads, I removed my original SIM card and started up the phone until the home screen tells you the SIM card is missing (Emergency calls only). Switch it off, put the SIM card back in and restarted the phone. Got my mobile internet (4GLTE) coverage straight away.
Hope if works for you too!
Good luck.

Similar Messages

  • Macbook will not connect to printer via the network

    I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
    I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
    "The "Canon..." printer could not be found in your list of printers" (altho it is listed)
    "Unable to get printer status (forbidden)"
    "Status: In use, Default" (altho the printer is ready and not in use)
    "Operation could not be completed -client-error-not-possible"
    Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
    The network works well supporting Macbook and several Tivos.
    Any help on what I should try next?
    Thanks for any suggestions
    John

    Hello John,
    For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
    For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
    So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
    If the printing still fails with the printed added as above, then please reply.
    PaHu

  • Thinkpad Laptop X4F -Will not connect to internet via wifi

    I'm not computer savvy so please keep replies dummied down if at all possible. I used this laptop last on Friday and booted it today and cannot connect to the internet via wifi. No problems whatsoever before this. Checked with other computers and devices in the house and the wireless network and internet are working fine.
    Checked this laptop and wifi is on (airplane mode off), says its connected to the router (in connections) but icon in tray just scrolls and says "identifying". Using the LAN works fine. Looked at wireless card and it says device is working properly and is fully updated.
    This computer is running windows 8 which I'm still having trouble navigating through.
    Solved!
    Go to Solution.

    Have you tried turning off the Wifi and then back on? Windows 8 should have that if you press the start key and typing in Wi-Fi. Click on Settings when you search and something for connections should appear. Turn off WiFi then back on to see if that helps.
    Owner of: ThinkPad SL510, X131e, X230 (not fond of)
    Other systems: MSI GT640, Sony Vaio PCG 709K, Dell Latitude D430,

  • Imac will not connect to Internet via wifi or Ethernet since upgrade.

    since the upgrade to Yosemite I am unable to connect to the Internet via wifi or Ethernet. All my other devices ipad/IPhone 6 work fine so issue is not with ISP.
    Any help would be greatly appreciated.

    I Have tried starting in safe mode and my internet works fine. But I lose all connectivity after reboot into normal mode.

  • Ipad will not connect to internet

    I pad will not connect to internet says I need to renew my lease

    Hi adriennefromsc,
    If you are having issues connecting to the Internet from your iPad via WiFi, you may find the following articles helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    Regards,
    - Brenden

  • All of a sudden my iTunes 10.1.1.4 will not connect to internet radio

    Hi all,
    All of a sudden yesterday, my iTunes 10.1.1.4 will not connect to internet radio. It has otherwise been working fine for almost two years.
    My internet connection is working fine for web browsing and email.
    I ran the iTunes diagnositcs and it showed me how to go in to the Windows Firewall settings to check to see if there was a connection... there was already one for iTunes in the list of accepted connections. Just to be sure, I created a new iTunes connection exception and it didn't help.
    The iTunes diagnostics test shows all information as being normal except this info, pasted in below, about the Firewall test...
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    But this information is partially incorrect, according to the Windows Firewall settings themselves.  My Windows Firewall settings show that iTunes is indeed enabled in Windows Firewall.
    I can access the iTunes store, but there doesn't seem to be any test in the iTunes diagnostics that makes it test to see if it is connecting to the iTunes internet radio server.
    Is there possibley a current problem happening with the iTunes internet radio connection?
    Thanks for any suggestions.
    numetro

    Hi movem,
    Are you saying that Apple has changed the URL for every internet radio station in the entire iTunes radio station library?... or are you suggesting that just some of the internet radio stations in my playlist changed their own URLs?
    It seems unlikely that it happens to be that every single internet radio station in my playlist of a hundred radio stations all happened to change thier URLs at the same time, since all of the stations in my playlist will not play from that playlist.
    When I went through and found some of the radio stations in the giant default internet radio station library in iTunes, I found some of my old ones that were in my playlist and they play fine and they can be put in to a new playlist and they play fine there too, but the very same stations still will not play from my old original playlist.
    So it makes sense if you are saying that Apple has somehow changes all the URLs for all the radio stations in iTunes, because that make sense since they all play from the main radio library.
    But, otherwise, to say that all the radio stations in my playlist happened to change their own URLs at the same time, that would be a bit far fetched.
    Did you get some news from Apple that this happened, one way or the other?
    PS: I'm having a hard time finding a few of the stations that were in my previous, original playlist as well... some of them have either disappeared, changed categories, gone off the air or changed their names.
    Thanks,
    numetro

  • MBP upgraded to Yosemite and now will not connect to Internet using a Cisco router

    I Upgraded my MBP mid 2010 to Yosemite and now it will not connect to Internet using a system that involves typing in my user name and password in an auto pop up window provided by Cisco security systems. Before, using Mavericks, it worked perfectly: boot up MBP and the Cisco pop up auto loaded. Typed it my password and hey presto, connected to Internet. Now, zilch. There is nothing wrong with the Cisco cos my iPad connects ok, as do both my iPhone's.
    the problem is with Yosemite therefore. Please help. I tried all the usual diags, etc to no avail.
    Message was edited by: AWAC

    Sounds like there could be some kind of compatibility issue between ICS and this Bluetooth device of yours. Is there any compatibility info from the manufacturer about which Android versions that's being supported?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Having problem with primary sever will not connect, my internet connection is working

    Having problem with primary sever will not connect, my internet connection is working

    Hello pp585,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes and Safari to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Have a nice day,
    Mario

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

    Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

    Hey sergioo9,
    Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • Green light on Airport Extreme but will not connect to internet

    I have tried restarting computer and Airport Extreme but it will not connect to internet.  Unit has been working great up until now.  I have made no changes in system.
    This Airport/time machine is 2009 version.

    The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
    It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
    Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
    Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
    Leave everything powered off for at least 30 minutes.  Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
    After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
    Power up the AirPort Extreme next, and let it run a few minutes
    Then power up other devices one at a time about a minute apart
    When the entire network is back up, check the network.
    It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
    To do that, power off the AirPort Exterme for a few minutes
    Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
    Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
    Power off the AirPort now, and start it back up in the proper sequence
    If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

  • Trying to setup airport for 1st time and it will not connect to internet, we also did not create a new network and cannot find this option again

    Trying to setup airport for 1st time and it will not connect to internet?

    You might try doing a reset of your AirPort unit.  Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
    For more advice, please describe all your networking gear.

Maybe you are looking for