HTML Glitch Need Help Quick!

+*I Need Help Now on this!+*
I tried to open an HTML file in iWeb, and of course, it couldn't open it (I Should have known)
But now, every time I open iWeb, it says (File).html cannot be opened (and I only tried to open it
the first time!) and then it closes!
what can I do!!?

Go to
~/Library/Application Support/iWeb/
and open the domain file.
Next time iWeb will remember this.
Where ~ is your Home Directory (Cmd-Shift-H)

Similar Messages

Imessage won't send, nor receive! Need help quick

I contacted apple and they told me to call sprint and have the re store the settings or something along those lines. I've tried everything from hard resetting to turning wifi on and off. I need help quick nothing is working and I need to stay in touch! Thank you

travis142 wrote:
Yeah, Sprint was not available. I would like imessage to be working by the end of the night.
Try turning iMessage off, and then turn it back on again...
Troubleshooting Messages
http://support.apple.com/kb/TS2755
troubleshoot iMessage activation

Can't activate iPad after getting it from repair. Need help quick!

I recently broke the screen of my iPad but the hardware was working very well. Today I got it back from the repair service I gave it to (not Apple store), and when I turn on the iPad, it tells me to activate the iPad using my Apple ID, I enter all my info correctly, but it doesn't unlock. Did they give me a wrong iPad, did I get scammed? Please I need help quickly since I will be leaving the town after 3 days. Thanks for any help

Do you have the serial number of the iPad you purchased & sent in for repair? If so, look on the back/bottom of the iPad to see the serial number of the iPad you have. Does it match?
 Cheers, Tom

I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??

Try
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Need help quickly as possible for the error 0xc004c008

hi,i have lenovo ideapad z580 laptop with windows 8 pre-installed still within the warranty period but after doing one key recovery for the second time an activation error appear as following "the product key is already being used on another pc,try
a different key or buy new one" with the following error code "0xc004c008" and i have contacted lenovo they gave me new product key but also the problem still exist and also one of my friends have a look at the laptop and told me that to go
to lenovo and have a new windows 8 installed on the laptop but i am really confused and don't know what should i do? . So,please i am really need help quickly and thanks in advance

Well, there's enough time, so if you start the ball rolling with your code then people will help - but you have to do the work. We won't do your homework...

Problem burning DVDs, NEED HELP QUICK

Hey,
I need help as soon as possible. I am using iMovieHD 5.0.2, along with iDVD 5.0.1. I have made a movie about 8 minutes long and all in all it totals 7.68Gigs, and i've tried burning it to a dvd. I did all the steps it says to, going to Share, sharing it with iDVD, then trying to burn it in iDVD. Yet whenever it asks me to insert a recordable dvd, i do, and the computer fails to recognize it. I am using a DVD-R, 4.7GB discs, 4x. I then realized that the movie i was trying to burn was larger than this disc, which might be the problem. I then created a 200mb movie and tried, but the same problem happened. My G5 is not recognizing the blank dvds, yet when i insert a dvd that was made a while ago from a different source, yet the same type of dvd, it plays fine.
The problem seems to be in recognizing the blank DVD, and im pretty sure that its compatible with this computer, being that it plays when theres already a movie on it.
Can someone please help me quickly, this is for a production company and we're losing out every day that i dont get this done. Thanks a million.

I don't have an answer, but as an initial diagnostic step, try loading a blank DVD while iDVD is not running. First open your System Preferences and select the CD/DVD icon. Make sure the options selected do not say "Ignore". Then load a blank disc. Depending on your preferences, you should get some sort of reaction - either a burn window opens or you get a prompt asking you what to do. If there's no reaction from the Finder, it would indicate that the drive is not recognizing the blank DVD. This would be either a hardware or a media compatibility problem. Only way to tell for sure is to run out and try a different brand of media.
- Andy
PowerMac G5 dual 2.5 Mac OS X (10.4.4)

Need Help Quick to Teach Myself...

I'm looking for some guidance. I'm starting on a Sharepoint migration project from 2007 to 2013 soon and need to teach myself all I possibly can rather quickly. I've been looking all over the internet to try to find free classes and tutorials.
This is my chance to prove myself and I don't want to mess up and don't want to look stupid. I need to be impressive here.
Can anyone help me find some free classes and tutuorials? I'm an end user, but I would like to know much, much more from a web developer and business intelligence portion of Sharepoint. Just some direction that anyone can point me in where I
can just start and then take off quickly. Please, please, really need help here.
Thank you!

Start by reading all the articles on the following web sites. to upgrade from 2007 to 2013 you need to either use a third party tool or upgrade first to 2010 and then 2013.
Here's a link to the Microsoft site on how to upgrade from WSS 3.0 to Foundation 2010.
http://technet.microsoft.com/en-us/library/cc303309(v=office.14).aspx
and here's the site with information on how to upgrade from Foundation 2010 to Foundation 2013.
http://technet.microsoft.com/en-us/sharepoint/fp142375.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Got someone else's details on my iPad, need help quick

Ok, I really need help, I work on my new iPad 3 a lot, and my contacts mean a lot to me, but today I opened up my contacts and found names and numbers that i had never seen before in my life, then I opened up the photo stream and realised some girls Random Pictures had turned up...I don't want anything to do with this other persons information. And I don't want them having the ability to access mine, as it is important and private... Why is this happening, why is someone else information merging onto my device, I need immediate help as I'm loosing valuable time. Many thanks.

Go to settings>icloud, and make sure its your account there and not someone elses, and if possible go to icloud.com on a COMPUTER not the device and log in with your apple id, if you feel your account has been jeopardized please call in the apple support line and ask to speak with a iOS Senior advisor

Need help quick! :3

i dont remember my security questions so i cant get any thing in itunes. any way to reset without having to put them in? i need help fast. :3

Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

How to (make best) use external js library from html object (need help from dev)

Ok, on another discussion about rotating full screen backgrounds slideshows, i was orientated to try a small lib named "backstrech"
I throw myself in, and i really like what we can do with it.
To use it simply, just make an html object and paste this in :
<script src="http://musecdn2.businesscatalyst.com/scripts/4.0/jquery-1.8.3.min.js" type="text/javascript"></script>
<script src="assets/jquery.backstretch.min.js" type="text/javascript"></script>
<script>
$.backstretch([
      "http://dl.dropbox.com/u/515046/www/outside.jpg"
    , "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
    , "http://dl.dropbox.com/u/515046/www/cheers.jpg"
], {duration: 3000, fade: 750});
</script>
then add the jquery.backstretch.min.js to your "downloaded files" (file menu > files to download)
And you’re done.
Now, i need some help from better developers.
As you can see, my first line is a call to jquery, the same that we find later in Muse exported code.
Reason 1 : without this line, jquery is not defined and the plugin won’t work.
This raises 2 issues :
- We load twice the same ressource which is useless (100k)
- loading js is all about having the page hangs while it loads, hence, they are put at the end of the body.
Does anybody know a way to load this particular html script AFTER we are sure the muse scripts (esp. jquery) have been loaded ?
(in the Edge Animate world, i’d go for the yepnope, and put it at the right place in the code, though, here i have no access to page load structure except head)
PS : in addition to that, i made an exported page/excluded from navigation where i put all the images i wanted for the background, i could then simply change the images lines :
, "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
to
, "images/my_image_name_as_in_ressources.jpg"

Got it, there was a bug in my code. Here is what you do:
1. Download the js file https://raw.github.com/srobbin/jquery-backstretch/master/jquery.backstretch.min.js
2. In Muse: Go to File -> Add Files for Upload and add the script file
3. Open Page Properties -> Metadata -> HTML for <Head>
Paste this code in:
<script>
window.onload = function() {
var loaded = function() {
$.backstretch([
      "http://dl.dropbox.com/u/515046/www/outside.jpg"
    , "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
    , "http://dl.dropbox.com/u/515046/www/cheers.jpg"
], {duration: 3000, fade: 750});
//Load the plugin:
var head= document.getElementsByTagName('head')[0];
var script= document.createElement('script');
script.type= 'text/javascript';
script.onreadystatechange = loaded;
script.onload = loaded;
script.src= 'assets/jquery.backstretch.min.js';
head.appendChild(script);
}; //Window OnLoad
</script>
4. Preview or Publish = Done!
Example: http://musebackstretch.businesscatalyst.com/index.html

If you need help quickly... Guideline for posting an effective question.

Whenever you have a question that you would like answered, do pose that question effectively.
First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
Last:
Everybody has to learn, has the right to ask questions and be helped.
If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
7. Download Process Explorer , and either post a screen shot or a link to the results.
8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
Hope this helps to post more meaningful questions and get an answer much quicker.

Whenever you have a question that you would like answered, do pose that question effectively.
First, do not assume that because you have tried many, many times that your question is understood by someone else. What is obvious to you may not be for another. So please state in a very detailed and structured way what steps you have taken to cause your problem, how you can replicate this problem, under what circumstances on what hardware/software.
The fact that you have nearly given up because of your problem does not mean that someone else can readily understand this problem. When you go to your doctor and say: "I have a pain in my stomach" he will ask you a lot of questions. Same applies here. Your doctor may need to know about any medication you have taken, your blood pressure, history, etc. If you want help, be as PRECISE and ACCURATE as possible.
Second, this is a USER TO USER forum. So ranting will not help. What may help is a STRUCTURED approach to describing the problem you have.
Third, do a thorough search of posts here, on other fora and with Google before repeating what has been asked a thousand times and has worn out the patience of regulars here, who have answered your question a dozen times already. Use the FAQ and the Wiki to find answers to questions that have been posed and answered repeatedly. Do not assume you are unique with your problem. Well, you are unique, the problem you have most likely is not.
Fourth, realize that even though it may be highly frustrating to you to not be able to solve YOUR problem, by posting your question here, you are dependent on fellow editors to help you on their free time without compensation, so bear with them to help identify what EXACTLY is your problem. If you lack that decency, you may forfeit their help, so why did you come here?
Fifth, consider your work flow in light of the purpose of Premiere, an editing package. If you have problems with rotoscoping, programming with APL, spreadsheets in general, word processing on a mobile phone, importing Panda bears into a local zoo, feeding nearly distinct whales in the Alps, or anything far removed from the purpose of PP, you may be better off in posting your question elsewhere.
Last:
Everybody has to learn, has the right to ask questions and be helped.
If everybody has the decency to pose their urgent, life threatening or other questions in a detailed, structured and comprehensible way, it will vastly improve the chances of speedy and helpful replies, without the need for sarcasm, bundles of to-and-fro posts without meaningful help, just wasting bandwidth.
I know I have been rightly accused of such behavior, which was the result of sheer frustration with absolutely meaningless and often pointless questions without details, structure and the like. Maybe this can be a general guideline for posters on how to ask questions, in addition to Eddie's links and How to ask questions the smart way
The most frustrating issues one can encounter are hangs, BSOD's (blue screens of death), system errors and other cases of seemingly random erros that require rebooting, restarting or similar actions, only to be confronted with the next hang, BSOD or system crash.
These errors are often difficult to locate, due to the large variety of systems, components and driver or software versions in use. This is often further aggravated by sheer lack of expertise, understanding of what needs to be communicated in order for others to help solve the issue at hand. And that list is very long.
So, in order to make it a bit simpler for the average user who encounters these problems, follow the following steps when posting a problem:
1. Clearly describe the main problem in the topic, but be brief. Not so brief as to only say: "Help!" or "URGENT" or another meaningless statement but get to the point, like: "PP crashes on opening, requiring a reboot" or "Using DL the system hangs upon return to PP". You get the point.
2. Briefly describe your hardware, software, OS and versions in use, including disk setup, video card and driver versions, etc.
3. Describe source material, including codec (not AVI, which is not a codec), project settings and other relevant info.
4. Describe as accurately as possible what you did, what steps you took, what happened at what moment and what you did to try to resolve it.
5. Go to Start/Run, type in DXDIAG, enter and save all information to a TXT file. Include a link to that file in your post.
6. Go to Start/Run, type in MSINFO32 (or similar for 64 bit OS), enter and save the results as a .NFO file. Include a link to that file in your post.
7. Download Process Explorer , and either post a screen shot or a link to the results.
8. Make a screen shot of the results of SpeedFan or HW Monitor and include that in your post.
When you perform these basic steps, you avoid endless questions about your system and people may be able to help you faster.
If you feel up to it, take a look at The Case of the Unexplained to start your own troubleshooting.
Hope this helps to post more meaningful questions and get an answer much quicker.

HTML JAVA NEED HELP

I am very new to Java and need some help.
I am trying to manipulate values about on a web page and seem to have got stuck.
The following are variables that are entered
PRICE (typed in)
BID (typed in)
New or Second Hand (radio Buttons)
Then calculate is clicked.
I can get outputs to work but I can't seem to use the PRICE, BID, or BID % to show in the output Box.
and
I can't seem to use what radio button is selected elsewhere other than the output box.
What I want is to use all variables at any time to calculate and manupulate them.
Here is the code, this should clarify what I'm talking about:
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>New Page 1</title>
</head>
<body>
<SCRIPT LANGUAGE="JavaScript">

</SCRIPT>
<center>
<FORM METHOD="POST">
</center>
<p><font size="5">Price �<INPUT TYPE=text NAME=myPrice SIZE="14" ONCHANGE="SetmyPrice(this)"></font></p>
<p><font size="5">Bid �<INPUT TYPE=text NAME=myBid SIZE="14" ONCHANGE="SetmyBid(this)"></font></p>
<p style="margin-top: 0; margin-bottom: 0" align="left">
<input type="radio" checked value="New" name="type">New </p><p style="margin-top: 0; margin-bottom: 0" align="left">
<input type="radio" value="Second Hand" name="type">Second Hand </p><p style="margin-top: 0; margin-bottom: 0" align="left">
<INPUT TYPE=BUTTON ONCLICK="Calculate(this.form), output(this.form)" VALUE="Calculate"><INPUT TYPE=BUTTON VALUE=" Reset " onClick="ClearForm(this.form)"></p><p style="margin-top: 0; margin-bottom: 0" align="left">
</p><p style="margin-top: 0; margin-bottom: 0" align="left">
OUTPUT</p><p style="margin-top: 0; margin-bottom: 0" align="left">
</p><p style="margin-top: 0; margin-bottom: 0" align="left">
</p><p style="margin-top: 0; margin-bottom: 0" align="left">
<font size="5">Bid </font><font size="4"><INPUT readonly TYPE=text NAME="Fbper" VALUE="" SIZE="4">%</font></p>
<p><textarea name="response" rows="3" cols="70"></textarea></p>
<center>
</FORM>
</center>
</body>
</html>

That's not java, that's javascript.
Thanks again to those boneheads at Netscape who decided to confuse everybody with that name. For that matter why does Sun have to have two sets of version numbers for every product.
Anyway you may get a better response on a javascript forum.

Need help quick: "Oh" the problems!

So I have a quick project to do that I'm not getting paid for (boo) so I want to do it the quickest/easiest way possible. Here goes:
I need to make a simple song like "row row ow your boat" out of different humans saying "OH". Some "ohs" can be sexual, some can surprised and it should be a mix of male and female.
I was planning on bringing a mic to work, having several people say "oh" then loading the wav. files into EXS24, pitching each one and mapping each "note" onto an octave and then playing "row your boat" in midi.
Is that the best/quickest/easiest way? It only has to be 30secs or less and it's only spec work and not for broadcast. Any suggestions? Maybe there are enough "ohs" in the loop library to do it without recording. Please help!
Thanks, I "oh" you a brew!

Is that the best/quickest/easiest way?
The best/quickest/easiest way:
Drag the recording or samples into Redmatica's Keymap. Select all -> Remap by pitch detection. Save EXS. Load that instrument into Logic. Should take under two minutes.
Well, you didn't say it has to be done entirely in Logic!
Without Keymap, then the remapping will have to be a bit more, uh, "manual" - will probably take you under half an hour to trim and map the notes to the right notes and change the pitch accordingly.

Acrobat links don't work on CD-ROM. Need help quickly...please??

This is my first project in Acrobat and it seems to be somewhat simple but this is my problem.
I have pages that link to external files (.jpgs, .eps, quicktime movies). All of these links keep their "absolute" addresses when i copy the .pdf files to a CD-ROM. All of the navigation to other .pdfs are intact. I don't understand. Why is linking to a .pdf relative while linking to a file is absolute ? I thought I was ready to deliver this project but I don't know how to fix this. I have many links to external files that need to be fixed.
Can anyone help ?
Frank

I'm having the exact same problem. Everything works on the computer but somehow fails after being burned to disk. Also, ike you, I though I was wrapping thi project up but now it's completely broken. My sequence was like this:
Set up product catalog lat year with links and files, everything was fine and worked as expected.
Opened the file, made my edits.
Made links between the pdf's pages and from the pdf to external pdfs and videos etc. All of these links work in the pdf.
Burn the files to a disk
Some of the old links work
All the links within the pdf work
None of the new links to external files work.
Please help. Any and all help is very much apprecitated.

I need help quick - battery and data - solutions please?

I have an iPhone 4 here in Canada on the Telus network.I have upgraded to iOS6. The last 4 days the battery has been draining very quickly, by 2pm its less than 10%. The phone is also getting very hot. Today I received a message that I have used 95% of my 1 GB of data, a message I have never seen before.
So far I have:
-turned off almost all notifications
-turned off locations in almost all apps (maps of little value without it)
-changed from push email to fetch
-deleted all recently added apps
Any thoughts on how to rectify the issue?

To start with, the SprymenuBar is not suited for touch screens, it will not work.
You are better off using a jQuery or a commercial menu.
Even then, you must provide the styling rules for the different widths. Fixed widths, such as those in the SpryMenuBar are a no no.
Have a look here http://www.projectseven.com/products/templates/pagepacks/css-builder2/index.htm to see what happens when you go to narrower screens sizes or here http://foundation.zurb.com/page-templates/homepage-1.html. The former is a commercial product, the latter is free of charge.

HTML Glitch Need Help Quick!

Similar Messages

Maybe you are looking for