HTML Images not showing in Emails
Hi,
Strange things are happening in Mail (Version 2.1.3 (753.1)) on my G5 OS 10.4.11 - images within email are not appearing i.e images of items from companies or newsletter etc only getting '?' marks where images should be.As a side issue I cannot open Safari or do Software Update - all say no Internet connection - I use FireFox mostly 3.03. If I use my MacBook which has Leopard I have non of the above issues - the preferences for Mail are set similar on both Mac's - any suggestions as to what I can do would be appreciated.
Ian
Ji Ian, I was hoping a Mail expert would see this, but it doesn't really seem a Mail problem now that I read it!
Are you saying Firefox works?
2 things to try...
Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Try putting these numbers in Network>TCP/IP>DNS Servers...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger
Similar Messages
-
Certain image not showing in email
This issue happened using Firefox 14.0.1 in Windows7
I have an email that loads several images from a specific website.
All the images load except the company's logo. At first I thought it might be yahoo mail issue. However I tried opening same email in hotmail, it does not show up as well.
I've tried all the solutions that firefox provided ( deleting cache, check media blocked, exceptions etc ) and it still not working. I've even re-installed Firefox.
This problem only appeared on Windows7. I've the same version of Firefox in Mac and it's showing the logo.'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
HTML images not showing in Mail
I've noticed that my images in emails are not loading in 3G or wifi mode. I've checked all settings and rebooted with the same results.
Anyone else experiencing anything similar? I've checked all the server and general mail settings. Gmail fetch/push address.
Thanks.HI Trayce,
Open Mac Mail then from the menu bar click Mail / Preferences then select the Viewing tab.
Select: Display remote images in HTMl messages
Connect your iPad to your Mac. In the iTunes window under the Info tab, scroll down to: Advanced.
Select Mail Accounts. Then click the Sync button bottom right side of the iTunes window.
Restart your iPad. Hopefully images will load on your e-mail.
Also, on your iPad. Tap Settings / Mail, Contacts, and Calendars. On the right make sure: Load Remote Images is turned on.
Carolyn -
Crystal Report Images Not Showing - JSP inside /WEB-INF folder
Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folderHi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>../crystalreportviewers</param-value>
</context-param>
<context-param>
<param-name>crystal_image_use_relative</param-name>
<param-value>web</param-value>
</context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM -
BLOB image not shows in JSP page!!
Hi Dear all,
I had tried to configure how to show BLOB image to jsp page . The code are works fine and servlet works ok but image can not show only. can you help me that what need to be added. Please help me.
Can any experts help me? BLOB image not shows in JSP page. I am using ADF11g/DB 10gR2.
My as Code follows:
_1. Servlet Config_
<servlet>
<servlet-name>images</servlet-name>
<servlet-class>his.model.ClsImage</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>images</servlet-name>
<url-pattern>/render_images</url-pattern>
</servlet-mapping>
3. class code
package his.model;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.Map;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
public class ClsImage extends HttpServlet
//private static final Log LOG = LogFactory.getLog(ImageServlet.class);
private static final Log LOG = LogFactory.getLog(ClsImage.class);
public void init(ServletConfig config)
throws ServletException
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("GET---From servlet============= !!!");
String appModuleName = "his.model.ModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleName");
String appModuleConfig = "TempModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleConfig");
String voQuery ="select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = 'P1000000000006'" ;// 'P1000000000006' this.getServletConfig().getInitParameter("ImageViewObjectQuery");
String mimeType = "jpg";//this.getServletConfig().getInitParameter("gif");
//?IMAGE_NO='P1000000000006'
//TODO: throw exception if mandatory parameter not set
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName, appModuleConfig);
ViewObject vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
Map paramMap = request.getParameterMap();
Iterator paramValues = paramMap.values().iterator();
int i=0;
while (paramValues.hasNext())
// Only one value for a parameter is expected.
// TODO: If more then 1 parameter is supplied make sure the value is bound to the right bind
// variable in the query! Maybe use named variables instead.
String[] paramValue = (String[])paramValues.next();
vo.setWhereClauseParam(i, paramValue[0]);
i++;
System.out.println("before run============= !!!");
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
System.out.println("after run============= !!!");
Row product = vo.first();
//System.out.println("============"+(BlobDomain)product.getAttribute(0));
BlobDomain image = null;
// Check if a row has been found
if (product != null)
System.out.println("onside product============= !!!");
// We assume the Blob to be the first a field
image = (BlobDomain) product.getAttribute(0);
//System.out.println("onside run product============= !!!"+image.toString() +"======="+image );
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if ( product.getAttributeCount()> 1 )
mimeType = (String)product.getAttribute(1);
else
//LOG.warn("No row found to get image from !!!");
LOG.warn("No row found to get image from !!!");
return;
System.out.println("Set Image============= !!!");
// Set the content-type. Only images are taken into account
response.setContentType("image/"+ mimeType+ "; charset=windows-1252");
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[4096];
int nread;
while ((nread = is.read(buffer)) != -1)
os.write(buffer, 0, nread);
//System.out.println("Set Image============= loop!!!"+(is.read(buffer)));
os.close();
// Remove the temporary viewobject
vo.remove();
// Release the appModule
Configuration.releaseRootApplicationModule(am, false);
} 3 . Jsp Tag
<af:image source="/render_images" shortDesc="Item"/> Thanks.
zakir
====
Edited by: Zakir Hossain on Apr 23, 2009 11:19 AMHi here is solution,
later I will put a project for this solution, right now I am really busy with ADF implementation.
core changes is to solve my problem:
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
}All code as below:
Servlet Code*
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
String appModuleName =
"his.model.ModuleAssetMgt";
String appModuleConfig =
"TempModuleAssetMgt";
String imgno = request.getParameter("imgno");
if (imgno == null || imgno.equals(""))
return;
String voQuery =
"select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = '" + imgno + "'";
String mimeType = "gif";
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName,
appModuleConfig);
am.clearVOCaches("TempView2", true);
ViewObject vo = null;
String s;
vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
Row product = vo.first();
BlobDomain image = null;
// Check if a row has been found
if (product != null) {
// We assume the Blob to be the first a field
image = (BlobDomain)product.getAttribute(0);
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if (product.getAttributeCount() > 1) {
mimeType = (String)product.getAttribute(1);
} else {
LOG.warn("No row found to get image from !!!");
return;
// Set the content-type. Only images are taken into account
response.setContentType("image/" + mimeType);
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
is.close();
os.close();
// Release the appModule
Configuration.releaseRootApplicationModule(am, true);
}Jsp Tag
<h:graphicImage url="/render_images?imgno=#{bindings.ImageNo.inputValue}"
height="168" width="224"/> -
Another Images not Showing up thread
I know there are multiple threads out there about images not showing up on the login page of application express, and I have browsed most of them without success.
My images folder is in:
C:\oracle\product\10.1.0\db_1\Apache\Apache\images\
My dads.conf file has specified:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
Address of missing image in I.E. is:
http://<host>:7777/i/htmldb/apex_logo.gif
When I ran @apexins I specified /i/ for the virtual images directory.
I am running Oracle Database 10gR2, with Oracle HTTP Server that came with the Oracle Database 10g Companion CD Release 2.
I am using APEX 3.2.
When I try to go to
http://<host>:7777/i/
I get:
You don't have permission to access /i/ on this server.
I also cannot login to APEX. When I type my username/password and click the Login button, it does nothing (nothing loads, nothing changes... nothing happens). I don't know if this is related?
Thank you,
~TomI found the problem -
In my dads.conf file I had:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
When I really needed:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images/"
Note the end slash after images changed from backslash to forward.
Silly me. -
Images not showing in the jlabel/jbutton
Hello all,
I've a package in which my cards directory is located along with all my src files and compiled classes. All my images ****.gif files are inside this directory.
Then I've following the icon object.
protected static JLabel lblDeck;The following code is used to get the image.
String imgPath;
imgPath = isImageExists("imgBG1.gif");
if (imgPath == "")
{ // If the image of Card Deck(imgDeck) is not Found
lblDeck = new JLabel();
lblDeck.setBackground(new Color(0, 64, 128));
lblDeck.setOpaque(true);
flagImgDeckFound = false;
} else {
// If the image of Card Deck is Found
imgDeck = new ImageIcon(imgPath);
lblDeck = new JLabel(imgDeck);
// Check if the image exists else return "";
protected String isImageExists(String imgName) {
java.net.URL imgURL = getClass().getResource("cards/" + imgName);
if (imgURL != null)
{ return (imgURL.toString()); }
else
JOptionPane.showMessageDialog(null, "File not Found: " + imgURL);
return "";
}I'm still unable to get the image in the jlabel!
When i checked the path, it is exactly returning the path of the file.
But its neither loading the image into the jlabel nor is it returning "".
This is just the label part i've other jbuttons also. Even they are not displaying any images.aLkeshP wrote:
can everyone see this thread?
YES FER-CHRISE-SAKE.
Just how many times do you intend posting the same identical question?
images not showing in the jlabel/jbutton
Problem in imageicon
iconImage on JButton & JLabel
Re: images not showing in the jlabel/jbutton -
PE12 just installed, but Organizer share preference for emailing photos does not show any email preferences except the default Adobe. Have Visa with Windows Mail. Previous PE worked OK. How to resolve?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
I have come across something strange today that I've not seen before. I'm running LR 4.0 under Win7 64-bit. I usually use Photoshop CS6 beta as my external editor, but invoke CS5 when I have to use some tools that don't support the beta. Here is the scenario:
* I have CS5 open
* I externally edit an image in CS5 and Save it from CS5 when I'm done
* The edited image does not show up in LR
* I close LR and reopen it
* There is the edited image!
I have duplicated this many times this evening. I don't think I've seen it when I've used CS6 beta.Something strange is going on because I had the behavior reported of edited image not showing up after using another filter, Nik Silver Efex Pro 2.
-
Mail will not show new emails on my Mac Air but sends OK. Mail server is working
Hello
As I said above, Mail will not show new emails on my Mac Air but sends mails OK. The Mail server is working because my iPad is receiving and displaying incoming messages.
Your advice is most welcome.
Thanks!''LeoJoy [[#question-1058991|said]]''
<blockquote>
Thunderbird successfully displays all of my e-mail accounts in the list of accounts and displays all of the inboxes correctly however it doesn't display the e-mails at my newest address in the unified inbox. To see them, I have to click on that particular e-mail accounts inbox. In every way, this account appears to be set up the same as the all the other ones. The newest e-mail account is a second account through Zoho. What do you think is the problem?
Mac OS 10.9
Thunderbird 31.6
[email protected]
</blockquote>
Thank you. I had to select the search from the menu instead og by right clicking but it worked just the same. -
Outlook Client not showing all emails
Hi,
We have signed up for emails on domains.live.com for the domain name kamtress.com
We setup Outlook clients in our office using IMAP.
But the outlook client does not show all emails and also shows lots of copies of sent emails while we would have sent only one.
Could you please help us out with this issue as to how this can be rectified?
We use Outlook 2013 on Windows 7.
Thank you.Hi,
First of all, please make sure your Outlook is fully patched.
Then, please log on your web mail and check if you can see all your emails. If so, please open your Outlook, go to File > Info > Account Settings > Account Settings > Highlight your Imap account and click
Change > in the Change Account wizard, check how you set the 'Mail to keep offline' slider. Change it to
All and then check if you can see all your emails in Outlook now.
If problem persists, please try to create a new mail profile in Control Panel and set up your IMAP account in the new profile to check if it helps. To configure an email account via IMAP, please refer:
http://support.microsoft.com/kb/829918/en-us
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support -
More than 10 email accounts in TB - Not Showing all emails
Not showing all emails in UNIFIED Inbox Folder
I HAVE SETUP MORE THAN 10 EMAIL ACCOUNTS IN TB. THEN I SENT A TEST EMAIL TO ALL OF MY EMAIL ACCOUNTS.
WHEN I CHECK INBOX OF INDIVIDUAL EMAIL ACCOUNT, THERE IS EMAIL AND SHOWING IN INDIVIDUAL INBOX OF ALL EMAIL ACCOUNTS BUT UNFORTUANTELY IT IS NOT SHOWING IN UNIFIED FOLDER of ALL INBOXES. Unified Inbox Folder of all Emails Accounts is only showing few of them.
PLS ADV.Please don't raise multiple threads for the same problem. Follow up at your OP at https://support.mozilla.org/en-US/questions/1003448.
P.S. Writing ALL CAPS is considered shouting. -
My new mac book air will not show old emails. how can i fix this problem
my new mac book air will not show old emails. how can i fix this problem
The answer depends on a number of factors, such as the following:
If you have more than one email account, does this problem affect one, some, or all of your accounts?
Where did you last see this mail -- in your Inbox(es)? in some other folder(s) outside your Inbox(es)? somewhere else?
How old is the missing email -- yesterday? just before you got the new computer? over a week? over a month? over a year?
How are you reading email -- with the builtin Mail application? with some other mail-reading application? with a web browser?
How do you access your email on the server -- IMAP? POP? Exchange? web browser? other?
What version of OS X is on your new computer -- Mavericks (10.9.x)? Mountain Lion (10.8.x)?
Did you migrate your data and applications from your old computer when you set up your new computer?
For example, if the missing mail is the mail that was in your Inbox before you got the new computer, you are reading it with the builtin Mail via POP, and you failed to migrate data, then the mail was left behind on the old computer. The same would be true if the mail was in "On My Mac" mailboxes and you failed to migrate data. -
My "Sent" does not show the emails I have sent.
My "Sent" does not show the emails I have sent.
Check your quickfilter or folder view isn't set to show only "Unread" messages.
Also check under '''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|<select account>|''' that it is set to save sent messages, and where they are being put. -
Bridge CS6 Output to HTML Gallery - images not showing up
Bridge CS6 Output to HTML Gallery issue - my images are not showing up. The files look the same on the local and remote files. The images populate on the local and not on the remote. Is this a JavaScript problem.
Any help is appreciated.
I've done a work around solution by using Lightroom, creating a quick collection for a custom order HTML web gallery. I would much prefer to stay within Bridge CS6 and have its HTML gallery actually work...Hi AlbiDan,
Its possible that it might be a Javascript issue. I see that javascript is used in the HTML gallery. Did you upload through Bridge or from an FTP client? Do you have the URL for a broken gallery?
-Dave
Maybe you are looking for
-
Problem when creating a customer order (VA01)
I'm trying to create a customer order to sell a material which has serial no. I use transaction VA01.when i wrote the serial no of the material that gives an error "the serial no doesn't exist in SNUM".when i checked that table, i saw that there is n
-
Add a URL to a Calendar event linking to a message in Mail
Hi, Before Mavericks 10.9.5 update, I could manually add a URL in a Calendar event to a message in Mail by doing the following: Show the message's header, Find the "Message-Id: " field, Copy the string after "Message-Id: " surrounded by "<" and ">",
-
What if my itunes library is too big
if i have an Itunes library that is 100 GB, what happens if i have a 16 GB IPad?
-
Problem with specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ "
Noise will appear if specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ " showed on the web page. No poroblem with Asian (CJK) charactor. (symptom as below:) https://www.facebook.com/photo.php?fbid=166744676837352 PC: Toshiba Satellite L365D Video :
-
CS6 crashes after trashing preferences - programs opens but crashes
Hi, there- I'm on a shoot location and really need my CS6 to work ASAP! Thanks in advance. I was using tools and found they wouldn't "let go." What I mean is, say, selecting something, then moving the pointer off screen and clicking, which usually u