Html Gui not working

Dear eXperts,
i want to enable sap gui for html. For this i've activated the following services from the transaction SICF:
1). /sap/public/bc/its/mimes
2). /sap/bc/gui/sap/its/webgui
3). /sap/public/ping
Also, on se 80->utilities ive set Integrated ITS under the publish tab.
after that i've also published "webgui" and "system", as complete service.
now when i try to Test the service in SICF, the browser says:
=================================================
The Web site cannot be found
The Web site you are looking for is unavailable due to its identification configuration settings.
Please try the following:
Click the Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Click the Back button to try another link.
11004 - Host not found
Internet Security and Acceleration Server
=================================================
note:
I've set the domain controller's IP as alternate DNS!
I've checked the parameter value, and the host name is also correct.
I don't understand where i've made a mistake. Please help me!
Thanks in advance.

Thanks for the quick replies !!
@Durairaj:
The browser is showing the correct link since im going directly through the "Test Service" from transaction SICF.
and yes, i do use the proxy server to connect to the internet. I've tried blocking the Domain Controller IP in the Proxy Exception list, and what i assume by "ABAP host" is DEV (in my case ) so yes, i've tried placing that in the exception list too but none is working
@henning:
Im sorry but im a newbie, and i don't know much about icman.However ive tried eliminating the DNS and proxy server too...but the issue is still there.
I've also tried disabling my proxy in total, but no result.
@problem:
Well, i would like to share some thing important here. We have enabled the web gui for Production server, and its working fine. but I'm unable to access that either from my system.

Similar Messages

Home button in HTML Help Not Working

My Home button in HTML Help Not Working.
Also the Home option from the Options menu does not work. I receive the "This program cannot display the webpage" error.
I have the correct file name (titlepg.htm) in the Advanced Windows Ptoperties "Default" field and the "Home" field. However, I still receive the "This program cannot display the webpage" error.
How can I correct this situation? Thanks, your help is appreciated!

Can you post a couple of screen captures please?
One where you show the Project Explorer with the desired topic in view. Another where you show the dialog where you specify the Home page destination.
Another thing you may wish to try is to define a totally new window, assign the values there and ensure you point to the window in the Single Source Layout recipe.
Oh, and one other thing. Are you using RoboHelp HTML or RoboHelp for Word?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Exporting Crystal Report to HTML is not working in Windows 7

Hi Sir,
I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
Below is the code to Exporting Crystal Report to HTML in VB.NET.
Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
Dim CrFormatTypeOptions          As New HTMLFormatOptions
Dim vFormat As Integer
Dim CrExportOptions As New ExportOptions
Dim vRdReport As New ReportDocument
Dim sfd As SaveFileDialog
Dim vFileName As String = Nothing
vRdReport = vRptSource
sfd = New SaveFileDialog
If Not (vRptPath = "") Then
    sfd.InitialDirectory = vRptPath
End If
sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
If sfd.ShowDialog = DialogResult.OK Then
    ' Set the disk file options.
     CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
Else
     Return
End If
CrExportOptions = vRdReport.ExportOptions
CrFormatTypeOptions.HTMLFileName = vFileName
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLHasPageNavigator = True
CrFormatTypeOptions.UsePageRange = True
With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.HTML32
                    .DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
                    .FormatOptions = CrFormatTypeOptions
End With
vRdReport.Export()
Catch ex As Exception
        MsgBox(ex.ToString)
End Try
Code working fine at Windows XP, But it is not woking in Windows 7 environment.
Please can anyone share your valuable thoughts or ideas reg. this.
Thanks in Advance
Deivanayaga Perumal D.

user13509659 wrote:
Run this code to reproduce the issue.Which issue?
It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
Edited by: jduprez on Feb 10, 2011 1:01 PM

Html is not working properly

i was trying to work on texteditor to code a simple html page but its not working properly like the shows only two color on the background that are green and black
i dont know whats the issue but it use to work fine in mountain lion
i have even tried to use color code still it didnt work then i re-installed the os but the same problem again!
is there any special setting ?
i have change it to plain text and traditional html ..
thank you

Hi,
Do you really think it applies to all these:-
Categories: Accessibility, Boot Camp, Finder Tabs & Tags, iCloud Keychain, iMessage & Messages, Internet & Wi-Fi, Installation, Migration & Setup, Mail, Contacts & Calendar, Maps, Multiple Displays, Printing, Users & Groups, Using OS X Mavericks
Tags:wireless, backup, ical, screen, email, duplicate, printer, preferences, time,
hard, login, restart, vpn, font, dvd, excel, kernel, address, migration, mode, locked,
dvd_problem, hdd, thunderbolt, gray
It would be useful to see the HTML code you are using.
It would also useful to know which version of HTML you are using to do that.
8:57 pm Wednesday; March 12, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Web template with HTML framset not working after transport

Hi,
I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
When looking in transport connection I see the following message:
"Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
Has anybody an idea what could cause this?
Is there a way to regenerate templates (like RSRT for queries) ?
Thanks in advance
Bernd Dümmel
KODAK Stuttgart
using ve created a

Did you upload the video?
Did you provide the correct path to your HTML object?

Links in dynnamic html text not working?...

Hi all
I have a dynamic text field, set to format html.
The link that loads in the dynamic text field is:
<a
href="portfolio_template.php?sec=housing%2F&sub=townhouses%2F&pro=rheingold+gardens%2F&st =2&id=5">Rheingold
Gardens receives 2006 Building Brooklyn Award</a>
It does not work.
If I make a very simple link, like:
<a href="
http://example.com">link</a>
It works.
I have seen in the Flash (MX2004) doc that
"<a href> must be a string, up to 128 characters."
My href string is not longer than 128 chars...
What is wrong?...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Have tried putting
http:// in front of your link?

Html snippet not working; created from Taco html edit Component Library

Ok, I've searched for days on the discussion board for the answer to this one..... hopefully someone can give me a couple of pointers....
I have a component created from Taco html edit Component Library that I cannot get to work as an inserted snippet into iWeb 3.0.2.
Why can't I get this to work? I've seen first hand that they work on someone else's website that she constructs in html directly, not using iWeb. Any help greatly appreciated.
Taco created three files. They are:
TSWAccordion.css
TSWDomUtils.js
TSWAccordion.js
Here is the code:
<html>
<head>
<title></title>
<script type="text/javascript" src="Scripts/TSWAccordion.js"></script>
<script type="text/javascript" src="Scripts/TSWDomUtils.js"></script>
<link rel="stylesheet" type="text/css" href="Scripts/TSWAccordion.css" />

<style type="text/css">
#myAccordion.tswAccordion
width: 200px;
height: 400px;
background-color: #f0f0f0;
#myAccordion .tswAccordionActiveSection, #myAccordion .tswAccordionInactiveSection
background-color: #f0f0f0;
width: 100%;
height: 400px;
#myAccordion .tswAccordionHeader
text-align: center;
padding: 2px;
font-family: Verdana;
font-size: 16.0px;
#myAccordion .tswAccordionActiveSection .tswAccordionHeader
background-color: #7086aa;
color: #ffffff;
border: 1px solid #cccccc;
#myAccordion .tswAccordionInactiveSection .tswAccordionHeader
background-color: #f0f0f0;
color: #000000;
border: 1px solid #cccccc;
#myAccordion .tswAccordionHeader
#myAccordion .tswAccordionBody
padding: 5px;
</style>

</head>
<body>

Title 1

Title 2

Title 3

<script type="text/javascript">
var accordion = tswAccordionGetForId('myAccordion');
</script>

</body>
</html>

You need to upload these three files in a folder to the root folder on your server:
TSWAccordion.css
TSWDomUtils.js
TSWAccordion.js
The folder cannot be named "Scripts" as shown in your code as you already have one of that name.
Say it is named "Accordion". You then need to give the absolute URL to these files rather than the relative one shown in the code....
http://www.yourdomainname.com/Accordion/TSWAccordion.css
http://www.yourdomainname.com/Accordion/TSWDomUtils.js
http://www.yourdomainname.com/Accordion/TSWAccordion.js

html:cancel / not working after changes made as per Steve Muench documen

I have followed the document posted by steve for configuring BC4J to use Struts 1.1 Final.
Once this is done the <html:cancel> button does not work.
This button does two things , it skips the validate method in FormAction and returns true for
isCancelled(request), but both things are not happening.
When i go back to 1.1beta 2 release it works fine,
So it is related to the changes that Steve made in the three files.
BC4JRequestProcessor.java
MultipartUtil.java
UpdateAction.java
Steve could you take a look and fix this issue.
Thanks

more info on isCancelled()
isCancelled(javax.servlet.http.HttpServletRequest request)
Returns true if the current form's cancel button was pressed.
This method will check if the Globals.CANCEL_KEY request attribute has been set, which normally occurs if the cancel button generated by CancelTag was pressed by the user in the current request.
If true, validation performed by an ActionForm's
validate() method will have been skipped by the controller servlet.

Export to exchange folder in HTML format not working

Hi All
I am trying to export report in HTML format directly to exchange folder and sending it as mail. I am using below code for it but it is not working for html format only. I am able to export other formats (rpt, pdf, word, excel...) using below snippet.
Crazy thing is that it doesn't give any error or exception. It just ignores the code. It will great if someone can sneak in below code and point out what I am doing wrong.
Dim destination As ExportDestination = ExportDestination.ExchangeFolder
Dim options As New HTMLFormatOptions
options.HTMLFileName = "report1.rpt"
options.HTMLBaseFolderName = System.IO.Path.GetTempPath()
ExportToExchangeFolder(format, options)
Private Sub ExportToExchangeFolder(ByVal format As ExportFormat, ByVal options As ExportFormatOptions)
    Dim myExchangeOpts As ExchangeFolderDestinationOptions = ExportOptions.CreateExchangeFolderDestinationOptions()
    Dim myExportOpts As New ExportOptions
    myExchangeOpts.DestinationType = ExchangeDestinationType.ExchangePostDocMessage
    myExchangeOpts.Profile = "Outlook"
    myExchangeOpts.FolderPath = "[email protected]#Drafts"
    myExportOpts.ExportDestinationOptions = myExchangeOpts
    myExportOpts.ExportDestinationType = ExportDestinationType.ExchangeFolder
    myExportOpts.ExportFormatType = ExportFormatType.HTML32
    myExportOpts.ExportFormatOptions = options
    report.Export(myExportOpts)
End Sub

Hi Saurabh,
The logic does not make sense.... Open a report up in CR Designer and export to HTML, notice it creates a few folders and a bunch of files, depending on the options you select.
It's not one file so what you should do is export to disk, use a third party API set to zip up the files and folders and then e-mail the zip file to the server/user.
Actually what you should do is not give the users that option, PDF works for viewing through a browser so use it, easiest way to do this.
And because you are attempting to send HTML through E-mail there are all sorts of security issues sending that format and lots of permissions required. Best to avoid it.
Don

Anchor links in HTML newsletters not working in iOS8 and above

I used to receive daily HTML email newsletters with links anchor down to detailed content. The links were working fine in all the previous versions. After upgrading to iOS 8, the internal hyperlinks (anchor links - both named as well as id) are not working. It takes me to nowhere and shows an error message id. This seems to be very specific with iOS 8 and there is no HTML code support to overcome this issue.
Can Apple fix this issue at the earliest as it is very difficult to scroll up and down every time to read the contents of the email newletters?

I used to receive daily HTML email newsletters with links anchor down to detailed content. The links were working fine in all the previous versions. After upgrading to iOS 8, the internal hyperlinks (anchor links - both named as well as id) are not working. It takes me to nowhere and shows an error message id. This seems to be very specific with iOS 8 and there is no HTML code support to overcome this issue.
Can Apple fix this issue at the earliest as it is very difficult to scroll up and down every time to read the contents of the email newletters?

HTML file not working ..!

Okay so i`ve created a website on flash mx , converted it into html .. uploaded on domain on member.webs.com.. here is the link of file nawazbaig.webs.com/website2.html .. it shows up the blank page . ? it is running perfectly fine on my computer.. but on domain it is not working.. here is the code of html
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>website2</title>
</head>
<body bgcolor="#ffffff">


<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="100%" height="100%" id="website2" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="website2.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<PARAM NAME="SCALE" VALUE="exactfit">
<embed src="website2.swf" quality="high" bgcolor="#ffffff" width="100%" height="100%" name="website2" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash"SCALE="exactfit" pluginspage="http://www.macromedia.com/go/getflashplayer" />
</object>
</body>
</html>
" I would really appreciate your comment on this problem..!

relaxatraja may be right, it could just be your path which is wrong.....
But you are already using a "relative" path... so that can stay the same... it just might be the wrong one.
From an old article on pathing:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
Best wishes,
Adninjastrator

Simple 960px html does not work???

I've b een coding pages a while but this has me perplexed.
I have a page with simple code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
#960Wrapper {
width: 960px;
background-color: #0F0;
margin-right: auto;
margin-left: auto;
#header {
background-color: #C9F;
#footer {
background-color: #C0F;
</style>
</head>
<body>
<div id="960Wrapper">Content for id pageWrapper Goes Here
        <div id="header">This area is reserved for logo</div>
    <div id="contentArea">
   <p>Please click a button:</p>
</div>
     <div id="footer">This area is reserved for footer</div>
</div>
</div>
</body>
</html>
However everything is going to full width and edge of the browser - all of them.
Maybe my grey cells are tired - or something is corrupt but the machine does not accept it - in or out of dreamweaver.
I've rebooted - run ccleaner and rebooted again but something is not working for me.
I'd appreciate if someone could confirm I'm not going mad please.
Terry

GROAN!
Forgot about that one - it's as simple as that???!
I had a whole page written and then it stopped working - I've even stripped it back to basics and it was as simple as that???
Thank you very much for pointing this out.
Terry

IWeb HTML Snippet not working!Help!

I am new to building a website but understand where to copy and paste the HTML code to and from. However, everything I have tried will not work in the HTML Snippet. I have spent 6 hours trying to find a way to get it to work. Suggestions???

Anything from Youtube, Vimeo and other sites. Below is one of the Youtube embedded codes.
<iframe width="420" height="315" src="//www.youtube.com/embed/kCZqyWw2--M?rel=0" frameborder="0" allowfullscreen></iframe>
This is the "old" code for the below video.
<object width="420" height="315"><param name="movie" value="//www.youtube.com/v/kCZqyWw2--M?version=3&hl=en_US&rel=0"></para m><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/kCZqyWw2--M?version=3&hl=en_US&rel=0" type="application/x-shockwave-flash" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>
Neither of these will work. The "old" code will make my html box turn white but nothing else happens.
Any suggestions?

Facebook like BOX html snippet not working

Hi All,
Somehting is driving me crazy - I can't seem to add a like BOX to my Iweb page - no problem with the like button, bu I want to use the box because it shows my stream. Facebook generates three codes HTML5, XFBML and Iframe and none of them work... the snippet stays empty and blank.....
This is the code that is generated by facebook:
<iframe src="//www.facebook.com/plugins/likebox.php?href=http%3A%2F%2Fwww.facebook.com% 2Fpages%2Fstarfish%2F88301317903&width=292&colorscheme=light&show_fa ces=false&border_color&stream=true&header=false&height=395" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:292px; height:395px;" allowTransparency="true"></iframe>
converting my URL to the following code (as I have seen elsewhere in the forum) is not working... like this:
<iframe src="//www.facebook.com/plugins/likebox.php?href=http://www.facebook.com/pages/starfish/88301317903&width=292&colorscheme=light&s how_faces=false&border_color&stream=true&header=false&height=395" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:292px; height:395px;" allowTransparency="true"></iframe>
All help is much appreciated!

There are errors in both your original facebook code and the new version you created. Try this...
<iframe src="http://www.facebook.com/plugins/likebox.php?href=http://www.facebook.com/pages/s tarfish/88301317903&width=292&colorscheme=light&show_fa ces=false&border_color&stream=true&header=false&height=395" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:292px; height:395px;" allowTransparency="true"></iframe>

Time Machine GUI not working

I have an odd issue with time machine: it can backup my system to my second drive just fine, but the gui will not load. When I click the time machine icon in the dock it attempts to center the desktop window but then freezes. Thus, it does not load the background so I can view the various backups by time. I'm thinking the issue is due to my old graphics card, since time machine works perfect with my 2 G4 minis. Any help would be greatly appreciated.
My specs are:
Powermac G4 (AGP Graphics)
Sonnet 1.8 Ghz G4 Processor
512 MB of RAM
Sonnet PCI SATA controller card
ATI Rage 128 Pro Graphics 16 MB AGP
HD 1 Seagate 160 GB SATA
HD 2 Seagate 80 GB SATA
Mac OS X 10.5.1

Look at this extract from the definitive Time Machine website:
http://pondini.org/TM/5.html
Ciao.

Html Gui not working

Similar Messages

Maybe you are looking for