HTML Tag Panel

Hi
Some Web Editors such as Esspresso have a panel that shows all html tags thats used in an opened document and when slect any
cursor moves to that tag in the code editor of the document where can i find such panel in dreamweaver ? tag inspector dont show
such functionality.
Kindest Regards

Hi Sudarshan ..
i Checked code ispector its not what im looking for actually i didnt see any use for it i feel its just a code view in a panel,
we could use the solution Jon suggested it same what im looking for is something like attached photo from espresson see
how elegant it is compared with dreamweaver ugly interface
Regards

Similar Messages

Html tags showing up in trace();

summary: 1 swf with 3 movieclips. mc1 has input text field
"name_txt", mc2 has dynamic text field "nameOutput_txt"
When I:
trace (mc1.name_txt);
I get the following in the Output panel:
"<TEXTFORMAT LEADING="2">TEST TEXT</TEXTFORMAT>
How do I turn this off? It looks like flash is trying to pull
the html formatting information from the text field. This same
information is also populating "nameOutput_txt"
any thoughts?

trace (mc1.name_txt.text); // Will show text with no html
trace (mc1.name_txt.htmlText); // Will show text with html
tags
Hope this helps

HTML textfield shows my html tags?

My html properties of my textfield are set on true and STILL he
shows all my html tags? (property is set with actionscript AND
in properties panel)
The XML with the html content looks like this:
====================================
<?xml version="1.0" encoding="utf-8" ?>
<texts>
<text><![CDATA[ Vai kaut reizi
esi]]></text>
</texts>
====================================

djeeeez louise....thank you very much Marghoob !
How logical :O irronical speaking...BEcaese it
ISNt...aaaaarrrgh, i was busy with this stupid thing all day
long...changinf xml etc...pffff

Embed HTML tag

Hi I am toatally new to Flex. and i like RIA.
I have a question.
can I embed html tag into flex controls line in panel
control?
for example I want to use <table></table> into
flex's 'panel' control.
this requirement arose beacase, I have some raw code from my
previous ajax application with simple html and javascript, and
typically I used to use them as
div-Id.innerHTML="<table><row><td>hello</td></tr><table>"
i simple want to reuse my code with flex RIA
I shall be highly oblized if anybody could help me as soon as
possible.
thanks
Ravendra

"ravendra.kumar" <[email protected]> wrote
in message
news:g6u91u$q06$[email protected]..
> Hi I am toatally new to Flex. and i like RIA.
>
> I have a question.
>
> can I embed html tag into flex controls line in panel
control?
>
> for example I want to use <table></table>
into flex's 'panel' control.
>
> this requirement arose beacase, I have some raw code
from my previous ajax
> application with simple html and javascript, and
typically I used to use
> them
> as
div-Id.innerHTML="<table><row><td>hello</td></tr><table>"
>
> i simple want to reuse my code with flex RIA
>
>
> I shall be highly oblized if anybody could help me as
soon as possible.
I think you'll find it easier to just work with the Flex
version of a Table,
which is the DataGrid.
HTH;
Amy

Help needed in adding effects of certain HTML tags in Flex spark Richtext

I want to apply the effects of the following HTML tags/ attributes, in my HTML text rendered in Flex Spark Richtext Component.
Superscript - 
Subscript - 
Blockquotes - <blockquotes>
Ordered Lists - <ol><li>
Unordered List - <ul><li>
Horizontal Rule - <hr>
Direction Attribute for - Hello
Background Color for 
I have observed that the above tags have no effect in RichText. Is this a limitation?
Any solutions, tweaks and tricks will be appreciated...
Thanks,
Mangirish

check this out . this should be able to answer you question.
http://livedocs.adobe.com/flex/3/html/help.html?content=textcontrols_04.html
Miguel

Query to extract HTML tag with data

Hi All,
I have a string.
'<HTML><HEAD>THIS IS HEAD.</HEAD><BODY>THIS IS BODY.THIS IS P1.NIMISHTHIS IS P2.</BODY></HTML>'
I want to extract a html tag including its opening & closing tab with data as
if i say P1
then the output should be
'THIS IS P1.'
for P2
then the output should be
THIS IS P2.
please help me in writing this query with regular expression
i have tried it as following but it is not giving desired result:
WITH T AS
SELECT
 '<HTML><HEAD>THIS IS HEAD.</HEAD><BODY>THIS IS BODY.THIS IS P1.NIMISHTHIS IS P2.</BODY></HTML>' STR
FROM
 DUAL
SELECT REGEXP_SUBSTR(STR, '.+P2.+') FROM T
Thanks & Regards
Nimish GargEdited by: Nimish Garg on May 7, 2012 5:49 PM

Nimish Garg wrote:
My requirement is to extract a <tag>data</tag> from a HTML/XML string
where data contains any specified value.HTML is not XML.
And that is a critical distinction to make. HTML parsing is horribly complex. XML is quite easy. For HTML you have to code your own parser in PL/SQL. XML can be parsed using the XMLTYPE class/data type in PL/SQL.
So if you need to find a single specific tag in HTML - I would not try to treat it as XML. I may not even try to use regular expressions.
I would do a basic substring search for the start of the tag. Read the data following the tag. Ensure that there are no nested or embedded tags in the data. Until the end tag is read. Because HTML is that much abused - and because that is an accepted norm as parsers used by browsers deals with that abuse without complaining.
Proper HTML is mostly a myth in my experience of "screen scraping" web servers for data extraction as they do not have web services supplying the data.

Values having html tags not getting populated while using AJAX in APEX

Hi,
I am using AJAX to populate certain values in a tabular report.
I have a java script of this form (I have taken this example from Denes's example http://apex.oracle.com/pls/otn/f?p=31517:241:1400877312570049)
<script language="JavaScript" type="text/javascript">
function f_set_multi_items_tabular(pValue, pRow){
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Set_Multi_Items_Tabular',0);
if(pValue){
get.add('TEMPORARY_APPLICATION_ITEM',pValue)
get.add('T_ROWNUM',pRow)
}else{
get.add('TEMPORARY_APPLICATION_ITEM','null')
gReturn = get.get('XML');
if(gReturn){
var l_Count = gReturn.getElementsByTagName("item").length;
for(var i = 0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("item");
var l_ID = l_Opt_Xml.getAttribute('id');
var l_El = html_GetElement(l_ID);
if(l_Opt_Xml.firstChild){
var l_Value = l_Opt_Xml.firstChild.nodeValue;
}else{
var l_Value = '';
if(l_El){
if(l_El.tagName == 'INPUT'){
l_El.value = l_Value;
}else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
l_El.parentNode.innerHTML = l_Value;
l_El.parentNode.id = l_ID;
}else{
l_El.innerHTML = l_Value;
get = null;
</script>
And I have the application process as follows
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="f05_000' || :T_ROWNUM || '">' || :TEMPORARY_APPLICATION_ITEM || '</item>');
HTP.prn ('</body>');
END;
If I have :TEMPORARY_APPLICATION_ITEM as 'Vikas' it gets displayed properly but if I have 'Vikas' it shows null. if it has any HTML tags function l_Opt_Xml.firstChild.nodeValue is not working properly .Please tell me what modiifcation can I use in function l_Opt_Xml.firstChild.nodeValue to get Values with HTML tags also to get displayed.
Thanks,
Vikas

Vikas,
Try escaping special characters: htf.escape_sc(:TEMPORARY_APPLICATION_ITEM)Regards,
Dan

Pdf and html tags

I am creating a report in APEX. I am using the HTML TAG in my headings on the report. The headings on the report look great. When I do the PDF the headings do not look great. The PDF does not seem to like the html tag. Any idea's?

Hi Earl,
I actually have strong, bold, italic, html, new paragraph tags in the content of the text area.
When the pdf is displayed, it shows the tags as it is. I want the data to be formatted and displayed.
Thanks
Meenu

HTML Tags not moved in PDF

Hello,
I would like to print a report as a PDF and use the BI Publisher.
This functions so far also quite well, only I have the problem
I pass a HTML formatted text from a field CLob
and with the PDF output the HTML tags are not moved.
In the PDF document the HTML tags stands instead of a formatted heading,
e.g.
<*h1> This is the heading <*/h1> (without stars)
What I must set / make with it I also a formatted one
Heading agrees?
Somebody an idea?
Edited by: user10460383 on 14.09.2009 06:16
Edited by: user10460383 on 14.09.2009 06:17

True - a PDF isn't going to support HTML encoding. HTML will just be seen as more text, and displayed that way.
You can strip out HTML tags fairly easily with a regular expression in your query SQL - this simply looks for text between < and > characters, and removes it. That should work for basic HTML formatting tags, but it isn't 100% (it won't handle <script> blocks correctly, for instance).
select regexp_replace(myHTML, '<[^>]*>', '') as myText
from myTable... Implementing a method to convert the HTML formatting into RTF formatting is also possible, but not a trivial task - you'd effectively have to replace each HTML tag with an RTF equivalent -- eg, replace <H1> with the RTF code to make a larger font, replace </H1> with RTF code to return the font to normal... etc...

Reports does not show data which contains HTML tags

Dear Gurus
Im trying to resolve this problem but im really stuck in it. I have the requirment to customize PO reports in R12 and at the end of every report we have to show its Terms and Conditions.I have the following query wich brings me the data i need.
SELECT
otu.document_number po_segment1,
otu.document_id,
otta.template_id,
otta.template_name,
otta.description,
otta.intent,
otta.status_code,
otta.start_date,
otta.end_date,
otta.instruction_text,
otu.document_type,
otu.document_number po_segment1,
otu.document_id po_header_id,
osb.HEADING titulo_seccion,
oav.display_name,
oav.article_text article_text
FROM
apps.okc_terms_templates_all otta,
apps.okc_template_usages otu,
apps.okc_k_articles_b okab,
apps.okc_sections_b osb,
apps.okc_articles_all oaa,
apps.okc_article_versions oav
WHERE otta.template_id = otu.template_id
AND otu.document_id = okab.document_id
AND osb.scn_id(+) = okab.scn_id
AND okab.article_version_id = oav.article_version_id
AND oaa.article_id = oav.article_id
AND otu.document_number='21000000111' -- Purchase Document
AND otu.DOCUMENT_TYPE NOT IN ('RFQ_RESPONSE', 'RFQ','RFI_RESPONSE','RFI','AUCTION_RESPONSE','AUCTION')
The problem is the field okc_article_versions.article_text storage data with HTML tags as an example : ''COMPANY will make it’s best effort to provide an accurate forecast to CONTRACTOR, at the end of every quarter, however, a forecast in any form, shall not represent a firm commitment by COMPANY.,"
So when i tried to show the information my .rtf template nothing comes out. Does anybody knows whats happenig and how to resolve it??
Please, resolve this issue is more than urgent an i guess somebody have the answe Thanks a lot
Mily

Hi ,
Currently image url have value http://serverip:port/reports/rwservlet
I don't know is this correct? Suggest What value it should have?
Thanks
Vinod

Sending an email with html tags in it using apex_mail.send

Hello,
I am using APEX_MAIL.SEND to send emails from my apex applications.
now I need the email body to have html features: bold, underline, colors etc.
If I use regular html tags, they show up in the email.
How can this be done?
Thanks
Rani

Hi, try
p_body_html
and it should display just fine :)

How to use Microsoft Word's Find and Replace with HTML tags?

Hello to all!
I'm trying to figure out how to use the find and replace function in Word to replace html tags. I'd like to be able to change something like this:
random text
To something like this:
random text
I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly.
Anyone able to lend a hand?

Here is my latest regular expression with Perl. I think it matches the spirit of the request in the original post.
Note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html.
perl -0660pe 's^<[sS][pP][aA][nN]\s+class="B01-K-ITAL"\s*>(.*?)</[sS][pP][aA][nN]>^$1^gs' i.html >|o.html
input text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>
output text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>

How can I eliminate HTML tags from Oracle Text Snippet?

I perform a search on many tables and on many columns of those tables.
Some of those columns are VARCHAR2 and some CLOB.
Also, some of the searchable data are HTML and some are plain text.
My problem is that ctx_doc.snippet fetches the HTML tags.
For example I get this, as a snippet result in one of my searches: Qual Germany n1 Test Qual Germany n1
I want the result to be fetched without the HTML tags.
In my index configuration I have used NULL FILTER and HTML_SECTION_GROUP.With that configuration I managed to eliminate the HTML tags but not in all cases!
For example:
I search table CONTENTS columns TITLE(VARCHAR2) and MAIN_TEXT(CLOB)
I created the following procedure that concatenates the two columns:
CREATE OR REPLACE PROCEDURE CONTENTS_PROC( p_id in rowid, p_lob IN OUT clob)
IS
BEGIN
FOR c1 IN (SELECT main_text||' '||title data FROM contents WHERE ROWID = p_id)
LOOP
dbms_lob.copy( p_lob, c1.data,
dbms_lob.getlength( c1.data ));
END LOOP;
END;
I created a user Datastore:
BEGIN
ctx_ddl.create_preference( 'content_trans_datastore', 'user_datastore' );
ctx_ddl.set_attribute( 'content_trans_datastore', 'procedure', 'CONTENTS_PROC' );
END;
and finally I create the index:
CREATE INDEX content_trans_ot_idx ON contents(ORACLE_TEXT_COLUMN)
INDEXTYPE IS ctxsys.CONTEXT PARAMETERS ('datastore content_trans_datastore SYNC(ON COMMIT) STORAGE INDEX_STORAGE filter ctxsys.null_filter section group ctxsys.html_section_group');
When I perform the search on those data: Test Doc-Test the snippet I get is: Test Doc-Test.
That's fine, the html tags are removed!
In another case I search table NCP columns NAME(VARCHAR2) and BODY(VARCHAR2)
I created the following procedure that concatenates the two columns:
CREATE OR REPLACE PROCEDURE NCP_PROC( p_id in rowid, p_lob IN OUT clob)
IS
BEGIN
FOR c1 IN (SELECT name||' '||body data FROM ncp WHERE ROWID = p_id)
LOOP
dbms_lob.copy( p_lob, c1.data,
dbms_lob.getlength( c1.data ));
END LOOP;
END;
I created a user Datastore:
BEGIN
ctx_ddl.create_preference( 'ncp_trans_datastore', 'user_datastore' );
ctx_ddl.set_attribute( 'ncp_trans_datastore', 'procedure', 'NCP_PROC' );
END;
and finally I create the index:
CREATE INDEX ncp_trans_ot_idx ON ncp(ORACLE_TEXT_COLUMN)
INDEXTYPE IS ctxsys.CONTEXT PARAMETERS('datastore ncp_trans_datastore SYNC(ON COMMIT) STORAGE INDEX_STORAGE filter ctxsys.null_filter section group ctxsys.html_section_group');
When I perform the search on those data: test http://deleteme.com the snippet I get is: test http://deleteme.com!!!!!!!!!!
How is this possible? Why in the first case the HTML tags are eliminated and in the second case they are not?
Thanks,
Margarita
Edited by: user13312701 on 07-Sep-2010 08:51

Doing various tests I found out that the problem is when I need to search in multiple columns of a table.
That is when I create a user_datastore that uses a procedure that concatenates the columns.
And especially when the data with the html tags is in a VARCHAR2 column.
e.g
--create the table*
CREATE TABLE CONTENT_TRANS (content_trans_id NUMBER,
main_text CLOB,
title vARCHAR2(2000),
oracle_text_column VARCHAR2(1));
alter table "CONTENT_TRANS" add constraint CONTENT_PK primary key("CONTENT_TRANS_ID") ;
--Insert dummy data*
Insert into CONTENT_TRANS
(CONTENT_TRANS_ID,MAIN_TEXT,TITLE)
values
(1,'lorem','lorem qualification 2.1 ');
Insert into CONTENT_TRANS
(CONTENT_TRANS_ID,MAIN_TEXT,TITLE)
values
(2,'lorem','lorem qualification 2.1 ');
--CREATE THE procedure that concatenates main_text(CLOB) and title(VARCHAR2)*
CREATE OR REPLACE PROCEDURE CONTENT_TRANS_PROC( p_id in rowid, p_lob IN OUT clob)
IS
BEGIN
FOR c1 IN (SELECT main_text||' '||title data FROM content_trans WHERE ROWID = p_id)
LOOP
dbms_lob.copy( p_lob, c1.data,
dbms_lob.getlength( c1.data ));
END LOOP;
END;
--Create the user datastore*
BEGIN
ctx_ddl.create_preference( 'content_trans_datastore', 'user_datastore' );
ctx_ddl.set_attribute( 'content_trans_datastore', 'procedure', 'CONTENT_TRANS_PROC' );
END;
--Create the index*
CREATE INDEX content_trans_ot_idx ON content_trans(ORACLE_TEXT_COLUMN)
INDEXTYPE IS ctxsys.CONTEXT PARAMETERS ('datastore content_trans_datastore SYNC(ON COMMIT) filter ctxsys.null_filter section group ctxsys.html_section_group');
exec ctx_doc.set_key_type('PRIMARY_KEY');
--Perform the query
SELECT SCORE(1),ct.content_trans_id, ctx_doc.snippet('content_trans_ot_idx', ct.content_trans_id, 'lorem') as snippet
from content_trans ct
where contains(ct.ORACLE_TEXT_COLUMN, 'lorem', 1) > 1;
Results WITH NOT WANTED HTML TAGS:
6 1 lorem lorem qualification 2.1
6 2 lorem lorem qualification 2.1
Edited by: user13312701 on 13-Oct-2010 01:18

How to use the HTML tags in the reports.

hi.
can any one tell me how to use the HTML tags in the reports.
i m using the forms 10 g rel 2 and reports 10 g rel 2 and application server 10g rel 2.

Set the Contains HTML Tags property of an object to Yes, then the tags in the object's text (if any) will be used to format the object.

HTML Tags in Text View

Is it possible to use HTML tags to format a string displayed
within a text view. If so how?

Jonathan,
No, this is impossible for TextView.
In WD ABAP it is possible using FormattedTextView UI control.
See my post that describes workaround for WD Java: /people/valery.silaev/blog/2005/11/23/display-formatted-text-using-webdynpro-for-java
VS

HTML Tag Panel

Similar Messages

Maybe you are looking for