HTML code corrupted by DW CS4

CS4 is appending bits and pieces of HTML code to the end of my webpages without rhyme or reason.
Removing the errant code appears to work in code view. BUT AFTER SAVING THE FILE IT REAPPEARS.
I have tried deleting the start up folder in the documents and settings > Adobe > Dreamweaver and restarting the program.
In the past this worked - but not today.
Code is still being appended to the end of my pages and it can not be deleted using Dreamweaver.
Is there a hot fix or patch coming soon to address this problem?
Regards,
Gaver P
</td></tr></table></td></tr></table>
<DIV id=footer> © 2009 TSi - Tropic Signs Incorporated</DIV>
</BODY></HTML>
L> <-- added by program and unable to delete!!!

Murry,
Thanks for the reply...
Unfortuanately for me, it DOES add code, as referenced in my snippet above. the "L>" was added by Dreamweaver.
I can load the page in DW.
I can delete the "L>" and save the page.
I can close the page.
I can re-open the page and...
There it is again, the "L>" is back in the page.
I can also open the same page using CF Studio.
I can delete the "L>" using Studio.
I can save the page and
When I load and view it - the "L>" is gone.
DW CS4 is corrupting the HTML of my webpages.
I know (from previous experience with Adobe Tech Support) there's a fix, but I don't recall which Registry Key needs to be deleted?
Any one know which key needs to be deleted?
Or.. .if there's a hot fix or patch for DW CS4 that will fix the problem once and for all?
G

Similar Messages

Adding HTML code corrupts (and destroys) site

I was informed by Apple support that iWeb does not support adding HTML to your page (even though I did so in the Forms widget), and that the code corrupted my page (causing all kinds of font issues, blurry images, and wacky layout errors). They said I would have to rebuild the page from scratch (I have already spent hours building an intensive website that is now useless). I am skeptical that all these iWeb problems (font changes, wrong colors, layout chaos, blurry fonts, etc.) are caused by HTML code, so if anyone has any more info I would appreciate it. I am ready to throw iWeb in the garbage and go back to Dreamweaver MX!!! Thanks.

not totally comfortable posting links to the site (its a business site and not mine)... if you search around for iWeb problems you will find many people having the same issues... when i tried fixing my original page (after deleting the page with the problematic code) the problems still occurred... when i redid the page completely the problems stopped happening (at least for now)... I was told by the Applecare person that the code had completely infested/corrupted the entire site and that it could not be fixed... that I would have to completely recreate the site again... what doesn't make sense is that such a glaring, fundamental problem on such a basic program goes ignored by such a powerful, inventive, flourishing company... disappointing to see all the issues/bugs that get officially ignored on these forums...

Corrupt chunk encoding, corrupt html code

We had corrupt chunk encoding on longish webpages (HTTP 1.1, HTTPS, HTML Code >2MB) and finally found out that the load balancer F5 from BIG-IP had a problem with HTTPS encoding .. updated the thing .. problem solved.
Hope this helps.

Can you please share the solution? What did you need to update in the load balancer?

HTML code appears corrupted - anyone run into this problem?

Using RH8 HTML - All of my topics have unusual spacing in the html code. This happens with a brand new project - starting right from the menu to select a new project. As soon as the project is created I go into the first topic and look at the html code and it looks something like this:
OK, even though it's hard to read, you can get the jist of it. This happens with old or new projects.
I am hoping I do not have to have our IT staff perform a uninstall/install. Any feedback is greatly appreciate.
Rob

Just want to add that the usual trick of restoring the default font to Courier at 100% does not work as the dropdown is blank when Robert accesses it.
Also this applies to any project Robert opens, including the samples.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why does Contribute generate extraneous HTML code?

Why does Contribute CS4 generate so much extraneous HTML code that is either redundant or conflicts with styles specified in our style sheet? Below are examples of what we've encountered in the first two weeks of using the product. It seems that, if we keep using Contribute, our website will soon be cluttered with junk code. (Some of the special characters listed below and generated by Contribute do not display correctly in this forum.)
1. This simple Heading 1 tag: <h1>Heading 1</h1>
gets replaced with this code:
Heading 1 
2. This simple Heading 2 tag: <h2>Heading 2</h2>
gets replaced with this code:
Heading 2
3. This simple Paragraph tag: Text
gets replaced with this code:
 TextText
4. The standard straight quote symbol (") gets replaced with left and right quotes (“) (”)
5. Apostrophe’s get replaced with “’”.
6. Odd, non-visible (in some browsers) characters are inserted, like: “Â”.
7. Dashes get replaced with these special characters, which may not display in all browsers: “â€””.
8. This non-standard style tag gets inserted at the top of some pages:

</style>
9. Trademarks, which are reliably denoted with just ”™”, get replaced with this code and these special characters, which may not display in all browsers: “â„¢”.
10. The simple Heading 1 tag: : <h1>Heading 1</h1>
gets overridden with this code:
<h1>Heading 1</h1>
11. This simple Paragraph tag: Text
has the inappropriate “ServNAV” navigation style applied to it:
Text
12. This simple Paragraph tag: Text
gets replaced with this code:
Text
13. Extra filler space gets inserted at the bottom of a page with this code:
 
14. Internal links are created as absolute (<a href="http://www.company.com/subfolder/Client-One.html">) rather than relative links ()<a href="../subfolder/Client-One.html">.
15. Links to other sites are coded incorrectly,
as in “<a href="www.company.com">www.company.com</a>”
instead of: “<a href="http://www.company.com">www.company.com</a>”.
16. This simple bold Paragraph tag: About Company
gets replaced with this
About Company
17. This simple Paragraph tag: Text
gets replaced with this code:
Text
Message was edited by: JerryWeb

I've just written a detailed list of editing tips for our internal use that, in addtion to using "Paste Text Only", describe how to avoid or re-key Microsoft Office curly quotes and apostrophes, use only Contribute's Insert | Special Characters, etc.
In addition, I created a new role in which I made the following changes:
Under Editing, under“General editing restrictions”, checked the “Prevent users from inserting images (except shared assets); under “Paragraph spacing, changed so “Enter key moves insertion point down:” “Two lines, as in web page editors (uses standard tags”; under “Other editing options”, unchecked “Allow multiple consecutive spaces”
Under Styles and Fonts, under “Styles and Fonts”, unchecked “Include CSS styles in the Style menu; unchecked “Allow users to apply fonts and sizes”; and unchecked “Allow users to apply font color and background color”.
Under New Pages, unchecked “Create a blank page”
Our initial experimentation indicates this eliminates most of the extraneous and junk HTML code that Contribute otherwise introduces. Time will tell. However, it requires contributors to be pretty rigorous.

HTML code issues

I have a topic that was once stable
, but now at one point in the top
ic the style is correct. But in another area, the style will not take and the HTM
L code inserts etc., etc. Here is an example if you look at the H
2 head:
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="template" content="NERC.htt" />
<meta name="generator" content="Adobe RoboHelp 8" />
<title>Revoking PI User Access</title>
<link rel="StyleSheet" href="..\default.css" type="text/css" />
</head>
<body>
<?rh-script_start ?><script src="../ehlpdhtm.js" type="text/javascript"
 language="JavaScript1.2"></script><?rh-script_end ?>
<?rh-placeholder type="header" ?>
<h1>Revoking PI User Access</h1>
Access for both a PI user and a SCADAView user can be revoked if a Mantis
ticket requesting removal from IT AccessRequest exists. For Mantis tickets,
make sure that a Real Time Systems User ID Add-Changed-Remove
form completed by the user’s E4 manager is attached to the ticket. If
not, contact the requestor.
In order to remove access, you must search for the user name in both
the old and new databases:
<ul type="disc">
<li class="BulletedList">For instructions on revoking a user's access
in the old database, <a href="#Removing_Access_Old_DB">click here</a>.</li>
<li class="BulletedList">For instructions on revoking a user's access
in the new Active Directory database, <a href="#Removing_Access_New_DB">click
here</a>.</li>
</ul>
After revoking a PI user's access, you also need to remove the user's
name from the Outlook Address Book. For instructions, <a href="#Removing_User_Outlook_Group">click
here.</a>
<h2>Removing a user's access in the old database<a name="Removing_Access_Old_DB"></a></h2>
<ol>
<li class="NumberedList">Go to the SCADA
website at <a href="http://scada/" style="font-size: 10pt;">HTTP://SCADA</a>.</li>
<li class="NumberedList">When the SCADA &
Distribution Automation home page displays, under PI
Historian, click User Maintenance
(circled in red). <a class="dropspot" href="javascript:TextPopup(this)"
 id="a5">Click to view</a>.
<div class="droptext" id="POPUP134020538" style="display: none;">
<img src="../PI_Historian.jpg" alt="" style="border-left-style: Solid;
 border-left-width: 2px; border-right-style: Solid; border-right-width: 2px;
 border-top-style: Solid; border-top-width: 2px; border-bottom-style: Solid;
 border-bottom-width: 2px;" width="194" height="109" border="2" />
</div></li>
<li class="NumberedList">When the SCADA System Logon screen displays,
perform the following:</li>
</ol>
<ol start="1">
<li class="NumberedList2">For User Id,
enter your PI user id.</li>
<li class="NumberedList2">For Password,enter
your PI password.</li>
<li class="NumberedList2">For Select Group,
click PRG from the dropdown list.</li>
<li class="NumberedList2">Click <img src="../ButtonSubmit.JPG" alt=""
 style="border: none;" width="61"
 height="25" border="0" />.</li>
</ol>
 Result: The User Administration screen displays the user's information. <a class="dropspot"
href="javascript:TextPopup(this)" id="a2">Click to view</a>.
<div class="droptext" id="POPUP133400192" style="display: none;">
<img src="../UAdminKUSBJX.jpg" alt="" style="border: none;" width="456"
 height="368" border="0" />
</div>
<ol start="4" type="1">
<li class="NumberedList">If the user id
is recognized, but PI access must be removed while keeping SCADAView.</li>
<li class="NumberedList">If the user id is recognized, but PI access
must be removed while keeping SCADAView
access, uncheck the PI Access checkbox and click
<img src="../ButtonModify.JPG" alt="" style="border: none;"
 width="63" height="25" border="0" />. </li>
</ol>
 Result:  If
the PI-only access removal is successful you should see this message (circled
in red).
<ul type="disc">
<ol start="6" type="1">
<li class="NumberedList"> </li>
<li class="NumberedList">If both SCADAView and PI Access must be
 removed, click <img src="../ButtonDelete.JPG" alt="" style="border: none;"
 width="63" height="24" border="0" />.</li>
 Result: If both SCADAView and PI access removal is successful
 you should see the following message (circled in red). <a class="dropspot"
 href="javascript:TextPopup(this)" id="a4">Click to view.</a>
<div class="droptext" id="POPUP133037650" style="display: none;">
 <img src="../UAdminDeleted.jpg" alt="" style="border: none;"
 width="466" height="409" border="0" />
</div>
 NOTE:
  The User ID is the person’s
 LAN user id. This removes the user id from the GLOBE_USER table.
<h2>Removing a user's access
 in the new database (Windows Active Directory)<a name="Removing_Access_New_DB"></a></h2>
<ol type="1">
 <li class="NumberedList">Remote
 desktop to either server: cccs-pifig01
 or lc3s-pifig01.</li>
 <li class="NumberedList">Double-click
 the Energy PI Users Group.</li>
 <li class="NumberedList">When
 the Energy PI Users Properties
 dialog displays,
 select the Members
 tab. See below.</li>
</ol>
<img
 src="../Remove_NewDB.jpg" alt="" style="border: none;" width="963"
 height="642" border="0" />
<ol start="4" type="1">
 <li class="NumberedList">Select
 the LAN user name on the screen and click <img src="../ButtonRemove.jpg"
 alt="" style="border: none;"
 width="75"
 height="24"
 border="0" />.
 </li>
</ol>
 Result: The user is removed
 from the PI access Active Directory user database.
<h2>Removing a user's name from
 Outlook<a name="Removing_User_Outlook_Group"></a> </h2>
This
 procedure involves removing the newly deleted user from the T&D PI Users
 group in the Outlook Address Book.
<ol start="1" type="1">
 <li class="NumberedList">Open
 the address book in Outlook.</li>
 <li class="NumberedList">Locate
 and delete the user’s name from the T&D
 PI Users group.</li>
 <li class="NumberedList">Complete
 the Mantis ticket.</li>
 <li class="NumberedList">If
 the user is on the Terminated Employees list, enter the employee’s
 user id in the PI Access column and highlight the entire row
 with an orange background color.</li>
</ol>
 
<?rh-placeholder type="footer" ?>
</ol>
</ul>
<?rh-placeholder type="footer" ?>
<?rh-script_start ?><script type="text/javascript" language="JavaScript1.2">//<![CDATA[
if( typeof( TextPopupInit ) != 'function' ) TextPopupInit = new Function();
TextPopupInit('a5', 'POPUP134020538');
TextPopupInit('a2', 'POPUP133400192');
TextPopupInit('a4', 'POPUP133037650');
//]]></script><?rh-script_end ?>
</body>
</html>
I am exhausted from deleting specific HTML code to make the content work. Plus there seems to be an issue with the margins moving around. Can someone help me with this HTLM code nightmare? Other than deleting it all and inputting the text again? This is the only topic in my project in which this has occurred.

Hi Gloria,
 Its not possible to talk about a solution until you know the issue which caused it. the question is the HTML cannot get reorganize in RoboHelp if it is not edited exclusively - by this I mean if you bring in all the content through RoboHelp UI then RoboHelp will not change HTML by itself, until you manually change the html code.
you should try to find out the cause of the seizure (by which I think you mean hang), It could be that you are using any version control and it failed to checkout/checkin one or more project files, It might be that .cpd file got corrupted in that case you can try deleting the .cpd file after closing the project and it will get recreated by RoboHelp on next Open project, or it is possible that some of your shared resources might be missing/moved because of which RoboHelp hangs then in such case you should replace/remove these resources.
You should not be working on the project over network (i.e. the Project should be on the local drive).
Are you using CBTs and UDVs or your topics are too large (and thus processing of these topics seizes RoboHelp)
by any means deleting random HTML code of any topic might actually make the HTML invalid and cause more crashes or hangs.
I have listed down almost all the reason..
one way is to remove topics and find out the culprit topics which causes the hang and if you find one you can share it with me at [email protected] and I might find the cause of RH hang by inspecting that
Hope this helps
Ashish

Inserting html code snippets

I'm using Contribute 3 (version 3.11) and cannot insert html code snippets with this. But I'm rather confused as to what I need to upgrade to to do this.
On the Adobe Help Center webpage it states that " Advanced Adobe Contribute users can use Adobe Contribute CS3 to add custom HTML code snippets to Contribute pages".
So what is the difference between my version Contribute 3 and Contribute CS3? And I know that there is now CS4 also, so assume that would be even better?
I've spent quite a bit of time on the net trying to get to the bottom of this, and hope that someone will take pity on me and enlighten me!
Thanks in advance.

Joe, I'm told it should be in the Insert drop down menu if it has been enabled by the Administrator. Is there someone else involved with your site who could have disabled this function? I know that similar things have happened to me in the past.
Anyway ... I have some good news to report. I downloaded the free trial of Contribute CS4 from the Adobe website yesterday. It took over an hour to download and I wasn't very optimistic that I would be able to get it to work but I did. There is indeed an "Insert html snippet" function and I have produced a test page with a booking engine on it as a result of inserting some code. I have not yet tested it with audio and video files. I will have the use of the free trial for 30 days so will be able to carry out some more tests before taking the plunge and upgrading.
If you have the minimum system requirements I would say it is worth your giving this a try, Joe

How to see html code in a php file using CS5.5 without using testing server?

In CS5.5 when I open a page with php extention, DW does not show any html code in design view without me having to set up a testing server. In DW 8 it would open the same files and show me the html in design view. I have no need to test php code, I just need to alter the html. Is there a setting I can change to enable this in CS5.5? Thanks.

Below is the code. I discovered that if I create a new php document not from
a template, then I can see the html elements in design view. If I create a
new page from a template and save it as html, design view still works, but
if I save a new page from template and save it as php, I only see symbols
for php and nothing else in design view.
Thanks for your help on this.
</div>
</div>
SSL
COT("images/cot.gif", "SC2", "none");
</html

I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

Hi,
This feature is not available in Adobe Edge animate. You can not export as image from Edge animate.
Publish options available in edge describe here
Edge Animate Help | Publish your content
Regards,
Devendra

How do i add html code to my muse site? I want pintrest to verify my site.

how do i add html code to my muse site? I want pintrest to verify my site.

Hi,
There are multiple ways in which you can add the HTML code to your site. Few methods are :-
1) Copy your HTML code, In Muse -> Select Objects-> Insert HTML . Paste your HTML code on the page. Please reer to this screenshot :- http://prntscr.com/52vprn
2) If you want to add the HTML code in the Head section of your page, Go to Page Properties-> Metadata-> HTML for <Head> . Please refer to this screenshot :- http://prntscr.com/52vpx5
Hope this helps
Regards,
Rohit Nair

Need HTML code to call template from an existing web template

Hi all,
Can someone help me with a HTML code which can call another web template from a field of a table.
I have a web template which includes table as web item.The template when executed displays the data of query view in the form of table.One of the field in the table is Europe.Now my requirement is when i click on that field Europe,it should open up another template which is present in the system.
Please provide me with a HTML code which can do this.
Regards,
Suchitra

Hi all,
Can someone help me with a HTML code which can call another web template from a field of a table.
I have a web template which includes table as web item.The template when executed displays the data of query view in the form of table.One of the field in the table is Europe.Now my requirement is when i click on that field Europe,it should open up another template which is present in the system.
Please provide me with a HTML code which can do this.
Regards,
Suchitra

What html code will start an EXE (program) with a click on a webpage link?

The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">

</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
 <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center">
 This Software Allows You To Review Neat Charts of Your Family Tree </div></td>
 <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html">Back</a></div></td>
</tr>
</table> <center>
 
Click the link below to download a special software program for your PC. 
 
<a href="http://jdmcox.com/">Cox Website</a> 
ITEM 1 (AT THIS WEBSITE) IS THE FAMILY TREE CHART PROGRAM. 
It is called Simple Family Tree 
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
 <td width="49%" align="left" valign="top">Click the link below to use this special software program after you download and install the program. 
 

<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe">Family Tree Charts Program</a> 
Click the "run" button for both warning messages. 
Click the "READ THIS!" menu option when the program opens. 
Click "X" in the upper right to close the program. 
You can update the family data in future years with this program too.
 </td>
 <td width="51%" align="left" valign="top">NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: 
 "c:\program files (x86)\simple family tree\simple family tree.exe" 
 The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me. 
 NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</td>
</tr>
</table>
 </center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
 <tr>
 <td bgcolor="#EFEFEF"> ©2002 Sales and People</td>
 </tr>
</table></body>
</html>

Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom

function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents. Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
 Re: What html code will start an EXE (program) with a click on a webpage link?
 created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Using webmail in Mozilla Firefox 17.0.1 on Windows 8, original messages get turned into html code when I reply to or forward them. How can I fix this?

I have tried re-setting Firefox and working in Safe Mode, but the problem still recurs. I use Fastmail as my webmail server and never had this problem on Windows XP or Windows 7. When I reply to a message, the original message is turned into html code. The same happens when I forward a message.
My JavaScript is up to date, in case that's relevant. The Fastmail support team suggested the problem would be Firefox-related.
The other function of my Fastmail account that isn't working properly in Firefox 17.0.1. is the search function.
Do I need to get new plugins or something? I don't know where the HTML editor is in Firefox or if that's what's wrong.
Regards,
Rachel

Thanks for your reply, cor-el. Norton 360 came pre-installed on the laptop as part of the package I bought. I haven't changed the pre-set firewall or anti-virus settings. Should I change something?
I will try rebooting in Windows Safe mode as you say and report if that makes any difference.
Rachel

PDF and column HTML code

My report table include column with HTML format such as
<a target="_blank" href="tableA.url">tableA.url</a>
It works fine in dashbaord: I see the URL and when click on it, I got the URL in new window.
When I export to PDF, the resulting PDF display the HTML code and not just the URL.
Any ideas?

user8257465 wrote:
Hi,
I tried to achieve this before without success. My conclussion was that the pdf converssion engine that OBIEE uses is not able to generate HTML code inside the pdf.
Me too I will like to know if someone achieved this.
Thanks,Unfortunately, your assessment is correct: when printing to pdf, the HTML codes are exposed rather than maintaining the functionality of the coding.

Web Intelligence: Save Report as PDF and with embedded HTML code

Hi all.
Sorry but I'm not able to find any post about this matter, please feel free to provide links if you know existing topics about this problem.
We created a beautiful report with HTML5 code embedded into a blank cell and we are now trying to export it in a printable format (e.g.: PDF or HTML).
As you know (as per manual information) it is not possible to export a report with embedded HTML code and keeping it in the output (cell with embedded HTML code is rendered blank).
My question is: is there a known workaround or an alternative solution to export the report and keep its content?
Print screen is not a valid option :-P
Thanks for the support or any suggestions
Stecas

Product limitation; vote for change on ideaplace, etc. I don't believe there is an *easy* workaround, but see:
https://scn.sap.com/thread/3149287
HTH
NMG

HTML code corrupted by DW CS4

Similar Messages

Maybe you are looking for