HTF do i get my iPhone to connect to network after iOS7 upgrade? (Upgrade--really?)

HTF do i get my iPhone to connect to network after iOS7 upgrade?  Upgrade?  Really?   I'm just really upset that I have to continually make concessions to someone else and my product does NOT work the way it should, and has done in the past!!!!

Depends on your browser and it may appear in your downloads folder to run.  If you are using IE, it will appear on the bottom of the screen, Google Chrome, bottom of the screen, Firefox, top of the screen with an big arrow

Similar Messages

  • Express will not connect to network after Extreme firmware upgrade to 7.2.1

    I got the auto update notice for a fimware upgrade to my Extreme to 7.2.1. Once I upgraded I am no longer able to connect my Express. I have done all the resets and have gone through all configuration each time, but after it resets itself after configuring it, it no longer shows up in the AirPort Utility until I reset it again. The only thing unique about my Extreme config is that I have the Radio Mode set to 802.11b/g compatible. This was necessary to connect TiVo wireless USB adapters to the network.

    I can tell you that you are not alone - I have tried to crack this one for some days - Im just following the instructions from the Airport assistant and it dosn't work

  • How do I get my iphone to connect with my PC via WiFi

    How do I get my iphone to connect with my PC via WiFi?

    I Believe you are trying to use personal hotspot so you can use your 3G/LTE on your pc.
    If that's the question, you'll need to turn on "Personal Hotspot" in settings (it's right below bluetooth), then go to your Mac/PC and connect to your iphone as you would with a normal wi-fi connection. You can change the random default password in the same menu where you have turned on "Personal Hotspot"

  • Iphone is not detecting network after updating, i m not able to configure it

    my iphone is not detecting network after updating, i m not able to configure it

    To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

  • HT4623 I have an iphone 4s that is hung after agreeing to upgrade to IOS 6.  Any Help?

    I have an iphone 4s that is hung after agreeing to upgrade to IOS6.  Any Help?

    Thank you. I did try this, but the Apple Server would not connect, indicating that the network would not allow connection. I checked the set-up, there did not seem to be anything wrong. The network is Wi-Fi, high speed, and the interactions to iTunes work except when trying to do the iOS update. So, I think it is time for a trip to the nearest Apple store. Thanks again for the help.

  • I have problem with Access Connections on L412 after that utilyty upgrade

    I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
    It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
    And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
    I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

    Access Connections is definitely broken for WPA encryption.  Both versions 5.02 and 5.84 fail for me.  If I use the Windows XP wireless configuration instead of Access Connections, everything works.
    Does anyone know how to report this to Lenovo?  I chased links around the web site but couldn't find a place.

  • I have a toshiba lap top computer with vista and I can not get my iphone to connect all the way .. it says "connected with limited activity"?

    I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.  

    Hi all,
    Guess I understand what is going on as I'm also experiencing the problem.
    Basically the issue is about the iPhone 4's personal hotspot.
    I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
    The hotspot works well on other laptop and I-devices, but not my toshiba...
    Hope to get assistance here. Thanks

  • Can someone tell my why I cant get my Iphone to connect to Itunes

    Having trouble getting IPhone to connect to Itunes

    Unless you provide more details, we would just be guessing.
    Let's start with the obvious.....
    Your computer is turned on, correct?
    The iPhone is powered on, correct?
    You plugged the cable into the iPhone and the computer, correct?

  • Why wont my iphone 4s connect to wifi after updating to 6.1.2

    My iphone wont connect to my home wifi since updating it to ios 6.1.2  i cant even slide the button across anymore . Can anyone help please

    reset
    http://support.apple.com/kb/HT1430
    restore
    http://support.apple.com/kb/HT1414

  • Can't get ethernet bridge to connect to network

    Hi
    I am trying to connect my old iMac G3 (10.2) to my airport express network with an Aeropad Mini (an ethernet bridge powered by USB hub on my mac - made by Macsense).
    The network is seen successfully by an iMac G5, an Intel Macbook and a PC. The connection occasionally works but more often than not it does not see my airport express - instead it connects to a self-assigned IP. Sometimes it connects then drops off halfway through. Other times it just will not connect at all.
    There are no drivers and you set it up via your browser. I can connect to the status and set-up page (192.168.1.50), after entering all the Aeropad info manually, and most times it can see my Airport Express (via the Site Survey on the set-up pages). but sometimes it does not even get that far. I reset the aeropad and restart the mac many times, and sometimes it works but mostly it doesn't.
    I'm using channel 11 and it's WAP-encrypted.
    Things I've tried:
    updating the firmware from the macsense website
    checking it's on client mode
    manually entering the DNS address of my router - 10.0.1.1.
    Trashing the internetconfig preferences from the library
    making sure that ethernet is at the top of my network port configurations
    Plugging it into a powered USB hub
    Trying it on my MacBook (running Leopard).
    Still can't connect - just a self-assigned IP - even on on the new macbook.
    Any help would be appreciated as I really can't get this to work and it's beginning to take over my life!. I thought it was working after I entered the DNS address but it just went down again the next day.
    Thanks.
    Message was edited by: Joanna Leapman

    This is probably repeating the steps which you have taken already, but I thought I'd put them in one place just in case.
    Problem:
    If you're able to see other wireless networks but not your own. (And it works with AppleTV version 1.x)
    It can be any of the following:
    1. No wireless signal/out of range (check your multicast setting and put this as low as possible, check the range with other wireless devices/moving your appletv closer)
    2. The wireless SSID is set to invisible/private (use "Other" on AppleTV and enter the SSID manually.)
    3. The AppleTV doesn't support the channel used. (Tune the wireless to use a lower channel such as those under 10.)
    4. The AppleTV is not supporting the security of your encryption.
    Troubleshooting:
    1. First try setting up a basic wireless network with no security, no frills such as a high multicast rate or high channel number and as a basic wireless b or g network. Position the AppleTV next to the basestation and then attempt to make the appletv connect to it. (Do not use an AdHoc network with your mac, as the AppleTV doesn't see these.) At this stage you're just trying to see if the AppleTV is even able to connect to your hardware. If this doesn't work there is possibly a larger problem at hand.
    2. If this works, then move the devices to their desired locations. (This checks that it's not a range/interference issue.)
    3. If this is still working, then the problem lays in a configuration setting. Firstly enable a security protocol, avoid WEP. Keep adding settings, keeping changes from the default to a minimum.
    If you can't get past step 1, then it could be an issue with your wifi base station. Try getting the AppleTV to connect to a different wireless basestation (perhaps borrow one from a friend or a neighbour's unsecured network.)

  • How can i get my iphone to automatically play music after watching a video or something that requires audio

    I Have a iphone 5 and was wondering if there is a way i can get my music to automatically play again after watching a video or something that requires audio

    Is the jack not fitting into the top of the iPhone?
    If so then you would need this adapter for it to fit properly.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=3DB 4EB78&fnode=home/shopiphone/iphone_accessories/cablesdocks&nplm=TN546LL/A

  • ITunes freezes with iPhone, when connected to network

    iTunes started to freeze with latest version (9), when iPhone is connected.
    I tryed everything from the Apple support page:
    http://support.apple.com/kb/ts1421
    The last sentence on that page is "Disconnect your computer from the Internet"
    iTunes is working well with iPhone, when network is disabled, but how I can fix it? What could be the problem?

    Hey Hoods ginest,
    Check out the following article, it'll go over how to sync your photos to your iPhone using iTunes:
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/ht4236
    You'll want to read the section titled "Syncing photos to devices" and then "To sync photos from a folder on your hard disk to your device."
    Take care,
    David

  • Can't get airport express to connect to internet after ISP changed my modem

    Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

    Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

  • IPhone won't connect to networks after 3.0 software upgrade

    Hi,
    It was always fine, but following the 3.0 software upgrade, it won't connect to networks. I've used the 'forgotten' function and inputted the details again - didn't work. I've also reset all network settings, then started from scratch. But I'm still getting the "unable to join networks" message.
    My friends are all having this problem after the 3.0 upgrade too.
    I'm in the UK, using a WPA2 connection. Nothing has changed about my network settings since upgrading the phone.
    Any help appreciated.

    You said that all your friends were having the same problem, implying that it might be general to the UK. I thought, and still do, that it was worth pointing out that it isn't general to the UK. Sorry you feel aggrieved by that.
    I mad a suggestion that might help. You haven't said whether you tried it or not. I assume you did and it didn't work. Sorry about that too.
    Try a restore. If that doesn't work for you or any of your friends, take the phones back and get replacements.

  • IPhone will connect to network but wont load any internet pages.

    OK, I have an iPhone (1.1.1) and an apple airport graphite base station which is connected to a D-Link G604T router.
    iPhone will connect to the airport but wont load any internet pages. My iBook works fine on the internet when connected to the airport.
    Any ideas?
    Thnanks.

    Daniel Langer,
    Make sure the graphite base station is configured as a bridge, and not assigning IP addresses itself if the D-Link is doing DHCP.
    If it is acting as a router, you will have NAT occurring twice, which can have a variety of issues.
    Hope this helps,
    Nathan C.

Maybe you are looking for