Html tags - how to add a blank line
Hi there,
can anyone tell me how to add a blank line into a page using one of the html tags ?
thanks,
Malcolm.
You can use the <br> tag for a line break. Also for space.
Regards,
Arun
Similar Messages
-
How to add a blank line in configurat​ion file
Hi,
I would like to add an empty / blank line in my configuration file. (.ini file) as below:
[H1]
key1=1
[H2]
key2=2
I don't have any idea on how to add the empty/blank line.
Could anyone help me on this?In case you do not have such luxury, like me...
This example VI show an alternative way of inserting empty line/ space between sections of a configuration file...
PS1: Note that Additional Empty Element is intentionally added to create/ add empty line/ space between sections...
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFFCT_CFIO_example add empty line between sections.vi 64 KB -
How to add a blank line/return!
So simple, it would seem, and yet I can't find a way to do this in adobe acrobat!
All I want to do is stick a blank line in the pdf, a return. At the moment the text reads like this?
"jskdbvjkls\bvj\s
skjfdbvjkashbvgkj
askjfnvlkasjnvskjdn"
akfgnvlkasfdnvgkangfdhnsdfgnsfgmnsfmjndfhmjdgfhmjgfhm
I would like it to read like this:
"jskdbvjkls\bvj\s
skjfdbvjkashbvgkj
askjfnvlkasjnvskjdn"
akfgnvlkasfdnvgkangfhmxfhgmnxfhmxgfhmgfxhmghmghm
The narrow text is a poem (in the middle of some prose) and I'd like there to be a space between the end of the poem and the start of the explanation. However, they each seem to be inside different boxes(?) and if I press return to create a blank line, the last line of the poem overlaps with the first line of the prose. I've struggled with this for ages, but can't find a way to do it. Can somebody set me free from this incredibly annoying frustration?This type of edit should not be performed in the PDF. You need to edit the
original file and then create a new PDF.
If you can't do that then either export it or try to move all the text
"boxes" you see. There's no other way of doing it. -
How to add a new line in SMS(Line Break).
Hi All,
I need to send SMS from PL\SQL Procedure
The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
It shows all content in one line.
I need to break them in several lines.
Give me a direction how to add a new line in SMS.
Regards,
Raj.Hi,
Sure, Here it is
CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
IS
sender VARCHAR2(1000);
recipient VARCHAR2(1000);
message VARCHAR2(4000);
sub VARCHAR2(1000) := 'HELLO';
dt1 varchar2(1000) := to_char(sysdate,'DD-MON-YY');
mailhost VARCHAR2(30) := '10.7.7.xxx';
mail_conn UTL_SMTP.CONNECTION;
v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
CURSOR cur_Rejection_Records IS
SELECT DISTINCT
rt.VENDOR_SITE_ID ,
pvs.email_address VENDOR_MAIL_ID ,
pvs.PHONE vendor_contact_no ,
hre.EMAIL_ADDRESS Employee_mail_id ,
hre.FULL_NAME
FROM apps.rcv_transactions rt,
apps.po_vendors pv,
apps.po_vendor_sites_all pvs,
apps.mtl_transaction_reasons mtr,
apps.fnd_user fu,
apps.hr_employees hre
WHERE transaction_type = 'RETURN TO VENDOR'
--AND TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
AND rt.vendor_id = pv.vendor_id
AND rt.vendor_site_id = pvs.vendor_site_id
AND rt.REASON_ID = mtr.REASON_ID(+)
AND fu.user_id = rt.last_updated_by
AND hre.EMPLOYEE_ID = fu.EMPLOYEE_ID
AND TRANSACTION_ID IN (
11902189,
11902253,
11902148)
BEGIN
FOR rec_Rejection_Records IN cur_Rejection_Records
LOOP
Begin
sender := '<[email protected]>';
recipient := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
mail_conn := utl_smtp.open_connection(mailhost, 8025);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
utl_smtp.DATA( mail_conn,
'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
'From: ' || sender || utl_tcp.crlf ||
'Subject: '|| sub || utl_tcp.crlf ||
'To: ' || recipient || utl_tcp.crlf ||
utl_tcp.crlf ||
'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
'Please.'|| utl_tcp.crlf
DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
WHEN OTHERS THEN
dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
END;
END LOOP;
END AUTO_SMS_RTV_REPORT;
/ -
Reporting Toolkit: How to insert a blank line into an MS Word Report?
Hello,
I have created an MS Word report, but I haven't been able to find out how to "write" a blank line to the report. I've tried every combination of \n, \\n, "\n", '\n', \\n etc., but I haven't had any good luck.
Thanks,
ChrisHello,
If you're using "append report".vi it's has one input for "new line".
Message Edited by Jorge Amaral on 05-02-2008 03:28 PM
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
append.PNG 3 KB -
How to add a header line to excel sheet?
Hi Guru's
I have download the scheduling agreement report in a excel sheet, I want to know how to add the header line to that excel sheet.Hi
See this sample code:
Tables : zacg_cca,zacg_exsh.
data: P_file like RLGRAP-FILENAME.
Data: Begin of it_header occurs 0,
Header(15) ,
end of it_header.
Data : begin of it_final occurs 0,
ccode type zacg_cca-ccode,
mat_cd type zacg_cca-mat_cd,
ingr_desc type zacg_cca-ingr_desc,
conc type zacg_cca-conc,
quantity type zacg_cca-quantity,
percqty type zacg_cca-percqty,
flag ,
APP_DATE type zacg_cca-app_date,
rsamnos type zacg_cca-rsamnos,
end of it_final.
SELECTION-SCREEN : BEGIN OF BLOCK blk WITH FRAME TITLE text-000.
select-options : s_Date for zacg_cca-app_date.
SELECTION-SCREEN : END OF BLOCK blk.
it_header-Header = 'Samp_code'.
Append it_header.
it_header-Header = 'Mat_code'.
Append it_header.
it_header-Header = 'Ingr_Desc'.
Append it_header.
it_header-Header = 'Conc'.
Append it_header.
it_header-Header = 'Quan'.
Append it_header.
it_header-Header = 'Perc'.
Append it_header.
it_header-Header = 'Flag'.
Append it_header.
it_header-Header = 'Date'.
Append it_header.
it_header-Header = 'Rsamnos'.
Append it_header.
it_header-Header = 'Mat_code'.
Append it_header.
select ccode
mat_cd
ingr_desc
conc
quantity
percqty
app_date
rsamnos
from zacg_cca into corresponding
fields of table
it_final where zacg_cca~app_date in s_date.
loop at it_final.
it_final-flag = 'T'.
modify it_final.
it_final-quantity = it_final-quantity * 2 .
Modify it_final.
endloop.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
FILE_NAME = 'E:\IT\P_FILE'
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
DATA_TAB = it_final[]
FIELDNAMES = it_header[]
EXCEPTIONS
FILE_NOT_EXIST = 1
FILENAME_EXPECTED = 2
COMMUNICATION_ERROR = 3
OLE_OBJECT_METHOD_ERROR = 4
OLE_OBJECT_PROPERTY_ERROR = 5
INVALID_PIVOT_FIELDS = 6
DOWNLOAD_PROBLEM = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
regards
Satish -
How to add a horizontal line in RoboHelp HTML 7
HI - I am working with RoboHelp 7 HTML. I want to add a
horizontal line to my topic. I am using RoboHelp as my editor. Work
mostly in WYSWYG / Design mode and don't do much hand coding as a
rule, but sometimes I tweak the code. Since I couldn't find a
WYSIWYG way to add a horizontal line, so thought I would try the
<hr/> tag.
Sadly - that just shows up on the Design view page as a big,
red highlight of the <hr/> tag.
Suggestions?
Thanks, LeisaLeisa
There's a menu option too. Don't have RH open but it's
something like Insert | HTML | Line.
The line will be 50% page width. Look in Snippets on my site.
Rick Stone posted recently how to make that 100% by default. -
How to add extra blank space in xml
I open the xml file in notepad I get this
<XXON_EXT_BANK_ACCOUNT_NAME>創名聯合會計師事務所 </XXON_EXT_BANK_ACCOUNT_NAME>
But when I open the xml file in html format the blank space is gone.
How can I add extra blank space in xml?Hi
Why do you need the extra space for?
This difference in display that you see between your browser and notepad/notepad++
will not affect your generated report.
Bogdan -
How do you remove blank lines from an assignment block?.
I have used the UI enhancement tool to add fields to an assignment block, but I've ended up with a blank line between the fields. How can I remove this?. There's an option to add new lines and fields but not remove them.
Anyone.
JasonMany thanks, that worked fine. I did not think of doing that, but I can see why there would not be a remove line option.
Regards
Jas -
How to add a new line item to a Purchase Requisition number
Hello All,
Can anyone please provide me with some FM or BAPI to add a new line item to an existing Purchase Requisition number.
Can it be done using BAPI_REQUISITION_CHANGE; if yes, then how do I pass the parameters into the BAPI tables..?
Useful pointers would be appreciated...!!
Thanks & Regards,
Tarun Gambhir@Gautham,
Thanks for the quick reply.
I want to update the table EBAN, so should I use the parameter table XEBAN to put in the new line item and then execute..
Also to fill up this table I need to pass certain value, so can I use BAPI_REQUISITON_GETDETAIL and pass the same details as found from the same BAPI and create a new line item...
Regards,
Tarun Gambhir -
How to add a new line in pe51?
Hi Team,
I want to add anew field in pe51 form editor.
for that i want to add anew line in pe51 form
i went to pe51 tcode and selected background raidobutton.
but from ther i dont know how to add a line at the required position.
So please reply me on this as soon as possible.
Thanks & Regards,
Kranti.Hi Kranti,
The reason, why you are not able to insert a new line in background could be that the maximum line size defined in attributes is already utilized. Thats why F7 doesn't work.
1- From main screen of PE51, select your pay slip, click on attributes and than click on change button.
2- Increase value in lines field and save changes.
3- Go to background and try to insert new line with F7 keyboard key.
I hope this is what you are looking for.
Regards,
Waqas Rashid -
How to add a blank row in a report structure ?
Hi,
I have a report which uses a structure in both the rows and the columns. It also using cell definitions to define some cells in the report.
What I want to do is to format the report a bit more and insert a blank line at various points in the row structure.
Can this be done and if so how?Are you creating report on InfoCUbe or ODS?
Are you aware of any characteristics for which value will never be ZERO in the Dataprovider?
If yes, then remove the formula and create the selection with description .(dot) and restrict that characteristics by #. That would pullout space for all the KFs.
- Danny -
How to add first blank entry in messageChoice
I have a messageChoice that's populated entirely from the associated model (which happens to be a backing view/sql table). The only items that show in the list are populated records from my view/table. This is sufficient for create / edit forms, where I must have a value for the field that this messageChoice binds to. But it is problematic on the UIX Search Form component, because I need a blank entry in my messageChoice, so if the user creates new search criteria, it doesn't automatically take the first value in the list as part of the filter.
How can I add a blank first option in my messageChoice when the messageChoice is bound to a model backed by a view?
Thanks.
Bradhttp://www.oracle.com/technology/products/jdev/tips/mills/null_list_entry.html
-
How to add the new line in reciever FCC
Hi All,
I have my reciever FCC with me, but I just need to add one more additional line or you can say seprate the first line.
So how to add extra or new line in the current structure?
Please let me know if there is any parameter for this.
Thanks in advance.
Regards,
Rahul KulkarniHi Rahul,
You can achieve this by endseperatot "nl"
If record set structure is * means fine, you just add second line field names by using end separator "nl".
If you added first line names in recordsetstructure add second line names as well and remaining same use end separator.
Example (below file is having two lines):
<NameA>
name,address,id
empid,sal,region
<NameA/>
your FCC will be (according to your requirement the below 3 fileds will be use full).
Recordsetstructure - *
NameA.fieldvalues - name,address,id
NameA.endseperator - nl
NameA.fieldvalues - empid,sal,region
Thanks & Regards,
A.Neelima. -
How to remove the blank lines at the end of the JTextArea .
Hi,
I need to remove the blank lines in the JTextArea at the end. Suppose i am giving 'A' in the first line and press the enter key two times, after i am giving the 'B' in the third line and press enter key for two times. I need to remove, the last two lines of JTextAreae, . How i can remove these lines?String#trim() removes all whitespace from both ends of the String.
The requirement was to remove line breaks from the end of the String only.
String#replaceAll with a suitable regex would do the trick. Untested regex for this:text.replaceAll("[\\n\\r]+$", "")db
Maybe you are looking for
-
I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes
-
HELP - how to get photos from iphone after Telstra wiped it
Hi I am asking this question on behalf of my sister. She had her second child last week and her husband took heaps of photos on his iphone from the birth and the first couple days in hospital, I'm not sure what model his iphone is but he only got it
-
Hi i created a report in webi and then imported it to rich client and created a webservice based on it when i change the report in webi and save i get the message "this documents contains content published as a web service . do you want to save it" d
-
IWeb says I'm not logged into MobileMe when I am...?
I'm trying to publish my site from iWeb but the Site Publishing Setting's page keeps saying I'm not logged into Mobileme - and I am. I've restarted, checked for updates, downloaded the updated iWeb. Thanks for any insight!
-
Hi, This is my first post, so please be kind if the post is not placed in the right location. My home gateway / vivid wireless "4G" account is a few years old, but it seems that the speed is getting slow more often, which is quite frustrating. Loo