HTC Sensation not able to open text messages sent from iPhone4 iOS6

Up until I installed iOS 6, my friend had no trouble receiving and opening a standard (green) text message sent from my iPhone4. After the new install, his phone receives the message but as a text file that won't open. He hasn't changed anything on his end nor have I changed anything else, so I'm assuming this must be the culprit. Has anyone else had a similar issue? Thank you for any suggestions.
Bryan

Have you figured this out yet?

Similar Messages

  • Audio is not decoding properly on text messages sent from Motorola Android. Video plays fine but audio is unintelligible chirping.

    I have iphone4. Some inbound text messsages with imbedded video clips do not play the audio properly. Audio chirps as if bad decode. Is there firmware/software updates or other apps to help with this issue?

    Harm, I didn't pay attention to those settings, I should have. I got hung up in the preset names and figured those were my only choices. How green I am, lol. I made a preset with a Target of 4 (max 6) and VBR 1 Pass, and I knocked the audio down to 128K being it's just speech, and it all worked great. The new file plays in both players perfectly and also plays on my iPad with no jitter. Filesize is about 240mb but that's fine, it works. Problem solved and in the books. BTW, I use a GTX570.
    Jim, I agree, VLC is super, it was the only player that would play 5D Mark II files right out of camera back in 2008, on my dual core Dell laptop with a cheesy Nvidia 7900 graphics card. Problem is, the majority of people I'm sending these MP4s to are Mums & Dads in our church, etc, and you know quite well that those folks are running some consumer Dell or HP setup they bought at Costco on closeout.
    Funny backstory, when the 5D2 came out in Sept 2008, that was what thrust me into video. So I immediately bought the Prod Premium CS4 Suite (already owned Photoshop for a few years being a stills guy) and installed it on that Dell 17" laptop I mentioned above. After getting the 5D2 finally in Jan 2009, I actually had the nerve to take my first attempt at creating a video in Premiere and encoding it on that laptop. I literally had to kill AME partway through because I was seconds away from burning out my processor (I had been using RealTemp because of how hot that thing ran using Word, lol). It was that event that made me convince myself to start researching how to build a real editing PC (using an i7 920 at the time). I probably drove Harm nuts back then with all my questions, lol! But this rig has been my workhorse and has been through countless upgrades, the only thing remaining from the original 2009 build is the case and the power supply.
    I know, you guys didn't need all that info, just felt like shooting the breeze. Thanks again!

  • I only recieve n not able to send text messages,,plz help

    i only recieve n not able to send text messages,,plz help

    Try this: Go to Settings > General > Reset > Reset Network Settings. After that, check if you can already sends SMS

  • TS2755 I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number.

    I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number or short code.  I have deleted this contact and re-entered numerous times and still get the same error code.  Any ideas?

    Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?

  • After upgrade to 7.1 not able to receive Text message

    After upgrade my iphone 4 to IOS 7.1, I am not able to receive text message. I am able to send text message and also send and receive iMessage but not able to receive text message.

    Hi ahiphone,
    If you are having issues receiving text messages after updating to iOS 7.1, you may find the troubleshooting in the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • Photos app in my mac is not able to open the iPhoto library from my external hard disk.

    I am using iMac (21.5-inch, Late 2013) OS 10.10.3. i have 2 iPhoto library one on my Mac HD and the other on my External HD which i primarily use and which has all the latest photos in it. Now with the new update to photos app in Mac i am not able to open the iPhoto library from my external HD. I get the following error message please help.  

    i am not able to open the iPhoto library from my external HD
    How is the external HD formatted? Is the filesystem MAcOS Extended (Journaled) as necessary?
    Is theHD directly connected or by a networked connection?
    Have you tried to set the "Ignore Ownership on this volume" flag?
    See how to prepare the drive for storing an iPhoto Library on it in this document: iPhoto: Sharing libraries among multiple users
    Which version of iPhoto created the library? If it was iPhoto 7.1.2 or earlier, download and run the iPhoto Library upgrader.
    iPhoto '11 or later: About the Library Upgrader - Apple Support

  • TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

    I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

    Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on.  Then see if you can access Settings.

  • HT4528 On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

    On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

    I'm not sure what you're asking.  Are you writing a program that results in the error when you test it?  (This is the developer forum).

  • I'm not able to edit text in Numbers from my iPad.

    I'm not abl to edit text in Numbers from my iPad.  The files were originally created on the iPad and for years have worked effortlessly between my Macbook, iPhone and iPad.  After the last update in Numbers (Can't remmember if it was on the Macbook or iPad) I've had this issue.  Any solutions please?!

    for years have worked effortlessly between my Macbook, iPhone and iPad.
    You were lucky!  I had frequent syncing troubles with the old Numbers.  The new Numbers syncs well.
    Are you are running the latest version everywhere?
    Numbers on iPad: 2.0.1
    Numbers on Mac: 3.0.1
    iOS: 7.0.4
    If you're still having trouble, try creating new documents and copying your tables over from the old documents. There may have been a glitch somewhere when you imported the old documents into the new version.
    SG

  • My wife and I each have an iPhone 4S. With the upgrade to ios6 all text messages sent from my phone show up on hers to include responses from my text. text that she sends from her phone appear as if from mine. How do we stop it?

    My wife and I each have an iPhone 4S. Ever since the upgrade to ios6, text messages sent from my iPhone also appear on hers? All response to those text also show up on both devices. Likewise, text sent by her appear to others as having been sent from my iPhone. I have tried turning group messages off but nothing works. How can I correct this on both phones? Appreciate any help.

    Rectory wrote:
    Please can someone tell me how  I can change this so when I send a mail from my phone and from the IPad that it reads from me.
    You need a separate email address but you've already ruled out that solution.

  • Text messages sent from or to my iPhone do not appear on the Verizon Messanger web app.

    iPhone text messages do not appear in the Verizon Messenger web ap. Any Ideas why this happens? All other text messages I can still receive!!!

    If you are referring to iMessages, they won't show up in the Verizon Messages app since they don't go through Verizon's servers, they go through Apple's.

  • Text Message sent from LabVIEW using ActiveX and Internet Explorer

    I am fairly new to LabVIEW and I am trying to make a VI that will be able to text me and let me know when a test is about to be done or if something has caused it to shutdown.  My VI uses www.onlinetextmessage.com but I can't get it to click the Send Message button. 
    I can get it to insert text in the text fields.  I just can get it to click send.
    Can you help me?
    Solved!
    Go to Solution.
    Attachments:
    My Texting.vi ‏38 KB

    MoonMan wrote:
    Well it sure seemed like that should have worked but no luck. When I try to add the FormElement with submit in my VI after I wire in the reference wire it automaticaly changes to a regular Element.  Then it wont run because submit is not an option for Element, I have to change the submit back to click. 
    I dont understand, it really seems like the click should work, and it seems like the submit should have also worked.  Getting text into the different fields was easy enough.
    Did you try my modified version?  That uses IHTMLFormElement properly.  If you then change the element name from "Send Message" to "txtmsg" (the name of the form), it appears to work - or at least, it pops up an advertising window in Internet Explorer (I didn't fill in any of the fields as I don't want to give out my phone number or email address to some random website, especially one that pops up advertising).
    When you try to change to FormElement, what steps are you taking?  Are you changing the type of the "type" input to Variant to Data?  You'll need to right-click on that constant, Select ActiveX Class... and choose IHTMLFormElement.
    As a LabVIEW style note, you should close all the ActiveX references you open.  That means all the references (IHTMLFormElement, IHTMLElementCollection, etc) need a Close Reference when you're done with them.
    Again, I think sending an email is a better way to send a text message from within LabVIEW, and for that matter, you might be able to find a better website for doing it.  TMobile allows their subscribers to send SMS messages through their website and it appears that AT&T provides a similar service; Verizon provides a web page to send SMS to their users.
    EDIT: by the way, the submit button is not a named element (it has a "Value" property but not a "Name" property) so you can't get a reference to it by name.  If you probe the item output of the IHTMLElementCollection property node, you'll see it returns an empty variant, which is why "click" has no effect.

  • How NOT to save iCloud Mail messages sent from iPhone?

    Using iCloud Mail on a MacBook / Safari, e-mail messages are NOT saved - the relevant box in Preferences is unchecked. However they are saved in the Sent folder when sent from an iPhone. Is there any way they are NOT saved either way?

    Again, ON MY IPHONE only has Sent option. There's no way you can set the Sent mailbox to any Trash anywhere.

  • I am not able to delete text message(sms) sometimes

    Sometimes, I don't know My IPhone 4G go weird, I am trying to delete txt message from message app. I said Edit and click on button it should ideally show delete button, pressing that would delete the text. But here it when I press delete comes and soon disappears.
    Any Idea why?
    Thanks,
    Sushil

    Q3: My Ans: I have this problem again. That means, I had similar issue as posted in my query and it was resolved. This has reoccurred again, so m worried
    If you phone was never jailbroken and you've done all the troubleshooting steps short of restoring as new, your only choice is to bite the bullet and restore as new. You'll have to decide for yourself whether the inconvenience of your problem is worth the effort needed. There are no quick fixes and ignoring it may lead to further problems.
    Note that if restoring as new doesn't fix it, there is a hardware problem which needs warranty evaluation. You'll need to return it to Singapore as the warranty is country specific.

  • Is it true text messages sent from my IPad can not be sent only to individuals who apple have iPhone or iPad  technology?

    I can not text individuals who do not have iPhones or IPads from my iPad.

    You can also send to iPod Touches or Macs.
    If one does have an iPhone it can be used in conjunction with an iPad, iPod Touch or Mac to send SMS/MMS messages to non-Apple devices.

Maybe you are looking for

  • Tab canvas after content canvas impossible?

    I am still having problems with tab canvases that come after content canvases in Designer 6i. I have changed the QMSO$BLOCK.QMS$BLOCK_INFO VISIBLE property to YES and this allowed me to generate the form, but now I have the little QMS$BLOCK_INFO item

  • Japanese attachments in Mail

    I am using both an iMac and a Powerbook with latest verison of OS and problem is same on both. Encoding has been set to ISO-2022-JP via Terminal and all Japanese subject lines and text in the body of the mail work perfectly. However, an attachment wi

  • Remove "display in external browser" button

    Hello, I'm working on setting up OHJ for my company and I was wondering if there is any way to remove the "display in external browser" button from the viewer window. We would use the help class instead since it doesn't have this button, but we need

  • Login session variable - pls help before i slot myself

    im brand new to this guys and really struggling with logging in a member to their particular account as opposed to a general members section using dreamweavers login application and some basic php coding. i just cant seem to figure it out it (im stuc

  • Attach pdf not as an attachment

    i would like to take a PDF file and send it in the body of an email and not as an attachment so that when the email arrives it is open, can that be done?