HTMl Signature not showing properly when reply/forward a message.

Hi
I am a new user of Outlook 2013, I have a HTML signature which worked properly in Outlook 2010.
The signature also work properly in Outlook 2013, when I am sending a new message, but the problem arise when I try to reply/forward a message. My replied/forwarded message came to right side. Which should be under my email signature.
Can anyone help me for resolve the issue.
Thanks for your time
Kind Regards
Sayem

Hi,
From the description, when you reply/forward an email, the signature appears under the quoted email, am I correct?
Have you tried open Outlook in safe mode and test again? Press Windows key + R to open the Run command, type
outlook /safe and press Enter.
In addition, please try recreating the signature and test again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • Document not showing properly when opening in Acrobat 9 Pro

    When I create a document in InDesign and export it as a PDF, I want to see what it looks like as the PDF. One of the documents that I opened does not look as it should. It only has the photo on the ad but is missing the red background and the words on the ad. As a thumbnail, it looks correct. But, it is not showing up correctly when I open it in Acrobat. Some of the other ads are fine but this one in particular is not showing me all the elements. What do I do to fix this?

    Yes, I have the most current version of AA9. I exported the document from InDesign using the PDF exporter. That is what I have used for years and it has worked fine. I just installed CS4 yesterday.
    I think I realized what the problem is but I don't know how to fix it properly. I actually went back to the preferences in AA9 to the document color options in accessibility and changed it back to its original state (which, I believe, is where nothing is checked). I had originally changed it because I was trying to experiment with the background of the program. It's black and when I open a PDF, I can't see the black border. But I mistakenly changed the document color. Which brings me to the question of: how do you change the background color of the page so that I can see the black border on the document? I sell advertising so I need to be sure that when people send me their ads, they have black borders. And I can't tell when it has the background behind the document so dark. Acrobat Reader has a white background.
    Additionally, can I still install the latest Acrobat Reader and use that instead of AA9 if I want to? It seems easier.

  • Fonts are not showing properly when opened through mail?

    When sending a PDF via email the Frutiger font does not appear properly on an iPad or iPhone. When viewed on an iPhone all the text appears as gradient boxes and when viewing on an iPad font becomes too light to be legible. Is this a problem with the font in the iOS platform? I also tried opening the file in iBooks and got the same outcome.

    Does disabling hardware acceleration have a positive effect or is it still happening?
    https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • Gmail message text box does not show up when I click on message to read it. Text will appear quoted if I click in Reply box.

    When I open Gmail, I get the usual list of messages. When I click on a message to read it, everything appears as usual except the box with the message text in it. To see that text, I have to click in the Reply box, and then I'll see the original message text quoted.
    This is true on three different Gmail accounts. I've not changed any Gmail settings. I have enabled and disabled various extensions and User Styles that affect Gmail, and turned off Greasemonkey, without effect.
    Yesterday I did update Java 7 update 10, but Gmail was still working after that. I did install several new extensions at that time, but I tried disabling them and restarting, and the problem persisted.
    Please help. Thanks.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HTML text not showing properly in CR 11

    I am trying to display the html text in the crystal report but the first screen shot displays something ugly text interpretation:
    But when i change the text interpretation to HTML then instead of showing nice html tags like ul, li AND table tags it is not recognizing the html tags at all
    is there any way to display the html nicely???????

    Not all HTML tags are supported by CR.
    Per KB 1657131, the supported HTML tags in CR2008 and later are:
    html
    body
    div (causes a paragraph break)
    tr (causes only a paragraph break; does not preserve column structure of a table)
    span
    font
    p (causes a paragraph break) 
    br (causes a paragraph break)
    h1 (causes a paragraph break, makes the font bold & twice default size)
    h2 (causes a paragraph break, makes the font bold & 1.5 times default size)
    h3 (causes a paragraph break, makes the font bold & 9/8 default size)
    h4 (causes a paragraph break, makes the font bold)
    h5 (causes a paragraph break, makes the font bold & 5/6 default size)
    h6 (causes a paragraph break, makes the font bold & 5/8 default size)
    center
    big (increases font size by 2 points)
    small (decreases font size by 2 points if it's 8 points or larger)
    b
    i
    s
    strike
    u
    strong
    ol (ordered list)
    ul (unordered list)
    li (list item)
    -Abhilash

  • My graphics are not showing properly when online, does anyone know how to rectify this? everything was ok when i was on google chrome now all i get is a white background with black and blue colours grrr

    i just got a basic screen with white background, black and script

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

    my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

    Gray, Blue or White screen at boot, w/spinner/progress bar

  • Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

    Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

    Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
    Many thanks.

  • Thai characters not showing properly

    Hi,
    When creating a product catalog in thai language the characters do not show properly. The characters have small aspects attached to them that hover above as you can see here http://www.gte-premium.com but when editing in Indesign the small aspects that are meant to hover above overlap the portion of the character below and are not aligned left to right properly.
    I have tried every thai-friendly font I can find but this does not fix the problem, how can I amend this?
    Thanks in advance

    If you're using a well-made font, you can probably get the tone marks to behave by turning on the World-Ready Composer. It's exposed in InDesign CC and CS6, in the Paragraph menu I think, but if you're using an earlier version of InDesign it's a hidden feature that you would need to use a script or a plugin to turn on.

  • Our illustrator files are not showing up when uploaded to creative cloud.

    Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

    If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
    You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

  • ITunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.

    iTunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.  I reconnect to iTunes and it shows the music and books as being loaded on my iPod.
    Sometimes the audiobook will play, then disappear from iPod's play menu after I reconnect to iTunes and load more music.  I've got plenty of free memory, and iTunes shows the files still on iPod.
    ....or should I just roll it back to iOS 5...  never had these kinds of issues with the old OS.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all AB and resync
    To delete all ADgo to Settings>General>Usage>Storage>Manage Storage>AB and try deleting them from there
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • HT1304 I have an iphone5 and i did the upgrade.  Now all of the music videos that I have purchased on itunes do not show up when the phone is held horizontally.  It is just a picture of album covers.  Any thoughts?

    I have an iphone 5 and I did the upgrade.  Now all of the music videos that I purchased on itunes do not show up when I hold the phone horizontally.  It is just a picture of album covers.  Any thoughts?
    thank you

    someone swapped upgrades.  Phone could have been sold For quick cash. 

Maybe you are looking for

  • Report Fails on New Server - Looking for CrystalXIRuntime.msi

    Hi - I have been trying to migrate to a new webserver but cannot get one of my apps to run,   Our former developer - who I cannot find - used Crystal Runtime in a reporting app and I cannot seem to get the right version of the runtime installed on th

  • AppleTV versus an old iBook with new iTunes hooked to TV?

    Would it not be possible to take an old G3 500mhz iBook running 10.4 and with an airport card talking to an older Airport Base Station (802.11b) and put iTunes 7.6 on the G3 and download rented movies down to that and then have that hooked via the av

  • Importing iweb site from one mac to another

    i have a website made with 09 on my g5 tower and published to a host. I have a copy on a thumb drive so I can work on it on my pb when I travel but I can't seem to navigate to it or open it. I know this must be possible but I cannot find out how. Tha

  • Memory & Export & Media Encoder

    Problem 1: Is there in CS4 a way to export a standard DV AVI file (standard DV 4:3 source material) without having to use Media Encoder?   In older versions of Premiere (CS2 for example) all I had to do was "Export to Movie" which created an AVI file

  • Connect from OS/390 to Oracle on NT

    We need to connect to Oracle on an NT platform from an OS/390 system. I have seen a reference to something called Oracle Access Manager that purports to do this but I can't find any info on this product. Can anyone tell me if this product is still of