HTML formatted output is not coming as an attachment in the mail

Hi,
We have a requirement where we have designed xslt template and generating the HTML output. In the report server/ local machine we are able to get the report as a file, but when we are scheduling the report and setting email as the delivery method we are able to get the report, but the report will be coming in the email content instead as an attachment.
Please let me know whether we need to do any setting or configuration changes in the report server to get the report as an attachment to the email.
Thanks,
Kamath.

Hello Kamath,
Have you set PARAMETER6 to true or false?
http://docs.oracle.com/cd/E28280_01/bi.1111/e22258/add_burst_def.htm#CHEJDGAG
Please send us your bursting query so we can check it.
For more info on this, please review section 7.3 Adding a Bursting Definition to Your Data Model
from Fusion Middleware Data Modeling Guide for Oracle Business Intelligence Publisher
http://docs.oracle.com/cd/E28280_01/bi.1111/e22258/add_burst_def.htm#BIPDM347
Bogdan

Similar Messages

  • I am not able to open the html format outputs of SQR

    when I am trying to open SQR html formate output generated by SQR jobs not able to open the html format outputs of SQR getting below error
    but I am able to open pdf and excel formats outputs
    "An error was encountered while attempting to retrieve audit_control_info_frm.htm from the Hyperion Reporting and Analysis - System 9. This error is normally encountered when there is no free disk space on the machine hosting Hyperion Reporting and Analysis - System 9 Application. Hyperion Reporting and Analysis - System 9 Application uses a directory on the hard disk to store temporary files while downloading objects. To rectify this problem, if the disk hosting the Hyperion Reporting and Analysis - System 9 Application temporary directory is nearly full, free up additional disk space. After confirming that there is available disk space, restart ALL Hyperion Reporting and Analysis - System 9 servers. <p>Another possible cause of this error is that you have attempted to embed a "Versioned Collection" into your Personal Page. A "Versioned Collection" is typically created when you publish a document and request the creation of an additional compressed copy. Embedded "Versioned Collections" are not supported by Hyperion Reporting and Analysis - System 9.
    A general error was encountered contacting the server.
    Recommended Action: Contact your corporate technical support."

    Welcome to the Apple community.
    Have you tried restarting your web browser, if that doesn't help you might try emptying your web browser's cache.

  • HTML formatted output

    Hi All,
    I have xml source as,
    < SAMPLE_JOB>
    < ORG_DESCRIPTION>>& lt;UL& gt;& lt;LI& gt;& lt;DIV class=MsoNormal style=& quot;MARGIN: 0in 0in 0pt 0.25in& quot;
    & gt;& lt;SPAN style=& quot;FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-bidi-font-size: 12.0pt& quot;
    & gt;Design and deliver technical training courses to field service engineers, dealer, and customer support
    personnel.& lt;/SPAN& gt;& lt;/DIV& gt;& lt;/LI& gt;& lt;/UL& gt;
    < /ORG_DESCRIPTION>
    < /SAMPLE_JOB>
    when i am previewing in pdf output, i am getting the following for < ORG_DESCRIPTION>
    < UL>< LI>< DIV class=MsoNormal style="MARGIN: 0in 0in 0pt 0.25in">< SPAN style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial;
    mso-bidi-font-size: 12.0pt">Design and deliver technical training courses to field service engineers, dealer, and customer support personnel.< /SPAN>< /DIV>< /
    LI>< /UL>
    I want html formatted output. I saw tims blog. But here in my xml source i am not getting direct tags (instead of "< UL>", i am getting xml output as "& lt; UL & gt;"),
    can i also get the xsl equivalent code for tags like UL, LI, DIV, SPAN..
    Please help me.

    Your XML source is sorta odd.
    Where is it coming from?
    Word?
    This is what your xml should look like:
    < SAMPLE_JOB>
    < ORG_DESCRIPTION>Design and deliver technical training courses to field service engineers, dealer, and customer support
    personnel.< /ORG_DESCRIPTION>
    < /SAMPLE_JOB>
    Then you put it in your rtf and preview in pdf and it would look ok.
    The source xml is the problem - all this stuff is wrong or does not belong:
    & lt;/SPAN& gt;& lt;/DIV& gt;& lt;/LI& gt;& lt;/UL& gt;

  • ALV output is not Coming

    Hi Friend ,
    I ve a problem with the ALV output. Actually i am getting all the value in the internal table and then i am binding the table with the node . But i wonder why the output is not coming in the ALV table only the blank table is coming .
    Regards,
    Satya

    Hi
    first u instantiate the alv component with the use of wizard.
    then u call the method "GET_MODEL".
    Then u call the method "SET_DATA" and set the alv table with the node in which u have ur data.
    check this code.....
      DATA lo_cmp_usage                 TYPE REF TO if_wd_component_usage.
      DATA lo_interfacecontroller       TYPE REF TO iwci_salv_wd_table .
    *declaration of alv usage
    *declare config model
      DATA lo_config_model_value        TYPE REF TO cl_salv_wd_config_table.
      lo_cmp_usage =   wd_this->wd_cpuse_alv_requi_list( ).
      IF lo_cmp_usage->has_active_component( ) IS INITIAL.
        lo_cmp_usage->create_component( ).
      ENDIF.
      lo_interfacecontroller =   wd_this->wd_cpifc_alv_requi_list( ).
      lo_config_model_value = lo_interfacecontroller->get_model( ).
    lo_interfacecontroller->set_data(
          r_node_data =      lo_nd_req_list
    here lo_nd_req_list is the name of my node.
    Regards
    chythanya

  • I have an ipad2. My email account is on rediffmail. I am not able to set rediffmail on the MAIL icon on ipad2. Can you guide me?

    I have an ipad2. My email account is with rediffmail. I am not able to set rediffmail on the MAIL icon on ipad2. Can you guide me?

    really your going to want to contact verizon to get the proper setting

  • I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi. Please help...

    I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi (like a hotel). Please help...

    the appletv will not be able to work on it's own
    you can use a computer or iphone acting the role of hotspot login using it's browser and getting internet access and then sharing it with the appletv
    so the appletv sees it as a wifi router it connects to

  • Output message not coming automatically for PO

    hi
    i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string   SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
    Still the output message is not coming automatically while creating PO  every time i add output type namually.  please guide
    regards

    Hope you have maintained condition for combination. preferrably -
    1) Purch Doc type > PORG > Vendor
    2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
    Hope this will help you

  • Default output device not coming

    I made one PDF form and attached it in List LG01 in CB85 to print process order through COR2 output device is mentioned as LP01 in list Lg01, but while printing, output device is coming as which is mentioned in user profile.
    I want that output device which i mentioned in configuration should come as default during printing through COR2....Pl. help
    Edited by: lisa harley on Feb 26, 2010 11:09 AM

    Hello,
    Please check the below settings at "Printer Specification" for CB85,
    If output device = 1  ,then it will select the output device for user profile
    if output device  = 2 , Output device from configuration, ie CB85
    Regards
    Pradeep

  • Sound is not coming through logic but through the rest of the computer, what is wrong?

    Just today the sound in my logic express is not working. Sound comes through the rest of my computer-youtube, itunes, internet etc. but not through logic on any file that I open up. Could the audio configuration of the program be damaged? I just have no idea what is wrong. Please get back to me if anyone recognizes the issue.

    When you say the sound in LE is not working, do you mean that it is not playing through your computer's speakers?
    In Logic, check your Preferences>Audio>Devices>Core Audio tab and make sure your output device is set to Built-In Output, or whatever your preferred device is.

  • I am having problem with speaker the sound is not coming properly from it also the right side hinges

    Hi,
    I am having problem with speaker from last few days when ever i tryed to play songs the speaker is not giving sound properly. Secondly the the right side hinges also boken so needed support for both the problems.
    Thanks & Regards 
    Umender Sahani

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not help, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
    iPhone - Contact Support - Apple Support

  • Invoice output to be added as an attachment in the same invoice

    Hi All,
    We are using attachment functionality in R/3 System & we have a requirement that the output associated to that invoice should be attached to the same invoice as a PDF format, can this be achieved in simpler ways.
    I am looking more at standard ways or with minimal developments, below is the logic which am planning but it is complex
    PDF conversion to be adopted, but not sure on how it works on batch job ( if this is possible, please let me know)
    Populating the output in an application layer as a PDF by batch job using VF31 transaction ( not clear on the way the naming convention that can be made on such things & hence presume for naming convention atleast i need to go for custom development).
    I was indicating about naming convention in the earlier step which will be useful for me when i create a z-program that will take the file name & opens the invoice in VF02 & take that PDF for attaching it.
    if we have any other alternatives, please let me know.
    Regards
    Ilango

    At the first outset, I dont think, this is possible.  Moreover, this approach is definitely not recommended since it will severely impact on the system performance and if there is a Security Team, they will not allow to have this practice.
    Normally, either we can send as PDF attachment to any internal user via email or this can also be sent externally via PDF.  There is also an option to view as PDF from the existing output itself.
    G. Lakshmipathi

  • On my ipad mail, the attachment pdf bill with password is not visible when I am opening the mail

    On my ipad configured mail, When I am receiving an attached monthly bill pdf with password, I find that the attached file is not even visible when I am opening the mail. Hence, I am not able to see the attachment to open.
    Can anyone suggest the way out please.

    Open with free Adobe Reader.
    https://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8

  • Output is not coming for a specific billing documnet no

    Hi,
      I am not able to get the out put of a smartform for a specific billing document number.For othe documents output is coming.
    For that specific billing document no ,the field are showing '#' mostly.Evenif i am not giving any conditions then also its showing
    #.Its not showing the output for the page no even.
    Can u please suggest something..
    Thanks.

    Try to debug the smartform.
    Put a break point in the smartform and then try to execute. check for the value. Check it out.

  • Page-break in alv background job for alv output variant not coming correctl

    Hi,
    I have created an ALV grid report. When i run the report in background i get the output with correct page-break on FIELD1. Now when i run the report in background with an "ALV output variant" (its the ALV variant that controls the fields display in the output; this is not the program variant), i do not get the page-break on FIELD1.  I have already build the sort criteria and using:
    gs_sort-group = '* '.     "New-Page
    Please let me know what could be reason for not getting the page-break in background when i am using the alv output variant and how do i correct this problem.
    Regards,
    Rakesh

    Hello Everyone,
    I have solved the problem. While running the program in background, we get the page-breaks when we use the below part of code in the sort catalogue with the condition that the program variant should not use any ALV layout variant.
    gs_sort-group = '* '.     "New-Page
    If you are using the ALV layout variant in the program variant then we can check the ROWPOS, COLPOS, and NO_OUT for that ALV layout variant and pass them along in the fieldcatalog table. You should be careful with not to pass the layout variant in the DISVARIANT. You can notice that i have cleared it and simply passing the program name into that.
    *C-- Process separately for jobs running in Background. Actually
    *C-- sortcat-group solves the problem only in Foreground. In background
    *C-- when ALV layout variant is not selected then it works otherwise it
    *C-- fails. So for background jobs we are reading the fieldcat and then
    *C-- passing the same in the display FM.
      IF sy-batch = 'X'.
        CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
          EXPORTING
           i_dialog                  = ' '
           i_user_specific           = ' '
           i_default                 = ' '
    *   I_TABNAME_HEADER          =
    *   I_TABNAME_ITEM            =
            it_default_fieldcat       = gt_fieldcat
            i_layout                  = gs_layout
    *   I_BYPASSING_BUFFER        =
    *   I_BUFFER_ACTIVE           =
         IMPORTING
    *   E_EXIT                    =
           et_fieldcat               = lt_fieldcat
    *     et_sort                   = gt_sort[]
    *   ET_FILTER                 =
    *     es_layout                 = gs_layout
         CHANGING
           cs_variant                = gs_disvariant
         EXCEPTIONS
           wrong_input               = 1
           fc_not_complete           = 2
           not_found                 = 3
           program_error             = 4
           OTHERS                    = 5
        IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CLEAR gs_fieldcat.
        LOOP AT gt_fieldcat INTO gs_fieldcat.
    *C-- Transfer all position changes to gt_fieldcat from lt_fieldcat
          CLEAR ls_fieldcat.
          READ TABLE lt_fieldcat
                INTO ls_fieldcat
                WITH KEY fieldname = gs_fieldcat-fieldname.
          IF sy-subrc = 0.
            gs_fieldcat-row_pos = ls_fieldcat-row_pos.
            gs_fieldcat-col_pos = ls_fieldcat-col_pos.
            gs_fieldcat-no_out = ls_fieldcat-no_out.
            MODIFY gt_fieldcat FROM gs_fieldcat INDEX sy-tabix.
            CLEAR gs_fieldcat.
          ENDIF.
        ENDLOOP.
    *C-- Clear the disvariant for the background job as it contains the ALV
    *C-- layout varinat
        CLEAR gs_disvariant.
        gs_disvariant-report = 'ZGPPMP0001'.
    Then pass gt_fieldcat to 'REUSE_ALV_GRID_DISPLAY'.
    The reason i'm doing it this way is that when we pass the layout variant name, the contents in gt_fieldcat were getting modified.
    One more thing i'd like to point out is that that, i tried to delete the fields with no_out = 'x'. Now when i ran the program in background with all the fields in sort catalog (suppose there are 2 fields field1 and field2) also in fieldcatalog it ran fine. In the next run in background i removed one of the fields in sort catalog from the fieldcatalog (delete the fields with no_out = 'x') and i got dump. Basically i had hidden field1 and so the code which was deleting fields with no_out = 'x' deleted this field from gt_fieldcat. So basically we should not delete fields with no_out = 'x'.
    I was getting ABAP runtime errors    MESSAGE_TYPE_X in the following part of the standard code.
    000310     LOOP AT CT_SORT INTO LS_SORT.
    000320
    000330       READ TABLE IT_FIELDCAT ASSIGNING <LS_FIELDCAT>
    000340            WITH KEY FIELDNAME = LS_SORT-FIELDNAME BINARY SEARCH.
    000350       IF SY-SUBRC NE 0.
         >         MESSAGE X000(0K).
    000370       ENDIF.
    000380
    000390       LS_SORT-SELTEXT = <LS_FIELDCAT>-SELTEXT.
    i have just mentioned this part because when i checked the forum many people were getting such errors "MESSAGE_TYPE_X". This could also be one of the reasons.

  • Output type not coming automatically

    HI
    Whenever i am creating using t.code mb11 t.code i have to give output type wa03 manually,is this possible automaticaly output type generation in mb11 t.code
    Below settings also i completed
    NACE-Select ME Click on Condition records- Select WA03-Trans/Event Type-"WA" Print Version " 2" and Execute it
    In the next scren P-1, madium-1, Language EN and enter,, Now select the line and click on the communication method LP01 and save it,,
    Regards
    sam

    Hi
    Bijay and nisha thanks for reply still not come my output type automaticaly,i have completed my configuration in omj3 t.code for my plant and storage location.nacz t.code i give 173 GR/GI requirement,
    Regards
    sam

Maybe you are looking for