HTML output on NT and solaris are diffierent for a report

Hi,
I have created a report on win2000
and did the deployment on Solaris box.
When i call a report from a nt box HTML
looks fine but if i call same report from solaris box the font size is changed and also the formatting.
This also affects the PDF format.
Any help will be highly appreciated.
Shailesh

hello,
when moving form NT to UNIX (or vice versa), you have to take in
account, that the fonts you were using on one plattform might
not be availble on the other one.
for that reason, reports provides you with font-substituion
functionality in form of the UIFONTS.ALI file, where you can
define substitution rules. if you have not set up this file, the
fonts will be substituted by a default font, which most likely
will not be the same metrics as your original font.
but be aware, that the metrics of fonts are different, so you
might want to check which font on plattform A is best
represented by which font on plattform B.
regards,
the oracle reports team --pw

Similar Messages

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

Caution: Info structures S026 and S226 are active for repetitive mfg

Hi,
When I run the standard report MCRO - Material Usage Analysis: Repetetive Manufacturing, I am getting the message
Caution: Info structures S026 and S226 are active for repetitive mfg
How to overcome this.
thanks and regards
muru

Hi,
Try Thi - might work.:
1) Before running the tcode MCRO - (i.e type MCRO in the commond prompt and then do the next steps)
2) Menu- Got to- User settings
3) Default your user name will be there.
4) Now start selecting key figures and charecteristics.
Save and try to execute.

BEx:Hierarchies in DIM and FAC are different for Cost Element

Hi Experts,
Whenever we execute a report we are getting a warning message as "Hierarchies in DIM and FAC are different for Cost Element", but in report level we are not maintaining hierarchy properties for Cost Element.
We have executed Master Data tests in RSRV also and still the problem.
Is any other to do to get rid of this warning message?
Thanks in Advance.
Regards,
RAO.

Hi all,
I face the issue like this but with transaction KOAP - Plan settlement
But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement" without error
So, How this error come to me?
And how I can fix it?
Thanks all!

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

What ideal Win Server and Hardware are recommended for 11g DBs

What best Win Server and Hardware are recommended for 11g DBs?
- Processor
- Memory
- Storage
- Network
- Etc...
Following is the scenario:
- The server will be for development and test DBs
- More than one databases will be installed each for each project
- Maximum 4 databases will be accessed each time
- Maximum DB size for each DB will be in couple of GBs.

Which version of 11g ? For 11gR2, see the requirements here - http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#i1011417
Any server that exceeds these requirement will suffice. Obviously the more the number of processors, the faster the processors, the more the RAM, the more the disk etc etc, the better.
HTH
Srini

UKMCRED_SGM0C: Only tables and views are permitted for extraction???

All,
My BI transport got failed (from Dev to QA) with the reason
" UKMCRED_SGM0C: Only tables and views are permitted for extraction" . Can you please help me in this.
Thanks,
Andy

hi Roger,
Could you please provide more details of the transport ... like what was being transported ... from what I see I feel you attempted to transport a generic datasource.. not sure.
Best regards,
Kazmi

Which JVM and APIs are better for Palm application development

Hi All,
Any body tell me which JVM and APIs are better for palm device application development. A want to create a good GUI based application on Palm.
Please suggest me.
Thanks
Jack

hi jack...
You can use ibm's wsdd(websphere device developer) as plugin to wsad(websphere application developer) for developing web applications which can be run on palm devices. It uses j9(ibm's implemention of jvm).
thanks...

[svn:fx-trunk] 14462: Quick fix to ensure total byte counts are accurate for -size-report.

Revision: 14462
Revision: 14462
Author:   [email protected]
Date:     2010-02-26 14:11:20 -0800 (Fri, 26 Feb 2010)
Log Message:
Quick fix to ensure total byte counts are accurate for -size-report.
QE notes: None
Doc notes: None
Bugs: SDK-25600
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25600
Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SizeReport.java

If this is textual input (as in a CSV file), you wouldn't use a DataInputStream or DataOutputStream. Use FileReader and FileWriter objects instead.
Actually, unless this is a homework assignment that tells you to write it yourself, you should just use a library that can parse and format CSV files and just use that.
My battle plan is to count the number of rows and commas. I would then use these counts in my subsequent loops. Why? What is the purpose of those counts?
Personally, I'd suggest that you start by writing a method that does the changes you need on a single line of input. (The changes you describe sound like they can all happen on a per-line basis.) Write lots of unit tests to try out various inputs and that you get the correct outputs, given the changes you say you need on a given line.
When you're done with that and have it working perfectly, then you can write the code to read a file, loop through it, call the method that fixes a single line, and then output that line.

Understanding what HD i/o cards and converters are really for

Hi,
Just getting into the HD realm, I need some type of basic understanding of what 3rd party HD i/o and HD converters are use for. Sorry for the ignorance, but after viewing discussions and going to vendor websites such as Kona, BlackMagic, I am still a bit confused.
I have begun capturing DVCPRO HD from the HVX200 into my G% and external G-Tech Raid Hard Drive. I've been able to edit. I want to view my work on an a 3rd monitor, a 42" Panasonic 1080p HDTV.
Do I need an i/o card in order to just view on an external monitor or do I need a converter? I am not caputing HD since FCP can capture DVCPro HD natively. (I hope I am saying that correctly), so, with that being said, I am guessing that I just need a converter. Is that correct?
Again, sorry for being so ignorant about this, but all the discussions that I've seen are a bit over my head and I am trying to catch up.
Thanks,
G

HD cards are for capturing HD video, viewing HD video on HD monitors or downconverted to NTSC monitors, and for outputting to non-firewire HD formats, or to downconvert to SD upon output, or cross convert to another HD format (720p to 1080i) or upconvert SD to HD (depending on the card you have).
So yes, if you want to monitor your HD footage on an HD monitor, you'll need an HD card. With DVCPRO HD, you have the option of routing thru a DVCPRO HD deck, but those run $25,000...so a $995 card is the cheaper option.
Since you capture HD via firewire or direct import and have no need to capture HD, then you can look at the Matrox MXO as an option. It is output only, and the great thing is that it turns your Apple 23" cinema display into a color accurate HD monitor. Or...as I see you want to connect it to your panasonic monitor, you can go HD Component out to that monitor as well. Won't be color accurate, but it will be DARN close. The MXO is the perfect solution for laptops...as it connects via DVI. And it outputs HD to decks, downconverts to SD...all sorts fo good stuff.
For the same price you can get a Decklink Extreme and have the POSSIBILITY to capture other formats if that need ever arose. And it too has component out that you can connect to your HD monitor.
Shane

Edge and Next are good for the corporations but are they good for the consumer?

Ok so I have never paid full price upfront for a phone! Ever since my first phone from VoiceStream I have opted for what ever phone was "free" because way back then (I blush as I type) I actually thought the phone was "free!!!" Ah, to be naive again!! But as we all know the phones never were nor will they ever be free.
However I say programs like Verizon's Edge and AT&T's Next are good for the corporation if they weren't they would not exist. The first reason I say this is because Edge and Next allow the cellular service provider to easily recoup the entire cost of the phone in a clear way unlike with subsidized phones that muddy the profit water. For example, the Verizon 64GB iPhone 5s retails for $849.99, currently with a two year contract you pay $399.99 for that 64GB iPhone 5s. The EFT for that phone is $350 (minus $10 per month of post paid service). If you on the 15th the day after you got your phone you paid the EFT but kept service you only paid $749.99 for that $849.99. Sure you still pay for service but you can leave when ever and Verizon cannot say hey you owe us $100 more for you phone. Its yours and they can't take it back and the only way Verizon will get that $100 back is though another customer that subsidized a much lower cost phone that at the completion of that contract Verizon will more than recoup the cost of that lower priced unit. To top that off you could turn around and sell the phone for $800 go back to Verizon or another provider buy a $450 phone and break even. I'm not suggesting that people do that or that it may prove to be a big hassle for some that went through all the trouble. Its just a point to show that subsidized phones make the profits less clear for the service provider to see at first glance.
Second reason these programs are good for the corporation is they allow the service providers to get a better grasp on the true cost of maintaining their networks and providing us the consumer access to their networks. Third reason it good for the corporation is the people that feel the need to upgrade every six months to a year are required to pay at least 50% of the retail cost of the phone at the same time they must surrender that device in exchange for the new device. So the service provider then has the phone refurbished certified to be in "like new condition" and sell it again potentially making more than retail cost when the profits of both sales of the same handset are factored together.
That being said what will the impact of programs like Edge and Next have on cost of future cellular service plans and smartphones? Over time will the service provider give us the best per line access fee (not likely but maybe)? Or will people upgrading their smartphones at faster intervals cause the cost of the smartphones to drop over time? What are your thoughts?

Go to the link I provided and click on "Check upgrade eligibility"

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

Automatic creation of Company Code and Sales Area Data for Customer Master

Hi,
We have a organisation structure setup with multiple company codes and sales areas.
A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
I'm reluctant to use BDC's because of performance. We are in a Retail environment.
Thanks in advance
Craig

The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

Problem in Customer and sales Area assingment for STO

Hi Gurus,
I am working on STO cycle , while config. of STO in first step when i assinged customer and sales area to plant in NODE
"Define Shipping Data for Plants" ,here i can assinged only one customer belongs to only one Sales Area.
For Eg :- 1000/10/00 is my sales area and customer is 01
I assinged this to plant SID.
Now if i want to assinge different sales area for the same customer , Because STO will not ne happened only for one Division , it will transfer goods from many division from a single plant ,So how can assinge more division or more than one sales area to a single plant.
If through COMMON DIVISION , this problem is resolved please explain ,How means step. Because i want to assinge min 10 sales area to asingle plant means may be have to create common division funada, But how I m not getting.
Please Reply ASAP.
Devdatta Joshi

Dear Joshi,
1.First you do the common divisions and distribution channels through the t.codes VOR1 and VOR2.
2. You assign common sales area to the suppliying plant which you have difined in the common divisions and distribution channels.
i.e you maintain one division and one distribution channel as reference to all other divisions and distribution channels.
3.The purpose of the assigning sales area data to suppliying plant is, we are allowing the system to sale or transferinmg the goods from that suppliying palnt.
I hope it will help you
Thanks,
Murali.

Help and suggestion are needed for objects recognization

hi,
My problem here in another word is how to recognize and trace the object interested. The objects needed to be recognized are fibers but only single straight-like fiber is interested and multiple, culing, twisting fibers are not interested. Present I can effectively move the fibers to a position desired but I need to implement an algorithm to feedback the position of the fiber being traced. The system device I focus on is being contructed and I have collected some images shown as attachments. Images from 1 to 9 show fibers in first position zone and its imaging background should be the same each other after finalizing(now they are tiny different because I have to tune the positions of the camera and l
ighting sources case by case). Image 10.jpg shows the second position to be observed and there are some constant movable objects, and also some zones in second position are not good for imaging. The best lighting may be as the case of image 10. Tracing zones are first and second positions with the same movable CCD camera.
I have successfully made a VI to filter out a single fiber shown as 1.jpg and known the positions of its both ending, it's no problem for me to solve in this similar cases. But with this same VI, I also filtered out multiple, curling and blocking fibers shown as 2 to 8.jpg and I don't know how to clarify them to be not interested. Key idea in my vi is to compare new image with an image which has been defined as background(subtraction each other). I can filter out the longest one among multiple fibers in which fibers are not toucned each other.
Any suggestions are highly apprecitated because it's quite urgent for me to finalizing the device. I am using Labview 6,
IMAQ vision and IMAQ Vision Builder 6.0.
Best wishes to you for newly 2003!
Swedlin
Attachments:
images1_to_10.zip ‏361 KB
result_1_of_background_sutraction.tif ‏433 KB

For reference, he gave me the following list of downloads. This may or may not be complete.
SBOP ADDR DIR US
SBOP ADDR DIR US u2013 DIVERSIFIED
SBOP ADDR DIR US u2013 DPV
SBOP ADDR DIR US u2013 LACSLINK
SBOP ADDR DIR US u2013 SUITELINK
SBOP ADDR DIR US u2013 Z4CHANGE
SBOP ADDR GEO US u2013 TELEATLAS
SBOP CENT GEO US u2013 TELEATLAS
SBOP GEO DIR CANADA u2013 NAVTEQ
SBOP GEO DIR US u2013 NAVTEQ
SBOP GEO PARCEL US u2013 NAVTEQ
SBOP TIGER GEO US

HTML output on NT and solaris are diffierent for a report

Similar Messages

Maybe you are looking for