Html system panel (no program, only idea)

Hi everyone,
I was thinking about creating a new system panel, where one could place some widgets, perform system actions, etc.
Something like dmenu, or awesome wm bar. Why not use them?
They are quite flexible, but what I miss is the rendering of html, and I mean rich html, with ajax, etc.
My idea would be to create such a minimal panel embedding webkit widget. The program would take an url argument, which
then would be rendered, of course also arguments like position and size.
In this way widget input would be very flexible. One could create for example a simple widget in php, or embed fragment of a web site.
Obviously this solution is more heavyweight then dmenu or other simple panels.
On the other hand if I look at the web then I see unlimited possibilities and great flexibility.
Anyone has some thoughts? Potential users, developers?
/Matt
Last edited by mateusz.f (2009-09-08 17:06:19)

Was the panic logged? (Blinking keyboard lights indicates a kernel panic.)
If not, see if you can cause it while not in X, and it should come out on your console.

Similar Messages

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

    Hello SDN
    While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
    "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
    Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
    Appreciate any help and points will be assigned for useful information.
    Thanks
    kumar

    Hi Dinesh
    It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
    variable_screen=X&template_id=0QUERY_TEMPLATE
    In the messages , For generation, it display:
    &CAUSE&
    The query contains selection elements with "Constant Selection". Such a
    query cannot be run in the read mode 'Read Everything at Once'.
    &SYSTEM_RESPONSE&
    The read mode is automatically converted.
    &SYS_ADMIN&
    In the Variables, I see
    &CAUSE&
    Variable <(>&<)>V1& is used in the query in such a way, that an
    optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be
    connected using OR to additional selections for <(>&<)>V2& in the
    global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill
    an interval selection in either the from-field or the to-field.
    &SYSTEM_RESPONSE&
    &WHAT_TO_DO&
    If you are able to accept the mandatory entry, you need not do
    anything. Otherwise you must work with several variables in the query.
    You can use an optional interval variable to do this.
    &SYS_ADMIN&
    For Key Figs :
    &CAUSE&
    Quantities are multiplied with values for the key figure &V2& (&V1&).
    This is not sensible.
    A basic key figure was probably defined that contain a price. Only
    addable amounts should be written on the database. Ratios and prices
    are calculated as key figures. Therefore, the system maintains the
    correct sequence, meaning summing takes place on every place and then
    the quotient is formed.
    If a 'price amount' is saved as a basic key figure after all then the
    'non-aggregated indicator' can be undone using 'Change key figure'.
    Therefore, the system carries out the multiplication (or division)
    before the summing. The key figure is then assigned to the group 'Other
    columns'.
    &WHAT_TO_DO&
    Please check the definition of the key figure &V2& (&V1&).
    <DS:TRAN.KDNN>Check or change key figure &V1&</>
    Can you please let me know how to fix this issue?
    Thanks
    Kuamr

  • System error in program CL_RSD_MULTIPROV_CHECK========CP

    Hi all,
    I work with BI 7 release, SAPKW70019 patch. I see the following message when I activate a multiprovider:
    System error in program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I cannot find a reason why this message arises. The only thing I notice is that one of the two infocubes that compose the multiprovider contains 20 key figures and one of them have the aggregation on '0CALDAY' reference characteristic (and 0CALDAY is not available). Both infocubes are activated without problem.
    Any ideas?
    Thanks a lot for the support!
    Gianluca

    Hi,
    Termination CHECK-03- issued instead of a warning
    Try this SAP Note Number: 1252207

  • System error in Program SAPLRR12 .To use posting period as denominator?

    Hi Gurus,
    In a BEx report based on 0PCA_C01 cube I have to display a col which is formula based as (weighted avg cap empl / number of months). I am using the posting period as the divisor . The coversion of posting period to number is giving error" System error in Program SAPLRR12 and form REP_CUID_WGR_L-03-... ". Is there any alternative of cexit where we can derive the month count from the period.
    Please give some idea on how to derive the posting period as number
    I am in BW 3.16.
    Roy

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

  • System error in program SAPLRSDRH and form BUILD_VIEW-3-

    Hi.
    I get the foll error when I execute a query:
    System error in program SAPLRSDRH and form BUILD_VIEW-3-
    This has started occuring since we upgraded our Oracle to 10g from 9.
    Any ideas please?
    Cheers
    Anand

    Thanks Lily.
    I saw this note. But do you think this is applicable to me? I don't have any massive concurrent query usage situation. Currently I am the only user testing the queries in PRD after an Oracle upgrade. Do you think the upgrade has anything to with this issue?
    Cheers
    Anand

  • HT4597 I can no longer access my mac mail in the Mail program - only on icloud. I would like to have both my aol account and mac account in one place like it was. Anything I can do?

    I can no longer access my mac mail in the Mail program - only on icloud. I would like to have both my aol account and mac account in one place like it was. Anything I can do?

    iCloud's mail server settings are different from MobileMe's. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    iCloud cannot access your AOL account (the MobileMe facility for checking external POP accounts does not exist in iCloud) - you will have to do this in the Mail application in the usual way. You could of course set up forwarding from your AOL account to iCloud (assuming they provide this facility) but you will not be able to reply using iCloud's SMTP server with anything other than the iCloud address as the 'From' address.

  • I have not bought only one program only

    I have not bought only one program only
    It SSH
    Gath message from you it was reported that I bought three programs and this is not true
    This is the body of the message
    Or maybe pressed Balkhtae
    Can canceling
    Greetings,
    Billed To:
    Tamer Salama
    EGY
    Order ID: MH*****MDD
    Receipt Date: 21/01/13
    Order Total: $21.97
    Billed To: Visa .... 0450
    Item
    Developer
    Type
    Unit Price
    SSH-Terminal, v3.2.2 (4+)
    Write a ReviewReport a Problem
    PRAKASH KATARIYA
    App
    $0.99
    Dont Touch This, v1.2 (4+)
    Write a ReviewReport a Problem
    Se Young Kim
    App
    $0.99
    iSniper 3D Arctic Warfare, 224K Credit Pack
    Report a Problem
    TRINITI INTERACTIVE LTD
    In App Purchase
    $19.99
    Order Total:
    $21.97
       Please retain for your records
    Please See Below For Terms And Conditions Pertaining To This Order.
    Apple Inc.
    You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
    Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/uk/support/itunes/store/
    Server Admin Remote
    Harlekins
    Magic Lock Screen
    Panorama Concepts
    VNC Viewer
    RealVNC
    https://phobos.apple.com/WebObjects/MZFinance.woa/wa/accountSummary
    <Personal Information Edited By Host>

    Posting personal information ina  public forum is a very bad idea.
    We are all users like yourself, no one here can do anything about your account.
    If you have issues, report them to iTunes Customer Support... they are the only one's that can make changes to the account or reverse charges.

  • The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL

    Hi
    We are using SRM 5.0. We are facing a strange problem. We are able to see the initial screen of SRM EBP in the browser. But once the user name and password are provided the system goes for a dump with the following error:
    The following error text was processed in the system SS0 : System error
    The error occurred on the application server <Server Name> and in the work process 0 .
    The termination type was: ABORT_MESSAGE_STATE
    The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL
    <b>SM21 Log:</b>
    Short Text
         Transaction Canceled &9&9&5 ( &a &b &c &d &e &f &g &h &i )
         The transaction has been terminated.  This may be caused by a
         termination message from the application (MESSAGE Axxx) or by an error
         detected by the SAP System due to which it makes no sense to proceed
         with the transaction.  The actual reason for the termination is
         indicated by the T100 message and the parameters.
    Transaction Canceled ITS_P 001 ( )
    Message Id: ITS_P
    Message No: 001
    I just checked these threads but did not help much,
    RABAX_STATE  error after loggin into BBPSTART service in SRM 4.
    ITS_TEMPLATE_NOT_FOUND error
    Besides I tried this note: 790727 as well, still I get the same error.
    Any help would be highly appreciated.
    Thanks in advance
    Kathirvel Balakrishnan

    Hi
    <u>Please do the following steps.</u>
    <b>When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Default host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transaction server-->test service/Publish. (BBPSTART , BBPGLOBAL etc)
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (Transaction -  SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.</b>
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • I lost all Lenovo programs like idea touch 3.0 and e.t.c.How can i get them back.Please help me.

    Hello!Can you help me Please, I have my Lenovo B520 idea centre i made upgrade till windows 8 and back to windows 7 but i lost all Lenovo programs like idea touch 3.0,Lenovo SplitScreen , Lenovo VeriTouch,Lenovo Eye Distance System,Lenovo Dynamic Brightness System and more . How can i get them back. Please help me.

    Hi
    Welcome To Lenovo Community
    I presume that you have got preinstalled windows 7 System, Which you upgraded to Windows 8 now you have downgraded to windows 7. I have few questions & suggestion
    How you downgraded to windows 7 using Recovery System or using windows OEM Disk
    I am presuming that you have used the OEM disk, I would suggest you to use the OKR feature to restore to factory default by press F11 button during Post i.e.. When Lenovo Logo is displayed and follow onscreen instructions
    Have you created a set of recovery media? If yes you can use these to recovery your system
    Note: Before using above steps please ensure you have backed up your data
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español

  • Bypass check for this program only

    Hi FI Masters,
    i have a zprint prog ex : ZRFFOZA_H2H. i copied this prog and given a transaction(ZRFFOZA_H2H_FI   tcode : ZFI_H2H ) and run to see the results where it works fine.
    but....
    payment method can be linked to only one print program and in this test case payment method M is linked to ZRFFOZA_H2H, so now the problem is that the new transaction code ZFI_H2H is built on program ZRFFOZA_H2H_FI and the system refuses to run. 
    when i see the message it shows like this...
    The list of payment methods (M) may only be processed by other payment medium programs.
    now how can i bypass this check for this program only?
    can i have some info please....
    Thanks,
    pasala.

    hi FI masters,
    to be more clear to the above quetion,
    i have 2 zprog for the Payment run
    for the Payment method 'M' i have z prog ZRFFOZA_H2H which is configued
    again i have made a copy of above prog to ZRFFOZA_H2H_FI  and run the payment run for the Payemnt method 'M'.
    Now it gives me a message : Payment method(s) are not allowed for this program.
    since below copy prog not configed we get this message.
    NOW : What can i do to bypass this check for this program only
    can i have some info pls?
    thanks again,
    pasala.

  • System error in program CL_RSMD_RS_SPECIAL

    I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
    System error in program CL_RSMD_RS_SPECIAL and form
    IF_RSMD_RS~READ_META_DATA-02 (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program
    state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template,
    or during interaction in the planning modeler, and if you can reproduce
    this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for
    the trace tool environment as well as SAP Note 899572.
    and in portal, it gets to the point of variable screen and then throws a error msg.
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    MSGV1: SAPMSSY1
    MSGV3: UNCAUGHT_EXCEPTION

    I was a lil late on this time
    However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
    any ways good luck
    Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
    Hope it Helps
    Chetan
    @CP..

  • System error in program SAPLRSDRC

    Hi Gurus,
    I created a control query for precalcualting web templates using reporting agent and when i released the job it gave me this error
    <b>System error in program SAPLRSDRC and form /BIC/F100012</b>
    Message no. BRAIN299
    <b>
    Diagnosis</b>
    This internal error is a targeted termination since the program has an
    incorrect status.
    <b>
    Procedure</b>
    Analyse the situation and inform SAP.
    Does any body has any idea about this error. Please let me know any one got across this kind of problem.
    Thank you one and all
    Suneel

    There may be some error (eg syntax error) in this form routine.
    Open program saplrsdrc and search for the form routine  /BIC/F100012, or do a syntax check on SAPLRSDRC. If syntax check is ok, do see if you have this form routine, and whether it has any code that is resulting in a runtime error.
    You may also check for dumps in ST22.

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

    Hello all,
    One of the users is trying to run a report in Production using BEx analyser and gets the following error.
    BI Server error:
    Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
    I have already run the SAP Note 1237190 but there is no use as the error comes up again.
    Could any one please help to resolve this issue.
    Thanks
    Phani.

    Hi Dipika
    Thanks for the reply.
    But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
    This is not happening with all the users though.
    Its a random problem only.
    Thanks
    Phani.

Maybe you are looking for

  • Questions on async and sync's unit tests

    Hi All I write a API project and that have sync and async method.   Then I also write a unit tests for them. What I want to ask is how to write them is better ? public abstract class ApiProxyBase         protected async Task<T> GetDataAsync<T>(IRestR

  • Unable to install photoshop elements on windows 8

    When trying to instal I receive the following errors. Can anyone help? windows 8 photoshop elements 10 and premiere elements 10 the trial version 11 seems to install fine with no errors poping up but i have not tested that

  • Error whlie opening Integration Repository

    Hi All, In XI System whem iam clicking Integration repository iam getting the following error. JAR resources in JNLP file are not signed by same certificate Exceptions JNLPException[category: Launch File Error : Exception: null : LaunchDesc: <jnlp sp

  • Apex 4.2: changing link column from ROWID to ID

    Hello I have a report linked to a form. The link column is currently ROWID and I want to change it to the Primary Key of the DB table, which is called ID. I have done this before on a previous report/form where that ID was a display column and it wor

  • 12-month prepaid membership & Serial number

    I bought Illustrator CC 12-month prepaid membership and accessed https://redeem.licenses.adobe.com/getserial to get the serial number, but it failed with error message " The code you entered is invalid. Please try again." What can I Do?