HTML Preview for Financial Reportings Books

Hi all, im creating a book in financial reporting. The problem i have found is that when i open the book in html preview i can't expand members. It seems that financial reporting doesn't let you to expand members of its reports when you are in html preview, so reports in a book are static (well you can change Page member).
So does anybody know if it is a restriction of Financial Reporting Books (9.3.1) or is there any way of doing it.
Thanks in advance

If you are talking about "drilling", like clicking on Assets as a line item and having the report show additional lines, I have not seen that. The only expansion that I have found is when you build it into the report design. This expansion is only displayed one way on the report and is not interactive.

Similar Messages

Need help on running a book in HTML preview fetching entity from member lst

Hi Everyone,
I need a help on this quickly.
I am trying to run a book in which I include 1 report and this report has 3 POVs:
1) Year--> depends on book point of view
2) Period --> depends on book point of view
3) Entity--> This I am trying to pull from the dynamic member list or static member list.
Now when I am running a book in HTML Preview, I am getting the error "5104: Error executing Book member selection Catastrophic failure".
When I try to run the static member list for Entity (I include random 5 entities), the book run but gives me 5 different reports with fix POV for year and period but the 5 reports belongs to each of the 5 entities that I include in a member list.
My concern is how can I see the merger of all these 5 entities in 1 report on running a book in HTML preview? I know I can see the merger in PDF but how can I see that in HTML?
Also the error which I mentioned above for dynamic POV, how can I fix that and run the entity POV using dynamic member list.
The data is coming in this report through HFM (Hyperion Financial Management )source.
Please suggest on this issue as it is very critical and the production is getting affected.
Thanks,
Sumit

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Arvind Balaraman():
Hi
open your form in the form builder. select file compile all and run yor form. see if it works.
HTH
Arvind Balaraman<HR></BLOCKQUOTE>
Thank You.
I allready did that and it doesn't work!!!
null

HT3412 The preview of my hardcover book as iPhoto laid it out is 62 pgs. even though there are only 82 photos in my album. That seems like a lot of pgs. for so few photos. Is this a full 62 pgs or 31? How much is 62pgs?

The preview of my hardcover book as iPhoto laid it out is 62 pgs. even though there are only 82 photos in my album.
The auto layout used mostly 1 photo, full pages. Obviosuly I can manually re-layout the pages as multi-photo pages and reduce the number of pages.
However, that seems like a lot of pgs. for so few photos since a blank Photo Essay book layout appears to use 73 photos?
I'm not sure I know why iPhoto did not the default layout to fill those photo frames. I expected the 82 photos to use approximately 23-24 pages max.
Is this a full 62 full pgs or 31sheets?
If it is a true 62 pages, what is the cost?
Thanks for the help.

What does the book look like in iPhoto in the All Pages window? Are there photos on all pages? Books are printed on both sides of the page so that would be 31 pages.
This book has 48 pages or 24 sheets.
To find the cost click on the Buy Book button and check the price that is presented to you. You can always cancel out of the purchase process.
Happy Holidays

Defining default value for financial reports display in the workspace (9.3)

Hi
I need to change the default value for financial reports workspace preview mode, for every workspace user. It is actually set on html, and I would like to have pdf instead.
This option can be changed when logged on the workspace, in file->preferences->financial reporting->default preview mode. However I want every user to start with the right settings, so they dont have to change anything manually.
I have tried to do it with Shared Services : under projects, BI+, assign preferences. From there I can change the default folder and the start page (the general preferences), however I cannot find the options for financial reporting.
Is there a way to change these values with hyperion tools ?
If not, is it possible to change it directly in the repository DB ?Thanks and best regards

We looked at this about 2 years ago - from memory, you can only set preferences when the users are first setup in Shared Services, under the manage preferences section of the wizard.
I can't remember if there is a settings file you can edit for the default users - i think there is, but again this must be set before users are set up.
We looked at changing users preferences, but gave up on the idea as all users had been provisioned already :-(
Cheers, Iain

Proto html preview error in creative cloud

The HTML preview in Creative Cloud doesn't work properly. :-(
I can only see my prototypes in the proto app. When I'd like to see them in Creative Cloud in a browser, clicking the magnifier icon below the preview image, I can see only plain text without any CSS format.
In that case proto app is completely useless. :-( I can't show the wireframes to the customers, and co-workers.
Other question: I can only download .pro files. What can I do with them? I tried to open them in Dreamweaver, but it didn't worked.

Would you share an example of what you are seeing with me by making the file Public and emailing me at [email protected]
There is a beta extension for opening Proto files in Dreamweaver now available from here http://labs.adobe.com/technologies/protoextension/. Alternatively you can unzip the .pro file and bring it into Dreamweaver as explained by David in this forum post http://forums.adobe.com/message/4459278#4459278.

Imbedded graphics taking too much vertical space in HTML preview

Does anyone know why imbedded pictures should require more vertical space than expected on the HTML preview?
I imported a .jpg into my report layout, and immediately below it I added a line of text. The HTML preview shows me a LOT of unexpected blank space between the picture and the text.
I then inserted the .jpg into a table in which the "Fit to Content" option is checked. On the RTF layout, it looks great - the margins of the cell snuggle up pretty close to the picture. But when previewed, that extra blank space comes back and appears below the picture - the table row is a lot taller than it needs to be.
I've experimented with different image heights, and the amount of extra vertical space seems to always be about 40% of the height of the picture. So if the picture is 100 pixels tall, the table row is about 140 pixels, with 40 pixels of height in unwanted blank space. I can even set the row height to a value less than the height of the image. On the RTF, it looks right (chops a portion of the image). On the Preview... there's the blank space again.
Not only that, I can't get the picture to locate anywhere other than at the top of the table cell. No matter how I format the cell, the graphic insists on staying at the top.
BTW, the PDF preview behaves correctly. No extra blank space.

What's the 'tiny_spacer_rule' for which is applied to the paragraph tag between the end of your
'header' section and the start of the table?
<li><a href="testimonials/2010/june/2010june_testimonials.html">TESTIMONIALS</a></li>
</ul>

</div>
<p class="tiny_spacer_rule"> </p>

<table width="998" border="0" align="center">
    <tr>
      <td><img src="graphics/page_titles/antiques.png" width="450" height="75" alt="antiques title graphic" /></td>
      <td><img src="graphics/page_titles/crate_examples.png" width="450" height="75" alt="Crate example title graphic" /></td>
    </tr>
</table>

In controlling secondary cost element cost is considerble for financial rep

in controlling secondary cost element cost is it considerble for financial reporting requirment. In controlling for pm orders based on planning in kp26 they are booking man hours activity price. when at time of confirm of the order planning converted to actual.
Client is giving activity price based on primary cost, when we plan the activity price It will double booking what we incured in primary cost. let me clarify for financial report requirment can we consider secondary cost or not

Hi,
Secondory cost is a re allocation of Primary cost. It should not be considered if you are considering primary cost. Secondary cost is used for analysis and should not be confused with Primary cost
Ex. Cost gets collected to cost centers, The activity is a carrier which carries cost to Process/ production order. So that doent mean that the cost is gernerated twice once you book the financial and second when you acutally allocate the cost.
In controlling we allocate the cost in a more meaningful way to get the required analysis which will support the decision.
So both the cost should not be considered
This may be useful
Regards
Shantanu

Best methods for creating e-books from FrameMaker 10 (TCS 3.5)

I would like to know your thoughts on which of the following methods is the best, and easiest, way to create e-books from FrameMaker. I will most likely be using Calibre to do the file conversion.
(1) Using File > Publish > ePub to create an ePub file, which can then be imported into Calibre.
(2) Using the File > Save Book As > HTM command (which creates a separate HTML file for each FM file), editing the HTML files in RoboHelp (or another HTML editing tool), then importing all of the HTML files into Calibre.
Note that when I published to HTML from FM, it appears that only an output file was created from RoboHelp, as I could not find any HTML files were actually created. Is that the case, or was I just not looking for the HTML files in the right place?
If anyone has any other recommendations, please let me know! Thanks!

I linked the FrameMaker book to RoboHelp, then generated an ePub file from RoboHelp, and have a couple of issues.
(1) When I open the ePub file in Calibre and Adobe Digital Editions, there is no contents section within the book. The only contents is the contents in the navigation bar. How do I generate a contents to appear in the front of the ebook, or do I have to create that manually in RH? I did specify the settings in RH to convert the FM contents.
(2) The ePub file looks much better in Calibre than Adobe Digital Editions. Should I be concerned about this? Which viewer should I rely on?

ES4 HTML Preview Issue

I need to know the Server Options and the HTMl preview context options to be given in order to preview the PDF form in ES4 HTML5 preview tab.
As I am already able to view a form as a PDF in ES4 but the same has to be previewed in HTML5 preview tab available in ES4 designer 11.0 version, Kindly guide me on how to get the PDF form to be viewed as HTML page in ES4 designer HTML5 preview tab.
what are the options need to be provided to achieve this work.
It will be very heplful for me to proceed with my work has these being a show stopper to my current work flow.kindly convey your inputs for the same as early as possible.

Take a look at following documentaion for configurigring LC Designer for HTML Preview:
http://helpx.adobe.com/livecycle/help/mobile-forms/preview-xdp-forms-html.html
Alternatively, you can use Mobile Forms IVS for html5 preview of xdp form as mentioned at http://helpx.adobe.com/livecycle/help/mobile-forms/using-ivs.html
[Make sure you are using .xdp file for preview and not .pdf]

Web elemnt act different in crystal html preview vs infoview

We have a reports tested both in Crystal HTML preview(works) and in Infoview(does not work).
Any info on this?

can you please describe exactly what does not work in infoview.
also note that html preview in crystal reports is not really fully functional for webelements so you should always design for the infoview viewer.

Simple HTML Preview

I am moving to ColdFusion Builder from Dreamweaver and I am having issues with my html preview. I am trying to set up a project and give it the host header/url to use for html preview, but it keeps telling me that I don't have the ColdFusion server defined for my project. I don't really want to go through all that. I just want to tell it what host header to use. Any thoughts? Am I thinking about this wrong?
I have a project, without CFnature, whatever that is, and under properties->HTML Preview I am telling it to use an absolute URL and append the project relative path. When I try to use the browser preview, I get 'No server is configured. . . Configure a server.'
Any insight would be helpful.
PS - I tried searching for an answer for this, but didn't have any luck. If anyone has any tips on that I am open.

Adam notes the ease of setting up the Server configuration for a project. I would like to share some thoughts on why people may not do it, or why they should be prepared for possible problems if they do. (And why the previous "set url prefix" may be the preferred option for someone like robliesland who wanted that alone.)
It's true that adding a server connection is relatively simple to do (though not always), and it does to make CFB sing and dance, like showing datasources when you do CFQUERY NAME=", or when invoking methods of a CFC, and all the other cool things, but to get that you must configure the server connection which does change CFB to do potentially a LOT more work in the background (and at startup, and when opening projects, etc.) so that it gathers all the that cool info.
Some have complained of CFB being slow, and often it's because of this very connection to a server, at least in some situations (with a remote server, or one whose files are remote to you on your network, or where the CF server has a huge repository of CFCs pointed to by all its mappings, custom tag paths, a large webroot, etc.)
When you connect it to a server, you're asking it to provide all the powerful features that make it more than "just an editor" (or "just a knock off of CFEclipse"). But those extra (and powerful and vital) features do come at a cost, which some pay more than others, and is why some have chosen not to create server connections from their projects.
Of course, others don't do it because they either just don't notice they can, or choose not to when crating a project because they don't understand what it would give them (then they complain that it's nothing more than a CFEclipse knock off, and round and round we go.) It can also be a challenge to setup the server connection in some instances, like if the CF server is remote to you, etc.
I will note that as far as understanding the performance impact I allude to above, it can be REALLY helpful to turn on the Progress View (View>Show Other>Progress). At least you can see what's happening, and you may be very surprised. (It also tracks other background operations, like FTP processing if you do that.)
And you can also configure CFB to NOT do a refresh of the info from the "server" in several situations, such as when CFB either starts, or when you open a project, etc. See Preferences>ColdFusion>Server Settings. Whether that makes sense to change is dependent of course on how often your server config changes (new DSNs, new CFCs, etc.) Since CFB can't know what's best, it defaults to checking quite often.
Hope all that's helpful.
I point out these things and more in a talk I've given a couple of times, "Hidden Gems in CF Builder", available in both PDF and recorded form at http://www.carehart.org/presentations/.
/charlie

Scaling HTML Preview

Hy,
For the programm I'm building right now I need a scaleable preview for simple HTML (mostly Text). I got this to work with a HTMLEditorKit & some hacks (such as creating a View that works without a parent view). It scaled just fine using an AffineTransform applied to the Graphics object and had no problems (after some heavy debugging).
The real problems started when I needed to preview a <form> in this preview. The HTMLEditorKit (or more precisely the Views) use Swing components to draw the form-elements (which is reasonable, of course). Sadly Swing Components seem to work really bad with scaling. As soon as I have a Checkbox in my Preview and do Scaling at the same time it just throws the following exception.
java.lang.IllegalStateException: constrain(xywh) is not supported for complex transform.
     at sun.java2d.SunGraphics2D.constrain(SunGraphics2D.java:287)
     at sun.awt.SunGraphicsCallback.constrainGraphics(SunGraphicsCallback.java:25)
     at sun.awt.SunGraphicsCallback.runOneComponent(SunGraphicsCallback.java:51)
     at sun.awt.SunGraphicsCallback.runComponents(SunGraphicsCallback.java:97)
     at java.awt.Container.paint(Container.java:1123)
The only instance of scaled Swing components I've found was Jazz (at http://www.cs.umd.edu/hcil/jazz/ ). It would be a solution, but it seems like overkill. I don't have to be able to actually use the components. They only have to display.
regards
Joachim Sauer

If you are talking about "drilling", like clicking on Assets as a line item and having the report show additional lines, I have not seen that. The only expansion that I have found is when you build it into the report design. This expansion is only displayed one way on the report and is not interactive.

IFS HTML Preview

hallo list,
i run Oracle 8.1.7.2, iFS 1.19 an solaris.
iFS fits our purpose quite good, but the customization is really a hard pain.
The only thing i wanna do is to make a HTML preview of the document, when it
is stored via smb or http and display it later via the container.jsp.
In the ifssys schema there is a table called ODM_DOCUMENTFILTER which sounds for
to fit with the ctx_doc.filter procedure.
So my idea was to create a trigger on the table ODMM_CONTENTSTORE (where are the
real documents stored) like
create or replace trigger TRG_ODMM_CONTENTSTORE
after insert on ODMM_CONTENTSTORE
for each row
begin
ctx_doc.filter('GLOBALINDEXEDBLOB_I', :new.ID, 'ODM_DOCUMENTFILTER', :new.ID, false);
end;
Unfortunatly this was not working.
But in the iFS API I found two methods under the Document Class
Document.filterContent() and Document.getFilteredContent().
So my Question is:
1. What can i do that above trigger is working?
2. If not, how can i implement the Document.filterConent() method in the existing parser
without writing a completly new one. The method only has to save the filtered data in the
table ODM_DOCUMENTFILTER.
3. Is there a workaround, which has solved already my tasks.
Thanx for your help.
oliver

You will get a quicker, better, more expert answer if you post you questions on Oracle text in the Oracle text forum. Intermedia text is now known as Oracle Text.

Html preview in evaluation copy

I'm evaluating flash cs3 and am having a problem when I view
preview the html generation for a simple button that opens a url
(using actionscript 2 mode). When I go preview flash, the button
works. When I preview html, the button doesn't work. Is this
happening because it's an evaluation copy? or something else. I
also tried to add the flash content with dreamweaver, with the same
result as the flash cs3 html preview.
Any thoughts?

Are you talking about incoming or outgoing Mail messages?

HTML Preview panel - How To

Hi,
Now i am trying to develop a HTML preview panel in my HTML editor.
for the simple html documents I am giving to the editorpane by using setText() function it's working properly.
but if copy some html source from a website and set the source using setText(), it's not working..not even single text or image is displaying.
DOnt know the problem.
What I want to do is. a browser component by which i can display some HTMl content.
Pls help me.

I've already tried that and it doesn't work. In fact clicking inside the document window will deselect any of the found (grey hi-lighted) text.
Now, if I click and drag any of the text in the document, then it will be hi-lighted yellow as specified in the Appearance settings. But it will not be yellow when it is found as part of a search and the thing that's most frustrating is that older versions of Preview (or OS X) had this feature. I can't understand why Apple would do away with it in favor of light grey!

HTML Preview for Financial Reportings Books

Similar Messages

Maybe you are looking for