HTML code does not display correctly

Hi
this is a common problem of mine - when i paste code into
dreamweaver it stays code - it doesn't translate into the thing its
suppposed to be . In this particular case, i'm trying to paste code
in from youtube and its supposed to be an audio/visual viewer. but
its code. I also pasted in a link from youtube and thats code too,
any ideas?
thanks
patti

This gives workarounds, and links to an extension that will
restore a "paste
as html" menu choice under Edit menu.
See
http://www.adobe.com/go/8d3c7fb0
http://kb.adobe.com/support/dreamweaver/ts/documents/8d3c7fb0/CopyPasteHtml.
mxp
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

Oops - spry menu bar 2.0 does not display correctly when loaded

Oops - obviously I'm new at this. I think I got my graphics loaded now.
Dear Sirs:
I notice bzz31 had a pretty complicated post, so perhaps someone can help me with my complicated problem that has been vexing me for months. I tried the Spry Menu Bar 1.0, but it was impossible for me to edit, and I was delighted to see Spry Menu Bar 2.0 come out. However the 2.0 version has been frustrating me as well.
I can get my menu bar to display properly in Live View, as shown below.
However when I load everything onto the server, the menu bar does not display correctly, as shown below:
I don't quite understand the code "file:///" but I interpret it to mean that the Spry-UI-1.7 folder is in the topmost folder of MacPro5-Docs, which is my hard drive. Here's the code I'm having trouble with:
Here's my computer directory, shown below:
Since my index file is two folders down from Spry-UI-1.7, I loaded the files onto the server similarly, as shown in the next three pictures:
(The picture below is the same as the one just above, but now you can see the path from index to Spry-UI-1.7.)
I would be most appreciative if someone can help me.
Thank you.

Have a look at the following links
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<link href="file:///MacProG5-Docs/Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
Each of the above points to a file on your local system and cannot be found by the remote server.
Replace the red coloured parts with http://www.twhsbands.org/ will remedy the situation.
You also have some remnants of the other SpryMenuBar that should be removed from your markup.
Gramps
Wel, so much for the red coloured parts, they did not show up.
The red coloured parts read file:///MacProG5-Docs/

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Dragging and dropping an item within horizontalList does not display correctly

It appears that when I drag an item from a HorizontalList to another location within the same HorizonList, it does not display the images correctly. In my HorizontalList, I have an itemRenderer that shows the thumbnail image of the item. I have about half a dozen items in the list and when I drag the sixth item and move to the beginning of the list, the display looks as if the first and the sixth element are switched, while in reality the resulting dataProvider array seems to have the right order, meaning the sixth element became the first element and the first element became the second element and so on. Has any one seen such a behavior and how do I rectify this? Thanks in advance. Cheers, Ramesh
The HorizontalList def is
<mx:HorizontalList id="myList" width="92%" height="100%" columnWidth="90" rowHeight="105" rollOverColor="#f26722"
                    itemRenderer="com.myListRenderer" labelField="name" dataProvider="{arr}" columnCount="10"
                    click="updateView(event)" dragEnabled="true" dropEnabled="true" dragMoveEnabled="true" >
</mx:HorizontalList>
The renderer code is
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" horizontalScrollPolicy="off" verticalScrollPolicy="off" horizontalAlign="center"
        verticalAlign="middle" width="90" height="90" verticalGap="0" creationComplete="init()" >
<mx:Script>
    <![CDATA[
        private function init():void {
            imageFile.source = data.url;
            imageName.text = data.name;
    ]]>
</mx:Script>
    <mx:Image id="imageFile" scaleContent="true" width="90" height="70" horizontalAlign="center" verticalAlign="middle"/>
    <mx:Label id="imageName" height="18" width="90" textAlign="left"/>
</mx:VBox>

Hi Alex,
In your blogpost on itemRenderers, you discussed something relevant in a brief section on "Background color changes when data changes". However, I could not find any reference for use on dataChange event handler. Can you pelase point me to the right article?
Implementing dataChange event instead of creationComplete did not solve my issue. I still had the issue. Thanks, Ramesh

MB56 does not display correct information

Hello,
All 3 plants, use transaction MB56 for traceability. This shows the components that used to manufacture the product and also where the product was shipped, depending on whether you select top/down or bottom/up. I have found an error in the transaction. When you execute for Bottom up to see where the product was shipped, the information is not correct.
The number of pcs is correct for the total amount shipped, but it does not display all of the deliveries that the product was shipped on. Please see the attachment for details of one example. I have executed this for 4 different materials and I have the same problem everytime.
Could you tell me what went wrong?
Thanks
JJ

Hi John,
MB56 will not display data because there is pre-requisite of it.
You must have to compile the inventory documents by MB57 first.
Only you need to execute MB57 t.code.
Specify from & to date & execute it. (It will take some minutes).
Then check it by MB56. You will find traceability.

Iweb updated page does not display correctly in firefox or safari

www.rohanstevenson.com
tried to update my site with a couple of cues and the wheels have completely come off. i cannot get the site to display correctly.
it looks a bit better if i open the page directly from the computer, but after sending it to ftp host it will not load up properly in the browsers.
i have no idea what is going on and i rather desperately need that site back up and running
help!!

This is happening probably because the text encoding on your server end is set wrong. Or perhaps your FTP program is doing the encoding differently. This is commonlly seen when uploading iWeb pages to 3rd party servers and can be corrected.
Our own Tom Gewecke has a nice writeup about these strange looking characters that can appear. He also has some suggestions about what to check and what to do. Check it out and see if any of it might be relevant to your situation. If not come on back and we'll keep trying to troubleshoot with you...
http://homepage.mac.com/thgewecke/iwebchars.html
Good luck!

Mac mini minidvi to hdmi does not display correctly new Panasonic TC-L37D2

Hi,
I have the 2009 mac mini (2.2GHz cor 2 duo nvidia 9400 256mb) and I recently purchased the Panasonic TC-L37D2 LED LCD tv. I use the mini dvi to dvi adapter with a belkin dvi to hdmi cable I purchased at the apple store to connect the mac mini to the tv. I cant seem to get the display to correctly fill the screen. When I select 1080P the top menu bar is out of view. Basically the desktop is larger than what is displayed on the screen making navigation difficult. I tried overscan but my screen then has black bars framing the entire desktop. Are there any updated display drivers I can try to fix this. I tried the third party software switchresx but I was only able to correct the vertical issue and not the horizontal issue (so the apple pulldown in the upper left corner is off of the screen). Why is it such a hassle to get this working? My buddy has a 42 inch Panasonic plasma and does not have any problems. Anyone know the correct switch resX settings at least? I see that Apple has added an hdmi port to the new mac minis but that just means I should have waited to buy mine. :/

Read my post in Mac Mini to HDTV. A 3rd party utility called DisplayConfigX will allow you to create a custom resolution that will resize the Mac DVI/HDMI output to fit.
It is annoying when that top menu bar is off the screen huh?

JSP / HTML page does not load correctly in IE

I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]

Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam.

Book Title in Navigation Bar Does Not Display Correctly

Hi,
I tried creating a epub file following Epub Best Practices ebook but after creation and loading of the ebook, I noticed that the book title at the navigation bar is not appearing correctly. The only the upper half of the text is shown so it appears that the text is cut in half. What should I do to correct this?
Thanks,
-- Jeff

It seems that ADE is having errors displaying the book title when it has a non-breaking space. The book title in the previous post contains an non-breaking space. And when I replaced it with a regular space, the display was fixed. See link for the screen grab:
http://picasaweb.google.com/lh/photo/WIRjcDpEJSGOIur7FEBvzg?authkey=U6NN0HOA9dw&feat=direc tlink
Aside from non-breaking spaces, what other characters does ADE does not support (which displays the title incorrectly)?
-- Jeff

CS4 GUI does not display correctly

I'm using the trial version of Dreamweaver CS4 on a Thinkpad
T60 with XP Pro SP3. My monitor is 1280 x 1024 and the fonts size
is set to Large (which may be the source of this problem.)
When I am using Dreamweaver, the window at the bottom of the
screen, the one with a tab labeled Properties, does no fully
display. The second line of data entry boxes, the ones labeled ID
and Link are partially cut off. There does not seem to be any way
to increase the size of that window and I also don't know if there
are more than 2 lines.
Is this a font size issue? is there any fix, other than using
normal size fonts?

Adobe applications unfortunately do not adhere to OS UI
standards.
Al Sparber - PVII
http://www.projectseven.com
The Finest Dreamweaver Menus | Galleries | Widgets
http://www.projectseven.com/go/pop
The Ultimate DW Menu System
"vicroberts" <[email protected]> wrote in
message
news:gjoe9i$7vc$[email protected]..
>I did not mention in my original post that I'm using an
external monitor
>with
> the Thinkpad.
>
> I can confirm now that the problem I discuss in my
original post
> disappears if
> I switch to Normal fonts instead of Large. It would be
nice if there were
> some
> way to display this window complete when using Large
fonts. I have not
> seen
> any programs that have problems with large fonts in
quite some time. I'm
> surprised that a program such as Dreamweaver would not
be coded to adjust
> correctly for large fonts.
>

PDF does not display correctly

Issue: One of our website page displays a PDF form filled with data retrieved from database. The PDF file displays perfect in IE browser, but the PDF form was blank in Firefox browser - can not see the filled data at all in Firefox browser nor in print-out from Firefox.
I installed the most recent version of Firefox PDF viewer 0.8.1 add-on, and played with different options under the menu "options/Portable Document Format (PDF), but no luck to solve the above issue.
I noticed that not only our website, but also some government websites have the same issue display data filled PDF.
Anybody can help me out to resolve this issue?
Many thanks!

This may well be a limitation of the JavaScript-based PDF Viewer. It currently does not support all the feature of the Adobe plugin (or stand-alone version of Adobe Reader). You can test that theory using the steps in this article: [[How to disable the built-in PDF viewer and use another viewer]].
While an end user can switch around among viewers by changing their Firefox options, unfortunately there currently is no way for websites to detect which viewer is in use and assist visitors in a personalized manner. I think for now you may need to recommend that Firefox users use the above article for assistance if more complex PDFs do not render as expected.

Splash screen does not display correctly

Hello everyone. I have a class which shows a spashscreen. When run from the main method it display the splash correcly.
I have a login module. When the login is sucessful , I call the splashcreen module. Here the problem arises. It just gives me the white background. The image is not there.
I also encounter this sort of problems when calling other panels from my mainpage. The panels have a background. When called for the first time they appear distorted. When a second time they are called( by clicking the menu button from my mainpage) everything displays correctly.
I am very confused with the above problem because there is simply no error in the coding. I can't see where the problem lies.
Please Please Help me! I'll be indepted to you all!

This is my class that I've written that works fine. Feel free to use it.
* SplashScreen.java created on May 14, 2003
* Copyright (c) 2003 Rene Peters Consultancy.
* This software is the confidential and proprietary information of Rene
* Peters Consultancy ("Confidential Information"). You shall not
* disclose such Confidential Information and shall use it only in
* accordance with the terms of the license agreement you entered into
* with Rene Peters Consultancy.
package nl.renepetersconsultancy.util.gui;
* An application to show a title screen in the center of the screen
* for the amount of time given in the constructor. This class includes
* a sample main() method to test the splash screen, but it's meant for use
* with other applications.
* @author Ren� Peters
* @version 1.0 May 14, 2003
import java.awt.Dimension;
import java.awt.Toolkit;
import java.net.URL;
import java.util.logging.Logger;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JWindow;
public class SplashScreen extends JWindow implements Runnable {
private Logger logger = null;
private int minimumDuration;
private String resource;
private boolean keepRunning = true;
private boolean waitForStop = true;
private boolean done = false;
* Constructor for the SplashScreen. Only used for initialisation. Nothing really happens yet.
* @param resource Location of the image (jpeg, gif, png or xbm)to be displayed in the SplashScreen.
* Image must be located somewhere on the classpath. E.g. "nl/petersconsultancy/planner/gui/logo.jpg".
* @param minimumDuration The time in milliseconds the SplashScreen will be displayed, at least.
* It can not be stopped before that. Values must be in the range [0, ->]. If smaller the 0 the will be
* set to 0.
* @param waitForStop Boolean to indicate if the object will be displayed after the minimumDuration has passed
* by calling the "pleaseStop" method or if it will stop being displayed anyway.
* background or the rest of the execution should hold for a while.
public SplashScreen(String resource, int minimumDuration, boolean waitForStop) {
logger = Logger.getLogger("nl.renepetersconsultancy.util.gui.SplashScreen");
     if (minimumDuration < 0) {
          this.minimumDuration=0;
     else {
     this.minimumDuration = minimumDuration;
this.resource = resource;
this.waitForStop = waitForStop;
Thread thread = new Thread(this);
thread.setDaemon(true);
thread.start();
* Check if the minimumDisplay time has elapsed already.
public boolean isDone(){
     return done;
* Request this from being displayed and have it removed.
public void pleaseStop(){
     keepRunning = false;
* Display the SplashScreen.
public void run() {
// Build the splash screen.
if (resource==null) {
logger.warning("The image to display in the SplashScreen is set to 'null'.");
return;
} else if (resource.equals("")) {
logger.warning("The image to display in the SplashScreen is set to an empty string.");
return;
URL URLImage = this.getClass().getClassLoader().getResource(resource);
if (URLImage==null) {
logger.warning("The resource for the image to display in the SplashScreen can not be found.");
return;
ImageIcon imageIcon = new ImageIcon(URLImage);
JLabel label = new JLabel(imageIcon);
// Set the window's bounds, centering the window.
// Take the dimension of the icon for reference.
int width = imageIcon.getIconWidth();
int height = imageIcon.getIconHeight();
Dimension screenDimension = Toolkit.getDefaultToolkit().getScreenSize();
int x = (screenDimension.width-width)/2;
int y = (screenDimension.height-height)/2;
this.setBounds(x,y,width,height);
JPanel content = (JPanel) this.getContentPane();
content.add(label);
// Display it while running for a while in the background.
this.setVisible(true);
try { Thread.sleep(minimumDuration); } catch (Exception e) {}
done = true;
if (waitForStop) {
     while (keepRunning) {
try { Thread.sleep(100);} catch (Exception e) {}
setVisible(false);
this.dispose();
public static void main(String[] args) {
SplashScreen splash = new SplashScreen("nl/renepetersconsultancy/util/gui/images/Ape.jpg",500, true);
while (!splash.isDone()){
try { Thread.sleep(50000); } catch (Exception e) {}
splash.pleaseStop();
System.exit(0);

HTML code does not display correctly

Similar Messages

Maybe you are looking for