HTML Page has no scroll bar

I made my template size of 1024 x 768, when I open this page
in my browser, and shrink the browser window so its not full size
there are no scroll bars on the page to allow scrolling to see the
all the info on the page.
what am I not doing correctly ?

Dominic,
No, you don't have to open them in any application to be able to scroll. Better yet, the ability to preview them at their native size (instead of the tiny one-size-for-all) is now at your finger-tips.
It's called Quicklook, and no, you don't need to be in Coverflow view. Simply select the movie, then press your spacebar
Scott

Similar Messages

  • How do I add a form which has a scroll bar in PDF?

    Hi
    I would like a form to be added into PDF, however, the form is too long to be put in one page. There are also other stuff in the right hand side, so I wish the form has a scroll bar for the user to drag and browse, just like a web page scroll bar. Is it possible that Acrobat 3D8 support such function?
    Thanks!!!!

    Hi Kentyang,
    This is a 3D specific forum - maybe place this request in the Acro Script forum at http://www.adobeforums.com/cgi-bin/webx?14@@.3bb55d70
    Cheers
    Gazzz

  • Mac MIni has no scroll bar in Mail function with Maverick

    Out of the box mac mini has no scroll bar in Mail funtion

    have you looked:
    Re: Can't Scroll In Mail after Mavericks update

  • Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars

    I have two (2) HP S2031 LCD flat screen monitors.  They functioned perfectly with my old 32-bit machine (now gone).  I have just purchased a new 64-bit Windows 7 machine.  There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly.  It's as if it is a little too large.  I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement.  It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves.  I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).  
    Is it a 64-bit driver issue?   I think not, because display #1 looks fine.  Could it be an iogear KVM firmware issue?
    I dug out the HP driver disks that came with my monitors and installed them.  After I did that, I realized these were a 32-bit installation.  Now the monitor resolution won't go back to the higher, recommended level.  I don't see the software installation on the "add/remove programs" listing.  I'd like to change that.
    BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently.  Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
    Please help if you can.  This is for my trading business and I need it desperately.

    When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
    Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
    Please post back with your troubleshooting results.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How can I browse my page without a scroll bar?

    Hi, I 'd like to have  my site in specific size(1360x768pix) without a scroll bar,  since I 'm making it for a wide screen PC for a special occasion.
    I unchecked "sticky footer" , set 0 for both "Mergin" and "padding" of the "Page property".
    Although I set page size and property to make it fit on the screen, It shows scroll bars on the right and bottm of the browser.
    Is there any way to get rid of a scroll bar??
    It would be great if you could give me some ideas.
    Thanx!

    Thanks for the tip, guys!!
    I insert the
    <style type="text/css">
    overflow:hidden;
    </style>
    code in the<head>Sec. in the Matadata panel of the PageProperties. But I can't get rid of the scroll bar yet.
    Do I do that procedure for the every pages?? There's no Metadata panel in the Master page's Page property but other's. Thanx!

  • CS2 pages flyout-missing scroll bar and other icons

    I'm missing the scroll bars, trash, and other icons on the pages flyout window. I have reset to default workspace, restarted the program, and the computer and "saved as" and I can't seem to get them back. I'm guessing I hit a key and messed it up. Help!
    Thanks!
    iMac, OSX 10.5.8
    Adobe CS2, Indesign 4.0.5

    Replacing InDesign Preferences

  • How do I add a form which has a scroll bar?

    Hi there:
    I got trouble when I try to insert an Excel form into PDF. The excel form is quite long,I would like to make a scroll bar for it so that I don't have to roll all way down to the bottom of the page. How can I achieve this function in LiveCycle Designer or Acrobat?
    Thanks a lot!!

    From Tools>Advanced edit, select either the Combo box or the List box. One provides a drop down list that can be scanned and the other provides a scroll list. I suspect that Designer is similar, but I use Acroforms. For Designer, you would need to check that forum unless you have folks here that use it.

  • Web page has two scroll section but only one visible. Do not want to clear saved passwords.

    I am unable to browse the top section of my stock market webpage as the scroll bar has vanished after updating Firefox. It works in OK in Explorer. The techs suggested clearing my temporary internet files but I don't want to lose stored passwords.

    After Forms 6i it is only possible to run the Forms web based. Inside the the Developer Suite you can find an OC4J which allows you to run the Forms locally on the Development PC.
    There are setting in the formsweb.cfg which allows you to do some configuration. For instance the look and feel which is by default the green color. The size of your window which makes your current window smaller than your Form.
    At your last question. Do you want the other user to make use of your Forms or make use of your database. If you want him to make use of your Forms, the other user could call the locally installed OC4J with the http-address. If you want the user to make use of the database, the other pc should have a installed client software or make use a tool like SQL Developer to connect over JDBC.

  • Suddenly my project window has no scroll bars, and if I return to the project library, select my project and click edit, another project LIBRARY appears partially covering the project window.  Help.

    In the middle of making a movie, the scroll bars vanished in the project window and I could no longer navigate at all.  If I went to the project library and selected the project, another image of the project library slid in and entered onto my screen.  after repeated attempts to open the project in various ways, I have it now, but there are holes in the project window (blank background) and no scroll bars.  It does not respond to anything.
    can someone help?

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • My Firefox Start Page has no Location Bar

    When I open my Firefox Starter Page (after I installed the update) all it has on it, at the very top, are 4 tabs:"Latest Headlines;Most Visited;Getting Started;Google Search". The whole rest of the Starter Page is blank. The "Getting Started" tab is useless because it shows a "Starter Page" that looked like the one I used to have. I repeat I have no location bar or anything at all to use to try and get the starter page looking like the one I had.

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
    *https://support.mozilla.org/kb/how-to-use-full-screen
    If you are in full screen mode then hover the mouse to the top of the screen to make the Navigation Toolbar and Tab bar appear.
    Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.
    Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area

  • Suddenly I can not select anything within the top inch or so of any web page. The scroll bar arrow doesn't work at the top. I don't know what to do. I tried updating my browser but the problem still exists.

    Everything worked fine on Tues. I shut down my system and then on Wed. morning, the problem appeared. Anything within the top inch or so of a webpage is unavailable to select. It is like there is an inch of the page that is dead. It is that way on every website that I visit with Firefox. It does not happen if I use internet explorer, which I do not like and do not want to have to go back to using. Please help!!! My sister in law has the same problem with firefox.

    Hi,
    Please [https://support.mozilla.org/en-US/questions/911441 see this.] You may also want to check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]

  • Pages has no formula bar

    I imported a spreadsheet book from excel to Pages on my imac and it works fine except that there is no formula bar.   If I open a new sheet the formula bar appears, but the imported one is not present and I see no place to hide or reveal it.
    Thanks

    Sorry that was dumb.   Thanks for replying so quickly.    I meant to say "Numbers" instead of "Pages."   I opened the excel file in Numbers and there is no formula bar on any of the multiple spreadsheets.
    I can edit the formula in the cell, but I would prefer to be able to see the formula whenever a cell is highlighted.   I know this is how Numbers works but it just isn't showing up in this imported file.   Everything else works as expected.   I thought there might be a "Hide formula bar" and "Show Formula Bar" there someplace, but I can't locate it.

  • I loose focus on tab pages with horizontal scroll bar

    Hello
    I am using a form with two tab pages. On the second tab page there is a multirecord block from which the first 5 columns are context (always visible)), the other columns are working with a horizontal scrollbar. When I navigate to another window and come back to the first one, then the context columns are still there, but all the other columns are gone, there is only a big grey space. Any suggestions ? Webforms 10gR1.

    Not sure why that is happening. Are you running the newest JInitiator? What browser are you using?
    Maybe as a workaround, you may have to save the current record before leaving the first form, then when you return to the first form, requery the block and go to the current record. That's assuming, that a requery fixes the problem...

  • html:select with horizontal scroll bar

    I created list with fixed width, some records are long, I need a horizontal scrollbar to to view whole records. I use IE. How can I do this?
    Please help.
    piece of code..
                                                      <html:select property="pickedColSelect" style="width: 100%;"
                                                           multiple="true" size="10" ondblclick="examineColumnsPreRemove(myActionForm.pickedColSelect,false);
                                                                copyTextAndValueToSelectMenu(pickedColSelect, availColSelect, true, false,0, allowEdits);
                                                                     putFieldsInHidden(pickedColSelect, adHocReportForm.selectedColumnsString);
                                                                          return true;">
                                                           <html:optionsCollection name="adHocReportForm"
    Thanks in advance..

    See custom select tags in Coldtags suite:
    http://www.servletsuite.com/jsp.htm

  • A centred page moves about when scroll bar appears DW Cs5?

    Hi everybody, I have noticed that when you have web pages centred, that the pages annoyingly move about when a scroll bar appears. Some times a page is longer than the browser window and so a scroll bar appears on the right which allows the viewer to scroll down.
    But what happens is, it then centres the page in the centre of the space that is left after the scroll bar appears so the page jilts from to side to side according to whether the page has a scroll bar, obviously this looks rubbish.
    Is there any code that can make the browser centre the page in the same place, so that the scroll bar eats into the space on the right side rather than pushes the whole page over to the left. ?
    many thanks for any help
    Gareth

    Ideally, CSS code belongs in your external stylesheet file.
    While you're testing site ideas, you could temporarilly add styles to your HTML pages like so:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
    <LINK REL="SHORTCUT ICON" HREF=".\favicon.ico">
    <title>Template</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <style type="text/css">
    PAGE SPECIFIC
    CSS RULES GO HERE
    </style>
    </head>
    HTML & CSS Tutorials - http://w3schools.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for

  • A very strange thing happening with Nokia Map Load...

    I am trying to load new maps onto my x6. When I click on Nokia Map Loader it tells me that another instance of the programme is running and that I need to close that one down first. But this is not the case. I have no other programmes running. It men

  • How to run a script after resume from disk in pm-utils

    When I use pm-hibernate, I have a few scripts that I would like to run upon de-thawing. At the moment, all I want to do is module-related: I want to remove the pcskpr mod (which I have blacklisted in my rc.conf MODULES array, but HAL loads it upon th

  • No MP4 is file created using recording program IPV 5.2

    I've got a stream playing from a DVD player and everything is working great. I've been trying to record the stream to an archive server so I can play it back later but it doesn't seem to be working. I define a recording for the program, give it a sta

  • Night-service date including year

    Apologies if this has been already discussed but my quick search was unable to find a solution. We use the night-service feature for incoming calls to the office main number which works well. We also program the 'night-service date' option for all pu

  • Use of an abstract keyword

    Hi all , I want to know about 1.the usage of an abstract keyword. 2.Difference between abstract and interface 3.When to use abstract keyword.