Html import from edge not showing on ipad 3

Hi all, i hope someone can help.
I am currently putting together a portfolio of my work in Adobe dps to take to client meetings and show on my ipad 3.
The intro page to my portfolio consists of a full screen animation created in Adobe Edge which i created at 1024 x 768 and imported into my folio which is also set up at 1024 x 768 and the animation looks great on the ipad 3 which has a screen resolution of 2048 x 1536. Further on in my document i show examples of my work and these look a little pixelated (they look ok but im being fussy and think they could be sharper), im assuming this is because they are set for a 1024 x 768 and im running it on a 2048 x 1536 screen. So i started again and re-created my html Edge animation on a document size of 2048 x 1536, created a new  2048 x 1536 folio to import it into. When viewed on the iPad it looks huge, the animation that is supposed to be in the centre of the screen is half cut off in the bottom right of the screen. I tried importing the 1024 x 768 version into the 2048 x 1536 folio and all i get is a black screen.
Im really confused and don't really know what to try next, im not from a web background so my coding skills a minimal.
Any help or advice would be greatly appriciated.
Please note i am importing the html as an article to the folio rather than as a html overlay, also i am not pulising these i am viewing them in content viwer on the ipad.
Thanks in advance
Pie

You should be working at 1024x768 and setting the folio to 2048x1536.
As far as the images, as long as they’re 144 ppi or higher they should be fine.
Try that and let us know.
Bob

Similar Messages

  • Importing from DVD not showing full video

    I'm trying to import a video (VOB file) from a DVD, but the full frame of the video is not showing. The frame size that is importing seems to be importing as a different frame size than the video is and I can't seem to change it. The import seems to be cropping it. If I adjust the size in the Program Sequence window, it is showing the cropped version of the video.
    Can any of the other files on the DVD be imported such as the IFO file?

    ... What other formats can iMovie & iDVD use? What do you recommend? ...just dv. and for stills jpeg, tifff.. and for music aiff, mp3... but that was not your question any other video-codec gets converted/has to be converted...
    ... which are apparently very, very big - one half-hour folder was 6 GB...rule: 1h video = ~13Gb... that is the amount of data on tape... iM uses a digital copy of that. many other codecs do a much better compression, BUT lossy!
    ... many times bigger than it needs to be...no, a video-DVD is meant for playback only...the compression codec just stores the delta(=difference) from frame to frame... for edit purposes, you need the info of EVERY frame on tape...
    ... How should I adjust the settings if I want to get an hour's worth of video & audio on a standard 4.7 GB blank DVD-R?
    ...you don't do settings using iDVD. this app needs a dv stream to work in the highest possible quality. use the export to iDVD feature of iM.
    in case, you spend a few k$, you can buy DVDSP, including a tool called Compressor... after learning a few years to handle it, you can result smaller files with higher quality.....

  • Import from camera not showing preview images

    When I import from my DSLR, I see empty boxes representing all the images on the card but no preview. I'm set to import JPEG and the images are JPEG. I have the option Do Not Import Duplicates turned off. I've tried restarting Aperture (3.1) and even restarting the iMac (10.6.5) but to no avail. Does anyone has any suggestions on how to resolve this?

    Cool this is good, 1 you can still access images and two you have identified Aperture as being the issue. The next step is to do some basic maintenance on your system, have a read of the Aperture 3: Troubleshooting Basics at the following link.
    http://support.apple.com/kb/HT3805
    Trouble shooting is about eliminating possibilities, so step through each of these, although unlikely, it is usually the unlikely causing the issue. If it were obvious you would not have asked the question.
    Tony

  • Songs imported from CD not showing in iTunes

    I have recently started using a new PC, I copied my iTunes Library from my laptop onto the new PC and all songs have transferred across apart from those that I had imported from a CD. Is there an easy way to recover these songs instead of importing all of them again on my new PC?

    Do the non-syncing songs play in iTunes on the computer?

  • .oam file from Edge not showing as loaded cursor in Muse

    My text is animated, shows up properly in browser preview, but when I go to import the .oam file into Muse I get a corner cursor (not loaded) and then an empty box.  No file.
    I've reserved the file several times in Edge, restarted both programs, both are latest version.
    Ideas anyone?

    Hi dparkerseviltwin,
    Does the animation show up, in the Muse "Preview Page in Browser" option?
    Regards,
    Sonam

  • Importing songs from CDs - not showing up in my Library

    I am aving trouble importing songs from CDs.  I completed the process as instructed - using the "import this CD" button (I have done this many times successfully).
    The import process ran OK.  When the Import process completed, I looked in my music Library and the songs were not there.
    I repeated the process - same result.  Nothing in my music library.
    What should I do?

    Re: [iPod classic] - Re: Importing songs from CDs - not showing up in my Library
    Thu, Feb 09, 2012 08:01 PM
    When I load the CD, iTunes recognizes it and asks me if I want to Import the CD.
    When I click on "Import CD", the song titles are retreived and show up.  The iTunes bar at the top of the screen shows "Importing track 1" or "Importing  the song by title".  Each song is imported, and I can see each song being impotrted via the iTunes bar at the top of the screen.  iTunes shows that the CD has been imported, and the system dings when the import is done.
    This is exactly the same as every other time I've imported CDs.  The only difference is that the songs do not show up in the library.
    Thanks

  • Import option is not showing the Data Source created using ODBC

    Hi all,
    I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
    Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
    Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
    While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
    Can some one help me to understand the issue and to solve it.
    Thanks,
    Mithun

    By calling your cellular data provider.

  • Contacts from 2010 not showing info in 2013

    I recently upgraded from 2010 to 2013.  When the contacts moved over i cannot find all of the information like anniversary date that was in the details tab of 2010.  Is there an icon or setting that i am missing to see all of this previous information?

    Hi
    As per the information and details provided by you, Contacts from 2010 not showing info in 2013, then please follow these steps: -
    After switch from Outlook 2010 to 2013, simply press
    CTRL+3 to see an overview of all your Contacts folders. If the folder is there and holds your contacts, then either the folder has not been set as an
    Outlook Address Book or Outlook Address Book Service is broken in your mail profile.
    If the contacts are not in the contact folder, then you either forgot to select the folder when creating an export, or didn’t select the folder when importing the
    PST-File. You can take a fresh copy of your backup or the pst-file that you imported from.
    Then connect to the pst-file in Outlook via:
    File > Open > Open Outlook Data File
    Now, check the contacts folder again. If you did not find your Contacts in that pst-file, you can select them all
    (CTRL+A) and move them (CTRL+SHIFT+V) or copy them
    (CTRL+SHIFT+Y) to your main contact folder.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • I am not able to import a audio CD the import window does not show up

    I am trying to import a music CD but the import window does not show up and the cd does not copy into itunes.

    Hello Kathryn,
    Thank you for the details of the issue you are experiencing when trying to import songs from a CD.  I recommend following the steps in the section titled "If you have trouble importing songs from an audio CD" in the article below:
    iTunes 11 for Windows: Import songs from CDs
    http://support.apple.com/kb/PH12486
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Email address change not showing on ipad after sync

    iTunes email address change not showing on ipad after sync

    So change it.
    Open iTunes, scroll to the bottom of the main page, tap your account name, log out then sign in with the correct name.

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • Shared folios not showing on iPad

    I am teaching a class and have asked my students to share their folios with me so we can view and interact with them on a projected iPad. When I log into the Folio Producer, I see twelve student projects. However when I sign in to the Content Viewer on my iPad three of them are not showing up for download. I can see them in the browser and look at their pages if I open the folio.
    Why can't I get these to show on my iPad (it's a pretty new retina display iPad).
    I have a final critique at 1:00 today, so I'm in a hurry!
    Thanks

    Check the sizes of the folios. If it is more than iPad 3 size it will not show on iPad. Preferred folio sizes are 1024x768-iPad2 and 2048x1536-iPad3. You can see iPad 2 content on iPad 3 but you can not see iPad 3 content on iPad 2.

  • All mails not showing on iPad

    Emails not showing on iPad. I have ticked show last 200.

    Hello jmcole1,
    Welcome to the Apple Support Communities!
    I understand that some of your TV Shows are not showing on your iOS devices after updating to the latest iOS version. I also understand that you have performed some great troubleshooting steps already. In this situation, just to make sure all suggested troubleshooting steps for this situation have been completed, I would suggest working through the information in the attached article. 
    Troubleshooting Home Sharing - Apple Support
    Have a great day,
    Joe

  • Itunes store does not show on ipad when i launch app its pages are blank

    itunes store does not show on ipad when i launch app its pages are blank

    This indicates there might be an issue with the time configuration on the device.
    Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
    Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
    If issue persists, switch Set automatically back to on, and if not resolved then restore the device.

  • Itunes is not showing my ipad as a device anymore, i deleted itunes and reloaded, it showed up for awhile, said it was restarting my ipad and now is not showing up again, any ideas??

    My itunes is not showing my ipad as a device anymore, i uninstalled itunes and reloaded, the ipad showed up for awhile, as updates were happening, it then said the ipad was restarting and now it is not showing up again, any ideas?? I was trying to sync my calendar and contacts which worked perfectly last time. Now when I plug in the ipad it brings up adobe photoshop album start - photo downloader and looks like it is trying download photos as if it is only seeing the ipad as a camera. very frustrating!

    Windows ONLY sees iPads and iPhones as a camera.  This is nothing new or different.
    When you open iTunes and connect the device, does iTunes detect the device?
    Have you tried a different USB port? Restarting the computer? Restarting the device?
    Frankly, uninstalling and reinstalling iTunes is a bit of a drastic step as it was likely unnecessary.

Maybe you are looking for

  • How to remove frozen iCloud Tabs after iPad restore?

    Hello, Recently I had to restore my iPad on iTunes and used a fresh iCloud backup. At that moment, there were 4 tabs opened in Safari. After restoring, my iPad has shown those tabs in iCloud Tabs without any opened tab on any device. Can anyone help

  • Date formatting.

    I have Dates in a string field I need to reformat and print out. ex.. I read in: "20020708" as a string which should output JulY 8, 2002 String myDate = "20020708"; SimpleDateFormat dateFormatter1 = new SimpleDateFormat "yyyyMMdd"); String dateString

  • Switch statement to java string

    Hello! I am programing a form in jsp that will send an e-mail to different people , depending on the selection of a SELECT box. I am using a Bean which will take the option chosen in the select and then prepare the message. My problem is that the opt

  • Saving only PNG in Lightroom 4

    Hello, I finally have the plans on how I am going to manage my images, but I am curious why Lightroom saves both JPG and DNG after it imports them. My camera(Canon 7D) is configured to save both JPG and CR2.  When I import them, in the import window,

  • ICloud hacked, what do i do now?

    I received an email saying i needed to verify my apple id so i clicked on the page and entered in my password and username Then i realised it is a spam site. Im in the uk and its currently 22.05pm No apple support teams are open for me to ring in thi