HTML documents from Mac to Pad

I have developed a series of HTML-CSS-JavaScript pages (kind of utilities) on my iMac, and I would like to have them on my newly purchased iPad.
1. How do I transfer such documents from iMac to iPad?
2. How do I open these documents with Safari on iPad?
François

Sorry,
I was just reading steve jobs speech on why html5 should be used instead of flash, his big point was html just works the same everywhere so i want the web to stop using flash and switch to html so i can see it too.
but why would say abc.com take down there flash stuff and replace it with html if the flash they made works everywhere except my device and html needs to be made for every browser.
i dont like needing an app for every website and not all apps are free. i just want to surf the web like everyone else. and im now worried that my device is never going to be able to.
I saw this guy watching abc.com right on his phone.
http://www.youtube.com/watch?v=omBXttm-eec&feature=related
Then I saw this guy showing how html for macs wont work on ipads
http://www.youtube.com/watch?v=rfmbZkqORX4&feature=watchresponserev
now im scared abc.com will never change their site for my device which only supports html, because html needs to be made again for everthing and flash works everywhere.

Similar Messages

How to open document from mac when using windows without transferring the file?

How can i open a document from mac when i am using windows without transferring it?

depend on the document program more then anything else really
when ever I open a doc with word it make a history for undo and redo action file in the same dir
with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

How to get pages document from mac book to iphone 5 to send in a email

How can I transfer pages document from mac book pro to iphone 5. I want to email documnets from phone.

iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
To delete the pics from your MBP, just drag to Trash and empty Trash.
 Cheers, Tom

How do I get documents from mac to iPad

How do I get documents from Mac to iPad?

If you just have a few that you want to view, you can e-mail them to yourself and use the viewer in the mail app to view them.
If you have several or want to save them on the iPad or edit them then you'll need an app. Apple has iPad versions of Pages, numbers and keynote that should sync between your mac and iPad.

Opening help html documents from 10g form

We are converting our 6i forms to 10g. I am trying to open my help html documents from the 10g forms. We have modified the httpd.conf file setting the DocumentRoot "/oracle/apps/aces/help". This is the path where my html documents reside. From the 10g forms I am using web.show_document to open the html documents. I am getting a Page not Found error. Is there somewhere else the help path needs to be set?
Thanks!!
Shellie Bricker

The way i know is, putting some AliasMatch in the conf-file of Apache like
AliasMatch ^/help/(..*) "C:\help/$1"And then use WEB.SHOW_DOCUMENT with this virtual path
WEB.SHOW_DOCUMENT('//help/helpfile.html', '_blank');

I want to read a HTML document from internet

Is it i should use javax.swing.text.html.HTMLDocument?

Is it i should use javax.swing.text.html.HTMLDocument?What do the docs for that class say? Does it have methods for reading an HTML document from the internet?

Documents from Mac added to iCloud do not show up in Pages on iPhone 4S

Synopsis: Dcouments added to iCloud through Safari on Mac do not show up in Pages on iPhone 4S. New documents created in Pages on iPhone do not show up in iCloud. I expect the doucments to appear on my iPhone soon after uploading them from my Mac to iCloud through Safari, and to appear in iCloud soon after switching to the document listing in Pages and leaving the app. Several hours passed by without transfer happening, and I have waited a day and reconnected to Wi-Fi to wait several more hours. Still nothing shows up either in Pages on iPhone, or in iCloud in Safari on Mac. They are listed with their sizes and extensions (.pages or .pages-tef) in the iPhone Settings > iCloud > Storage & Backup > Manage Storage > Pages, though they don't seem selectable from there.
Software versions and Settings:
Mac
Mac OS X 10.7.2 (Lion)
Safari 5.1.1
Pages 4.1
System Preferences > iCloud: signed in; everything selected, except Photo Stream (no iPhoto).
Everything seems to work, except Find My Mac is flakey.
iPhone 4S
iOS 5.0
Pages 1.5 (417) [no other iWork apps]
Documents:
the defualt "Getting Started";
a test document with default name "Blank" and content with the word "Testing", shown with upwards arrow in upper right corner; tried renaming to "Just testing", no transfer resulted.
Plus button + offers: Create Document; copy from iTunes, iDisk, WebDAV; no iCloud (probably because it's supose to be auto);
Settings > Pages:
Use iCloud: ON
Restore: OFF; I have tried this, it automatically turns itself off after restarting Pages. No obvious changes result in Pages.
Settings > Wi-Fi: ON, connected to a network; tried several networks around town, as well as at home with a Time Capsule router.
Settings > iCloud:
everything ON, except Photo Stream;
Documents & Data:
Documents & Data: ON
Use Cellular: ON; also tried OFF initially.
Storage & Backup:
Manage Storage > Pages:
three documents in iCloud are listed, one of which I had created before iCloud on iPhone 3GS, and deleted from iPhone 4S after documents added to iCloud from Mac weren't showing up as expected;
their sizes are given;
suffixes are .pages for the two created on Mac, and .pages-tef for the one created on iPhone 3GS (before iCloud);
iCloud Backup: ON; successfully backs up everyday;
Email works, contacts are synced, calendar works, and everything seems fine except access to documents.
Approaches:
Software updates
Updated all software, no further updates available. Please confirm with aforementioned version numbers.
Add and Remove Documents
Used Safari to add two documents to iCloud with its menu for Pages of iCloud's iWork section, one at a time. Documents were originally created in Pages on Mac, and continuously edited since then. Explicitly saved documents (Save a Version on Lion) before uploading. Documents appeared listed in web page without problem.
Have tried deleting a document on iPhone that was originally created with Pages on iPhone 3GS prior iOS 5 as a way to jog the listing on iCloud. Listing on iCloud in Safari on Mac continues to show document deleted from iPhone. [Before deleting document, I had updated iPhone 3GS to iOS 5 and signed into iCloud a couple days before getting iPhone 4S, then immediately used the restore from iCloud feature for the iPhone 4S in the Apple retail store, updated all apps on Mac and iPhone, then deleted the document in Pages on iPhone.]
On iCloud in Safari on Mac: deleted the two documents uploaded from Mac; added the same documents again; edited documents on Mac, then uploaded and chose "Replace documents"; removed documents again; added them again. Never showed up in Pages on iPhone, even after waiting a day.
Have used iTunes to add the same documents to Pages on iPhone. Successfully opened documents in Pages on iPhone through plus button + > Copy from iTunes. Deleted documents from Pages's document listing, though they remain in iTunes section.
Removed documents of same name, though older copies, from Pages in iTunes for the iPhone.
Created a new document with Pages on iPhone, simply added one word "Testing" and then switched to document listing. New document has name "Blank" and an arrow in the upper right corner indicating it will upload next time an internet connection is established. That hasn't happened regardless of being connected to Wi-Fi and cellular for several hours. Next day, reconnected to internet with both Wi-Fi and cellular, the new dcoument "Blank" still is not in iCloud when I visit the site in Safari on Mac, and still has the arrow in the upper right corner in Pages on iPhone.
iPhone 4S Connected to Internet
Connected to Wi-Fi several hours each day, and cellular all day except from about 10pm to 7am when I switch it to Airplane mode. Always connected to Wi-Fi and cellular when attempting to access the documents in Pages on iPhone.
Restart iPhone and Pages
Have double-pressed Home button on iPhone to reveal along the bottom of screen a list of apps currently open, touched and held an icon to reveal the close badge on all icons, and selected the close badge on Pages, waited a few seconds, then started Pages again.
Have held On/Off button until "slide to power off" appears, then powered off iPhone, waited a few seconds, then held button again to start. Have done this with Pages either open or closed, per previous note. Still no change in document listing for Pages: test document still has not gone to iCloud, documents in iCloud still have not shown.
I think the only thing I haven't done is a complete restore.
Question: Can anybody point out what I might have missed or haven't tried that would get the documents from iCloud to Pages and vice versa?
I'm not looking forward to several hours of restoring, but if I must…
TIA

Okay, I'm not sure what finally jogged it. It seems to be finally working.
After downloading any documents I could from iCloud to my Mac, I deleted all the documents from iCloud. I also deleted all documents from Pages on iPhone, except the original "Getting Started" document.
I duplicated the "Getting Started" document (Pages on iPhone) and edited it by moving the butterfly to the left on the same page, then switched to the Documents view. It had the arrow in the upper right corner of "Getting Started Copy", but no progress bar and nothing showed up in iCloud.
Then, I think I went to Settings > Pages > Use iCloud: NO. Went back to Pages and got a dialog in the Documents listing:
     You are not using iCloud
What would you like to do with the
     documents currently on this
                    iPhone?
Keep on My iPhone
Delete from My iPhone
Continue Using iCloud
I tried keeping them, then going back and turning it back on in Pages's settings, then going back to Pages. Finally something different happened: a progress bar on the "Getting Started copy" document. It never seem to finish, and would disappear if the phone went to sleep. I tried the whole sequenece again with same result, and nothing on iCloud.
I then tried Settings > iCloud > Documents & Data: OFF, and agreed to "Turn Off Documents" and have all documents stored in iCloud deleted, because as far as I could tell there weren't any documents in iCloud at this point anyways. I went back to Pages and the "Getting Started copy" suddenly disappeared.
So, I went back to Settings > iCloud > Documents & Data: ON, and did the same for Settings > Pages > Use iCloud: ON. Oddly, Pages now tried to download "Getting Started copy" even though it really shouldn't have existed anymore. I tried iCloud in Safari on Mac and saw there now was a document by that name, but when selected it said "Updating…" on it. I deleted it in iCloud, and it disappeared (I think, or I deleted it) in Pages on iPhone.
I gave up and waited a bit, maybe an hour or two.
I made sure all the settings were how they needed to be, noticed no documents in iCloud, and only the original "Getting Started" document in Pages on iPhone. I duplicated that document, and that's when it seemed to actually work. First, the arrow in its upper right corner appeared briefly, then a progress bar appeared on it instead, then the progress bar actually moved and completed. (I think. Some indicator happened. Everything is kind of fuzzy at this point while I'm writing this and juggling a couple other technical tasks.) Then I checked iCloud in Safari on Mac and the document was there. Wow.
So, I immediately tried uploading to iCloud from my Mac the two documents I had been trying, one at a time. Each time the document succeeded in iCloud, it suddenly appeared in Pages on iPhone. In fact, the second document began to appear in the documents listing in Pages on iPhone just before the progress bar in iCloud completed.
I tried opening each one in Pages on iPhone, and iCloud immediately updated each one with a preview and as downloadable. I downloaded them to the Mac and they opened fine. [Admittedly, the Pages version from iCloud of the "Getting Started copy" with the moved butterfly was a little different in Pages on Mac: it had the butterfly on the previous page underneath everything; the PDF version of that document had everything correct.]
Anyways, the document listing between iCloud and Pages on iPhone is working now.
I thinking it might have helped to clear out all the documents in iCloud and deleting all documents in Pages for iPhone. However, be sure to at least email copies from Pages on iPhone first if you don't have any backups. I think it might also have helped to turn off Settings > iCloud > Documents & Data: OFF, so it'll send that signal to delete the documents in iCloud, even if there's already nothing there. I don't know for sure, but that's probably the way to start from scratch. Oh, and maybe wait an hour or two after that before doing anything again, then turn Documents & Data: ON, and Pages > Use iCloud: ON, and then start by creating a new document in Pages on iPhone.
I'm just glad I didn't have to do a Restore from iTunes. And now that it's working, it's so instant between Pages on iPhone and iCloud! This is seeming like it will definitely be great, now that it's working.

Retrieving html text not html document from RichEditableText control

Hi,
I have some html text
Ex- This is test 
which i am setting to RichEditableText using TextConvert.importToFlow(),I want to format this text just bold and italic and then get back same html text back with
only formatting i have done.
Suppose i have formatted this text in RichEditableText like;
Ex- This is test
But when i am trying to get back this from RichEditableText using;
TextConverter.export(richedittxt.textFlow,TextConverter.TEXT_FIELD_HTML_FORMAT,ConversionT ype.STRING_TYPE);
It gives a complete html document with <html><body> tags, which i dont want. It should not includes all these extra tags.
Can any one suggest, whether it is feasible or not ? Please reply if any one has solution
Thanks..

Leao,
> I didn't write the original actionscript so I don't
> really know how to implement what you suggested.
Aha! Well, that can be a bit like painting yourself into a
corner. ;)
> Could you explain a little more?
Spend a bit of time with the String class. Before you even
do that, you
may want to familiarize yourself with the concept of objects
in general.
See this introductory article ...
http://www.quip.net/blog/2006/flash/actionscript-20/ojects-building-blocks
... then spend a bit of time in a completely new FLA
experimenting with the
String class. Many of its methods are specifically geared
toward changing
the value of the text content, including stripping away
certain characters.
e.g., you can use String.indexOf() to return the position of
a particular
character (or characters) in a string of text. You may then
use that
position in cahoots with String.substr() to return a new
string that as been
"pruned" of undesired content.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Getting Pages document from Mac to Pages on iPad

I have been trying to import Pages documents from my Mac to my iPad throughh iTunes and I'm having no success. I go to apps in iTunes and under file sharing Pages shows up. I click add and navigate to the file. It seems to do something but when I go to Pages on the iPad it isn't there. However in iTunes I can still copy it back to my computer from the iPad even though it couldn't be found on the iPad itself. Also I thought that the tutorial document should be visible in iTunes as well where the file sharing is but it doesn't show up either. This situation also occurs with Numbers and Keynote as well. Any ideas?

On the iPad open Pages and go to the screen where all your Pages document are... You will see a folder in the upper right. Click on that folder you should find your imported Pages document. Click on the document and it will import to Pages. The same holds true with keynote and numbers.
You can delete the document from that folder if you don't need to import it again...this will save space on your iPad.
Message was edited by: David M Brewer

How can get document from mac to iphone

How can I get document from imac that is saved, to my iphone?

What kind of document?
iWork documents (Pages, Numbers, Keynote) can be saved to iCloud and opened by the corresponding apps on the iPhone.
PDFs can be transferred via iTunes or Dropbox and read using an application such as Goodreader.
If you can add some detail to your request, we can try to offer a better solution.
Matt

Interacting with html documents from flash

Hi,
I'm a newbie in actionscript. I created a world map in flash. The map has regions (Europe, North America, Latin America, etc.). The regions on the map are defined as buttons.
The final flash map will be embedded in an html document (map.html). The idea is that when you click for example the "Europe" button on the flash movie, this will open an html document called Europe.html and will show it underneath the map flash (inside map.html).
The "Europe.html" for example contains a list of countries.
In this mission I have 2 problems:
1. What script I have to attach to every region button on the flash map so it will call the right html file into the div on the map.html?
2. What script do I have to put inside the html document?
Any help will be much appreciated. thank you
Arie M.

assign your button an instance name (in the properties panel after selecting your button) and use that name in the actions panel:
yourbutton.addEventListener(MouseEvent.CLICK,f);
function f(e:MouseEvent):void{
navigateToURL(new URLRequest("map.html"),"youriframe")

Print html document from presentation server with no intervention of user

Hello,
I have been able to create HTML output for my smartform.
They are saved on my machine.
I need to print these HTML outputs as a part of process without intervention of the user.
Is it possible?
I have tried method 'EXECWB' of 'cl_gui_html_viewer', but that gets fired only on some action and shows the Print dialog for the selection of printer.
It would be great if anyone can help me with us.
Thanks
Mona

PDL -- thank you for your reply.
What you gave me did spawn the print dialog allowing me to select a printer. However, when the document printed, the number of pages in the document was correct but the pages were empty except for the page x of y along the top and the name of the document along the bottom. Have you seen this before and do you know how to correct? Also, how do you suppress the info across the top and bottom of the report from printing?
Thanks

Web sharing - viewing html files from Mac to PC

I am creating a website using QuarkXpress. Now I uploaded my html and image folder directly to my Site folder. My client has a PC, but cannot open the http address to view the page. Web sharing is on, also file sharing. What did I miss?? Thanks for your help.
I highlighted websharing in system preferences and gave my client my computer address. But the page does not load?
What's the difference from a remote computer and local IP range? I am confused there???

Do you have more than one device connected to your Router or Modem?
To see the difference between local & Remote, compare your IP in System Preferences>Network>TCP/IP tab & what your outside IP is...
what's my ip...
http://www.whatsmyip.org/

Printing Word document from Mac

When I print a word document I created, apostrophes are printing as some strange character that looks like a small 1 with an apostrophe above it.
Any ideas how I can stop this?

Try changing the font.
In general, best to seach/ask about MS stuff in their own forums:
http://answers.microsoft.com/en-us/mac/forum/macword

Anyone solved the printing mixed sized (Letter/Legal) documents from Mac version of Reader or Acrobat Pro?

I really need to be able to print mixed sized PDF documents in Reader or Acrobat Pro on a Mac. When I try, the letter sized pages are fine, but only the first legal sized page in the stack prints correctly. The rest shift down the page leaving a wide margin at the top of the page and then what should be printed at the bottom goes off the page. I have tried the settings in the Reader print dialogue box "Choose paper source by PDF page size", along with an umber of variations of all the other settings, and I still get the same results. Can someone please tell me that there is a way to do this? HELP!!!!

Hi DSKinCO,
Are you still facing this issue.
If yes, i would suggest if you create a new document using word with mixed page sizes. Try to print after converting that into PDF using either Acrobat or Reader.
Before you print, make sure your Adobe Acrobat/Reader is updated.
Regards,
Ajlan Huda.

HTML documents from Mac to Pad

Similar Messages

Maybe you are looking for