HTML and XML files open in same window(KM Navigation iView)

Hi All,
I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
Thanks & Regards,
Venkatesh R

Hi ,
check the below thread and try options mentioned in it
https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
Koti Reddy

Similar Messages

HTML Container - pdf-file opens a new window

I use the ITS Webservice PZ04.
There is included a html container who shows the pdf-file inside this area.
Now I have the effect, that this pdf-file will opena a new window, but not inside the html container!?
First action before I have had this effect was the MS question-alert 'How you will open this file' Open/Download/Cancel - you know. - it never done before -
What can I do to open my pdf-file inside the html container? It runs some times.
Thanks!

thank you for your answer, but it wasn't the solution.
I don't open the iView in a new window.
I open the iView (as IAC WebService via ITS) and the applacation generated a html container with pdf file!
And this pdf-file opens in a new window.
The Application runs up to now very good.
I think any value was changed and I don't know which.
It's possible the modification solved under MS or adobe!?
Solution: First Deinstallation and then Installation of Acrobate Reader.
Message was edited by: Ronald Kohn

XML Edit Form should open in Same window (Not a popup).

Hi all,
I have requirement to open the Edit form in Same window (Not a popup).
Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
Its possible? How to achieve this? Helpful replies will be appreciated.
Thanks and Regards
Thillai J

Not solved

How to open KM file in the same window

When we open KM file by /irj/go/km/docs/... link it is previewed in a new Internet Explorer window.
We changed Targed property to Self for iView navigation in LayoutSet render but the image file is still opend in new Window.
How to workaround this?

We changed Target Window Type property value of ResourceRenderer of Navigation iView to Self.
When an authenticated user tries to open KM file it is opened in the same window if file URL include /irj/servlet/prt/prtroot....
If file URL contain /irj/go/km/docs/.. it is opened in new window.
When an anonymous user tries to open KM file it is opened in a new (popup) window.
We need that anonymous user can open km files in the same window.
How to work around this?
We use light framework.

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

Menubuilder- Open in Same Window?

I have the advanced link setting for my links as "Open in
same window." The links continue to open in new windows. Is this
feature not desinged to launch the files in the same window as the
menu. Please help. Thanks.

Hi MissDona
I'm going to say "it depends". Normally, this is the default
behavior. But it likely will depend on the output type you are
creating. For example (and I'm somewhat assuming you fall into this
category) if you create .EXE output from MenuBuilder, a new
instance or window always opens, as MenuBuilder packages up the
Flash Player inside the .EXE. Thus, this version of the player runs
from a temporary location and has no clue about other movies and
whatnot.
Cheers... Rick

Hi I am using Iframe with src="abc.mht" file. i want to view the mht file content in same window.please help.. Thanks in Advance

Hi I am using Iframe with src="abc.mht" file. i want to view the mht file content in same window.please help..
Thanks in Advance

This is not a Java problem, this is a WEBBOT problem.
I suggest that you research the topic in your FrontPage help files.
Yes, we do know how to solve this problem using ordinary HTML and JSP. The sample code that you've posted implies that you are looking for an extremely different solution. To put it another way, it looks like you're logging onto the Federal Aviation Administration's forums and asking them how to go from Chicago to New York by train.
But in any case, if you can't find the information in FrontPage, I'm 100% certain that if you went to www.microsoft.com and searched for FrontPage and downloads, and skipped the results that actually want you to download FrontPage, you'll get some sample code.

Save as PDF, HTML and CHM file formats

Is FrameMaker capable of saving in all three of these formats: PDF, HTML and CHM file formats? Would InDesign be a better choice?

The first two, yes. For Compiled Help, the third, I'm sure you know that the files have to be compiled, so no, and I don't think the source files for compilation are a direct export either, unless you can follow an XML path. Although the popularity of CHM is way down from a number of years ago because HTML is more portable, but that's a different issue.
If I were you, I'd look at MIF2go, a Frame add on that does support export to all these formats, and a number of others.
InDesign doesn't do this either...
Just as a word of unasked for advice, choosing your authoring platform by what it can output is a back-asswords way to choose a tool. Find the tool that suits the way you create documents the best so you get more required features to create your stuff quicker and easier.
Both the tools you mention and most other modern ones do pretty open-ended output, either directly or through filters or conversion utilities... there are always ways to massage output to a different format. So output is certainly a consideration, but it's a relatively minor one.
As for input tools, you're comparing apples and oranges with FM and ID. FM excels at book style documents with multiple chapters or files that share common layout characteristics. InDesign excels at shorter documents that are usually design-driven, that require hands-on layout tweaking, and it can't do multiple file management.
Cheers,
Art

Forgot to backup itunes library.itl and xml files

I backup pretty much everything. Unfortunately I forgot about the itunes library datase files, the itubes library.itl and xml files. The hard drive has been repartioned and formated, so it's gone. I do have all the music in the exact same directory structure though. Both versions are Windows 7 x64. I aslo have my iPOD.
What I want to figure out how to do is import the database into a new install of itunes. So the music and stuff doesn't matter. It's all there in the same set of folders, with the exact same path as before. Is there any way to create the itl and xml files containing the metadata from the iPOD?
I wouldn't even be all that bummed if I had to let my music import from the hard drive again. I just really really want to import my playlists. That would really suck if I had to type them all in manually from the iPOD. If anyone could point me int he right direction, I would really appreciate it.

Ok googlers from the future, here is the sultion I used.
This solution puts everything back to normal with minimal work, but it costs you however much disk space is on your ipod. I downloaded the copytrans suite off the piratebay. Then I used the ipod copy to back up my ipod. This will copy things to folders based on tags. So you have to have a second copy of your music. Once it is backed up remote the itunes library files from the top folder of the itunes library. Start itunes, and then go to import playlist. Then you select the xml file from your ipod backup. This will import the entire library into itunes. When you sync your ipod it will say iit is going to delete everything and reload it, but it doesn't. If there was stuff that was no in the library it would delete it, but there won't be because the library came from your ipod to being with. So it just copies anything to it that wasn't there, if there is anything.
From that point, when you want to add stuff to your library/ipod, you have to put a copy of the music in the library you made. So all the music you want on your computer and your ipod will take up double space on your hard drive because you have to put a copy in the library folder. Once it is there, you just go to add folder and select your library folder. THis will make it rescan and put the new songs in the database.
The good part of this is you don't have to do selective ipod loading. You make the selection when you copy to the library folder. So at that point you just sync your ipod making an exact copy.
That was the best solution for me anyway, with a big library and lots of playlists. I also never use itunes. The sole purpose of having itunes is to load my ipod. My ipod I use daily though. I don't drive anywhere without it connected to my stereo. Being able to select anything in a massive music library from my head unit while driving around is seriously awesome.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

Textfield and XML file

Hi to EO,
i've a problem with a textfield who loads an xml file by its own attribute htmlText: the tag <img> within the file gives a flash player error:
text=Error #2035: URL Not Found.
Here's the content of the XML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8" />
<title>SynDesign: Contattaci</title>
</head>
<body>
<table>
    <tr>
        <td>
        <img SRC="http://www.syndesign.eu/flash/SITO/img/skyp.png"/></td>
        <td>
        Contatto Skype: perfect_nemus
        </td>
    </tr>
</table>
</body>
</html>
But if a open the same file with Firefox, everything wroks fine. Why?

You can use img tag in the text field directly:
myTextField.htmlText = '<img src="http://www.syndesign.eu/flash/SITO/img/skyp.png"></img>' but you are trying to load entire html.

Virus threat in my *.html and *.js files in website

when I open my website my antivirus found virs in it .
I checked it and i found all html and js files are corrupted . But all jsp and class files are working fine.
the virus is
<script language=javascript></script>I do not know how it comes and how it goes inserted in each html and .js files.
When I removed this code all things work fine but after 1 day the same old problem.
All files again went corrupeted again with that script code..
It is almost impossible to remove js and html files.
What wil I do now .
Please help me

Contact your hoster.

I fouled up; erased library .itl and .xml files; need a little help

I think I see what I did wrong (my issue relates to this reply post I submitted earlier today >> https://discussions.apple.com/message/16254985#16254985 but I don't think there's any need to go back and read that post to get the gist of my problem).
So, after knocking around and reading a whole bunch of forum posts and Apple support pubs, I now know I did something dumb.
Simply put, last night, in the course of attempting to delete from my MacBook Pro the iTunes library file residing there (the one designed to contain actual media files, i.e., music, books, podcasts, etc.), I also deleted the iTunes Library.itl and iTunes Library.xml files. Yes, doh! is right.
[BTW, the idea behind deleting the media library on the MBP was because my media files are -- and have been for some time -- located on an external hard drive. So the good news is I still have all my media. Of course, the bad news is I lost all playlists and a host of song-specific information and I'm sure a bunch of other stuff that is organized on the iTunes Library.itl file. (Apple's helpful info sheet on the .itl and .xml files at >> http://support.apple.com/kb/HT1660)]
So I opened up iTunes today and there is nothing there, i.e., looks like just opened for the first time ever. I now know that in the absence of the .itl and .xml files (which I trashed yesterday), iTunes went ahead and created new, empty versions of these files.
HERE'S THE QUESTION: what should or can i do now to rebuild my library? My media files still reside on my external HD and there they must stay because there isn't remotely enough room on the MBP hard drive itself.
I'm just sort of stumped. And skittish. I don't want to make another dumb mistake that will make things even worse. Any ideas?

Hey, sorry to hear that, but good to know that you have all your "stuff" and its just a matter of getting it all back together in the right place. So, I have some ideas why it happened to me and maybe why this happened to you, which may be relevant later, but first I'll first explain how I got out of this jam.
After much investigating, I finally did a search for .itl files and ended up "finding" one in the Media folder itself, specifically in the Music folder (yeah, should have done this much earlier). Looking around, I also found the other files and folders that are supposed to be at same directory level as "iTunes Media."
At this point, I just moved them back to where they were supposed to be and opened iTunes and, voila, there was my stuff (albeit not quite all of it or exactly as it should be). Then, after making sure my Media folder was properly identified in Advanced Preferences, I checked the boxes under File -> Library -> Organize Library and iTunes started doing some activity that seemed like it was reorganizing or rechecking the organization (you can see I am no expert here).
So like I indicated, it wasn't exactly the way it was when I last used iTunes before I had the problems (e.g., various podcasts, books, etc. werent there -- so i just added them into the Library manually, i.e., File -> Add To Library, etc.).
Anyway, I hope this helps if you haven't already fixed your problem. If not, I might have some other ideas I came across while still searching for solution to my problem. Best of luck.

Have itl and xml files on external hd am running home premium. can no longer access files, am told this is because they were created with a newer version of itunes. also when i try to download 10.3 it wont, just says invalid drive j and for me to try aga

i am running vista home premium on desktop and vista basic on laptop. have placed my itunes music with .itl and .xml files onto external drive connected to another desktop running vista and can no longer access music on first two mentioned comps only on the one connected to external drive. always am told that the library cant be read because it was created using a newer version of itunes. have tried to download 10.3 but it always tells me that i have and invalid hard drive j and to try again. any ideas?

Older versions of iTunes cannot read libraries created with newer versions of iTunes. You need to have the same version of iTunes on all your PCs. Is that the case?
As far as the problem installing iTunes goes, see this article from b noir on dealing with the problem:
https://discussions.apple.com/thread/2450004
If you get to the point where you need the Microsoft Installer cleanup utility, you will need more help as it has been withdrawn by Microsoft. but I am hoping the virtual drive trick will work,

.HTML and .DWT files in folders have 0kb size

Hey guys,
I was just setting up a new client on the system and I have an issue with uploading HTML and DWT files through Dreamweaver. The files end up on the server but each is a 0kb file. Here are my steps:
In Partner Portal I created a new site
I chose to start with a blank slate/template
I logged in via Dreamweaver CS5's BC Extension as I normally do and set the local directory of the project
I was moving a static HTML site over to this site so the design and files were done already. So once the project was setup in DW I selected all the files in the project folder and uploaded them to the remote site via the Files panel in DW.
The upload completed and did not note any errors or problems.
I logged into the BC Admin and went to update some URLs of the pages and I noticed the first .html file in a folder had 0kb.
I noticed that this problem only occurred in files that are uploaded to a folder. IE- I had a folder called "contact" and a file index.html inside. I uploaded this folder and the rest via the Files panel in DW. I DID NOT create the folders through BC first. The same thing happens with .DWT files too. Although, in this case, since I had a "Templates" directory locally and I'm assuming one was created by BC on the remote host when I created the account it's probably not having to do with users creating folders through FTP/Files panel in DW.
The .html files in the root of the site are fine. All my JS and CSS files in their folders are also fine. It just seems to be .HTML and .DWT files in folders that have 0kb.
Has anyone seen this?
I have to get this site live in a rush tomorrow so I'm either going to delete the folders via FTP and create all the pages/folder first in BC and copy and paste the code over from DW to BC Admin area manually. I'm not excited about doing that as it will add hours onto this site when moving a static site over should be pretty quick. Now I have to create all the pages and templates manually.

I can now confirm that the problem is related to DW or the DW FTP login session. I used WinSCP to FTP my files up and they went up fine.

HTML and XML files open in same window(KM Navigation iView)

Similar Messages

Maybe you are looking for