HTC TB with Ford SYNC USB - "HUBS NOT SUPPORTED"

Anyone else set up their Thunderbolt with Ford Sync over USB connection? I am unable to get it to work. I get "HUBS NOT SUPPORTED" on the SYNC screen no matter what setting I use on the TB. Bluetooth works fine but the audio quality is horrible. This is why I'm trying to get USB to work.

I've had a similar issue and I haven't found a resolution to the problem. However, when connecting with bluetooth, the quality is much better if you turn the volume all the way up on your media device -- that way it's sending the most powerful signal to the car. Then control your audio volume through your car for best results. Hope this helps you until htc (or verizon) comes out with a fix to the problem.

Similar Messages

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

Verizon Phones compatable with Ford SYNC

I am new to this forum. I fact I have never used a forum before. I am over 65 and do not understand how the forum is related to asking Verizon a question or offering a suggestion. But here goes:
When I go to the Verizon home page and queery Ford SYNC I get no results. I suggest that Verizon address Ford SYNC on its site. Specificially address which phones are compatable with Ford SYNC for 2010 and 2011 vehicle being produced by Ford. (Edge/Explorer)
I guess my main question is: Just because a phone has bluetooth capability is it compatable with FORD SYNC?

shadowdog3 wrote:
By reading comments and experience with Verizon. I'd say it's Verizon's problem. The company is the most technologically lame entity I've seen. These guys refused the iPhone! They have least technologically advanced phones on the market. Where are their dual-cores? I have the htc Thunderbolt-Horrible!! Ha, what a waste of hundreds of dollars. I want my money back...
the iphone ends up costings carriers money
verizon doesn't make the phones or the car
verizon has plenty of dual core phones
you have a phone that is 13 months old, in this industry that is a dinosaur

How does the newest Iphone work with Ford Sync?

How does the new Iphone work with Ford Sync? I was thinking of purchasing the 4s but may go elsewhere if there is a better phone for the equipment in my vehicle.

That would be a NO.. I should have done my homework before I switched to IPhone because the Bluetooth just does not want to sync with my Ford Truck. Its such an inconvience. But I see from other posts that Ford isn't the only car experiencing problems. So Hopefully Apple fixes this problem QUICKLY!

Has anyone had any issues after syncing 4s with ford sync

I do not recieve any notifications on my text messages after i paired my phone with my ford sync.

I am not trying to text......I have issues with my iphone not sending me alerts when i get a text after i paired it with my Ford. I know it cant send or read text messages. But now i dont get alerts even when it isnt paired. I dont know if this is a problem with the iphone or with the Ford Sync.

Does the iphone 4 work with Ford SYNC? I recently lost all my contacts and think it had something to do with SYNC. Any suggestions?

Anybody else had problems with Ford SYNC and iphone 4?
Lost all my contacts. Any way to recover them if they haven't been backed up?

The complaints I've heard most are due to the fact that the iPhone will not let you use the sync system to read and compose text messages, etc. I vaguely recall somthing about address books not syncing properly, but I've never heard of the sync system wiping the address book on the phone. It shouldn't be possible as the iPhone only supports PBAP for contact syncing, which is one way.
In any event, if the contacts were not synced to something and have been lost, there is no way to recover them, no matter what it was that wiped them.

E3000 shows "USB is not supported" error with External Harddrive

I have the E3000 router and recently purchased a USB WD (Western Digital) 2TB External Harddrive. I plug the Harddrive into the router, open the router homepage (http://192.168.1.1/) then click on Storage > Disk and I get a "The attached USB is not supported" error - any suggestions on how to fix this?
Thanks for any help!
Solved!
Go to Solution.

Likely Final Update: WD Support sent me a link to download / install SmartWare and solve the problem I was having with the SmartWare software ("Drive Settings" was greyed out). Once I got SmartWare back up and running I was able to change the "Drive Settings" within SmartWare. As the last update suggested, I modified the sleep timer settings and security (password settings) and tested to get the following results:
Sleep Timer on / Password protection on: E3000 shows "USB not supported"
Sleep Timer off / Password protection on: E3000 shows "USB not supported"
Sleep Timer on / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
Sleep Timer off / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
So (other than maybe some inital problems with the WD SmartWare) it appears the "USB is not supported" error is due to the Password protection being turned on for the External Hard Drive. This point should be highlighted in the Western Hard Drive materials but I don't see it anywhere on the box or in the manual (maybe its fine print in the manual). Cisco and / or Western Digital are screwing us by not allowing password protection (or making this point known) on at this least model of Hard Drive!
Thanks again to everyone that helped with troubleshooting this!

USB Hubs Not Recognized After Restore

Hello Lenovo Forums!
I have a t61p 6450CTO lovely work laptop that I adore ... upgrading now to 500gb and 4 g of ram ... but I recently restored to original second tier (saved my files) and ... to get Lenovo ThinkVantage working again and System Update. It works great!
Now I cannot upgrade to SP1 on Vista home premium. Also USB HUBS not recognized, (can't print) even after going into bios and updating USB to enable and enable all the time --- AND cannot install Windows Updates except SOME one at a time. So I recently ordered Windows Vista upgrade might help and have a fresh operating system yes?
Any help is appreciated! About to do another restore ... thank goodness for that still working! Steve in Ohio

someone? please

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario

No connection with PC suite: USB device not suppor...

I got a new C2-02 and connected it to my PC with the USB cable which was in the package. But every time I connect the cable to my phone I got the mesagge 'USB device not supported. Unplug cable'
Therefor I cannot submit my phone to the list of devices in Nolia Suite.
I used different USB ports on my PC, but no luck.
What is the problem here?

Thnx Abi99 for reply
But sending it back to a c are centre is a bit of a hassle, isn't it. It's a new phone. There's no official Care centre in the Netherlands, except an very expensive 0900-xxx phone number. This sucks..hard..Any other suggestion is highly appcreciated.

How to fix "Modifying a column with the 'Identity' pattern is not supported"

When doing Code First Migrations my mobile service always errors in the seed method with: 'Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Methodology' for the CreatedAt column. All my
models inherit from EntityData.
// Sample model
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using Microsoft.WindowsAzure.Mobile.Service;
namespace sbp_ctService.Models
public class Methodology : EntityData
public Methodology()
this.Scenarioes = new List<Scenario>();
public string Id { get; set; }
[Required]
[StringLength(50)]
public string EntryMethod { get; set; }
[Required]
[StringLength(50)]
public string TestDirection { get; set; }
[Required]
[StringLength(50)]
public string PassCriteria { get; set; }
[Required]
[StringLength(50)]
public string Dependency { get; set; }
public bool ExtraInfo { get; set; }
public virtual ICollection<Scenario> Scenarioes { get; set; }
And in my Configuration.cs file during an update here's my seed method:
protected override void Seed(sbp_ctService.Models.sbp_ctContext context)
// This method will be called after migrating to the latest version.
context.Methodologies.AddOrUpdate(
m => m.Id,
new Methodology { Id = "Methodology1", EntryMethod = "P/F", PassCriteria = "P/F", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology2", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Round" },
new Methodology { Id = "Methodology3", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "In/Out" },
new Methodology { Id = "Methodology4", EntryMethod = "P/F", PassCriteria = "Best", Dependency = "None", ExtraInfo = false, TestDirection = "Out" }
For some reason on an update the CreatedAt field is created and given a value of null. So of course on an insert/update it will error because CreatedAt is an Identity field.
I've tried to configure the modelBuilder in my context to tell it that CreatedAt is an identity field, but that still doesn't work.
modelBuilder.Entity<Methodology>()
.Property(m => m.CreatedAt)
.HasDatabaseGeneratedOption(DatabaseGeneratedOption.Identity);
So far the only way to fix this is by commenting out my Seed data, but it's not a fix. I've seen other solutions where you can force it to not serialize certain fields, but I don't know if those solutions apply.

So I think this occurs because you might have created the database (Code-first) with POCOs that didn't have the CreatedAt field in them. I think that's what I did and the easiest way to fix it for me was to delete my database and re-create it with my POCOs
inheriting from Entity Data from the very beginning. We were still in development so it worked out for us but I know some people might not be able to do that. Here's what my table looks like after it was created correctly:
USE [database_name]
GO
/****** Object: Table [sbp_ct].[Methodologies] Script Date: 2/24/2015 9:48:45 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [schema_name].[Methodologies] (
[Id] NVARCHAR (128) NOT NULL,
[EntryMethod] NVARCHAR (50) NOT NULL,
[TestDirection] NVARCHAR (50) NOT NULL,
[PassCriteria] NVARCHAR (50) NOT NULL,
[Dependency] NVARCHAR (50) NOT NULL,
[ExtraInfo] BIT NOT NULL,
[Version] ROWVERSION NOT NULL,
[CreatedAt] DATETIMEOFFSET (7) NULL,
[UpdatedAt] DATETIMEOFFSET (7) NULL,
[Deleted] BIT NOT NULL,
[Name] NVARCHAR (MAX) NULL
GO
CREATE CLUSTERED INDEX [IX_CreatedAt]
ON [schema_name].[Methodologies]([CreatedAt] ASC);
GO
ALTER TABLE [schema_name].[Methodologies]
ADD CONSTRAINT [PK_schema_name.Methodologies] PRIMARY KEY NONCLUSTERED ([Id] ASC);
Does yours look something like that?

"there was a problem connecting to the server. URLS with the type 'file' are not supported"

i have a new macbook pro 13" and every 6 minutes or so it pops up a window that says "there was a problem connecting to the server. URLS with the type 'file' are not supported". it never seems to cause any problems but is supremely annoying. how can i make this come to an end?

I tried someone's solution of taking another external disc and plugging it in, then when it showed up and time machine asked if I wanted to use it or that someone might be trying to trick me, I chose not use it. Then I shut down my computer, plugged in the original Lacie, and rebooted the computer and all seems to work fine now-- the Lacie appears on my desktop and all seeems to be in working order. Who knows why or anything else,- as weird as it gets- but for now things seemed fixed--- maybe others can try this too-- it worked for me so far.

"There was a problem connecting to the server. URLs with the type "file:" are not supported. Why? What can be done to eliminate it?

After upgrading to Mountain Lion, I repeatedly get this message: "There was a problem connecting to the server. URLs with the type "file:" are not supported.
Why?
What can be done to eliminate it?

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Message - There was a problem connecting to the server. URLs with the type "file:" are not supported

new macbook pro receving this message: There was a problem connecting to the server. URLs with the type "file:" are not supported. What is causing this and how do

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

There was a problem connecting to the server. URLs with the type "file:" are not supported. OK

I have just upgraded to Mountain Lion from Leopard, but now I keep getting this message when I open some web-pages and every time I wake the Mac up after going to sleep. For some odd reason I get it in Swedish sometimes (installed language) and some times in English...
There was a problem connecting to the server.
URLs with the type "file:" are not supported.
OK
What is this and how can I get rid of it. I use Firefox and have updated to latest version.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

HTC TB with Ford SYNC USB - "HUBS NOT SUPPORTED"

Similar Messages

Maybe you are looking for