HTML Programming Question

I'm working on creating a custom page template. I'm basing it on the template "One row of tabs with sidebar"
Now for the sidebar, I'm thinking I'm going to use a DHTML Tree. Now this is where I'm not sure how I should proceed based on the requirements which have been given to me.
The way they want this to work is:
1) User clicks on Root Node
Tabs that belong to Root Node should be displayed in the body.
Navigation goes to first tab available.
2) User clicks on child of node
Tabs that belong to Root Node should be displayed in the body.
Navigation goes to the tab that corresponds to the child that was clicked.
I was wondering if I can just use the same page and do all of this dynamically? For example, WAY back when I used to mess around with HTML, there was something called a frame. Would this be the best way to go?
I've also seen where people will write a "template page" and then pass in a PHP file to replace the body.
Just looking for ideas here...of course in terms of what is best and easiest (hehe is that an option) while using APEX.
Thanks,
Chad

Hi Chad,
The time to use frames is over ;)
If you want to do something dynamically it's the AJAX way... have a look at Carl Backstrom and Denes Kubicek examples.
In your case you'll probably need to adapt the css (you can make that dynamically) or by changing templates...
I'm not sure what you're trying to do, as a tree normally "stays" in the same tree. You want to have the navigation somewhere else? Maybe you can use a Tree and a List based on the tree? I'm just spitting some ideas here.
Hope that helps,
Dimitri

Similar Messages

I have a programming question

Hi
I have a programming question here. I spent a lot of time doing it, but I still can't get it. Here is the question :
Write a method called countTo that takes one integer as a parameter and prints a
comma-separated list of the numbers from 1 to the value of the parameter, or an
appropriate error message if the parameter is less than one. In either case (if a list
of numbers is printed, or an error message is printed), after printing, the cursor
should be advanced to the next line.
For example, if the parameter has a value of 1, the method should just print the
the value 1 to the screen followed by a new-line character. If parameter has a value
of 5, the method should print the following (exactly as shown, make sure there is
no comma after the last value, and that all values are on one line with no spaces
between them):
1,2,3,4,5
This method should only print to the screen, and should not return a value.

I have a programming question here. I spent a lot of
time doing it, but I still can't get it. Please post what you have done so far.

Problem in running a simple html program in netbeans 5.5.1

Dear all
when i am running a simple html program in netbeans 5.5.1, it is not showing the result. In url address is showing defferent. such as
http://localhost 8084/... while i need http://mydocument and setting/...
so i want to set the default address. from where shound i set it, so that in url address should come right.
thanks
From
Rajeev Sarawat

Hi cliff,
Worked as per ur Suggestion , the .tld file had
<!DOCTYPE taglib tag, I removed it, it is still not working , I m using tomcat 3.2
I tried to run the simpletag example given with Tomcat it runs, but when I copied that example to my webapps/TagViews direcotry and corrected the package and made necessary changes in web.xml kept in
WEB-INF direcotry , it gives the same error,
Is there any requirement to make a war file for taglib to run or some thing like that, or is there any other requirement after making
1) The .class file kept in install_dir/webapps/TagViews/WEB-INF/classes/Tagbeans
2) The .tld file kept in
install_dir/webapps/TagViews/WEB-INF/jsp/
3) Made cahnges in web.xml kept in
install_dir/webapps/TagViews/WEB-INF/
4) Made the jsp file kept in
install_dir/webapps/TagViews/jsp/
After doing this I restarted the tomcat server and then tried http://localhost:8080/TagViews/jsp/myTag.jsp

XML BURSTING PROGRAM QUESTION

Hello All,
I have customized an oracle application program with xml publisher.The program prints the report in PDF format.
My questions is where this output copied in the server .I am not able to find the pdf report in $APPLCSF/out/.
Do i need to use XML bursting program to achieve this?If yes i am new to xml coding can anyone help in creating busting control file.
My object is to print the pdf report to unix server directory
THanks

Pl post details of OS, database and EBS versions.
>
My questions is where this output copied in the server .I am not able to find the pdf report in $APPLCSF/out/.
>
The xml and PDF output of concurrent programs should be available in $APPLCSF/$APPLOUT directory.
>
Do i need to use XML bursting program to achieve this?If yes i am new to xml coding can anyone help in creating busting control file.
>
Pl see if these links can help
http://blogs.oracle.com/xmlpublisher/2007/04/bursting_with_bip.html
http://blogs.oracle.com/xmlpublisher/2007/04/e_business_suite_bursting.html
>
My object is to print the pdf report to unix server directory
>
Pl clarify what you mean by this.
HTH
Srini

Please answer a programming question for an admin

I'm not a programmer (although my interest is growing), so I can't answer this question in a discussion regarding how Win32API w/OLE and COM is SO much better than programming for Unix/OS X applications.
The original discussion was in regards to OS X's superior Unix based security, he devolved to this. Having only begun my venture into programming, his questions are a little above my head at this point. I'm also interested (as an amature programmer), how this would be accomplished in OS X/Unix.
Thanks in advance.
Here's his position:
*(1st entry)*
I have unsed Windows and many flavors of Unix and I have written programs in Assembler, Fortran, Pascal, Cobol, RPG, Smalltak, Basic, PowerBuilder, Delphi, C, C++, C#, Java, and Perl, and I have been programming for over 20 years, so I do have extensive knowledge about programming.
So I have one question for you:
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
I make my living building complex customized business software, and Windows allow me to build these applications by myself in weeks, when it would take me and a team of programmers months to do these same things in Unix because of the lack of an the Win32 API, COM, and OLE, or I would have to BUY third party libraries that did these things, and deal with the licensing, versioning, and vendor problems that go with them, and none of those third party librabries would be close to Word, Excel, and IE in CAPABILITY!
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
Anyone who thinks a Unix has more CAPABILITIES than Windows, has never used Win32API/COM/OLE/.Net, and does not build customized complex business software for a living, because we people that do are the reason that you find some much customized business desktop software for Windows, and so little for any Unix.
I have nothing against Unix, and it is great for simple business tasked server software, but for complex business tasked desktop software Windows with Win32API/COM/OLE/.Net wins hands down!
*(2nd Entry)*
A System administrators view of an operating system and an application developers view are entirely different, and the Win32API/COM/OLE/.NET simply make my job so much easier, and you simply don't understand because you do not have to deal with the "dirty' details of making what a user wants, which is why your definition of "integration" and mines are totally different!
With the spell check you talked about, how will you keep in in synch with the dictionary in Word where the user is constantly adding and removing words?
No, you would have the user to have to maintain two different spell check dictionaries, and you would totally ignore the grammer check requirement!
Cutting and pasting data between applications is simple integration, and not the complex type that I am talking about.
Can you make your application display and use the MacGourmet menus appear in its own window, and to access and use the MacGourmet functionality (ie. search for a recipe) in its own window?
Give me one example of a Unix application that can display the menus of another application, yet alone control its features!
Of course you can't, because you need COM and OLE!
I am quite familiar with different flavors of Unix, but those operating systems do not have the rich API and program integration features namely COM and OLE that Windows has, because it violates the Unix idea of security by process isolation!
Yes that idea of process isolation keeps the operating system safe from malicious code in applications and from one application taking the others down, but you lose the power of programs working together, and you simply cannot build the type of customized business applications that I build by myself, without reinventing the wheel over and over and without having a large team with lots of programmers.
For example, my customers and millions of others spend all day working in Word and Excel, and the Windows idea that I can transparently integrate my complex business applications right in Word and Excel menu, and into their templates and macros, is why third party developers like me prefer Windows over Unix, regardless of how much better security in Unix is.
Do not get me wrong, Java improves business application development on Unix, but unfortuantely it is not feasable to rewrite ever legacy application in Java, and Java does not integrate well with other programming languages.
I used to code business application for both IBM MVS and Sun Solaris, and I never want to go back to those "bad" old days again, once I took the time to learn how to PROPERLY code using Win32API/COM/OLE/.NET!

At risk of feeding the troll I'll wander in here:
NOTE: Since this is an Apple programming boards and I have limited experience programming on traditional Unix systems (and most of that in college) I will confine my answers to the area I know.
If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
Note that this scenario assumes the user has Microsoft office installed. The person argues that they don't have to purchase libraries to program but what they are effectively doing is simply transferring that cost to user. I don't have to purchase libraries but everyone of my users needs to. Good for you, very good for Microsoft but bad for your customer - IMHO. OK, I know "But all Windows business users have Office installed already." When it comes free with the system then I'll retract my objection.
Under OS X and Cocoa many of these functions are intrinsic to the system layer and do not require any applications to be installed. Using Cocoa you can write a simple Word processor that has rulers, full font manipulation (including kerning, spacing and leading), Document Save and Load, Printing, Export to PDF as well as spell-checking in under 10 lines of actual code. Adding a custom file type and icon for full system integration will add another 5 minutes to your programing.
In case you think I'm blowing smoke here is a tutorial from 2002 (yes, this has been possible for over 5 years) outlining the 8 line Word Processor build in Cocoa. http://www.stone.com/TheCocoa_Files/What_s_sofunny.html
And yes, Cocoa also includes Webkit so I can add full HTML rendering by dragging in a WebKit window to my user interface. For an experienced Cocoa programmer this certainly sounds like less than a day of programming - in fact it sounds like a good tutorial for a middle-experienced training day or 2 day class in Cocoa.
I won't include the link to the 1 line web browser you can build in Cocoa using Webkit because it's shorter than the description. Feel free to search for it if you want to.
HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
BUT this is all done from the stock system that is on every OS X computer not simply those with Office installed. Obviously you'd need to add some features that were more complicated than this - because any halfway decent programmer could turn this stuff out - and polish takes a while but to meet the requirements of the challenge it would take 2 days tops.
Is every *nix programming environment like this? I don't know I can only answer for the system that I have experience with and is the concern of this board. If you really have questions regarding *nix programming then I suggest you find an appropriate board and troll^H^H^H^H^H ask there.
If you're ever serious about programming on the Mac feel free to stop by and actually take a look at it. I think you'll be surprised.
=Tod

Audio Programming Questions...

Hi everyone,
I am very new with audio programming with Java and I have a couple of questions...
(1) How can I specify a Line from which I can capture audio signal. I want to capture signal from a MICROPHONE and then process the signal (with a FFT function). I tried to use Port (instead of DataLine) and I managed to get the specific port (Port.MICROPHONE) but it seems that port has no function to read from the line. Therefore I assumed that the only way to capture and process audio signal is through DataLine. However I cannot specify the line. How can I do that???
(2) Is it possible to capture and process audio signal through Port??? I mean can I read bytes from a audio stream and write it to a TargetDataLine???

Hello!
There is a Java Sound mailing list. You would get more response from those subscribers. You can join it from here: http://java.sun.com/products/java-media/sound/list.html
Hope that is helpful.
Regards,
Steev.

Misc Basic PL/SQL Application Design/Programming Questions 101 (101.1)

---****** background for all these questions is at bottom of this post:
Question 1:
I read a little on the in and out parameters and that IN is "by reference" and OUT and IN-OUT are by value. To me "by reference" means "pointer" as in C programming. So it seems to me that I could call a function with an IN parameter and NOT put it on the right side of an assignment statement. In other words, I'm calling my function
get_something(IN p_test1 varchar2) return varchar2;
from SP1 which has a variable named V_TEST1.
So.... can I do this? (method A):
get_something(V_TEST1);
or do I have to do this (method B):
V_TEST1 := get_something(V_TEST1);
Also, although this may muddy the thread (we'll see), it seems to me that IN, since its by reference, will always be more efficient. I will have many concurrent users using this program: should this affect my thinking on the above question?
-- ******* background *******
So Far:<< I've read and am reading all over the net, read and reading oracle books from oracle (have a full safari account), reading Feurstein's tome, have read the faq's here.
Situation Bottom Line:<< Have an enormous amount to do in a very little time. Lots riding on this. Any and all pointers will be appreciated. After we get to some undetermined point I can re-do this venture as a pl/sql faq and submit it for posting (y'alls call). Some questions may be hare brained just because I'm freaking out a little bit.
Situation (Long Version):<< Writing a pl/sql backend to MS Reporting Services front end. Just started doing pl/sql about 2 months ago. Took me forever to find out about ref-cursor as the pipe between oracle and all client applications. I have now created a package. I've been programming for 20 years in many languages, but brand new to pl/sql. However, pl/sql sql has freed me from myriad of limitations in MS RS's. My program is starting to get big (for me -- I do a lot in a little) pks is currently 900 lines with 15 functions so far. Currently SP (pls) is back up to 800 lines. I get stuff working in the sp then turn it into a function and move it to the package.
What does application do?:<<<< Back End for MS Reporting Services Web front end. It will be a very controlled "ad-hoc" (or the illusion of ad-hoc) web interface. All sql queries are built at run-time and executed via "open ref cusor for -- sql statement -- end;" data returned via OUT ref_cursor. Goal is to have almost 100% of functionality in a package. Calling SP will be minimalist. Reporting Services calls the SP, passes X number of parameters, and gets the ref_cursor back.
Oracle Version: 10.2 (moving to 11g in the next 3 months).Environment: Huge DW in a massively shared environment. Everything is locked down and requires a formal request. I had to have my authenticated for a couple dbms system packages just to starting simple pl/sql programs.

Brad Bueche wrote:
Question 1:
I read a little on the in and out parameters and that IN is "by reference" and OUT and IN-OUT are by value. To me "by reference" means "pointer" as in C programming. So it seems to me that I could call a function with an IN parameter and NOT put it on the right side of an assignment statement. The IN parameter is not passing by reference. It is passing by value. This means variable/value of the caller used as parameter, is copied to the (pushed) stack of code unit called.
An OUT parameter means that the value is copied from the called unit's stack to the caller (and the current value of the caller's variable is overwritten).
To pass by reference, the NOCOPY clause need to be used. Note that is not an explicit compile instruction. The PL/SQL engine could very well decide to pass by value and not reference instead (depending on the data type used).
Note that the ref cursor data type and the LOB data types are already pointers. In which case these are not passed reference as they are already references.
The NOCOPY clause only make sense for large varchar2 variables (these can be up to 32KB in PL/SQL) and for collection/array data type variables.
As for optimising PL/SQL code - there are a number of approaches (and not just passing by reference). Deterministic functions can be defined. PL/SQL code can be written (as pipelined tables) to run in parallel using the default Oracle Parallel Query feature. PL/SQL can be manually parallelised. Context switches to the SQL engine can be minimised using bulk processing. Etc.
Much of the performance will however come down to 2 basic issues. How well the data structures being processed are designed. How well the code itself is modularised and written.

Calendar Program Question

Hello! Among the lab assignments I have done for my class, I have this calendar project I've been working on for a good while now. My only question is how do I set the days of the month properly with the empty columns I have encoded in the program? This is a long program and I really haven't put any time into making it look neat, so bare with me!
What I get so far in the interaction pane is:
March 2008
              1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
and what I'm looking for, obviously, is:
March 2008
                    1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31> Sometimes I over look something minor, but I'm stumped and this is the ONLY thing I have to do to finish this project!
/* Calendar Program that displays the days of the
* month between January 1800 to December 2099
import javax.swing.JOptionPane;
public class CalendarProgram
public static void main(String[] args)
    String monthStr, yearStr, displayStr;
    int year, firstTwoYear, lastTwoYear;
    int daysinMonth = 0, dayofWeek = 0;
    int firstDayofMonth = 1;
    //asks user for input, and then checks if monthStr matches with the user, then displays it.
    monthStr = JOptionPane.showInputDialog(null, "Please enter the month (e.g. January):");
    if(monthStr.equals("January"))
        displayStr = monthStr;
    else
    if(monthStr.equals("February"))
        displayStr = monthStr;
    else
    if(monthStr.equals("March"))
        displayStr = monthStr;
    else
    if(monthStr.equals("April"))
        displayStr = monthStr;
    else
    if(monthStr.equals("May"))
        displayStr = monthStr;
    else
    if(monthStr.equals("June"))
        displayStr = monthStr;
    else
    if(monthStr.equals("July"))
        displayStr = monthStr;
    else
    if(monthStr.equals("August"))
        displayStr = monthStr;
    else
    if(monthStr.equals("September"))
        displayStr = monthStr;
    else
    if(monthStr.equals("October"))
        displayStr = monthStr;
    else
    if(monthStr.equals("November"))
        displayStr = monthStr;
    else
    if(monthStr.equals("December"))
        displayStr = monthStr;
    //asks for the year from user
    yearStr = JOptionPane.showInputDialog(null, "Please enter the year between 1800 and 2099:");
    year = Integer.parseInt(yearStr);
    //displayStr that displays the user's month and year.
    displayStr = monthStr + " " + yearStr + "\n";
    System.out.print(displayStr);
    //computation of the first two digits and last two digits of the year.
    firstTwoYear = year / 100;
    lastTwoYear = year % 100;
    //HUGE computation to check the dayofWeek variable. This should compute where the first day of the month will display on the calendar.
    if ((lastTwoYear >= 0) && (lastTwoYear <= 99))
     dayofWeek = lastTwoYear * (1/4);
    if (firstTwoYear == 18)
      dayofWeek = dayofWeek + 2;
    else if (firstTwoYear == 19)
      dayofWeek = dayofWeek;
    else if (firstTwoYear == 20)
      dayofWeek = dayofWeek + 6;
    //Checks to see if a given year has a leap year or not.
    boolean leapYear =
      (year % 4 == 0 && year % 100 != 0) || (year % 400 == 0);
    if(monthStr.equals("January"))
      daysinMonth = 31;
      if(leapYear)
         dayofWeek = dayofWeek + 6;
       else
         dayofWeek = dayofWeek + 1;
    else
    if(monthStr.equals("February"))
       if(leapYear)
         dayofWeek = dayofWeek + 3;
         daysinMonth = 29;
       else
         dayofWeek = dayofWeek + 4;
         daysinMonth = 28;
    else
    if(monthStr.equals("March"))
         dayofWeek = dayofWeek + 4;
         daysinMonth = 31;
    else
    if(monthStr.equals("April"))
         dayofWeek = dayofWeek;
         daysinMonth = 30;
    else
    if(monthStr.equals("May"))
         dayofWeek = dayofWeek + 2;
         daysinMonth = 31;
    else
    if(monthStr.equals("June"))
         dayofWeek = dayofWeek + 5;
         daysinMonth = 30;
    else
    if(monthStr.equals("July"))
          dayofWeek = dayofWeek;
          daysinMonth = 31;
    else
    if(monthStr.equals("August"))
          dayofWeek = dayofWeek + 3;
          daysinMonth = 31;
    else
    if(monthStr.equals("September"))
          dayofWeek = dayofWeek + 6;
          daysinMonth = 30;
    else
    if(monthStr.equals("October"))
          dayofWeek = dayofWeek + 1;
          daysinMonth = 31;
    else
    if(monthStr.equals("November"))
          dayofWeek = dayofWeek + 4;
          daysinMonth = 30;
    else
    if(monthStr.equals("December"))
          dayofWeek = dayofWeek + 6;
          daysinMonth = 31;
    dayofWeek = dayofWeek + firstDayofMonth;
    dayofWeek = dayofWeek % 7;
    //this checks if dayofWeek equals 0, it will be placed on the 7th column (Saturday)
    //else the dayofWeek will enter 1-6 like normally (Sunday-Friday)
    int colnum;
    if (dayofWeek == 0)
      colnum = 7;
    else
      colnum = dayofWeek;
    for(int i = 0; i < colnum; i++)
      System.out.print("   ");
    //Displays days of the month and inserts empty columns before 1st day
    for(int day = 1; day <= daysinMonth; day++)
   if (day < 10)
     System.out.print(" " + day);
   else
     System.out.print(" " + day);
   if ((colnum + day) % 7 == 0)
     System.out.println();

Well, I could move the displayStr = monthStr into the other section of the code where the months are at, but as far as using java.util.Calendar/GregorianCalendar classes the professor made no recommendation of it (though it would be easier no doubt.) That's what he told us to use to display the month properly. I did look in the web for other examples and they did use the java.util.Calendar/GregorianCalendar classes, but I have no idea how to properly implement it. Besides, I was not asking about redundancy.
After I made the thread, I did work on it a little bit more, and I changed:
   if ((lastTwoYear >= 0) && (lastTwoYear <= 99))
     dayofWeek = lastTwoYear * (1/4); into:
if ((lastTwoYear >= 00) && (lastTwoYear <= 99))
     dayofWeek = (int) (lastTwoYear * .25);The year 2008 was properly displaying everything on the correct dates, but the other years are off by a few days. So now its either the computation in the long sequence of dayofWeek variable, or (what the professor mentioned in the assignment) it could be:
     loop (for the number of days in the month)
       displayStr = displayStr + <digit in field width of 3>
       if last digit in row, then append �\n� to displayStr}The whole loop, including the "append "\n" to displayStr" doesn't make much sense. So that could be where I'm having problems.

Silly HTML wordwrapping question...

Sorry if the question seems dumb, but is there a way to
insert a space in a
block of text that won't break up a word during wordwrapping?
Example : « This is a test »
I like the spaces between the quotation marks and the quoted
text. But I
don't want either of them left stranded. I want this block of
text to behave
like those 2 spaces don't exist. Wrap BEFORE the 1st quote,
or after the 2nd
one (or at any point in between as long as it's between two
words).
How do I tell those two spaces to be ignored by wordwrapping
rules?
Thanks.

Or HTML -
" whatever "
But Cosmo's solution is a more efficient way for sure.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Cosmo Kramer" <[email protected]> wrote in message
news:gorfvm$2bi$[email protected]..
> In CSS:
> white-space: nowrap
> Should do the trick.
>
>
> "Mike" <[email protected]> wrote in message
> news:gorfpc$228$[email protected]..
>> Sorry if the question seems dumb, but is there a way
to insert a space in
>> a block of text that won't break up a word during
wordwrapping?
>>
>> Example : « This is a test »
>>
>> I like the spaces between the quotation marks and
the quoted text. But I
>> don't want either of them left stranded. I want this
block of text to
>> behave like those 2 spaces don't exist. Wrap BEFORE
the 1st quote, or
>> after the 2nd one (or at any point in between as
long as it's between two
>> words).
>>
>> How do I tell those two spaces to be ignored by
wordwrapping rules?
>>
>> Thanks.
>>
>
>

Apple iPod Nano replacement program - question

Hello, Apple community,
I have a question about the new replacement program of the iPod nano 1st gen.
The program doesn't state whether or not you get a refund or a new iPod nano (the small squared once with touch screen).
The program says that you'll get a replacement iPod Nano, but isn't very specific if it is the new generation.
I apologise for any spelling mistakes and such.
Thank you for any answer,
Pool313

Hi lindsayfromspencerport,
I can say it is not a scam - Apple is definitely replacing the iPods. Once I read the article and went to apple.com, that proved it. Apple.com would never risk another class action lawsuit over this iPod.
My First Generation iPod was given to me at work for being the winner of a give-away drawing and about a year or so ago it overheated and erased all the info on the iPod. Now it will only charge and drain the battery. It no longer allows me to store any thing on it.
I am glad that Apple is doing this exchange. I thought I was just out of luck and was glad I had not paid full price for it. I love my Nano and used it constantly!!!
Just send your's in using the box and label they send you and give them 6 weeks like the apple.com website says, Apple will make good on their product. Millions of people don't stand in line and wait weeks/months for their new products to arrive for no reason, trust me. Oh, by the way, I know this for sure.....I work for a wireless phone service that has been dealing with Apple for Yearsssssssssssss.....and every year the same thing. People will give anything to get a product with that apple on it.
Knightmanxx

Java Programming Questions

I have taken a couple class in Java programming in just regular programming with GUI/console. I am looking to further my programming skills and wonder what course I need to take to become a java programmer for companies. I am confused on all this language in Java and there does not seem to be any reference to explain exactly what these technologies are. Example is.....What is J2EE? What is .JSP? Are they the same things? What environment is most commonly used in jobs? What about Java certifications?

Here's the path tree to become a Java Programmer from Sun Microsystems:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getlppage?page_id=212&path=SJPF
There are other paths like Web Development and Databasing, so click around if you're interested in those. I think for a standard Java Programming job you will want the "Java Programming for Professionals - Sun Certified Java Programmer".
However, most Jobs are specialized and require skills like JSP Development or Java Enterprise. Look around at a job search site and see what types of skills Java jobs are asking for.
I've noticed, for example, that Java web jobs generally require: PHP, HTML, JSP, XML, SQL, etc.

Java Programming Question

Hi,Everybody:
I have a question about Java programming. If I want to write a java class code called if.java like below, how should I do to make it pass the java compiler and make it work. I know the words "if" and "for" are reserved words. I just try to figure it out that is it possible??? Do I need to create my own java compiler or recompiler?
public class if
public if() { }
public static for test()
return new for();
public class for
public for() { System.out.println("for class constructor"); }
}

I don't think you can bypass the compiler's rejection of this. There is little point to naming the classes after keywords. Not sure if it's case sensitive though, so maybe "If" or "For"? Otherwise, try "if_" or "for_"

HTML-ish question - Sorry

hi when i cast a string out of a vector and use that string as the VALUE parameter in a html textfield it only puts the first word of the string in the textfield:
String tempString = (String)vec.elementAt(1);
out.println("<input type=text name=Subject value="+tempString+">");
what i want coming out is the 'Re: Last Night' into the textfield but all i get is Re:. Has anyone had this problem ever?

they never even tried to teach us roman numerals in school, ooh i mean that /" stuff :) thanks, i love you all! as i have to contain all these shoddy errors in my program although i could have handed it up like i had it, it probably would have been marked down a whole grade so thanks again, but check out my other error/thread where i go to upload a file and want to keep the email rant in the textarea to come back to after i upload a file - i'm greedy i know that but it's the last problem for this term, i'll go back to pestering the chemist for free medical advice. thanks again

Html & flash question

It is possible to embed a flash .swf inside an html web page.
Is it possible to embed an html file, such as a long text file, into a flash .swf space, such as a blank movie clip box?
Is there an alternative way to stick giant text files into a flash style document?

I definitely discovered this yesterday. Bold and Italic work, but break, paragraph, A HREF, and Headers didn't. With so many restrictions it seems the htmltext option is worthless (kind of like a new Itouch on a camping trip).
Related question:
Is there a special protocol, in actionscript that allows Youtube videos to be embedded (rather than creating a hotlink to a new html page with the standard youtube embedding technique) ?
Almost related question:
I used this format:
clicke2.onRelease = function(){
    getURL("http://www.google.com", "_blank");
for a winamp/mp3 radio station button, with the goal of doing something vaguely similar to shoutcast for a more specific list of internet radio stations, as shown below:
clicke4.onRelease = function(){
    getURL("http://www.sky.fm/mp3/classical.pls", "_blank");
this opens a blank html document and plays in winamp. I tried this:
clicke4.onRelease = function(){
     getURL("http://www.sky.fm/mp3/classical.pls", "_self");
but it did the same thing - opening a blank page along with the winamp. Opening the winamp is the goal, opening a blank page is not. Is there a way to not open the blank page?

HTML random question score incorrect. SWF works fine

Version 8.0.1.242
Question pool 25 questions. Random Question slides inserted. All questions set to score 1. 24 are multichoice, all standard.
Published as HTML
Score reported is 1 out of x.
I have tested with 3, 5 and 25 random questions from the pool. But the score is always 1 out of x
Published as SWF
Works correctly
I really need the HTML version.
Closed, reloaded. Saved as - retested. Turned it off and turned it back on. Sacrificed a mouse...
Andy

Correct questions
....Should be same as total points scored anyway as there is 1 point for
each question.

HTML Programming Question

Similar Messages

Maybe you are looking for