HTML version 2.0 on 9204 ?

Hello,
Is it posssible to install the new 2.0 HTML DB on a 9204 database ?
Thank you.

Yes, as per the Installation Guide, Oracle Database 9iR2 (9.2.0.3) is the minimum version required in order to install HTML DB 2.0.
Thanks,
- Scott -

Similar Messages

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

RoboHelp HTML Version 10 - Navigation panel not displaying in published project

We are generating a WebHelp project in RoboHelp HTML Version 10 and the navigation panel (TOC, Search, etc.) is no longer visible in the index file (viewed locally) and it's only visible by clicking "Show" when viewed in a web server. This issue is occurring with Internet Explorer 11 and Google Chrome Version 39.0.2171.99 m. I also tried to view the index files of previously generated projects and am experiencing the same issue (this did not occur before). Is this a known issue? It appears that there a few other discussions posted recently experiencing similar issues. Any help would be greatly appreciated.
Thanks,
Nikki

Hi there
Sorry, but I'm a bit confused. What you are describing sounds like perfectly normal behavior.
Can you share a link where this is happening? Not so we can click it, but so we can see what the link looks like.
If you want a topic to open with the surrounding navigation (TOC, Index, Search, Glossary) you need to click the Show link, then look at what's in the Address bar. Copy that link and you should have what you need.
Cheers... Rick

Topic headings not showing in Firefox, with RoboHelp HTML version 8 WebHelp

1. I have just upgraded a customer's Help project to RH8, with a WebHelp layout.
The finished WebHelp Guide works fine in Internet Explorer 8.
But Firefox 3.0.1.5 (latest update) does not show topic headings (style Heading 1) where they are automatically linked to the Topic Properties > Topic Title.; i.e. the topic heading is a Field {Title}, using rh-variable_start name="title" etc. Firefox only shows the topic heading if the heading exists as text in the WYSIWYG field.
I checked a backup copy of the compiled WebHelp that I had generated using RoboHelp HTML version 7, and this works OK - all topic headings that are fields display OK in Firefox.
2. Also, some images (.gif format) do not display in Firefox that is generated by RH8.
Any ideas, anyone?
Philip

Hi,
Note: All I post here are my findings. I didn't test all DHTML effects and I'm not a javascript guru, so I may be wrong.
As far as I can find, this behaviour is defenitly a bug, although it's not related to headings, CBT's or images. This is what I found:
Whenever you have multiple DHTML-effects that kick in on load, Firefox only displays the one that is defined first in the topic. In the bottom of the topic, you'll find a script like this:
<script type="text/javascript" language="JavaScript1.2">//<![CDATA[
    if( typeof( InitEffects ) != 'function' ) InitEffects = new Function();
    InitEffects('img1','x-on-pageload: fadein();');
    InitEffects('h11','x-on-pageload: fadein();');
    InitEffects('h111','');
//]]></script>
In this case, the image with id img1 is loaded first and displayed correct. All subsequent effects (heading with id h11) is not displayed. Putting the heading in front of the image will show the image, while the image is not displayed.
I suspect that the effects are not correctly parsed into
if ((gbBsNS6)&&(srcObj.addEventListener))
        srcObj.addEventListener( noOn.toLowerCase(), new Function("event", newHandler ),false);
on line 2994 and 2995. Changing or deleting line 2995 effectively removes kills on load effects (ie not showing anything with an on load effect) as expected.
If you also use DHTML effects and find the same behaviour as Philip, please post a bug report.
Greet,
Willam

Problem with HTML Version.

hi all,
i am getting an error namely ITS_CANNOT_LOAD_INCLUDE when i am trying to call the SAP Transaction iView as an HTML Version iView.
can anyone plz help me on this.

From what I see, look up one line:
<snip>
5. For Oracle Application Server 10g, execute the following commands:
* For UNIX and Linux based systems:
ORACLE_BASE/ORACLE_HOME/dcm/bin/dcmctl updateConfig -ct ohs
</snip>
You don't use Oracle Application Server, so this step doesn't apply to you. Just skip it :)
-Josh Bensin

My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?, My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?

My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?, My gmail doesnt load on my macbook pro anymore, only able to fully load with the html version. Anyone share the same problem?
It loads till the almost the end of the bar and just stops there.

I'm having the same problem. It just freezes and wont load the rest of the way.

Print feature on dashboad - HTML version does not save charts

The print option at the bottom of the dashboard allows the reports to be saved either as a PDF or HTML file. The PDF file with the report does not look as good as the reports on the dashboard. Though the HTML version looks good, when I save the file and then reopen it, all I can see is the tables. The charts do not show up.
I am saving the file with extension .mht and used various encoding such as Unicode (UTF8), US-ASCII, and Western European (Windows) etc.
Is there anything that I need to set somewhere?
Thanks.

I saved the report as mhtml as shown in the below link,
http://img413.imageshack.us/img413/108/img1xp.png
the chart were coming in the saved page
http://img696.imageshack.us/img696/341/img2wq.png
Thanks,
Vino

Error - html version of the indexed document

Hi All,
EP Version -2004s
I have created a web repository and configured a TREX search for that .
Search is working fine except I cannot see the html version of the searched document when I click on the 'html version' link.
When I click on 'html version' link I get an error message saying 'index service not found'.
Any idea ?
Thanks & Regards,
Amit Kade

Hi Experts,
Can anybody please answer this query .. its very urgent.
Thanks & Regards,
Amit Kade

When I sign in to Gmail in FF I get this mess -Error undefined If this problem persists, try reloading the page, or using the basic HTML version. Learn More.

When I sign in to Gmail in FireFox I get this mess -Error undefined If this problem persists, try reloading the page, or using the basic HTML version. Learn More.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Where can I download the HTML version of the 11g documentation?

Could someone tell me where I can download the HTML version of the 11g documentation? The landing page for 11g Tuxedo docs states "View PDF or download a ZIP file containing documentation in PDF and HTML formats from the Download Documentation page", but the only two options available are to download the pdf files and the javadocs.
In this part of the world (Africa) we tend to suffer from limited bandwidth, and it is far more efficient to have the docs loaded on my laptop!
Thanks & regards,
Malcolm.

Hi Malcom,
I've asked our tech writer to look into this and respond here.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Alternative Content - html version of my flash template

Can someone please direct me to a good tutorial or explain the steps for creating a Flash website with an alternative html version. Is it as simple as creating two sites with a link to the html version or is there something special I can do to avoid duplicate content as far as SEO? I'm working with a purchased Flash template and would like to know the simplest way to do this. Thanking you in advance.

Hm, I assume you mean Camtasia Studio 8?
Check the chart on the page you linked. You'll see that the version you have installed is in fact the latest version for Chrome. They haven't updated it beyond that. Each browser engine has its own latest version of flash. IE and Mozilla are 11.4.402.287.
Aside that, there's no reason Camtasia should be requiring you to have that version of flash. Make sure when you're publishing your content that you don't check off any options to "require the user to have the latest version of Flash". You should also (if possible in your project) try to target MP4/HTML5. Check any HTML being generated with it (hopefully using SWFObject) and check for the version checking code. There is absolutely nothing Camtasia needs to require the latest version to do. I've been using Camtasia (TechSmith codec mostly) for screen recording since version 2.

The declaration for the entity "HTML.Version" must end with ' '.

Hi experts.
I have an synchronous escenario Proxy - SOAP (SAP ERP - SalesForce) Is a very simple escenario:
1. ERP sends user and password to SF and SF respond with a token.
2. PI sends to SF a Request message with some information, SF get the message without problems.
3. When SF responds to PI, the following error appears on the SXI_MONITOR:
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_SF_General_Response_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>The declaration for the entity "HTML.Version" must</SAP:P3>
<SAP:P4>end with '>'.</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SF_General_Response_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The declaration for the entity "HTML.Version" must end with '>'.</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
The response structure from login and the point 3 are the same.
I tested in the SOAP UI and responds fine, without error:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://soap.sforce.com/schemas/class/AXT_SF_SAP_ws" xmlns:objResponse="http://soap.sforce.com/schemas/class/Objetos_ws">
   <soapenv:Body>
      <fnActualizaCostoActividadResponse>
         <result>
            <objResponse:bResponse>true</objResponse:bResponse>
            <objResponse:sResponse>Éxito en la Actualización del Costo de la Actividad, para el Caso: 001 .</objResponse:sResponse>
         </result>
      </fnActualizaCostoActividadResponse>
   </soapenv:Body>
</soapenv:Envelope>
Any idea to whats going on with this? I appreciate so much your help.
Cristina.

This has been fixed. I updated to the latest version of Java (Version 6 Update 17 (build 1.6.0_17-b04)) & cleared my browser history (temporary files, history, cookies, saved passwords and web form information). I did not have to reboot. Apparently, Java version 6 update 15 had some sort of conflict with P6 Web.

Desktop version launches HTML version

Hi
I´m trying to setup the NBWC client Desktop version. I have installed NBWC 4.0 PL12 and in the logon details i enter:
http://server.dom.com:8000/sap/bc/nwbc/nwbc_launch
I get the logon screen, but the system uses the HTML version of NWBC and launches in a separate Desktop-window.
What is wrong? Us the logon details wrong or what can i do?

Hi Jakob,
Delete the NWBC_launch in your URL and it should be fine, so the link will be
http://server.dom.com:8000/sap/bc/nwbc/
instead

Where are all the illustrations in this EPUB ebook? (HTML version has them)

I hope someone can help me with this: Using my iPad (and iBooks), I downloaded a fabulous free EPUB-version of an ebook from Gutenberg.org, "Manners, Customs, and Dress During the Middle Ages and During the Renaissance Period" (etext # 10940). Except for the first few illustrations, which do display, the other hundreds and hundreds of terrific Renaissance-era woodcuts do NOT show up in the EPUB version. But when I used my iMac to click on the HTML version at the Gutenberg.org site, all the marvelous illustrations ARE there. Is this problem unique to me? Or is it an EPUB vs. HTML problem? Or something else?

I downloaded and unzipped the 32 MB file: it makes a folder containing a 1 MB htm file, and a sub-folder filled with hundreds of images in the png format.
Not sure if you are referring to a download of a compressed HTML file or an ePUB file here. Basically, an ePUB file is an HTML/XHTML compressed file. Haven't actually opened the latter to check on hit differs from the former.
Is there any way to convert this to one EPUB ebook?
As you indicated Calibre is one free option. My problem with Calibre is getting the format to come out as I would like it to. There are also potential problems depending on the type of encoding use. Sigil is a second free option. However, this app was completely re-done recently, now has many new things added to the graphic interface, and I have yet to read the manual to see how these changes affect the working of the application. Basically this an editor application that allows you to load an HTML/XHTML/ePUB file and edit it to include chapter breaks, insertion of images, deciding what to include in the TOC, metadata editing. I have used older versions to remove the Project Gutenberg errata and license and am anxious to see what the latest update can do. It somewhat slow but being both an editor and ePUB generator, seems to be of more use then eCub which is basically a free ePUB builder. From here you would probably have to movie into the realm of commercial applications. Adobe InDesign is probably the most professional application currently available but I am having problems with the learning curve and will probably have to review the ePUB process to locate specific areas which are currently giving me headaches when export books consisting of more than one InDesign document (usually representing the individual chapters) within the book.
Is there any way to convert this to one EPUB ebook?
Not sure what you are asking here. Before going to the hospital, the only method I tested was the reading of the HTML file online using the Safari app. Unfortunately, that means you have to be connected to the internet any time you want to do your reading and most users probably want the file physically stored on their iPad. Also not sure what you mean by "one ePUB book." Conversion methods were covered in paragraph above.
Is there any way to convert this to one EPUB ebook?
Thank you. It has been 40 years since I was last in the hospital for a broken leg (motorcycle accident), so this is something new for me. Was amazed that the procedure for removing the tumor robotically only required a 24-hour stay in the hospital.
Perhaps they are going through and cleaning up and reconverting some of their older files?
I assumed there was some sort revision process in place as I noted more than one version of a particular file available -- sometimes with Gutenberg dates years apart. Based on this, it is conceivable that they are revising an imaged update which may appear as a separate HTML page listing. (FYI, also noted that only chapters 1 and 12 showed up in the default TOC, so yes, there appear to be a number of things requiring revision.
Stanza didn't help here, so I thought I might see if I could get Calibre to open the whole huge html+image folder, and then export as EPUB. However, even with the latest version of Calibre, it crashes immediately every time I open it... Any suggestions?
Are you saying you tried to import the unzipped file+image folder into Calibre? If so, i believe that was your mistake. If I remember correctly Calibre only accepts the files in their zipped form. Try re-zipping the unzipped folder using the Finder menu "File: Compress" option. Calibre should then be able to load the file into the main window without crashing.
My iMac is up to date with Snow Leopard and the latest version of Calibre is supposed to work with Snow Leopard, so I don't know what the problem is or what to do about it.
Just an FYI... Latest version is dated yesterday (21 May 2010). You may want to update it before retesting your HTML file import work flow as the new version strips ligatures which can create problems with some readers. Best of luck...

Standard version og gmail will not load, although it will on Internet Explorer. HTML version works OK.

Standard version of gmail will not load, although it will on Internet Explorer. HTML version works OK.

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete your google.com cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

HTML version 2.0 on 9204 ?

Similar Messages

Maybe you are looking for