HTML and Flash colors don't match, need help...

Heya,
So if you visit
http://www.zachmarrow.com you
will notice (at least on Firefox and Safari on OS X) that the
colors in the .swf and the colors in my actual html document are
not the same. I haven't encountered this problem before so after
triple checking my hex numbers for the colors and so on I cannot
find a solution can someone please help!
.fla is located here:
http://www.zachmarrow.com/templates/wiuthl5s/flash/header.fla
The index file is located here:
http://www.zachmarrow.com/templates/wiuthl5s/index.php
Thanks!

http://www.adobeforums.com/webx/.59b52c9b/0
Peter Figen, "color management, printing with InDesign CS3" #1, 6 May 2008 7:45 am

Similar Messages

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Why i cannot update my new apple tv 3g and i cannot watch you yube need help

why i cannot update my new apple tv 3g and i cannot watch you yube, need help.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

I need help with my shockwave flash it is crashed i need help fixing

I need help with shockwave flash it is crash i need help fixing it

http://forums.adobe.com/thread/1195540

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

HT1937 I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks

I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks

wiliiam rrichard wrote:
Because My iphone is Locked on the United Kingdom
No it is not. iPhones, like all cell phones are not locked to countries. They are locked to carriers.
Only the carrier to whom the device is locked can unlock it. Contact the carrier.

HT201210 i can't restore my iphone4 from 5.1 to 6 and it stuck in recovery mode need help

i can't restore my iphone4 from IOS 5.12 to IOS 6 and it stuck in recovery mode need help please

Read here > http://support.apple.com/kb/HT1808
Hope that helps.

HTML and Flash

i have been searching for help on this issue and cant seem to find an answer. i am sure the issue is my lack of understanding.
Basically, i have a flash (CS3) program (lobby.fla) that contains a button to load another flash file (join.swf). i published the
lobby.fla program and created the lobby.html program and the AC_RunActiveContent.js. All program files are in the same directory.
if i run lobby.fla from Flash CS3 all works as i would expect. when i click on the join button, the join.swf is loaded.
if i run the lobby.html program from Dreamweaver, the join button does nothing (not even a trace statement is excuted).
Eventually I would like to pass parameters from the lobby program to the join program but i cant get the button to work.
if i just load the htl program in the browser this works. but when i run the lobby.html program from within dreamweaver the botton does
nothing. what am i missing in the dreamweaver side of this?
my environment is Windows XP Home, php-mysql, Dreamweaver and Flash CS3.
thanks for any help
teremoto

at this stage i would take a guess. i am at a loss.
from my understanding i have published the lobby.fla and i have gotten a lobby.swf, lobby.html and an AC_RunActiveContent.js files.
i have looked at the lobby.html and it seems to match with what i can find on the web searching forums for help and examples.
so i dont think it is that but it may be i need to add something but i am not sure. the AC_RunActiveContent.js file seems to be rather generic and
it does not look like something i should or would modify.
why would this work fine if i run this program outside of dreamweaver?
i thought it would be best to use html-ajax-php-mysql to handle logins and then let flash be the main program that the user will use.
maybe i am wrong in my design thinking. What i am trying to accomplish is to have a page presented (with links to join specific rooms).
the rooms will be a flash program (there is no required interaction between users who join the room...but i will need to pass a few pieces of
data back to the main calling program where i will need to update my database).
should my design be more where all links/buttons needed to move the user to the flash programs i want them to interact with be done outside
of flash? i was hoping to use flash to just pass the required parameters back to the lobby.html program and then process that data (update
my databases) . it just seemed easier to have a main driver program (my lobby flash program) to handle all the work as opposed to a whole bunch
of html pages.
i appreciate your opinion on this....i feel i maybe moving in the wrong direction in my development.
thanks
teremoto

Scriptable mail client with good support for html and flash

Hi,
on one hand I'm looking for the uzbl/luakit/.. equivalent in the mail client world: I want a very high level of control over how mails are fetched, filtered, displayed, scripts, keybinds, etc etc.
On the other hand I also want the client to handle html mails properly, even when they include html5 sound/video clips and/or flash widgets/videos.
This might sound ironic, but I use rss2email to get all my newsfeeds delivered to my mailbox. I think this makes a lot of sense, a centralized repository for all the messages I want to get.
But those newsposts often contain html5 and flash widgets, which I want to be able to use from inside the mailclient.
Also I expect usage of the xdg basedir spec and sane use of files (a simple text config file, and maximum a few binary files for caches/indexes etc)
A good search system based on sup/notmuch/xapian would also be welcome.
I just can't find a mail client like this. Any suggestions? Maybe anything that's close, so I could hack it a bit myself?
Claws-mail is the least sucky client I could find, but still it doesn't give me the advanced scriptability, it makes a mess in my homedir and doesn't support html5/flash.

Thid may take you a bit away from your current setup, but if you have used sup you shouldn't be too scared ;D
Ive started using mutt a while back, and if properly configured it can do a _lot_ of things and very well at that too!
Anyway, to answer your post:
1) Mutt can be configured to retieve your rss feeds, so you dont need to use rss2email and still get a centralilsed repo for your email and rss and, you will be able to keep your email account uncluttered with rss mail (but thats personal preference).
2) Intrinsically, like all CLI mail clients, butt doesnt show html/html5 or embedded flash in email. /BUT/ you can configure it to use a differen program to handle this automatically.
So, you will be able to get say uzbl, or jumanji or surf (if you're into your lightweight browsers) to open those multimedia emails. Edit: it seems you will probably have to use links2, but you may be able to use other clients (they will have to open as a seperate application though, whilst links2 is able to stay embedded. Maybe this can be done with the other browsers but I haven't tried nor researched this.
Generally as: (in .muttrc)
# enriched messages
auto_view text/html # view html automatically
alternative_order text/plain text/enriched text/html # but save it for last
Credit for that snippet goes to something i found on dotfiles. If I ever find the author's name, I shall edit it in here.
You will also need to create a .mailcap file with the relevant data. A basic google search reveals some good tutorials for this.
Last edited by GalacticArachnid (2010-12-03 02:01:42)

Colors don't match when printing pictures on J4860 all-in-one

When I print pictures, the colors are not true. It doesn't matter what software I use, but usually it's Photoshop CS3. I thought it was my monitor - that I wasn't seeing the true colors in my files. But I've been able to verify that the colors on screen match the subject in the photo. The prints from the HP J4860 do not match the screen images. I currently have new ink, and they are new HP cartridges, not generic or refilled cartridges, but this has been a problem through many ink cartridge replacements.

Hi there.
I don't know if there is much we can do to improve your output. First off, I want confirm you are using an OfficeJet J4680. We don't have a J4860.
Could you post an image that is unsatisfying, and let us know what you dislike? I'm going to involve a color expert here, and he'll look to see if we can do anything.
regards, CF
I work for HP and hope to make your day Sproutastic!

Lightroom exports to photoshop colors don't match.

I have been using lightroom for a while, but just recently started using photoshop. It doesn't matter what color profile I choose during export, red colors have less saturation in every case.
I'm sure there is something really simple I a missing, I would appreciate any help.
Thanks,
Mike

>I did set the I am using the manufactures color profile
Never use a manufacturer's profile. They are almost without fail corrupt and trip up Lightroom. You need to calibrate the screen with a hardware calibrator. Failing that the next best option is to software calibrate if you have Mac OS X, or use sRGB as the screen profile for windows by deleting the profile from the monitor's properties. This will almost certainly solve your problem. It is either this, or the dual monitor setup (see below)
>If I select Monitor RGB from the proof setup the results are terrible, I need to use the Custom setup, and uncheck "Preserve RGB numbers."
That's normal. That option is basically useless, what it does is show you what the image would look like if you wouldn;t color manage at all. i.e. if you send the RGB data from the file directly to the monitor. This should only work if you have a sRGB image for most monitors. When you uncheck "preserve RGB numbers" you are doing what is called soft proofing. However, since you're proofing to the monitor profile you will not seen any difference than without the softproof. You might try the softproof to the monitor profile (uncheck preserve RGB numbers) and set it to use perceptual rendering. This probably looks very much like what you see in Lightroom. Lightroom uses the perceptual rendering intent for your monitor profile.
>Interestingly, I noticed that the output appears to match when I use my laptops LCD, there is only a problem on my external monitor.
Here might be your problem too. Lightroom sometimes uses the wrong profile in dual monitor setups depending on what monitor you select as the main screen. Also, many windows machines do not deal correctly with different profiles for different screens. Be careful with dual screen setups if they are not the same type.

Songs and album covers don't match up?

On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
hope this helps, olly.

Colors Don't Match

When i print a color picture from iphoto or from Photoshop CS3 the colors dont match. Am i only supposed to use color lok paper? I'm using HP Premium Plus Glossy paper. My software is up to date and I did a verify and repair in the color sync utility. There are 136 profiles, it found 1 bad file that can't be fixed. Said the tag size is not correct, has a bad Macintosh string. What steps can I take to get the colors synced? I had a 6 year old photosmart 7620 before the envy, and someone on the forum suggested buying a new printer because of old and outdated color profiles. Any help would be appreciated.

Hi @Lommarti
Although HP does not support Photoshop, I was able to find something that might help; How to Convert RGB to CMYK in Photoshop.
If you can print from other programs without any issue, then you might consider contacting Adobe for help adjusting your color settings further.
You can also use the following document to ensure the printer is not at fault; Fixing Print Quality Problems for the HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One....
i hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Image Trace colors don't match selected color group. (Mac, CS6)

When I select the Document Library option when making a color image trace, the colors shift in the image but do not match the selected color group. I've tried multiple color groups, and the colors always change, but never match the selected swatches. Is this typical? Can anyone explain this?

After some additional experimentation, I discovered the problem was with images dragged from iPhoto and dropped into an illustrator file. When I placed the files instead, the colors matched the selected color group. After trying several other images using both methods, it appears as if dragging and dropping from iPhoto is a no-no when wanting to image trace and change the colors.

HTML and Flash colors don't match, need help...

Similar Messages

Maybe you are looking for