HTC Rhyme crashed - trying to recover sms from sd card

Hello. HTC Rhyme crashed and I'm trying to recover SMS texts from the SD Card. There is a folder on the SD card labeled "sms_backup". WIthin that folder, there is an unidentifiable file that is 29KB. In the type of file block, it simply says "File." Can I restore these on the phone to a readable format - if so, how? Tried to transfer to a PC just for historical purposes, but regardless of which program I use to open it, it comes up in some type of cryptic code. Please help.

Jay1, I know it can be difficult to lose precious info on your phone! The phone does not automatically backup SMS. Do you remember previously downloading an SMS backup application? If you did, you can re-download that application to recover your SMS. Search for SMS backup applications in the PlayStore and give it a try.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Trying to Recover Data From Old Backup Exec Tapes

I have been tasked with recovering data from an old Windows XP machine with an HP C1537A DDS3 tape drive. The machine used Backup Exec to create the tapes. In trying to recover the data I constantly get an error that says the data on the tape is inconsistent. I tried to run the HP analysis utility but it said the error log of the drive was full and it would be necessary to do a firmware load to clear it. I therefore loaded the lastest firmware.
I ran the HP analysis utilities using one of the tapes as a scratch tape (to write over):
Test 'DDS Drive Assessment Test' started on device 'HP C1537A' at address '6/0.0.0'
Please reload your media. Do you wish to continue?
|__ Analysis Results
    ||__ DDS Drive Assessment Test version V08.11.2006
    ||__ Device Analysis for DDS Drives
    ||__ Firmware rev 'L411' is up-to-date for 'C1537A' as of Wed May 25 19:00:00 2005.
    ||__ You appear to have used tapes not designed for this drive.
    ||__ Please use tapes that are compatible with your product.
    ||__ Unsupported tapes have been inserted 6 times.
    ||__ You appear to be using very old tapes not designed for this drive.
    ||__ Non-MRS tapes tapes have been inserted 3 times.
    ||__ There were 9 rules checked.
    ||__ Testing has completed and no problems were found.
The tape that was used in the analysis was a maxlell HS-4/125s DDS3 tape -- the same type that was used to create the backup tapes.
Why does the drive think I am using "very old tapes not designed for this drive"? The tapes were witten to by this drive.
What is a "Non-MRS" tape?
The end results appears to be that "no problems were found" but Backup Exec reports that the tapes have inconsistent data.
Any suggestions on how to make the tapes readable by Backup Exec would be appreciated.
I am using Backup Exec 9.1 Rev 4691. Please do not suggest using a later version as this is the latest version that (1) will run on a Windows XP Pro box and (2) that supports the tape drive.

Saberman,
Have you tried the Enterprise/Business forum for this? I doubt anyone here on the consumer section will be able to help you with Tape Storage.
Here is the link to the Tape section of the forum.
http://h30499.www3.hp.com/t5/Tape-Libraries-and-Drives/bd-p/itrc-198
Good luck.

Error when trying to recover datafile from standby database to primary

hi friends,
getting problem with restoring datafile from backupset taken on standby database to primary database.
os: windows server 2003
db: oracle 11gR1(11.1.0.6)
i've configured standby database on two different hosts.
host1 - primary (db_uinque_name= prod)
host2 - standby (db_uniue_name= prodsby)
I've configure both database with recovery catalog. I take backup on standby database. users' datafile of primary database has been lost.i'm trying to restore from the backupsets taken on standby database.
with the help of - http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJCEFEG
on primary
c:\>rman target sys/password catalog rcat/password
rman>list backup for db_unique_name prodsby;
display the backupsets
rman>restore datafile 4;
Starting restore at 06-NOV-08
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1051 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 12:12:18
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
also use to tag to restore the datafile
rman>restore datafile 4 from tag='base0_prodsby';
Starting restore at 06-NOV-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 11:27:21
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
i'm getting above errors when try to restore the datafile.
when i issue the following command.
BACKUP AS COPY DATAFILE 4 AUXILIARY FORMAT 'C:\app\Administrator\oradata\prod\USERS01.DBF';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
please friends, try to help me to solve the problem.
Thanks,
Vihang

hi.
Its not necessary its a otherway around to recover datafile from this backupset and apply archivelogs to make datafile consistent.
yes, it ain't the right way to restore backup to primary location.
so how would i connect to standby database with primary and recovery catalog.
i need to connect to recovery catalog and primary site because i need to restore to primary location and recovery catalog contain all metadata and backupsets related information.
i also tried the following steps from oracle documentation.
Connect to the standby database as the target database:
CONNECT TARGET sys@standby
You are prompted for a password:
target database Password: password
Connect to the primary database as the auxiliary database:
CONNECT AUXILIARY sys@primary
You are prompted for a password:
target database Password: password
Back up the datafile on the standby host across the network to a location on the primary host. For example, suppose that /disk1/df2.dbf is the name of datafile 2 on the standby host. Suppose that /disk8/datafile2.dbf is the name of datafile 2 on the primary host. The following command would copy datafile 2 over the network to /disk9/df2copy.dbf:
BACKUP AS COPY DATAFILE 2 AUXILIARY FORMAT '/disk9/df2copy.dbf';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
getting this error.

Recovering photos from SD card

I lost some photos and was hoping to recover them from my SD card. It's a long shot since I took more photos today, but I'd still like to try. I downloaded some programs that scan your card to find the missing photos, but when I connect my camera to my computer, it only comes up in aperture and I can't get it to show up anywhere else. Because of this, the scanning programs aren't "seeing" the card. Anyone know how to make it come up on my desktop when I plug in my camera instead of coming up in aperture?

Use a card reader. Cards in a card reader show as drives in Finder.
Short of that, you might be able to set your camera to a mode that will cause the computer to see it as a drive. You'll have to consult your camera's manual to find out if, and how, you can do that.

CS6 Crashing...trying to recover library from XFL

I have this student who was working on his project that was an XFL, when Flash refused to open it this morning. When I found his file, it appears the DOMDocument.xml, MobileSettings.xml, and PublishSettings.xml HAVE DISAPPEARED.
I can see his library folder and the assets in there. Here is the million dollar question: HOW DO I RETRIEVE THE SYMBOLS FROM THE CORRUPTED XFL FILE?!
I've tried converting the file to an RAR and repairing it, but that didn't do anything.
HELP?
Thanks!
-Olden

I have this student who was working on his project that was an XFL, when Flash refused to open it this morning. When I found his file, it appears the DOMDocument.xml, MobileSettings.xml, and PublishSettings.xml HAVE DISAPPEARED.
I can see his library folder and the assets in there. Here is the million dollar question: HOW DO I RETRIEVE THE SYMBOLS FROM THE CORRUPTED XFL FILE?!
I've tried converting the file to an RAR and repairing it, but that didn't do anything.
HELP?
Thanks!
-Olden

Trying to recover data from partition

Hello, yesterday I ran into serious issues with the mac which had lead me to do a forced shut down, after which, the mac has only been able to boot through the recovery mode (cmd+control+p+r) that takes a while to complete. Leaving the mac to load by itself without holding the keys after the chime, would lead to the apple logo "loading" for hours on end with no sign of progress.
Once the recovery mode has finished "setting up" there are several options. Naturally, I wanted to recover all the data on my interal HD before I do any wipes. In Disk Utility, the partition for my internal hardrive is grayed out and I have not been able to access it through the application. In terminal the drive is known as disk0s2, and have had no luck accessing it either.
Here's the current issue..So after an hour of looking around, there are solutions on the web to use recovery software. One of them is testDisk. I placed files for that program on my external hardrive (through another mac pc) and I'm trying to access the files via terminal on my faulty macbook. In terminal, after cd'ing to the directory, and typing ./testdisk I get the message: Illegal Instruction set 4.
Online sources have mentioned a flag -mmacosx-version-min=10.x
but it has not done anything to change the problem. My macbook is running with an OS X version is 10.7.5. testDisk version is 7.0. I've been trying to run with administrator privilege using sudo command but it appears that the command is not available in recovery mode..
So given that I'm running the mac on 'recovery mode' with limited choices, what is the best way to go about recovering partition data from my internal hardrive? Am I on the right path?

...the mac has only been able to boot through the recovery mode (cmd+control+p+r)
This is NOT the recovery mode. This is resetting the PRAM.
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.
Restart
Hold down the Shift key as described below. This is a safe boot mode. This will do some extra clean up on your Mac.
Safe boot
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey  Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT
* continue to log into your account.
Can you log in via safe boot mode?
If yes, you might want to consider running the combo updater over your install to refresh your files.
OS X Lion Update 10.7.5 (Client Combo) 1.91 GB
http://support.apple.com/kb/DL1582
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.7.5 install from a regular update, just run the 10.7.5 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.7.4 to 10.7.5 . If somehow the 10.7.5 is missing something it should have, and that something isn't changed between 10.7.4 and 10.7.5 it will still be stale after the delta update.

Computer crashed, trying to recover lost mail and address book

My old computer died, I now have a new one. I've recovered the *.default folder from the old hard disk, but not sure how to use it in respect of a newly installed Thunderbird client on my new computer. I'd like to be able to recover my address book at least, but also old mail if possible. There's hardly anything in my new client at the moment, so one-for-one replacement wouldn't be the worst solution.

Matt, thanks for the response. The page you pointed to didn't help directly, it seemed to be referring to a much older version of Thunderbird? In any case, it did push me back to something I'd tried earlier and failed, with the nett result that I now have my old mail back. So, thanks to you for taking the time to answer, and thanks again for pushing me in the right direction.
For the record; I set up a dummy mail account, and located it's Mail folder in the ********.default location, then copied into that folder all the contents of the equivalent folder on my old hard drive. Next time I started Thunderbird all the old mail appeared under the dummy account. Result! :-)

Trying to Recover Data from broken Hard Drive - Device Wont Show in Finder

I just had the hard drive replaced in my intel iMac (the old one isn't working properly). The apple store folks told me they would not do any data recovery off the old drive, but suggested I might be able to get a SATA to USB adapter and plug the old drive in the computer.
The first time I plugged the old hard drive it showed up in the finder and I began transferring the old file. 6 GB into it the transfer stopped and the the old hard drive disappeared from the finder. Now the drive wont appear in the finder HOWEVER when I unplug it I get the "Device Removal" error.
A little about my broken drive:
Its a Western Digital 320 GB. Its not making any clicking sounds or anything, which makes me think it might just be the circuit board which is replaceable. But I don't want to waste $50 on a new circuit board if thats not the problem.
Any suggestions?

Basics of File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Trying to recover metadata from a lost DB

Hi:
We lost a DB instance and cannot recover. Ops replaced the broken disks and restored datafiles from backup, but "recover datafile..." for a specific datafile fails with OAR-01113 (file 89 needs media recovery). It calls for a file called arch1_120544.dbf which it (and I) cannot find.
Anyway....
What I'd really like to do at this point is to salvage the metadata. Is there a way to do this without starting the instance? Can I drop the problem datafile (and if necessary, the associated tablespace) somehow and then start the instance without it/them?
Thanks!

Nope, not yet...
SVRMGR> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SVRMGR> startup open pfile = "/odb0/oracle_projects/devodb/initdevodb.ora";
ORACLE instance started.
Total System Global Area 604451812 bytes
Fixed Size 103396 bytes
Variable Size 111763456 bytes
Database Buffers 491520000 bytes
Redo Buffers 1064960 bytes
Database mounted.
ORA-01113: file 89 needs media recovery
ORA-01110: data file 89: '/odb24/devodb/indexes/devodb_imp_idx_huge.dbf'
SVRMGR> alter database datafile '/odb24/devodb/indexes/devodb_imp_idx_huge.dbf' offline;
alter database datafile '/odb24/devodb/indexes/devodb_imp_idx_huge.dbf' offline
ORA-01145: offline immediate disallowed unless media recovery enabled
SVRMGR>

Trying to import images from sd card as copy to dng and crashes my program LR3.6

Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system. Any suggestions on how to correct this

Sounds like you need to check the permissions of where you are copying or exporting to. Repair permissions as well.

I'm trying to recover data from Time Machine but my Mac doesn't accept my Username

Due to inattention, I'm having to do a re-install of data which I had hoped to do from my Time-Machine b/u. In order to access this info, I'm required to enter my User-name & Password. I've entered what I thought was that info but the box just shakes and I'm trying every user-name I can think of with no success. How can I successfully regain my info and get back to where I was? My system is OS 10.9.1 and up-to-date

It sounds like those Cleaning program you initially used corrupted the current install of OS X. And to the point that no new install will work over the top of the corrupted install.
If the screen you are getting looks like this.
then your system is Auto starting from eithe rthe built in recovery HD partition or from the Online Internet system (I suspect the built in recovery HD partition). If you are also getting a globe on the screen then it is the online version.
This only happens when the system can't boot to a real version of OS X which also means OS X and or the partition is was installed to is corrupted or missing.
In any event before you try the clean reinstall or a Restore from your TM backup you should first Erase the Macintosh HD partition using Disk Utility (the botton option). Once when that is finished then try to do the restore from your TM backup and or a Clean fresh inbstall of OS X and then at first boot of the system using the Setup Assistant system to copy files, settings and Apps over from your TM backup drive.

PC crashed trying to reload iTunes from XML file.

I am trying to reload iTunes library from a XML file. I followed the support suggestions of draging and droping the file into the music tab in itunes. As well as placeing the XML file into the iTunes library itself. I have had zero luck with either. If I open the XML file I can see a ton of script and code. Can you reload iTunes from XML file at all? Help Any suggestions would be great.

OK, I decided to give Apple more money and bought iTunes Match. It seems to be more headachs than it's worth. And it's neglected by Apple. Last time I'll be doing that! that's for sure!

Trying to recover music from my ipod

I had my computer stolen, and luckily had most of my music on my new 60gb IPOD that I got for xmas. However, the new computer wants to reset and delete everything on my ipod. When I go to Itunes and select import, it finds nothingon my ipod to import. How do I get the music from my ipod and onto my laptop so I can make/manage playlists.

I was told by Apple that you cannot sync ipod to a different computer. They also told me that it will erase the music on your ipod and resync it and add the music on the other computer. This is to prevent us from sharing music.

Trying to recover files from Vista back-up to Win8

My Compaq Presario CQ50-210US hard drive crashed this past Friday. I was able to create a back-up file before it completely died. I ended up buying a new Toshiba laptop running Win8. When I open the SD card with the back-up I'm seeing an EXE file, running it showed I was missing two DLL files. Got those installed and the back-up is still not running.
Is there a way I can download and install the right HP recovery software onto this Win8 machine to at least open the EXE and see my files to transfer (move, copy/paste) over? I'm not so worried about programs as I have most of them but my pics, files, settings, etc for a few different programs are very important to me.
Thank you!
Jaime

The password would be either your iTunes ID password or your admin password for the Computer.
MJ

Computer crashed - trying to recover!

I now have a new PC hard drive and have re-installed the software for m500. My m500 does not have my current files. However, I did back up my "Palm" folder from my PC to an external HD. Is there a way to bring all my contact data into the newly installed software on my main hard drive?
Thanks so very much!
Butlerkid
Post relates to: Palm m500
This question was solved.
View Solution.

Look in the Palm folder for the Palm Desktop username folder on the hard drive that has the Palm folder. Copy that folder. Paste the folder in the Palm folder on the new hard drive. If you are using the exact same version of Palm Desktop, this should work.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=m-series&mn=m500&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

HTC Rhyme crashed - trying to recover sms from sd card

Similar Messages

Maybe you are looking for