HTML not showing up

For some reason, on my MacBook, some html messages don't show. I have the box checked in the preferences for it. At work, I have an iMac, and I've never had the same problems that I have on my MacBook. I am pretty sure that all the settings are the same. For instance, a html message will show up on my iMac, but won't show on my MacBook. Doesn't make sense to me and it bothers me. Any information would be beneficial. Thanks.

Have you done these two lately & rebooted after the second one?
Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
http://docs.info.apple.com/article.html?artnum=302672
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751

Similar Messages

Rendered html pages in results file(html) not showing the images of origina

hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthi

By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel

Inserted html not showing in Internet Explorer

Inserted html code does not show in internet Explorer 8. Is OK with Firefox, Safari and Chrome. Site is munroestudios.com. Also made a a test page with just the html on munroestudios.com/test.html. This is a iframe code received from another company to link to another site.

I'm not sure what they did but the company supplying the html code fixed something on their end. Works now.

Chinese fonts in html not showing up properly sometimes

I have the following lines in my program :
JLabel A_Label=new JLabel("<Html><Font Size=3>\u8F93\u5165</Font></Html>");
JPanel A_Panel=new Jpanel();
A_Panel.add(A_Label);
Sometimes the Chinese shows up correctly, but sometimes it shows up as blank rectangles, if I change the font size to 5, it will always show up, why ? How can I make it always show up in size 3 font ?
Frank

Hi, thanks for replying.
I know it works for JLabel without html, but I need to display a lot of information in the label, there are formatted tables, different size fonts, html input fields, etc. , so my only choice is to use html to format them.
I found it has something to do with the power of the PC running it, isn't it strange ? When the program starts, it needs to initialize, takes a while, from a few seconds to half a minute, sometimes if it didn't have a lot of data to load, the fonts shows up correctly, other times when it takes a while to load a lot of data before it displays the html formatted JLabel, the fonts may not all show up correctly. Size 5 always shows up correctly, the size 3 & 4 font sometimes could show up as blank rectangles.
I wonder if there is anything I can do in my program to stabilize this when I use html in JLabel ?
Frank

Embedded html not showing up in firefox 18 on Mountain Lion.

Very simple embed code I'm using to get around the lack of support for tables in muse.
Works fine in safari and chrome, but firefox tells me "A plugin is needed to display this content"
Of course, no such plugin exists, or should be necessary. Anybody got an idea how to circumvent this issue?

Hello,
You're correct in saying that, it shouldn't ask for plugins for allowing tables. Please provide us with the page URL where you get this message, for us to replicate this on our end.
Also, if there is any other details on findings about the issue, please share that as well.
Cheers,
Parikshit.

Elements do not show up in edge file but they do in HTML file; no errors occured

I am a senior in college working on building a website for a fictional company for a year-long thesis graphic design project. In my class last semester, I learned how to use Edge Animate and created an 11 page website without any trouble. I had always kept the files saved to my flash drive, and kept a backup on my personal laptop as well as on my external hard drive. There was also a backup of the files on a disc that I turned into my professor in mid-December. All of these files worked fine at the time.
In early January, I wanted to make changes to the website so I installed a trial version of Edge Animate on my laptop. When I opened any of the edge files from any of the backups, the stage was blank and the animations did not show up on the timeline. The elements of the website still show up in the Library but they are no longer arranged on the stage. When I got back to school at the end of January, I tried opening the files on the school computers and had the same problem. I asked my professor to try the file that was saved to the disc and he encountered the same issues on his computer. All of these computers are either iMacs or Macbook Pros.
I have not recieved any error messages and did not do anything to corrupt the files or save over them. I am able to open the html files in a browser with no issues; all animations and images work fine. The only change I can think of is that Edge may have been updated over break and when I installed the trial version I installed a newer version, and for some reason the new version of the program could not properly load my project that I started on a older version in October or November of 2013.
I am happy to upload the files but I am unsure how to do that. Please let me know if there is a way to resolve this issue, or will I have to start over?
Thank you!

Try to clear your preference and restart your Animate.See if that fixes your problem
http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
If that does not work see if there is a lloopback address lookup.
Check out the correct answer in this post to fix that http://forums.adobe.com/message/6116991
Let us know if this fixed your issue

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Some of the images are not showing up on my Blogger blog even though the HTML is there. They do show up in Opera.

Here is the link to the blog post -
http://happyholidays-blog.blogspot.com/2010/09/welcome-to-trick-or-treat-street.html
Three days ago I went to a post from last year and an image was gone. The code was there but not the image.
It doesn't get rid of all the images just certain ones and they are consistently gone. It is not a random deletion of images.
I have had images not show up on other blogger sites.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions<br />
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the <i>Media</i> tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Issue in Lion re Graphics Not Showing in html Email Signature

After I upgraded to Lion, I created an html signature with the graphics portion residing on Dropbox, and it worked without a hitch until about 10 days ago. Then a question mark in a blue square started appearing sporadically in place of the graphic. Now, in place of the graphic, I'm getting that question mark in a blue square 100% of the time in place of the graphic on Dropbox. The .webarchive file in my -/Library . . . mail/signatures folder that no longer reveals the graphic in my emails, however, works fine when opened up in Safari. I've tried rewriting the code, but it's of no avail. The files open up beautifully in Safari with the graphic, but in the signature box in Preferences and in the emails themselves, it's that blue box that keeps showing up. Does anyone have any idea why I'm not able to access my graphic from mac mail and how I can fix the problem?
Thank you very much in advance for your assistance.

As of two days ago, I am having basically the same problem as described:
imap account on my University, it always synced just fine with my iphone. Two days ago it stopped pulling new messages from the server, and moreover, it also does not show the recent ones it showed already, but only shows me approx. 100 really old messages (6 month old).
Whenever I sync, it pretends to do it (sync date gets updates), but it does not fetch the messages.
On my desktop and on my ipad2 (EXACT SAME SETTINGS), everything is ok, messages are pulled from the server (just as it was ok on my iphone two days ago, and I did not change anything).
When I go to the desktop, and move a new message (one this is not showin up on my iphone) to a subfolder of inbox or to the trash folder, then I suddenly can see this message also in the subfolder or in the trash on my iphone.
I have deleted the account and set it up anew, same result: the same 6 month old messages get uploaded, and that's it. I can delete also these old messages, and then they are gone, but also this does not pull up any additional messages.
Any ideas?
Oliver

Bridge CS6 Output to HTML Gallery - images not showing up

Bridge CS6 Output to HTML Gallery issue - my images are not showing up. The files look the same on the local and remote files. The images populate on the local and not on the remote. Is this a JavaScript problem.
Any help is appreciated.
I've done a work around solution by using Lightroom, creating a quick collection for a custom order HTML web gallery. I would much prefer to stay within Bridge CS6 and have its HTML gallery actually work...

Hi AlbiDan,
Its possible that it might be a Javascript issue. I see that javascript is used in the HTML gallery. Did you upload through Bridge or from an FTP client? Do you have the URL for a broken gallery?
-Dave

Applet not showing in HTML!

Hi all,
For some reason my generated HTML page will not show the applet it is meant to load.
The same HTML file loads simply in the appletViwer though and also in Net Beans!
Any ideas what I can do?
Heres my HTML code, is there something wrong with it?
<html><head><TITLE>Applet HTML Page</TITLE></head><body><h1>crossword v1.1</h1><H3><HR WIDTH="100%">Applet HTML Page<HR WIDTH="100%"></H3>
<p>
<applet code= "crossword4.class" width=500 height=550>
<param name = "one" value = "Erroneous">
<param name = "two" value = "Sightseeing">
<param name = "three" value = "Ambivalence">
<param name = "four" value = "Laborious">
<param name = "five" value = "Secateurs">
<param name = "six" value = "Wonderful">
<param name = "seven" value = "Elf">
<param name = "eight" value = "Inflect">
<param name = "nine" value = "Reeks">
<param name = "ten" value = "Note">
<param name = "eleven" value = "Encum">
<param name = "twelve" value = "Ocean">
<param name = "thirteen" value = " ">
<param name = "fourteen" value = " ">
<param name = "fifteen" value = " ">
<param name = "sixteen" value = " ">
<param name = "seventeen" value = " ">
<param name = "eighteen" value = " ">
<param name = "nineteen" value = " ">
<param name = "twenty" value = " ">
<param name = "twentyone" value = " ">
<param name = "twentytwo" value = " ">
<param name = "twentythree" value = "Ectopic">
<param name = "twentyfour" value = " ">
<param name = "twentyfive" value = " ">
<param name = "twentysix" value = " ">
<param name = "twentyseven" value = "Containing error (9)">
<param name = "twentyeight" value = "Needing or showing much effort (9)">
<param name = "twentynine" value = "Change the pitch of a voice in speaking (7)">
<param name = "thirty" value = "_____ber, to be a burden to (5)">
<param name = "thirtyone" value = " ">
<param name = "thirtytwo" value = " ">
<param name = "thirtythree" value = " ">
<param name = "thirtyfour" value = " ">
<param name = "thirtyfive" value = " ">
<param name = "thirtysix" value = " ">
<param name = "thirtyseven" value = " ">
<param name = "thirtyeight" value = "Away from its normal position (7)">
<param name = "thirtynine" value = "Visiting places of interest (11)">
<param name = "fourty" value = "Having conflicted attitudes or feelings toward something (11)">
<param name = "fourtyone" value = "Clippers for pruning plants (9)">
<param name = "fourtytwo" value = "Extremely good or remarkable (9)">
<param name = "fourtythree" value = "Tiny being in the form of a human, usually full of mischief (3)">
<param name = "fourtyfour" value = "Smells strongly (5)">
<param name = "fourtyfive" value = "Brief written record of something (4)">
<param name = "fourtysix" value = "Large expanse of sea (5)">
<param name = "fourtyseven" value = " ">
<param name = "fourtyeight" value = " ">
<param name = "fourtynine" value = " ">
<param name = "fifty" value = " ">
<param name = "fiftyone" value = " ">
<param name = "fiftytwo" value = " ">
</applet></p><HR WIDTH="100%">The source.</body></html>

I think it crashes because one of your parameters is wrong.
Without the applet and or a full trace I don't know.
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences.

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences. Is there a solution to this issue?

I've seen the opposite issue. My wife recieved an email with jpg attachments. She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app. I had her forward the email to herself and then they showed up. I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
So yeah. Seems like some bugs. Hope Apple fixes them soon.

Not showing image in basic copy gif image icon and place on html page

Trying to do a basic copy gif image icon and place it on a basic html page.
The image shows up in my local page and shows on remote side but when I go to view in browser it does not show as a image. It shows the border but no image.
The directions were (working with windows xp and IE8)
Download the image to your C:\temp folder.
4. Copy the gif file from your C:\temp folder and paste it in the same folder where your .html or .asp file is.
I copied the image with right click save as in many different areas of computer. I even put on desktop.
I add image and it shows on the site I am working in but when putting to remote side it does not view as an image on the browser.
I have cleared cashe as well as pressed cntrl/refresh and still nothing.
Other images work and show.
on-line-vacations.com
Thanks!

Basic assumptions:
You have Defined a site.
All files reside within the defined site (including image files)
All files use the appropriate file extensions, for example, image.gif
You have saved and uploaded all site files to your server.
You are EXACTLY naming the source image (no errant capital letters) in the link.
If your other images are linking properly and showing, delete this image and insert it again (or re-link it to the image file within your site structure).
Z

My html table is not showing on the 2nd tab panel (muse widget)

The same table works just fine on the first tab however when I try to click on the second table in browser mode or preview page on browser, my table does not show up. Any tips for fixing this issue?

If I get this right, you're using the Tabbed panel widget to display a HTML table in each of the tabs. If that is the case, please make sure you insert the HTML content on each the tab's content area respectively. In order to verify this, switch between the tabs in Design mode to check your content.
Thanks,
Vinayak

Topic headings not showing in Firefox, with RoboHelp HTML version 8 WebHelp

1. I have just upgraded a customer's Help project to RH8, with a WebHelp layout.
The finished WebHelp Guide works fine in Internet Explorer 8.
But Firefox 3.0.1.5 (latest update) does not show topic headings (style Heading 1) where they are automatically linked to the Topic Properties > Topic Title.; i.e. the topic heading is a Field {Title}, using rh-variable_start name="title" etc. Firefox only shows the topic heading if the heading exists as text in the WYSIWYG field.
I checked a backup copy of the compiled WebHelp that I had generated using RoboHelp HTML version 7, and this works OK - all topic headings that are fields display OK in Firefox.
2. Also, some images (.gif format) do not display in Firefox that is generated by RH8.
Any ideas, anyone?
Philip

Hi,
Note: All I post here are my findings. I didn't test all DHTML effects and I'm not a javascript guru, so I may be wrong.
As far as I can find, this behaviour is defenitly a bug, although it's not related to headings, CBT's or images. This is what I found:
Whenever you have multiple DHTML-effects that kick in on load, Firefox only displays the one that is defined first in the topic. In the bottom of the topic, you'll find a script like this:
<script type="text/javascript" language="JavaScript1.2">//<![CDATA[
    if( typeof( InitEffects ) != 'function' ) InitEffects = new Function();
    InitEffects('img1','x-on-pageload: fadein();');
    InitEffects('h11','x-on-pageload: fadein();');
    InitEffects('h111','');
//]]></script>
In this case, the image with id img1 is loaded first and displayed correct. All subsequent effects (heading with id h11) is not displayed. Putting the heading in front of the image will show the image, while the image is not displayed.
I suspect that the effects are not correctly parsed into
if ((gbBsNS6)&&(srcObj.addEventListener))
        srcObj.addEventListener( noOn.toLowerCase(), new Function("event", newHandler ),false);
on line 2994 and 2995. Changing or deleting line 2995 effectively removes kills on load effects (ie not showing anything with an on load effect) as expected.
If you also use DHTML effects and find the same behaviour as Philip, please post a bug report.
Greet,
Willam

HTML not showing up

Similar Messages

Maybe you are looking for