HTML GUI Issues

Hello Everyone,
We are using EP 7.0 SP14 with External ITS and backend r/3 4.7.
When we are trying to execute the Reports from our Portal without giving Selection Criteria, then we are giving the below error:
@@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)! @@ Runtime error: Assignment to context failed (context overflow)!
But we can able execute the same Reports from backend r/3 without Selection Criteria without any problems.
Also some of the columns are Truncating when accessing from Portal. But in backend r/3 the columns are not truncating.
Please help me in resolving the above issues. Thank You.
Thanks & Regards,
Sridhar.

Hello Edgar,
Thank you for your help.
We applied the SAP Note, but still we are facing the same issue, do we need to increase ITS RAM and later need to the increase the MaxCtxtSize to some more?
Regarding Column Truncatiion: Some of the column values are truncating when accessing from Portal. But in backend r/3 the columns are not truncating.
Please suggest me.
Thanks & Regards,
Sridhar.

Similar Messages

  • What is the best way of doing it? SAP Gui or HTML gui

    What is the best recemended option of SAP Win gui or HTML gui doing it for the Portal for R/3 transactions.
    I heard there is much network space will take if i use HTML gui for more than 1000 users, when u consider.
    Ur suggestions are Welcome.
    Pl explain ur suggestions in detail.
    Thx
    Pradeep

    Hi Pradeep,
    check this post for valuable informations regarding your question:
    SAP GUI versus Web GUI
    Hope this helps,
    Robert
    PS: If YES, please consider rewarding points

  • SAP GUI issues - VA41 - additonal data B screen is not visible completly

    Hello everyone,
    Tthere was a problem reported by one of our sales users that in VA41/VA42 screen, there are different tables available, there is a tab "Additional data B" for one user only half of the tab is visible in the presentation server. The user is not able to scroll right/left and couldn't do any data entry on that screen.
    Any one has any clue why this issue is only for this user.
    The GUI version and patch : 7.10 with Patch level 3 ( File version : 7100.1.3.1029)
    When we ask the user to try logging with his id in another PC, the table is visible completely. Both the desktop' GUI version is all the same. No other user is having this issue except one user. Hence I think it is related to GUI issue.
    If anyone faced this issue before, please suggest a resolution/workaround
    Please don't suggest for higher level patch, other PC's with the same level patch is working fine.
    Rajan

    We had a similar issue with a different t-code. The user also had a problem with Outlook and the CRM system we use. We eventually decided thet athe user's profile information was corrupted.
    We deleted the user's windows profile on the particular PC and then created it again. This fixed the problem - probably not the best answer, but it worked.

  • MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

    Please can you help me!
    Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
    Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
    Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
    But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
    I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
    Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
    This is my newsletter displaying correctly via a browser:
    http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
    Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
    Hope you can help
    Many thanks

    Many thanks David
    I also found this article which is currently sitting on my desk.
    Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
    Thanks again for your kind advice.
    Regards
    ShortsTV
    Date: Fri, 30 Nov 2012 18:05:08 -0700
    From: [email protected]
    To: [email protected]
    Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
        created by David__B in Adobe Creative Cloud - View the full discussion
    Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is Muse compatible with Email Service Providers. I found html code issues - PCs have viewing issues

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

  • GUI issues in MARS

    Dear Friends,
    I have a MARS 100 appliance running ver 6.0.6 and some gui issues.
    I have to click on GO button the browser twice or thrice and only then it opens the page. This behaviour happens randomly with clicking different pages like Query page, Incident page and so on. So what i do is click on the Incidents page, if the progress bar below on the browser window freezes and never moves saying "Waiting", i then click on the Go button and then the page opens!! Sometimes i have to clock on go button multiple times.
    Has anyone else faced this issue?
    thanks a lot
    Gautam

    THe following
    is the sysstatus information
    sysstatus - 21:32:44 up 18 min,  1 user,  load average: 4.00, 4.20, 3.20
    Tasks: 175 total,   3 running, 172 sleeping,   0 stopped,   0 zombie
    Cpu(s): 37.7% us, 11.7% sy,  0.0% ni, 35.4% id, 15.0% wa,  0.2% hi,  0.0% si
    Mem:   4154060k total,  4137392k used,    16668k free,     2504k buffers
    Swap:  4200988k total,    31968k used,  4169020k free,  2866712k cached
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
    3305 pnadmin   18   0  239m 108m 7476 S 74.7  2.7   4:32.00 pnesloader
    3508 oracle    16   0 1329m 645m 642m R 44.1 15.9   2:00.48 oracle
    3335 pnadmin   16   0  560m 143m  15m S 21.1  3.5   5:55.85 pnparser
    3037 oracle    18   0 1358m 731m 700m D  9.6 18.0   3:41.65 oracle
    2805 pnadmin   18   0 1063m 333m  14m S  1.9  8.2   4:36.50 java
    2886 oracle    15   0 1343m  75m  73m S  1.9  1.9   0:10.28 oracle
    3320 pnadmin   18   0 98.7m  37m 8984 S  1.9  0.9   0:38.36 process_postfir
        1 root      15   0  3324  568  480 S  0.0  0.0   0:01.02 init
        2 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/0
        3 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/0
        4 root      RT   0     0    0    0 S  0.0  0.0   0:00.04 migration/1
        5 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/1
        6 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/2
        7 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/2
        8 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/3
        9 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/3
       10 root       5 -10     0    0    0 S  0.0  0.0   0:00.00 events/0

  • UWL HTML Gui is not launching T-Code

    Helllo Experts,
    We have a workiten in UWL that launches a transaction code in ECC when you click it.
    When I set the SAP Gui type to Win Gui it launches the t-code. If I change it to HTML Gui it does not open the t-code, I don't get any error message and it goes straight to the navigation screen.
    In our development environment, the html gui works perfect. We have the problem in our QA environment.
    Thanks
    Ismail

    Hi,
    did you check that ITS is working fine in your QA.
    check webgui under ITS working fine or not under sicf.
    Thank you
    swapna

  • Configuring CE510 thru the HTML GUI

    I have a Ce510 Content Engine at a Customer Site that needs to be configured. The customer purchased the product a couple of years ago, but did not really do anything with it until recently.
    I need to find a manual or documentation that specifically addresses using the HTML GUI ( the box is running ACNS Version 5.1), as there are many configuration options within the GUI, but I have as yet not been able to find anything on the Cisco Web Site for configuring it.
    Please Help.
    Thanks!

    Hi,
    Unfortunately, what you are looking for is not available. This due that the options of the GUI are somewhat limited for initial configuration, but complex setups and commands are only availabe from the CLI.
    This link shows the configuration options of the 5.1 ACNS code: http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns51/cache51/index.htm
    Please notice appendix A; which explains the menu options of the GUI.
    Please consider upgrading the ACNS code of your customer?s CE, due that there are many enhancements and bug fixes on the lastest code 5.5.x.
    Thanks & Regards,
    Jose Quesada.

  • Blank page after connecting via SAP HTML GUI through web vpn

    Hello,
    SAP HTML GUI connection works fine while internally.  Trying to connect via web vpn provides logon screen fine.  After entering credentials, an SAP stlogo appears and immediately changes to blank page.
    Any help is appreciated.

    In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
    To allow your vhost you should add /data/www or set empty value.

  • Html Gui not working

    Dear eXperts,
    i want to enable sap gui for html. For this i've activated the following services from the transaction SICF:
    1). /sap/public/bc/its/mimes
    2). /sap/bc/gui/sap/its/webgui
    3). /sap/public/ping
    Also, on se 80->utilities ive set Integrated ITS under the publish tab.
    after that i've also published "webgui" and "system", as complete service.
    now when i try to Test the service in SICF, the browser says:
    =================================================
    The Web site cannot be found
    The Web site you are looking for is unavailable due to its identification configuration settings.
    Please try the following:
    Click the Refresh button, or try again later.
    If you typed the page address in the Address bar, make sure that it is spelled correctly.
    Click the Back button to try another link.
    11004 - Host not found
    Internet Security and Acceleration Server
    =================================================
    note:
    I've set the domain controller's IP as alternate DNS!
    I've checked the parameter value, and the host name is also correct.
    I don't understand where i've made a mistake. Please help me!
    Thanks in advance.

    Thanks for the quick replies !!
    @Durairaj:
    The browser is showing the correct link since im going directly through the "Test Service" from transaction SICF.
    and yes, i do use the proxy server to connect to the internet. I've tried blocking the Domain Controller IP in the Proxy Exception list, and what i assume by "ABAP host" is DEV (in my case ) so yes, i've tried placing that in the exception list too but none is working
    @henning:
    Im sorry but im a newbie, and i don't know much about icman.However ive tried eliminating the DNS and proxy server too...but the issue is still there.
    I've also tried disabling my proxy in total, but no result.
    @problem:
    Well, i would like to share some thing important here. We have enabled the web gui for Production server, and its working fine. but I'm unable to access that either from my system.

  • CME GUI ISSUE

    Hi ,
    We have a CME set-up for one of our location.
    Since last few days whenever we are trying to access  CME through WEB , we are getting " javascript:void(0)" error.
    No issue with WEB login , but option are not clearly visible once we login.
    If I click on the different options after login into CME WEB , everytime getting the same java error.
    Cisco IOS Software   C3825-SPSERVICESK9-M
    Software Version  12.4(24)T8 / CME 7.1
    It doesn't seem to be PC/Browser specific issue because everyone getting the same error.
    Restarting Telephony services won't able to resolve the issue.
    Any assistance would be highly appreciated.
    Thanks!

    Hello Sandeep
    What is the gui verion? can you paste below command
    show flash | i gui
    also you can please download a new file back from CCO and load it again after deleting previous one. Just a give it shot .
    you can also refer CME version with compatible GUI
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html
    Br,
    Nadeem 
    Please rate all useful post.

  • HP LaserJet p1102w with Mac OS X10.6.8 HTML config issue

    Hello, 
    I have been using this printer for a few years now and have moved house a few times and successfully updated the wireless settings on the printer through HTML config. Lately, in printer utilities the HTML config button does not show up where it is meant to.
    I have installed / uninstalled the latest firmware, software drivers, printers and made sure they were platform specific.
    This is really annoying. 
    Is there old software available for download? it was working fine until the recent update - which I did so I could use the eprint features.
    Best regards
    Costas
    Printer: 
    HP LaserJet p1102w, Firmware datacode = 20130213
    Computer:
    Macbook white, late 2008 model: 2.4Ghz Core2Duo, 4G RAM with OS X 10.6.8

    From the name of the printer, it looks like you have it installed through a USB connection. 
    Here is what I would. First go into “System Preferences” and then select either  “Print & Scan” or "Print & Fax".
    Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.  
    NOTE: This will delete all printers. 
    After you have reset the printing system, let's make sure you have the most recent HP driver package installed. 
    You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
    Once you have downloaded the driver package and completed the installation, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus (+) sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box.  Make sure that says the name of your printer and not AirPrint. Next make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
    This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • SAP GUI issue with Portal on Windows Vista

    Hello.  I am using Windows Vista on my laptop.  We use the portal to access our SAP systems.  I have SAP GUI 7.1 installed on my machine.  When I click my WIN GUI link from inside the portal I get a download file request.  I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open  I am using IE 7.0 as well.
    Please advise if you know how to resolve this issue.
    Thanks,
    Stuart

    try installing patch 5 for  SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

  • SSO to R3 thro ITS notworking(HTML GUI) . SSO working for WINGUI

    Hi All
    We have configured SSO to R3 . The SSO is wokring for Win Gui iviews but for WEB HTML iviews ( thro ITS) the same is not working .
    Any hlp is highly appreciated.
    Regards
    Jayesh

    The best thing to do is perform a security trace in SM50
    open transaction sm50
    press F5
    Ctrl + Shift + F7
    Increase level to 2
    Uncheck the first check box and check security
    Confirm
    Then perform the request through the browser and check the security trace available as a option in the menu in SM50. You will find the cause of the error at the end of the trace
    Regards
    Pran

  • HTML Coding Issues with Dynamic Sites

    I am trying to create a button using the sliding doors technique and I think I have the correct css, but the issue comes with the HTML.
    Here is the CSS:
    .Button
    /* Sliding right image */
        background: transparent url('../Images/button_right_02.png') no-repeat scroll top right;
    display: block;
    float: left;
    height: 38px;
    margin-right: 6px;
    padding-right: 20px;
    text-decoration: none;
    color: #000000;
    font-family: Arial, Helvetica, sans-serif;
    font-size:12px;
    font-weight:bold;
    .button span {
    /* Background left image */
    background: transparent url('../Images/button_left_02.png') no-repeat;
    display: inline;
    line-height: 22px; /* CHANGE THIS VALUE ACCORDING TO BUTTONG HEIGHT */
    padding: 7px 0 5px 18px;
    .button:hover span{
    text-decoration:underline;
    However the HTML is a little bit tricky.  I only get the right side of the image to show up on the button.  Here is the HTML:
    <td colspan=2 ALIGN=center class="button">
           <table BORDER=0  CELLPADDING=3>
    <tr>         
                      <td align=center><input name="Button" type=button class="Button" OnClick=submitScreen(&quot;AccountSummary&quot;) value="Back to Summary"></td>
                </tr>
           </table>
        </td>
    This is what I am ending up with:
    This is what I am trying to get to:
    The latter image I am able to get to with my own HTML that looks like this:
    <body>
    <a class="button" href="button2.css"><span>Account Summary</span></a>
    </body>
    But I need to incorporate that so it works in the above HTML (incorporated with an external database)
    Your help is appreciated.

    Dude I git you ... my template in html is giving me issues also ....
    how come I build it then a moth later it wont allow me to nuild pages from the template???
    also how do I add my picture logo to my account??

Maybe you are looking for