Html snippnets not showing up

hi
i'm trying to embed videos from vimeo but can't seem to add the embed link to html snippnets. It was working before but after upgrading to iWeb 3.0.4 it stop working. When I double click on it, it get a blue box instead and that's all. Any help on this?
i'm using 10.6.8, iweb9.
best
jzedT

Hi!
strange. after moving the iWeb app to app folder, it works great!
Kind of nice finding this simple workaround.
best

Similar Messages

HTML Snippets not showing on online site.

Hi, I really hope someone can help me. Basically my Html snippets/widgets are not appearing on my online website. They are there when i publish to my desktop but as soon as i publish it online they disappear?..I can however see them in the public html content file but they seem to be in a widget html file of their own and not part of the main html page source file.
Is this why i can't see them?..Do i need to move the html widget file to view it as part of the page.
All suggestions welcome..MAny thanks.
Ali

Thanks, I did need to do what you suggested and it has me half way there. The only thing is now the graphics of the html button i created are not showing only the 'text of the paypal link' where the button should be, the link works, it's just the buttons not there..
Anymore suggests please.
Thanks,
Ali

HTML text not showing properly in CR 11

I am trying to display the html text in the crystal report but the first screen shot displays something ugly text interpretation:
But when i change the text interpretation to HTML then instead of showing nice html tags like ul, li AND table tags it is not recognizing the html tags at all
is there any way to display the html nicely???????

Not all HTML tags are supported by CR.
Per KB 1657131, the supported HTML tags in CR2008 and later are:
html
body
div (causes a paragraph break)
tr (causes only a paragraph break; does not preserve column structure of a table)
span
font
p (causes a paragraph break)
br (causes a paragraph break)
h1 (causes a paragraph break, makes the font bold & twice default size)
h2 (causes a paragraph break, makes the font bold & 1.5 times default size)
h3 (causes a paragraph break, makes the font bold & 9/8 default size)
h4 (causes a paragraph break, makes the font bold)
h5 (causes a paragraph break, makes the font bold & 5/6 default size)
h6 (causes a paragraph break, makes the font bold & 5/8 default size)
center
big (increases font size by 2 points)
small (decreases font size by 2 points if it's 8 points or larger)
b
i
s
strike
u
strong
ol (ordered list)
ul (unordered list)
li (list item)
-Abhilash

KM document iview with HTML content not showing pictures

Hello Experts,
I am currently working on integrating a HTML page into the portal. As it is just a static page the decision was made to implement it via KM. Now when I create a "KM documents iView (w/o filter)" and point the path to the HTML file in the KM it is displaying the file, but not the images, which are stored in a folder structure below.
But when previewing the HTML file directly it shows up just fine.
Can anyone advise?
Thanks a lot,
Jan

Hi,
How you checked directly means? Are you checking from desktop or from the KM content folder.
if it is displaying properly in the KM content then automatically it should display properly in the KM document iview.
In the html file, please use only the relative path of the images that are stored in the KM content.
say starting from /irj.........
Hope it help you.
Raghu

Glossary in a RoboHelp HTML .chm not showing content on Win7

I created a RoboHelp HTML .chm with a Glossary using RoboHelp6.
My users with Windows 7 computers are unable to install and register the HHActiveX.DLL file and see the Glossary content. They are using the suggested procedure for WinXp but it does not work for Win 7.
My users with WinXP are able to install the DLL and see the content under the Glossary Tab.
My question is; what is the proper method for installing and registering the HHActiveX.DLL file on a Win7 machine?
Or is there a different file needed on Win 7 to make the Glossary content visible?
Note they can see the Glossary Tab but the content is blank.
Here is the procedure that works on WinXP:
1. Copy/save the attached HHActiveX.DLL file to the root of C:
To manually register HHActiveX.DLL: You can provide these instructions to your end users if you are distributing HHActiveX.DLL with your Help system.
Click the Windows Start button, then select Run.
In Open, type the following:
regsvr32 <path> hhactivex.dll (specify the path of the HHActiveX.DLL)
If the HHActiveX.DLL file is stored on the root of C: then I believe the command to type would be “regsvr32 C:hhactivex.dll”
Click OK.
Note: These instructions may require admin logon to complete.
Thanks for any guidance.
Bob

Please check the thread
http://forums.adobe.com/message/3479695#3479695

Microsoft HTML output not showing content...

Good morning folks!
In addition to my previous issue with importing (now solved), I am having issues with my chosen output on my Windows XP machine.
I am attempting to compile to a Microsoft HTML Help output. All seems to go well while compiling, no errors are reported, and when I view the output, the TOC is there, and the way I would like it. However, any of the contents (book or topic), do not display in the Content Pane. I get a lovely "The page cannot be displayed" error for any of the content I wish to view. I have tried the following:
I have checked my LAN Settings are set to auto detect
I have enabled SSL 2.0, SSL 3.0, and TLS 1.0
I have set my security to Medium
I have ensured my cipher strength is 128-bit
I have also test-compiled to WebHelp and all content displays. I am sure this is a simple fix, but it is excaping me at the moment, so any tips and advice would be greatly appreciated!
Thanks and cheers!
~Hopelessly HTML-ed with How-To's

Hi there
See if this link helps.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

HTML images not showing in Mail

I've noticed that my images in emails are not loading in 3G or wifi mode. I've checked all settings and rebooted with the same results.
Anyone else experiencing anything similar? I've checked all the server and general mail settings. Gmail fetch/push address.
Thanks.

HI Trayce,
Open Mac Mail then from the menu bar click Mail / Preferences then select the Viewing tab.
Select: Display remote images in HTMl messages
Connect your iPad to your Mac. In the iTunes window under the Info tab, scroll down to: Advanced.
Select Mail Accounts. Then click the Sync button bottom right side of the iTunes window.
Restart your iPad. Hopefully images will load on your e-mail.
Also, on your iPad. Tap Settings / Mail, Contacts, and Calendars. On the right make sure: Load Remote Images is turned on.
Carolyn

HTML Images not showing in Emails

Hi,
Strange things are happening in Mail (Version 2.1.3 (753.1)) on my G5 OS 10.4.11 - images within email are not appearing i.e images of items from companies or newsletter etc only getting '?' marks where images should be.As a side issue I cannot open Safari or do Software Update - all say no Internet connection - I use FireFox mostly 3.03. If I use my MacBook which has Leopard I have non of the above issues - the preferences for Mail are set similar on both Mac's - any suggestions as to what I can do would be appreciated.
Ian

Ji Ian, I was hoping a Mail expert would see this, but it doesn't really seem a Mail problem now that I read it!
Are you saying Firefox works?
2 things to try...
Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
Try putting these numbers in Network>TCP/IP>DNS Servers...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger

HTMl Signature not showing properly when reply/forward a message.

Hi
I am a new user of Outlook 2013, I have a HTML signature which worked properly in Outlook 2010.
The signature also work properly in Outlook 2013, when I am sending a new message, but the problem arise when I try to reply/forward a message. My replied/forwarded message came to right side. Which should be under my email signature.
Can anyone help me for resolve the issue.
Thanks for your time
Kind Regards
Sayem

Hi,
From the description, when you reply/forward an email, the signature appears under the quoted email, am I correct?
Have you tried open Outlook in safe mode and test again? Press Windows key + R to open the Run command, type
outlook /safe and press Enter.
In addition, please try recreating the signature and test again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HTML comments not showing up in snippets in RH9?

I want to be able to add some HTML comments sometimes when I enter content.
For example, let's say I want a pair of HTML comments like so, with a place for text between them.

and

I created a snippet, entering the following using HTML view:

<p>Copy the text in here.</p>

When I dragged the snippet onto the topic, though, the HTML comments (lines 1 and 3 in the example) were missing. That was the whole point of the snippet: To be able to copy in the HTML comment lines.
I can open the snippet in HTML view, copy the lines, and paste them into the HTML view of the topic, of course, but I'm going to be leaving this project after it's over and don't want to have my successor pulling his/her head out wondering how to get this to work.
Suggestions?

No comment is going to appear in Design View, regardless of whether it is in a snippet, an ordinary topic or any page being edited in any HTML editor's design view. That's the whole point of comments, they are something that only appear in the HTML view.
Maybe you were hoping the content of the snippet appeared in topics rather than just the reference?
Anyway, I am sure Amebr's excellent alternative approach will work for you.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HTML Widget, not showing up

I'm experimenting with using a link to a movie on blip.tv. I have a Movies page with thumbnails and a series of Entries pages. I've copied the <embed> code from blip to the relevant Entries page and the movie appears as expected in the iWeb editor. However the thumbnail doesn't appear on the main Movies page and nothing appears when I've uploaded the site to my server.
Is it the code? Or do I need to approach this a different way?

http://www.hartbeat.com.au/
However I've stuffed the Movies page up right now trying to fix the problem. I've dropped a link somewhere. It's late at night in Australia so I'll get it back up tomorrow.

Images do not show when deployed on remote server

We are using jdeveloper 11.1.2.1, adf and integrated weblogic and remote server has weblogic where we deploy the application for testing.
We have a login.html page. when deployed and running the image in login.html does not show in FF or IE 8. It shows on IE9. when deployed on the remote server.
When deployed on the integrated server only fire fox shows the image. None of the other web browsers show the image in login,html
Here is my login.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>

<meta http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
<title>Application Login</title>
</head>
<body>
<div class="header">
<div class="head_logo"><img src="images/imageLogo.JPG" alt="DASIS Logo" height="73" width="862"/></div>
</div>
<div class="navigation"></div>
<div class="content">
<div class="contentTitle">
Welcome to ISATS online.
<hr/>
</div>
<div class="contentArea">
<p class="Arial">To login, enter your user ID and password, then click the Login button.
</p>
<form method="POST" action="j_security_check">
<TABLE CELLPADDING="5"
SUMMARY="This table contains a web form
with fields for ID and password entry." >
<TBODY>
<TR>
<TD ALIGN="right" VALIGN="top">
<span class="Arial">User ID:</span>
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="text" value="" alt="Enter User ID" name="j_username"></input>
</TD>
</TR>
<TR>
<TD ALIGN="right" VALIGN="top">
<span class="Arial">Password:</span>
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="password" name="j_password" value="" alt="Password"></input>
</TD>
</TR>
<TR>
<TD ALIGN="right" VALIGN="top" width="85">
</TD>
<TD VALIGN="top" ALIGN="left">
<input type="submit" name="submit" value="Submit"></input>
</TD>
</TR>
</TBODY>
</TABLE>
</form>
<span class="Arial">
Please contact Help Desk for assistance with the User ID and Password.
<br>
The Help Desk number is XXX) XXX-2300.
</span>
</div>
</div>
</body>
</html>
Any help is appreciated
Edited by: user597294 on Jan 11, 2012 3:58 PM
Edited by: user597294 on Jan 11, 2012 4:01 PM

The problem does not seem to be with TopLink or JPA, so you may want to post this question to a different forum, such as the JDeveloper/ADF forum at:
JDeveloper and ADF
If the image itself is being sent but not loaded, you might check that it is a display issue with the browser being used.
Best Regards,
Chris

Elements do not show up in edge file but they do in HTML file; no errors occured

I am a senior in college working on building a website for a fictional company for a year-long thesis graphic design project. In my class last semester, I learned how to use Edge Animate and created an 11 page website without any trouble. I had always kept the files saved to my flash drive, and kept a backup on my personal laptop as well as on my external hard drive. There was also a backup of the files on a disc that I turned into my professor in mid-December. All of these files worked fine at the time.
In early January, I wanted to make changes to the website so I installed a trial version of Edge Animate on my laptop. When I opened any of the edge files from any of the backups, the stage was blank and the animations did not show up on the timeline. The elements of the website still show up in the Library but they are no longer arranged on the stage. When I got back to school at the end of January, I tried opening the files on the school computers and had the same problem. I asked my professor to try the file that was saved to the disc and he encountered the same issues on his computer. All of these computers are either iMacs or Macbook Pros.
I have not recieved any error messages and did not do anything to corrupt the files or save over them. I am able to open the html files in a browser with no issues; all animations and images work fine. The only change I can think of is that Edge may have been updated over break and when I installed the trial version I installed a newer version, and for some reason the new version of the program could not properly load my project that I started on a older version in October or November of 2013.
I am happy to upload the files but I am unsure how to do that. Please let me know if there is a way to resolve this issue, or will I have to start over?
Thank you!

Try to clear your preference and restart your Animate.See if that fixes your problem
http://helpx.adobe.com/edge-animate/kb/restore-preferences-edge-animate.html
If that does not work see if there is a lloopback address lookup.
Check out the correct answer in this post to fix that http://forums.adobe.com/message/6116991
Let us know if this fixed your issue

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Some of the images are not showing up on my Blogger blog even though the HTML is there. They do show up in Opera.

Here is the link to the blog post -
http://happyholidays-blog.blogspot.com/2010/09/welcome-to-trick-or-treat-street.html
Three days ago I went to a post from last year and an image was gone. The code was there but not the image.
It doesn't get rid of all the images just certain ones and they are consistently gone. It is not a random deletion of images.
I have had images not show up on other blogger sites.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions<br />
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the <i>Media</i> tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Html snippnets not showing up

Similar Messages

Maybe you are looking for