HTML input textarea causes problems

Hi,
I have a textarea on my form where the user will have the opportunity to enter a paragraph of text, where he can use HTML tags and whatever. But as soon as I enter html tags into this area, the formfileds coming after this textarea cannot sent their parameters to the next procedure. No html tags, everything works fine.
Any idea?

Hi Nilay,
I don't think the textarea has anything to do with your problem. I just tried out and it works fine for me (at least with the italic and strong tags). Could you provide some more information on your case? (HTML source, the way you process the parameters, etc.)
Peter

Similar Messages

HTML BEE replacement causes arrow key problems

Hi all,
I've got a BSP application with a tableview where some of the columns need to have input fields. I'm using a tableviewcontrol and I have an iterator that replaces certain columns with HTML input fields. I've noticed that when I have the cursor inside one of the input fields and I press one of the arrow keys, instead of moving the cursor within the input, it moves the cursor over to the next cell on the table. I'm not sure at what point it started happening, whether it was when I introduced the tableviewcontrol or when I started using HTML bees to replace the cell. Any info on this would be appreciated. Thanks in advance.
Regards,
Marcos Suero

Figured out the answer myself. In the onKeyDown event of the input field, I set event.cancelBubble to true when navigation buttons are clicked. This stops higher level onKeyDown events from processing.

Assigning html input value to a jsp variable

I have the following problem: I need to assign the value of html <input> field to a jsp variable. This should be done without submittion of the form.
<form name="main">
<table>
<tr>
<td><input type="text" name="gantry" value="123"></td>
</tr>
<table>
</form>
Is there any way to access main.gantry.value from jsp and assign it to a variable? I tried
<% prevGantry = main.gantry.value; %>
but it didn't work, and the problem is not with parsong or initialisation. Please, can anyone help?
Best regards, SoVa.

No it can't be done. You are mixing up java with javascript.
Java/JSP runs on the server end. Generates an HTML page and stops running.
The page loads in the browser, and and can run javascript locally.
The only way to run java code again is to go through the request/response process. ie submit a form, click a link, make an Ajax call...
The only way to get a field from the screen into a java variable is via request.getParameter().

How to force focus last focused HTML input element when going back in history with backspace?

SUMMARY: I am a Firefox user with HTML knowledge. I want to be able to configure Firefox to behave in a special manner when I hit backspace. It's something that Firefox already does, BUT NOT ALWAYS. I don't know why it behaves differently in different situations for no apparent reason. I want to be able to configure firefox to ALWAYS behave in the manner I want to. Read below for the precise description.
When I fill a FORM in a page, wether POST or GET, and press ENTER, it obviously acts as expected: submits the data and brings me to a new page. When I get to the new page, and I press BACKSPACE, Firefox behaves in sometimes like TYPE 1 and sometimes like TYPE 2 (see below), and I can't predict which one he will choose. I want to be able to configure it to behave ALWAYS like TYPE 2.
TYPE 1 - Firefox reloads the previous page, as if I just entered it for the first time.
TYPE 2 - Firefox brings me back to the exact same page view I had before pressing ENTER to submit the FORM.
2.1 - It doesn't reload the page;
2.2 - It places the page in the same scrolled position I was before (for example, if I scrolled to the bottom of the page to fill the FORM and press enter, after pressing backspace it brings me to the bottom of the page again;
2.3 - It automatically focus the HTML input element I last typed (the element that was focused at the very moment I pressed ENTER to submit the FORM).
So, I want to be able to configure Firefox for it to ALWAYS BEHAVE LIKE TYPE 2 whenever I fill a HTML FORM, press ENTER and press backspace after going to the new page. All three details I gave are important. Remember that I've already experienced TYPE 2 in previous versions of Firefox, I just wish to FORCE IT to behave like that ALWAYS (because for no apparent reason, sometimes it behaves like TYPE 1 instead).
Please let me know if that's possible, and if not, I would really THANK YOU ALL FOREVER if you add this feature to the next version.

It's set to true.
I saw the add on you suggested, but it does not fulfill my needs.
I like the behavior exactly as I said because, after submitting the form, I want to be able to look something in the new page and quickly get back to the form, change the text I wrote in the input element and submit it again, in a matter of one or two seconds only...
I was able to do that whenever firefox behaved like TYPE 2 (explained above)...
Thanks for the reply but didn't solve my problem yet...

A larger Edit HTML input window in Muse, please.

Since Muse is great for designing, but a bit limited in features,
once in a while a lot of code is needed to get what you want.
I'm happy to work on a 30" monitor.
But Muse gives me an unstretchable window for HTML-input.
So I can only see 15 lines at a time. Why not give us the possibility to scale it?

have to restart my phone everytime this problem occurs
Can't you find a way to Unzoom it? <eg>
BTW in MUF IE double tap seems to be an unoptionable default method for getting a Zoom. Almost as if they were trying to give non-Multi-Touch users semantic zoom? It is a nuisance but for that another double tap or two-finger pinch
acts as a zoom out. I have tried playing with the Tablet PC Touch settings for Double-tap and Press-and-hold recognition to no avail. That double tap in MUF IE is completely independent of the things that it is trying to emulate. I wish
they would have an option for it or at least not bother providing it to users who actually have Multi-Touch capability.
FYI
Robert Aldwinckle

Adobe Reader 9.3.3-CPSID_83708 is causing problems but ADD/DELEATE will not allow me to deleate. Why

Adobe Reader 9.3.3-CPSID_83708 is causing problems but ADD/DELEATE will not allow me to deleate. Why

Do you have admin rights on your system? Can you uninstall other programs?
If yes and you still think you have downloaded wrong update, use windows cleanup utility to remove this installation. You can find cleanup utility at several websites eg.
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html
Then reinstall 9.3 Reader from adobe website and update it to 9.3.3 using Help>Check for updates.

Did enabling feedburner after submitting my podcast cause problems?

My podcast was submitted at http://www.audiotim.com/rss.xml, but since then I created a feed on feedburner at http://feeds.feedburner.com/AudioTim
My two problems so far are that when I created my profile on feedburner for this site I added category, subtitle, etc but that isn't showing up on the itunes page; and secondly, I now have a weird message on top of my second post that reads:
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
I'm not sure if enabling feedburner after submitting caused either of these problems, but can you explain to me how to correct these two errors? I've read the http://www.apple.com/itunes/podcasts/techspecs.html page, but man is that confusing in regards to submitting metadata such as category, subtitle, etc.

iTunes is looking for the feed at http://www.audiotim.com/rss.xml , which you have removed. What is displayed in the Store is cached from that feed, and won't be updated again unless you restore it. If you want to use the Feedburner version then you need to restore the original feed, and add the following tag in the top section (between the 'channel' tag and the first 'item' tag:
<itunes:new-feed-url>http://feeds.feedburner.com/AudioTim</itunes:new-feed-url>
You should leave the old feed in place for a couple of weeks.
As to the mysterious message, this was in the original feed and is in the present one. It's something you've put there yourself, though I can't say how. Sometimes people use a word processor to create a feed or its contents and this causes problems with the hidden commands - you should use a plain text editor. If you've created this feed by submitting data to Feedburner and letting it write the feed, rather than simply submitting the original feed to Feedburner, you will need to find the pace where you entered this info, delete it all and write it in again.

I have 2 Adobe IDs and I think its causing problems. How do I delete the redundant one?

I have 2 Adobe IDs and I think its causing problems. How do I delete the redundant one?

I don't think you can... you will have to have an employee delete/merge for you
Adobe contact information - http://helpx.adobe.com/contact.html may help
or
Change Account https://forums.adobe.com/thread/1465499 may help
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

Input multiplexer settling problem

NI Multifunction Cards have often a multiplexer before the A/D converter, which allows scanning multiple channels. NI observes that the settling time of this multiplexer may cause problems, especially when an input signal has a considerably higher amplitude than the nearby signal. Here the setlling time does not allow fast scanning because this results in "noise" on the smaller signal due to "memory" of the large one.
Is there a known solution to this problem ?
I tried to keep source impedances around 1 KOhm as suggested by NI, but this did not yield to a complete solution, rather to a slight noise reduction.
Is there a known way to use multifunction NI cards for input scanning with no inherent noise channel-by-channel ?
Thanks a lot
for attention,
Marco
Marco Sartore
ElbaTech srl
Via Roma, 1 57030 Marciana (LI)
Italy

Marco,
There are a few solutions that can help with the charge injection problem. The optimal solution is to decrease the impedance of your sources. The smallest source impedance is ideal. So, if you have sources at or above 1 Kohm, it would be good to use a unity-gain buffer to decrease the source impedance.
Other solutions involve increasing the inter-channel delay of scanning and/or grounding channels in between channels to allow the multiplexer to discharge. I have linked a couple documents below that go over charge injection in detail and the viable solutions.
How Do I Create a Buffer to Decrease the Source Impedance of My Analog Input Signal?
http://digital.ni.com/public.nsf/websearch/CF83426BC3AC514A86256C10005A4771?OpenDocument
Using a Unity G
ain Buffer (Voltage Follower) with a DAQ Device
http://zone.ni.com/devzone/conceptd.nsf/webmain/CD57A73721E0612586256BAE0055CDD9?opendocument
Regards,
Todd D.

Firefox causing problems with web pages and Yahoo

Firefox has been causing problems with:
Yahoo: no matter how many times I reset the font size, it is always much bigger. Also the "From" box (where my name and email address appear) has shrunk;
This does not happen in Chrome
A particular website has suddenly stopped working: http://explore.org/#!/live-cams/player/kitten-rescue-cam
Instead of seeing what is going on on the live cam, all I get is a green screen.
This does not happen in Chrome.
I have followed all the instructions:
- Reset Firefox
- Disabled and re-enabled add-ons
And yet this has solved nothing. Iam now having to run both Firefox and Chrome at the same time. This is highly frustrating. I like Firefox better than Chrome but problems are mounting up and I do need help.
Has any one got some idea what is going on?
Many thanks...
Anna

Hi
Thank you for your input. I did try Font size, reset, zoom... the lot and nopes it did nothing. As I said the problem is in Firefox, not in Chrome.
I also checked the plug-ins issue and it seems they are in order and up to date.
Now this morning, the website has been working again in Firefox (was working ok in Chrome).
Overall Firefox's performance with some websites is poor. My health report confirms the number of times it crushes (many times a day, which is highly frustrating). I am keen to keep Firefox as it is so mcuh nicer in many ways than Chrome but it's performance is an issue for me... sigh...

Upgrading to 10.5 causes problem with Entourage

I have a problem which I believe to be a Mac OS problem even though it affects Entourage v.X. After upgrading the OS from 10.4 Tiger to 10.5.8 on a PowerPC Mac, Entourage crashes when opening mail that contains complex html. This only happens with the main user account and never happened before the upgrade. Email that only contains text and URL links opens OK. Logging out and back in to a new User, I am able to open and view the same emails that caused problems with the main user.

Generally when an application crashes in one account but it does in another account that indicates that something in the account where the application crashes is corrupt.
You have two choices then. You can either find out where the corruption is located and repair it or if that is too bit of job you can switch accounts.
Allan

Null values from DB2 cause problems

Hi,
I have another problem with database link to DB2 using IBM iSeries Access for Linux on 64 bit OEL5 with Oracle Database gateway and unixODBC 2.2.14.
DB link works. However, null values from DB2 cause problems. Date columns that are null on db2 return a date '30.11.0002', and character columns that are null return an error ORA-28528: Heterogeneous Services datatype conversion error.
isql returns correct results.
How can i fix this? Perhaps set some parameters for data conversion on the gateway?
Thank you.

If the driver is not fully ODBC level 3 compliant and misses functions, we're lost. But sometimes the drivers are ODBC level 3 compliant but miss the correct 64bit implementation. In those cases we can tell the gateway to use the 32bit ODBC level 3 standard by setting in the gateway init file:
HS_FDS_SQLLEN_INTERPRETATION=32

I want to uninstall ReloadEvery as I think it is causing problems however it is not in my list of Extensions or Plugins yet it is clearly installed, I tried reinstalling FF but it was still there! How can I get rid of it?

I installed ReloadEvery a while ago and it seemed to be working fine however I am now having problems with FF crashing and weird things like pages not reloading and not being able to use the back button etc
I have already tried uninstalling and reinstalling FF and upgrading to FF 4.
When I upgraded to FF 4 I was still having problems even though I didn't have any Extensions installed at all, or so I thought. I noticed that ReloadEvery was still installed. I was rather puzzled as I had done a clean install of FF 4. I want to remove ReloadEvery to see if it will solve my problems.
I have also tried following the help on the FF Troubleshooting about manually uninstalling Extensions but again ReloadEvery not listed there yet I am still able to use it in FF!
I want to get rid of it!! I really need some help please.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies

FF 3.6 AND 5 on same Mac, 1 profile - can I uninstall 5 without causing problems running 3.6 or with the profile?

I upgraded from 3.6.16 to 5, but don't like how 5 handles tabs (auto reloading 'problem loading' tabs when internet connection is reestablished). So I installed 3.6 in a separate folder, e.g. both versions are on this computer. I went back to using 3.6, and let it upgrade to either 3.6.18 or 19 (don't recall which & it's not open right now). I'm having problems with it using too much CPU & Memory, and not sure if that's a difference between 3.6.16 & 3.6.18/19, or if having 5 on the same computer even if closed could be causing the problem.
Can I uninstall 5 without causing problems with the 3.6 version and the single profile?

If you haven't tried this, give it a try. It worked for me, hopefully it will work for you. In your version 3 firefox, disable all extensions, I had two plugins (doubletwist and joost, disable those if you have them). Then install firefox 5 by overwriting your version 3 firefox. It should work fine after that. I tried everything before, I gave that a last ditch shot. Oh yeah, before you install firefox 5, clear your cache of everything just to be sure.
Hopefully that helps.

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

HTML input textarea causes problems

Similar Messages

Maybe you are looking for