HTML Quoting & Advanced Pricing Integration (Discount Modifiers not working

Hello Gurus,
Customer is using HTML Quoting, we have created Pricing Discount Modifiers in QP.
But these Modifier are not getting applied in HTML Quoting?
Customer is on R12
regards
girish
Edited by: 849679 on Oct 9, 2012 2:24 PM

Verify your setups by going thru' the following presentation.
http://www.ncoaug.org/NCOAUG%20Training%20Day%20Feb%202009/Sundeep%20Sharma%20-%20Integrating%20Advanced%20Pricing%20with%20Purchasing%20in%20Release12.pdf
It is for R12 but most of it is applicable to 11 too.
Hope this helps,
Sandeep Gandhi

Similar Messages

  • The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

    The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

    Hi Luis Fernando Garcia,
    Thanks for using Apple Support Communities.  This article has troubleshooting for keys not working on your keyboard:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Some keys don't work as expected
    From the Apple menu, choose System Preferences.
    From the View menu, choose Speech.
    Click the Text to Speech tab.
    If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
    Click the Universal Access pane in System Preferences, click the Keyboard tab.
    Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
    In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
    If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
    If the issue persists, use Keyboard Viewer to help isolate the issue:
    Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
    Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
    Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
    From the Input (flag) menu, choose Show Keyboard Viewer.
    If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
    Cheers,
    - Ari

  • In Oracle 11.5.10.2 Advance Pricing, quantity discount in ranges

    In Oracle 11.5.10.2 Advance Pricing, we have a requirement. free item promotion based on range of items ordered. Eg: If customer buy 10 qty then 2 free, else, if customer buy 20 qty. then 5 qty free, else, if if customer buy 30 then get 8 qty free. How to achieve in Advance Pricing. Is it possible to achieve a range of free quantities in Advance Pricing?

    In Oracle 11.5.10.2 Advance Pricing, we have a requirement. free item promotion based on range of items ordered. Eg: If customer buy 10 qty then 2 free, else, if customer buy 20 qty. then 5 qty free, else, if if customer buy 30 then get 8 qty free. How to achieve in Advance Pricing. Is it possible to achieve a range of free quantities in Advance Pricing?

  • IDM - GRC AC 5.3 integration - workflow detour not working as expected

    Hi IDM Experts!
    I would greatly appreciate your help with the problem we're currently facing; when integrating IDM with GRC, we have configured 2 CUP workflows; one for handling requests with SoD violations (Workflow B) and one to handle ones without any SoD violations (Workflow C), with the former handling risk analysis followed by role approval, and the latter handling only role approval; we have one path with one stage configured as "No Stage" (Workflow A); this path is used to decide which of the primary workflows to use (i.e. SoD violations or no SoD violations) using two detours; we have one detour configured to use Workflow B if any SoD violations are found in the request and another detour configured to use Workflow C if no SoD violations are found.
    Currently what happens in our tests is that requests without risks / SoD violations work fine and actually get detoured to Workflow C, awaiting role approval from the right approver ; while requests with inherent risks / SoD violations unforutnately get automatically approved and provisioned rather than being sent to Workflow B
    Any clues as to why this could be happening? We've checked if there are any settings that might be triggering it to automatically approve requests despite any risks, but can't find anything of the sort; Would be very grateful for any insight / advice on the issue.
    Thanks a lot in advance!
    Best regards,
    Sandeep

    Hi Diego!
    Once again; thank you for your quick reply!
    I did recheck the auto-provisioning issue and I can confirm that it is definitely set to "No Auto-provisioning" and it hasn't been changed recently. The strange thing is that the detour works for NO SoD violations, but doesn't work for SoD violations; find below the audit trail for detour working:
    Request XXX Submitted by Sandeep (SANDEEP) on 01/28/2012 02:04 
       Z_111111-ECC Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 02:04 
    Approved by Sandeep (SANDEEP) on behalf of Sandeep (SANDEEP) at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 02:04 
       Approved Z_111111-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request has taken a detour to path C_WORKFLOW and stage C_STAGE on 01/28/2012 02:04 
       Detour condition SOD Violations with value No is satisfied at path WORKFLOW_A and stage WORKFLOW_A
    and find below the audit trail for the detour not working:
    Request YYY Submitted by Sandeep (SANDEEP) on 01/28/2012 01:53 
       Z_222222-ECC  Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 01:53 
    Approved by Sandeep (SANDEEP)  on behalf of Sandeep (SANDEEP)  at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 01:53 
       Approved Z_222222-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request Closed By Sandeep (SANDEEP) on 01/28/2012 01:53 
    I even checked the CUA System section, and the "By system" tab and it was empty; there were no specific system configurations.
    And to answer your questions:
    Since Workflow A is the path with the Initiator, the detour flag is deactivated and the active flag is activated.
    WF B & C have both the active and detour flags activated.
    Thanks a lot again for your quick responses and all the help you've provided so far!
    Best regards,
    Sandeep

  • Update/Modify not working

    hi,
    i have ztable
    mandt key field
    ztest1  key field
    ztest2  key field
    ztest2  non key field
    when i'm trying to modify any key field, MODIFY keyword is actually adding a new record in the Database. it is because the new combination of key fields is unique.
    i tried using update statement . Update is not working as the combination key is creating a new record which is not present in Db and hence , its not updating.
    do we have any workaround on this ??
    if i update the key field same field should be updated with other fields intact
    please help.

    key field means unique record.
    if u try to change a key field it will add a new entry.
    to an existing entry with a key combination u can change only the non-key fields.
    else u need to delete the record combination and add the new combination.

  • Integrated Microphone Array not working

    Hi. I recently bought a dv6 laptop. In the beginning there were no problems with it at all, but without any (to me) apparent reason, the integrated microphone simply stopped working. I've tried several suggested solutions already; I've checked my sound setup in the control panel, everything checks out there, and I've tried uninstalling and reinstalling the IDT HD Audio Driver CODEC through the HP Recovery Manager. My laptop is running Windows 7 x64. I really need a solution to this problem, it is driving me crazy.. I'm hoping someone in here can help me..
    Thanks in advance.
    Martin

    @oluawoderu, @karen5, @M_Holmstroem
    Please provide us the complete model of your system along with the operating system, so that we can assist you in a better way.
    How to locate model number:
    Notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c00033108
    Also, please let us know the BIOS version on your notebook and installed Microphone driver version.
    Regards,
    =======================
    I am an HP employee.
    If my suggestion was helpful, you can thank me by clicking on the "Kudos" button!
    If my answer solved your problem, please feel free let the community know by clicking the "Accept as Solution" button!!

  • Keyboard modifiers not working inDesign CC

    Hello everyone
    For some reason none of my keyboard modifiers are working
    Alt, CMD, Shift, Space etc etc
    At first I just thought it was the space bar to pan, but now nothing is working - scale proportionally, nothing!
    Does anyone have any ideas?? I've changed nothing in my personal settings, and this seems to only have appeared since updating CC last night?
    Thanks in advance
    Tim

  • Help! Pavilion Dv7 Integrated mic array not working!

    Ok ive looked at many forums and couldnt find a solution i recently booted my laptop and didnt have a driver backup so i manually downloaded and installed all the correct drivers everything seems to be functioning correctly accept the mic. in the recording section of the sound control panel all i see is external mic, integrated mic, and stereo mix. my problem is that when i listen to my int. mic array all i hear is static, i turned down the levels and it still didnt work; i updated but the problem kept occuring. any help; i think its the idt codec idk but help please!

    Raddy_Srey
    The following steps were posted by @DavidPK. I am copying the steps I want you to try rather than just linking you the thread as it is quite long. I am also providing a link to the thread below.
    “Right click the speaker icon in the Taskbar and select Playback Devices. Click the Recording tab, right click the 'Integrated Microphone array' and select Properties. Click the Microphone Enhancements tab and put a tick in the box next to 'Disable microphone enhancements'. Click Apply and Ok to save this change and the restart the notebook - has this made any difference?”
    The thread named “ internal microphone not working on pavilion dv7” is linked below.
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and​-Audio/internal-microphone-not-working-on-pavilion​...
    If this does not resolve your issue please re-post so we can continue.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Droid Turbo Advanced Calling/ Internet Features Do Not Work!!!

    This is my 2nd Droid Turbo since the phone came out last November. The first one had to be replaced because all the apps and the phone kept crashing. Let me just say that VERIZON and MOTOROLA both have some of the WORST Tech support I have ever experienced with a phone. I know more about these phones then they do. I even already know all the troubleshooting that they are going to make me do and waste my time!
    I clearly tell the Level 2 tech support person that yes, Advanced Calling is enabled on my phone and on my account. Yes, it worked fine on my last Droid Turbo. As soon as I make a phone call the 4gLTE disappears and the phone says I have no Data Connection. I can't get on the internet unless I'm using WiFi. So ofcourse they try to trouble shoot it and that doesn't work so then they get Motorola on the line and this girl knows even less than the last one. On top of that she can't even speak English. Are you ************ kidding me!   What a wast of my time. In the end they couldn't fix ********
    I'll never buy another Motorola phone and I'll probably just cancel Verizon since they don't have service in my area anyway. Which btw, I live in LA but my house is on top of a hill where Verizon has no service so they told me I can cancel my contract anytime. Too bad for them!

    When you say "does not work," what does that mean, exactly? What happens? Any error messages?

  • Integrated Camera is not working in vista

    I have recently upgraded my 3000 N100 lenovo Laptop from Xp to vista 32bits, and have plenty of problems but thank God i solved almost all the problems except the camera issue. I downloaded the newest driver for windows vista from lenovo.com but still not working. Any help will be appreciated.

    I don't have a issue with my webcam. But try a program called DRIVERMAX. It can detect unknown drivers and find the driver. Works for all windows I think. It is free but will only let you install 2 drivers a day. Try it. It also can back up all your drivers. Perfect for reinstalls. If there is a driver for your webcam, this will know what it is.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Sharepoint Integration with Reader not working?

    Hi
    Since upgrading reader to version 11, i no longer get popups asking to check out a pdf docwhich gets opened via sharepoint 2013.
    Once opened, there is no longer the "Sharepoint/Office 365 Server" option available in the "File" menu item.
    If I choose "File"-"Open" and paste the url of the file, and then open, I do get the prompt to "Checkout".
    Any ideas on why this is not working from Internet Explorer directly.

    Hi seanl_1111,
    When was the last time it was working fine?
    What type of access you have on the SharePoint site?
    Regards,
    Ajlan Huda.

  • Message Monitoring Tool in RWB for Integration Engine Messages not working

    Hi all
    We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine.  Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the  left side and also the payload cannot be seen.
    We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
    Seems to me as we forgot a setting after installation, but which??
    Thanks in advance for  your help.
    Oliver

    Hi Oliver,
    I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
    Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
    Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
    Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
    I hope it helps,
    Marcelo Vieira

  • Reading Advanced Metadata in Smart Collections, not working in Bridge CS6

    In Bridge CS5 you could make an Smart collection that were looking for: All metadata > contains > "here we add a value from a metadata only visible from the Advanced tab in File info"
    But this nolonger works in CS6.
    Although I can go to File info and see the metadata value that are visible from Advanced. But the option All metadata, clearly doesn't support the advanced metadata in the file in CS6.
    Could this be a bug in CS6?

    If any one like to try this yourself and get same or other result, please let me know!
    Otherwise this must be a bug to report to Adobe.
    I don't have CS5 installed anymore but CS6 is still present while I use Bridge CC for my daily workflow (MacPro MacOSX 10.8.5).
    I first copied 4 DNG files from my main folder to a subfolder. Those files I added a name to the IPTC extension persons name and saved.
    Checked and this name shows in the IPTC extension persons name field in Metadata panel as well as in Advanced Tab in File Info IPTC Extended Properties / IPTC4xmpExt:PersonInImage(Bag container).
    I closed the subfolder and used the smart collection icon to bring up the Find window.
    I then selected All metadata and filled in the persons name, had subfolders and non indexed already included and put the source field to the main DNG folder.
    The result was almost instant with the 4 files showing.
    I then quitted Bridge CC and started Bridge CS6
    Since I had not used this for a while and my main folder contained 4500 DNG I set the cache quality icon to embedded only. Selected the same folder and followed the same procedure as in CC.
    Naturally it took a bit longer because the files needed to be indexed first, yet after this the result was still the same, the 4 DNG files with the persons name showed in the smart collection.
    So on my behalf I can't reproduce your problem and for me it is not a bug also I'm afraid.

  • Thinkpad Yoga integrated camera is not working

    Hi there,
    I have a problem with integrated camera in my Thinkapad Yoga. The camera doesn't work. In manager device there is no such thing like camera. I have installed the newest drivers from Lenovo website but is didn't help. Lenovo Solution Center is reporting about unknown device which is not installed but i can't figure it out what is it.

    Hi,
    Camera is a USB device. Try updating the USB hub drivers. Update BIOS to the latest version as well. Now try installing the camera drivers.
    If it didn’t help, it sounds like a hardware issue with your camera. The cable might have got unplugged or the camera itself would have gone faulty. I would strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Modifiers not working on external keypad

    I just purchased an external keypad for my new MacBook Pro to use with Adobe After Effects. There are a few shortcut commands that are only accessible through the keypad that I would like to use. Most of them have been working, but for some reason modifier keys don't seem to have any effect. For example, the shortcuts for rotation are '+' and '-' (only on the keypad), and the shortcut for scale is cmd + '+' and cmd + '-' (also only on the keypad). But whether I'm pressing the command key or not, the + and - keys only affect the rotation. Is there any way to fix this problem? Perhaps with a program like Ukelele? It's a Dynex keypad, which I hear now is a terrible brand: perhaps it's just not designed correctly? Thanks!

    Same here. I am working on MBP (late 2008) with external monitor, sometimes expose shows all windows on the internal MBP screen instead of the external monitor. It is very annoying, only restart fixes it (for a while).
    Also sometimes the MBP does not correctly wake from sleep with external monitor connected, both screens remain blue and I have to restart the MBP again.

Maybe you are looking for