HTML Scrolling not working on Phone and Tablet versions

Hi - I've created a website across the 3 different platforms. My client has requested a blog - I've used Tumblr - I inserted this HTML for it:
<iframe src="http://no4styling.tumblr.com/" width="791" height="450" marginwidth="0" marginheight="0" frameborder="no" scrolling="yes" style="border:0px;"></iframe>
This HTML works on the desktop version but not on the Phone and Tablet version. Please can someone let me know where I have gone wrong??
Thanks

Hi,
I suspect there is some custom script on your site, which might be creating the issue. Please refer to the following link http://forums.adobe.com/message/5688844#5688844
Please check for any such script as mentioned in that post and try removing it.
Regards,
Aish

Similar Messages

2 pages not loading on phone and tablet

Not all pages work on phone and tablet for my website... thegreatlifecookbook.com
The desktop layout correctly loads on the phone and tablet, but the buy now page and the cookbook page are blank.
No problems with the site on the computer.
Have any ideas? Thanks so much....////Julie

It appears you created Tablet and Phone layouts in the Muse Plan mode, but never put any content on the pages, and then published. Thus when you visit your home page on a desktop device you get the desktop layout (which appears correct) but when you visit from a phone or tablet you get the Tablet or Phone layout from the Muse plan view. Those are blank.
You'll want to Page > Remove Alternate Layout for the Tablet and Phone layouts in Muse and re-publish, so your site is no longer re-directing to blank pages when loaded on a Tablet or Phone.
In the future if/when you create a complete Phone or Tablet layout and re-publish, your site visitors will automatically be directed to the layout appropriate to their device (and it won't be blank since you will have created a device specific alternate layout).

'Phone' and 'Tablet' versions of Tumblr blog embedded into Muse

Hi, I have managed to embed a Tumblr blog into my 'Desktop' Muse website which works fine however my problem is when I go to create 'Phone' and 'Tablet' versions the blog is cropped. Does Tumblr have Moblie Site formats to use for these formats or can anyone recommend a way to have the blog as a moble site?
Many thanks =)

I'd like to know it too.
PLease share w/ us if if have a solution
Tks!

Phone and Tablet versions are too small

When using a phone or tablet to view my website www.elrocco.com.au the pages are too small.
The desktop version is fine.
I use GoDaddy for domain management and forward to elrocco.businesscatalyst.com
When I use the url elrocco.businesscatalyst.com directly on the phone or tablet, everything is fine.
Is threre something I need to do on GoDaddy to ensure the phone and tablet versions display correctly?
Thanks in advance for you help.

It appears you were able to figure this out as the site looks just fine (and identical to the BC's system domain) when viewed through an iPhone.
Thanks,
Vinayak

Anchor links in HTML newsletters not working in iOS8 and above

I used to receive daily HTML email newsletters with links anchor down to detailed content. The links were working fine in all the previous versions. After upgrading to iOS 8, the internal hyperlinks (anchor links - both named as well as id) are not working. It takes me to nowhere and shows an error message id. This seems to be very specific with iOS 8 and there is no HTML code support to overcome this issue.
Can Apple fix this issue at the earliest as it is very difficult to scroll up and down every time to read the contents of the email newletters?

I used to receive daily HTML email newsletters with links anchor down to detailed content. The links were working fine in all the previous versions. After upgrading to iOS 8, the internal hyperlinks (anchor links - both named as well as id) are not working. It takes me to nowhere and shows an error message id. This seems to be very specific with iOS 8 and there is no HTML code support to overcome this issue.
Can Apple fix this issue at the earliest as it is very difficult to scroll up and down every time to read the contents of the email newletters?

Wi-fi not working on phone and touch

i have a touch and phone both on 2.0 wifi was working fine till last night..i have restored just the iphone and restored it fresh(not backup) and still wifi not working but both will connect to other wifi's in my neighborhood..i have a netgear WGR614 V6 router..and i doubt it is the router because i have a laptop connected to the wifi..does anyone know how to fix this..thanks

I suspect the problem is in the way DHCP works with the iPhone/iPod Touch. A simple workaround for me was to assign an IP address manually to the iPhone outside of the range of the DHCP server on the router. This works well for me for some reason.
Now for a little more information: I use a simple WEP 64-bit key (or 48 bit depending on how you count it) on my router and I connect to many other wireless access points as well (university, friends' homes, etc.). I noticed that the very first time I connect, the DHCP server will give me an address. If that address is wrong, I will be stuck with that address forever and will be unable to change it even if I do that manually. It appears that no amount of resetting and forgetting the network etc. will work. At home, it is an autogenerated address, which of course does not work with the router at all.
The same happened with my University network, but I was able to revalidate the new IP address and have the university router system accept it as a valid IP and so the iPhone now can connect - but the IP address is the same as before. I also noticed that if I put something in the "Client ID" field on the iPhone, that information is not changed even if I erase it manually.
I do not know why this happens and I haven't debugged to the point of sniffing the network. This happened with my father's old iPhone 1.0 as well, but I was able to reset the parameters in his phone. No such luck in mine...

Problems with phone and tablet version and presentation images

hello,
us to explain the problems encountered with Adobe Muse
pointing out That We Already have published a website designed with Adobe Muse, about two months ago, without finding any kind of problem, for this reason we believe That the problem does not depend on us
1. the site properly sets in three versions (desktop, tablet and phone) and visible only in the desktop version Also from smartphones and tablets.
2. all photos included in the 'presentations' or galleries poprie the program does not display it in local preview it after publication.
note: we use the exported files in html and uploaded in our domain
you can redraw the program to see if the update was performed to Muse DC Correctly or use the old version Which at least gave no problems with image galleries?
thanks greetings

The problem I am having is this: The phone and message portion of my palm stopped working. I called my provider and they told me I needed a new sim card. I got a new one and put it in and still experienced the problem. It was a complete stoppage. I could call one out of 10 tries and a message or two came through but late. I then called Palm and they walked me through a hard reset and the phone started working, ...but only for the evening. Now again it is at the same place. I have hard reset it several times and occasionally it will work once or twice after that. ....
Dan
Post relates to: Treo 680 (Rogers)

Radios not working: Missing MEID and Baseband version after battery swap

Upon booting up after swapping batteries last week, I noticed that I wasn't getting any service (voice, 3G, 4G, etc.). I have seen this issue in the past, but it always fixes itself after a reboot. Not this time however.
I have rebooted, battery pulled, and even factory reset with no luck. Radios are still not working. I noticed in the settings> about phone> baseband version says unknown, and when dialing *#06#, the MEID is blank.
Phone is running stock 4.1.1, not rooted. Any ideas? Is it possible my radios were corrupted randomly, or maybe a hardware failure? If it's a software issue, how do I go about fixing it? Please help!

Unfortunately, this sounds like a case of the bad hardware blues, jsw5050.
In that case, if there is still warranty on the phone, I recommend getting a replacement.
We need to make sure there is no physical or liquid damage (including corrosion in or around the charging port) in order for it to be replaced under warranty.
Tamara H.
Follow us on Twitter @VZWSupport

I have created a series of pdf schematics in a portfolio that revolves. For the field service techs I would like it to work on a smart phone or tablet. On the phones and tablet, they do not revolve. Any idea's?

I have created a series of pdf schematics in a portfolio that revolves. For the field service techs I would like it to work on a smart phone or tablet. On the phones and tablet, they do not revolve. Any idea's? I am using Adobe Acrobat 9 Pro. It looks great and works as expected on my system, but the techs cannot scroll through the different prints.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Today I deleted a gmail account using my computer. I also added a new work gmail address. Now I want to sync my phone and tablet with the new email address. I've looked all over and can't find out how to do it.

Today I deleted a gmail account using my computer. I also added a new work gmail address. Now I want to sync my phone and tablet with the new email address. I've looked all over and can't find out how to do it.
Peg

Hi there T&P63385!
Look no further! I have the answer for you! You can add a new email account to your android device by following these steps: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31401
Now I do want to let you know that your phone has a "main" gmail account. If this "main" gmail account was the one you deleted it may be best that you reset your phone and activate it to your new gmail address.
The reason I recommend doing this is all of your purchased application information is also tied to your gmail.
Ensure your personal information is backed up (contacts, pictures, etc) and follow these steps to Hard Reset your phone:http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31308
Let me know if you have any other questions!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport

My mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

Hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india

hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india it is i phone 4s

saikumar3 wrote:
...it is purshecd in kuwait can i get replace in india it is i phone 4s
No, warranty is not International and is only valid in country of purchase.

Screen locking up and auto rotation not working on phone wakeup

Since updating to iOS8 my iPhone 5 and 5s will lock up when waking the phone. I also have noticed that the screen rotation does not work riight away and is sluggish. Certain apps tend to freeze which could be that they need an update themselves. It is a shame that Apple has resorted to using its customers as beta testers for their software. As a die hard Apple fan it is getting harder to stay true to the company. Apple should be leading not playing catch up which is why I think theses major software issues develop.

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks!

HTML Scrolling not working on Phone and Tablet versions

Similar Messages

Maybe you are looking for