HTML Snippet was working on iWeb 08 but not now on iWeb 09
Having upgraded to iWeb 09 from iWeb 08, suddenly I am unable to upload slideshows using a third party program called "SlideShowPro for Lightroom" successfully. They embed in iWeb fine but once they export they do not show up online. So, in short the slideshow shows up online but do not show up embedded onto the final iWeb page.
Link to unembedded slideshow (which works fine)...
http://www.jonnyback.com/lightroom_slideshows/markandemma/loader.swf
Link to website without slideshow showing up...
http://www.jonnyback.com/markandemma3
Code used to embed slideshow in HTML Snippet inside of iWeb 09 (which previsouly worked in iWeb 08)
http://www.jonnyback.com/markandemma3code
Finally, here is a screen grab of iWeb09 showing my site and how the slideshow is fine in iWeb but isn't once it is exported...
http://www.jonnyback.com/downloads/iWeb_Screenshot.jpg
Here is an example of a page which I uploaded from iWeb 08, and it works fine, but only because I exported it to a folder whilst I was still using iWeb 08...
http://www.jonnyback.com/mattandanna
The Slideshow also shows up here fine...
http://www.jonnyback.com/markandemma3files/widget0markup.html
And iWeb can not get a native iWeb Photo Gallery loading online in a similar way, it just doesn't show up online either...
http://www.jonnyback.com/markandemma2iwebphoto
I've tried loading the page on a different server with the same issue, the Slideshow Pro gallery just does not show.
Any advice would be greatly appreciated,
Jonny
Thank you Roddy, I have done my homework but it isn't wokring yet.
In the iWeb native Photo Gallery page, I have come up with the scenario again where it works in a subfolder...
http://www.jonnyback.com/Site/markandemma2iwebphototest.html
But not on the normal website domain...
http://www.jonnyback.com/markandemma2iwebphototest.html
As a check I did find out that the Slideshow still doesn't work with the subfolder "/Site" scenario...
http://www.jonnyback.com/Site/markandemma3
How bizarre!
Any ideas?
Similar Messages
-
Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Trying to play playlist on Apple TV. It worked at one time, but not now. Home sharing is on, on the computer; but apple TV keeps asking me to turn home sharing on.
What gives?Hello hobartco,
Home sharing will, indeed, need to be set up on your Apple TV, as well.
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation)
http://support.apple.com/kb/HT4352
Cheers,
Allen -
Web package, containing mix of html/js/swf, works off remote server but not locally
I have been using Cisco certification training materials for
months now and have had no problems. Except today.
The front index.html page, which links to swf content,
stopped redirecting me to individual chapters.
Normally, I get a front page, containing flash animation, and
a drop down list of chapters. On picking a chapter, a new,
full-screen browser window opens up. Now, I get the front page,
with its flash animation, but when I pick a chapter, nothing
happens. (The big window does not open up.)
I am using Firefox 2.0.0.13 on an intel-based macbook pro.
I have flash player MAC 9,0,124,0 installed (it was ,115 but
I installed the new version in the hopes that it would fix the
problem - to no avail).
Nothing in my machine or setup has changed.
The Error Console of firefox reports:
Error: Warning: unrecognized command line flag
-psn_0_14942209
Source File:
file:///Applications/Firefox.app/Contents/MacOS/components/nsBrowserContentHandler.js
Line: 706
This seems to be a javascript problem ? But javascript does
not give errors on other pages. I think it may be a problem of
interaction between javascript and flash.
NOTHING has changed on my laptop since I last used the Cisco
training materials on 10 April. This is very baffling to me!
My hunch is that some software was updated on my machine -
probably flash software - and this has impacted the application.
I have tried the following:
- tried running the material on Safari, but had exactly the
same behaviour as above. However, I never tried running the
material on Safari, so I cannot say that it worked before.
- tried running the material on a Windows Parallels emulator
on the mac, and had exactly the same behaviour as above. Again, it
had never worked on that platform/environment.
- i installed a debug version of the flash player - there
were no odd messages in the log at all.
- i uninstalled flash and then reinstalled an older version -
same behaviour.
- i noticed that the Error console lists a lot of warning
messages to do with Javascript.
- i ran the materials off the official Cisco server, not from
a local copy as detailed above. i had no problems (a big window
opened up).
HELP!These files are 404 not found on server. Did you upload them?
<script type="text/javascript" src="js/popup.js"></script>
<link rel="stylesheet" href="css/popup.css">
Nancy O. -
Firefox will not let me back up bookmarks worked earlier in April but not now
My bookmarks will not save. I try backing up in downloads section for Windows 8.1 Update 1 and desktop section but nothing. just wont save. Worked back on April 24. Recently I just updated my Adobe applications and Adobe Edge Code CC took over the default file. Maybe that is causing it? I dont remember what the original file was but image was white. Is it notepad or wordpad? Those are the 2 other programs show when I hover over open with after right clicking a prior back up. Anyone know a fix or if this is widespread bug? If its one of those 2 programs and I just have to change back can someone tell me? Any help would be great.
What steps are you following to create the backup -- is it the method described in this article: [[Restore bookmarks from backup or move them to another computer]]?
If Windows is not showing the full names of some Firefox files, for example, if it is hiding extensions such as .js and .json, please switch the Windows setting so you can identify the files as accurately as possible. These Microsoft support articles has some different approaches (you probably need to use the "Desktop" side of Windows 8.1 for this):
* http://support.microsoft.com/kb/865219
* http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions -
Html marquee : stop() and start() work on firefox 26 but not on 27
this html/javascript line works on firefox 26 but not on firefox 27
<marquee onMouseOver='this.stop();' OnMouseOut='this.start();'>Hello</marquee>
Why ?Thanks of lot, it works !
-
My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.
Hello wilsontot_too,
Thank you for the details of the issue you are experiencing on your iPhone. It sounds like you are not noticing transparency on your iPhone. It may be that you have "Increase Contrast" turned on in your iPhone settings.
I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
iPhone User Guide - Large, bold, and high-contrast text
http://help.apple.com/iphone/7/#/iph73b89c6
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network. While it can detect networks, it cannot connect to any (have tried at home and at work). I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off. None of the typical solutions I can find online seem to work. HELP!
You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments.
http://support.apple.com/kb/HT4199
If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. -
HP LaserJet 2100M was working - but not now
I'm working with a customer with a B/W G3 that was running Mac OS 8.6 connected to a LaserJet 2100M with the HP DirectCard J4135A, which has a USB port. This worked fine. The person took their system to a local Mac shop, where they added a bunch of RAM, upgraded to 9.2.2 and 10.4.9 and then returned system to the customer, where they have had no end of grief due to SCSI scanner that is critical to their work, etc. etc. They looked me up and I've resolved most of their issues, but am having a heck of a time with the printer. When started up in Mac OS 10.4.9, we have no problem printing. When started up in Mac OS 9.2.2 (not Classic) I am unable to create a Desktop Printer. I use the Apple Desktop Printer Utility (vs. 1.31), choose the printer via Apple USB, then choose the correct PPD, then click on create and it acts like it's doing it and the open window takes on the name I give it, but no icon shows up on the desktop and if we try to quite the utility, we still are unable to print to the LaserJet. I've used the same utility to delete any it thinks have been created, I've trashed any printer related prefs I could find in the System Folder/Preferences/etc. but no dice. I've done this a bunch of times with other systems, typically without issue. Originally the printer was connected through a hub, but is now connected directly to a USB port on the G3. And like I say, if we start up in Mac Os 10.4.9, it prints just fine.
Stumped!The issue turned out to be in incomplete install of Mac Os 9.2.2 by a local "Apple Authorized" service provider. I think they installed a Classic support only version of Mac OS 9 and this customer needed a full version of 9 for SCSI support, etc. Once a real OS 9 was installed and updated to 9.2.2, I had no problem with the printer, or the Desktop Printer Utility required to create the desktop printer.
-
I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?
Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen. -
I have bought the wireless keyboard for my iPad. I was working for a day but now the power light won't stay on and as such won't connect to the iPad. I have changed the batteries but still no difference.
Not knowing which wireless keyboard you bought, it is difficult to be specific. but ...
it is quite normal for the keyboard's power light not to stay on - it is a way of conserving battery power.
Try this:
turn you keyboard off
on your iPad go to Settings > Bluetooth
if your keyboard is listed under Devices, then touch the little blue i to its right and choose Forget this Device
now reset your iPad: hold both the Home and Power buttons down for about 10 seconds until the Apple logo appears, let go promptly when the Apple logo appears and wait another 30 seconds for your iPad to turn itself on
After your iPad is back on again go back to Settings > Bluetooth
now turn your keyboard back on and see if it appeard under Now Discoverable
if it doesn't read your keyboard guide to figure out how to put it into Discovery mode
touch the listing for your keyboard under Now Discoverable, it should now appear under Devices
touch the listing for you keyboard under Devices, and choose to pair with it. -
Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.
HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?
Hi pwillener,
Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
. This works in full size computer browsers but not in an iPad.
My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
Bryan -
I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I have iPhone 4 which i bought from Bahrain and it was working there just fine. However, now I'm in India but my phone is not supporting any SIM. What can I do please suggest guys? Thanks in advance
Sounds like your iPhone is locked to the wireless carrier you used
in Bahrain. Contact that wireless carrier to see if they offer unlocking
and if you qualify. Only the carrier to which the iPhone is locked
can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Remember that the warranty is not international. You will have to
return the iPhone to Bahrain for repair/replacement if it needs service. -
Why can't I play a certain song on my iPad Mini when it was working the day before, but after syncing it to my iMac, it won't work on both my iPad and my iMac. Plz help
Accidents happen, and apple can certainly assist you with replacement of said device. Most manufacters would tell you to buy a brand new retail unit, apple will charge you about half price for a replacement unit. I agree its unfortunate that it happend, but expecting a free replacement is just going to lead to disappointment
Maybe you are looking for
-
Okay so after making a backup and restoring my Ipod touch, I was working on getting the backup back into it. It goes on smoothly until it runs into one song and then stops completely, freezing Itunes and after a while my computer until the error that
-
How do i share itunes music? I have a Mac and she is on Windows. She does not have an iTunes or iCloud ID.
-
Need Help with a JAVA programming assignment
How do I write a JAVA program that could be used as the start of an MS-DOS/Windows simulation of the IEEE 802.3 protocol? I am to only code the parts necessary to build the 802.3 frame. For the initial implementation, the Checksum function need not b
-
My company IronPort has limited outgoing mail attachment size to 13MB. Recently, I found that when I send a mail attached with a rar file (10MB), the IronPort has detected the message size is over 13MB. Actually, the message body contains few words a
-
Which has more demand in the current job market ? - Peoplesoft or SAP - HR ? I am planning to take up one of these two and do a complete course/certification on it . Pls advice