HTML Widget not working with iBooks when exported

I've created an HTML widget for my iBook using Tumult Hype. The widget itself uses the draggable code. When I test it on Chrome and Safari, the code works fine. However, when I use export the iBook and test it on my iPad, the images are not draggable. This is also a problem with movie files, accordion drag and drop lists, etc.
Anyone know what's going on?

I never used iWeb08, but I just tried to make a site in '09 and my HTML widgets don't work either, on the web. They work if I publish to a folder.
The widgets load flash .swf files. I had to manually put them in the site folder on my computer, and in the widget I access them with a file name like "../flash/file.swf". It worked on the folder, but when I published to the site, they don't load.
Since iWeb doesn't know about the folder I stuck in there, I had to upload it to the site folder also. But that still doesn't fix the problem. I looked at the HTML widget source, and to me it looks like the file pathnames are correct, it just doesn't seem to be running the widget.
Anyone have a fix for this?
Thanks
Bob

Similar Messages

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Overdrive Media console not working with iTunes when transferring audio books.  Any suggestions?

    Overdrive Media console not working with iTunes when transferring audiobooks.  Some parts don't transfer.

    Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
    Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
    An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books.

  • Does handoff not work with iBooks?

    Just starting to get used to using handoff and really enjoying the ability to continue work from one device to another seamlessly.  But it doesn't appear to work with iBooks.  Is that the case or am I doing something wrong?
    Thanks

    I have a blog on my iweb site (published on another
    server, not imac) and I have a subscribe button but
    when you click on it, you get some weird message and
    can't post any comments. Does the blog not work on
    other servers??
    Blog will work with non .mac servers, but commenting only works for .mac server. You do have other option for non .mac servers: http://haloscan.com

  • Airport card 1.2.1 does not work with Ibook G3 with OSx.4.2

    I just purchased a brand new airport express base station. It seems to be up and running on my G4Imac just fine as a server.
    For the client,
    I have an ibook G3 and now have OSX.3.4 on it.
    I installed my ancient Airport card- 1.2.1 into the Ibook.
    I installed the new software from the new Airport base station.
    I tried to install the old software from the Airport 1.2.1 card but dont have Classic- so would not install.
    Now, the Ibook does not allow me to choose Airport in the Network Preferences section- does not seem to recognize there is a card installed. So, no way to connect to the base station.
    My questions:
    1.can OS X..3.4 recognize the old Airport 1.2.1?
    2. Does the software from the new base station support the old card when used in the client?
    3. Do I need different software for the card in the iBook other then the base station software? ie, is there card software that needs to be installed, and if so what is it in system X?
    Im trying to figure out if I have a hardward problem- ie the card or slot is not working- or s software problem.
    Can anyone help?

    MacOS 10.3.x has all the software to use an Airport card already installed. All I would recommend you do is install the Airport 4.1 update provided at:
    http://www.apple.com/support/downloads/airport41formacosx.html
    The software that ships on the CD that came with the Airport Express is only used to configure an Airport Express. It doesn't provide any software updates for the MacOS itself, nor for the Airport card installed in that Mac.
    First thing I suggest you do - run the System Profiler utility on your Mac. See if it identifies that an Airport card is installed. If it does not then recheck the installation of the card - ie pull out the card, then plug it in again and make sure it is fully seated into its socket. Remember to also attach the antenna cable to the card. If the System Profiler still fails to "see" the installed Airport card, then the card itself is likely defective.
    [Side note: Airport 1.2.1 was the version of the Airport software required to provide software support for the card in ancient MacOS versions. Airport 1.2.1 is not actually installed on the Airport card itself, so if you install an original Airport card into another Mac it makes no difference what Airport version was installed on the Mac the card was pulled from.]

  • Captivate 5 not working with LMS when linking to AICC published file

    When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

    another HotFix worked for me:
    This is with reference to the issue you are facing with AICC courses on LMS.
    Please follow the steps mentioned below and let me know if this solves the issue for you.
    1.       Close Captivate if already launched.
    2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
    3.       Navigate to folder “Templates”
    4.       Open folder “Publish”
    5.       Open folder “AICC”
    6.       Rename the HTM file “default.htm” to “default_old.htm”.
    7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
    8.       Paste it inside “AICC” folder.
    9.       Launch Captivate and open the project.
    10.   Re-publish the project and upload the content to LMS.
    Let me know if this solves the issue.
    Thanks,
    Ashwin Bharghav B
    Adobe Captivate Team
    hope it works for you!

  • Pasting code for HTML Widget, not working!

    Hello,
    I recently watched the support video for widgets and Adobe Muse, and the video stated you simply copy the code for HTML Widget, and once you paste it into Adobe Muse, Muse would be able to automatically recognize that it is a widget and it would paste correctly. However, when pasting my HTML code into Muse I literally get the code. Nothing appears!
    Any help would be greatly appreciated! Thanks!
    Brandon

    Brandon,
    If the code you're pasting appears  to Muse to be valid HTML to embed, it should automatically paste as an HTML page item. If it's pasting as text, it may not be valid HTML, or Muse might not recognize it.
    You can also choose 'Insert HTML...' from the Object menu, and then paste your HTML into the dialog box.

  • E4200 Not Working with ATV2 when wired

    I have an E4200 router & am trying to get it to work with ATV2 through HomeSharing & iTunes. It works fine when my PC is wireless & the ATV2 is wireless. BUT, when the ATV2 is wired via ethernet & the PC is wireless -- nothing! 
    PC is Win 7 64 - SP1
    ATV2 is 4.4.3 (3323) and the router is:
    E4200 is 1.0.03 build 14
    Help!!!!!

    Check the settings on the APTV2  for Airplay . The airplay symbol appears at the bottom right in iTunes and turn the APTV2 on...
    You can try the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • Captivate 6 Scalable Html Content not Working with Widgets.

    I am going to bring this topic up over and over again unti it gets fixed. The problem is not web browsers. The problem is Captivate and Widgets.  No Captivate project will scale properly that contains a widget. I have tested this over the years on Connect Pro, Apache Web Server, Wamp, and more. I have tried hacking Captivate with Widgets that Contain a NO_Scale line in the them and more. The project won't scale at all or if I manage to get scaling the sides and bottoms of the projects are cut off and view all of the module is funky. There has got to be a working solution to this. I have way too may project with Widgets so removing them is not a option.  I do not have a standard base to work from for monitor size so a working scale function is essential. Widgets are one of the things that sets Captivate apart from the competition and with out them I just as soon use another program.
    I was really hoping the new Scale Function in Captivate 6 would have fixed this but it did not.
    Sorry If I am not coming off as polite. This is problems that has annoyed me for years.

    Actually, the problem is with the widgets and the way they are coded, not with Captivate. 
    When this problem was first identified some years ago now, reqponsible widget developers were quick to release updates that resolved the issue.  You just needed to swap out the old widgets with updated ones that didn't cause the rescaling issue.
    If you're using lots of widgets, especially older widgets that were not updated in code, then you'll continue to have this issue.
    My suggestion is to make a list of all widgets you use,  test each one on its own in a project containing no other widgets, to see if it prevents rescaling, and if it does, replace or ditch the widget entirely.  If you can locate the original developer, find out if they have an updated version you can use.  If they don't, or they don't feel inclined to fix it (because there's no incentive to do so) then ditch the widget and find another solution.
    When they first came out in Cp4, everyone thought widgets would take the world by storm and be very profitable for their creators.  Neither has proven to be true.  They are certainly very useful additions to Captivate functionality, but I think you will find that a lot of the widgets developed early in their history now have nobody supporting them.

  • In IE7 CLSID In HTML File Not Working With 1.4 and 1.5 Plugins Installed

    Thanks in advance.
    I'm using JRE 1.4.2_03 with a CLSID attribute in my HTML file. It works fine with Internet Explorer 6. If I install a newer version of the JRE (i.e. 1.5.0) IE6 still uses the 1.4.2_03 plugin.
    But, when we install Internet Explorer 7, IE ignores the CLSID in the HTML file and starts the 1.5.0 plugin.
    Has anyone encountered this problem? If so, then how do I solve it?
    Thanks.

    Yes, I solved it by using this classid in the <OBJECT> tag in my HTML file:
    classid = "clsid:CAFEEFAC-0014-0002-FFFF-ABCDEFFEDCBA"
    The "FFFF" in the middle tells the IE browser to use the highest build of the major version of the JRE that you specifiy in the clsid. In the case of my example, above, the browser selects the highest build of JRE 1.4.2. But, the catch is that you have to install JRE 1.5.0 (I think it's 1.5.0_07) or later. Just install 1.5.0_11 and it will work. This may seem strange, but, for some reason, Sun didn't implment the fix in 1.4.

  • Isync not working with E61 when its supported in isync v3

    Hi Guys,
    I have isynced a Nokia E61 on my mac with no problems, but after backup the data on a pc via Nokia's own software I cannot isync up with the phone on th mac, I can seem to add it as a bluetooth device but when in Isync trying to add the phone (which is totally supported in 10,5) it says isync cannot connect to this device. Was it syncing with PC that did it? I had the latest Nokia software on the phone so did add any new software updates or the like. Any ideas? Cheers B
    Message was edited by: Andrew Brough

    exactly same here. 1. had a normal L7, synced it succesfully with my mac so i have all my numbers on the computer. 2. mobile was stolen so i went to get a new L7 at O2, little did i know they had given me a different phone. not able to sync with bluetooth, nor with USB. Also, have downloaded the 'plug-ins' but dont really know how to install them since they contain no programm, only some strange .plist files...but i take from you huub that it didn't sem to work anyway...spoke with O2, they told me to call motorola, spoke with motorola they told me to speak with apple, spoke with apple, after being thrown out of the line twice by the assistant (the easiest way to deal with a caller who asks strange questions..) i was told they had no clue and that i'd have to wait a few weeks possibly months till the next operating system comes out....i am about to explode...
    i do hope someone can help us here, im sooo frustrated!!!!

  • Destinations from an HTML file not working with Acrobat XI

    When the link is executed in Acrobat X it opens to the correct destination. When opened with Acrobat XI it doesn't. In fact, when I open the PDF (created with Acrobat Pro X) with Acrobat Pro XI I don't see any destinations... I don't see where to view them if they do exist. I already tried disabling the protected settings in XI and that didn't work. What happens is a dialog for downloading the PDF opens and your only choice is opening the PDF to the first page (instead of the destination). This is also happening on all browsers... so I am suspecting something buried in the Control Panel. Please help.

    Thank you but this doesn't help... I know where the destination pane is... that's how I created them... Acrobat XI is not showing the destinations but the issue is Acrobat XI opening a download dialog instead of following the destination. I think it's an application or Windows issue but I don't see it...

  • Ajax widget not working in iBook

    I wrote a simple jQuery widget that loads some string from a remote server and pops it into a text label or text area when a button is pressed.  The widget works like a charm in mac os x dashcode.  But when I preview the widget one my iPad 1 and press the button.  Nothing happens.  So then to make sure that the ajax call was even going out I put a simple mail function in the remote file to shoot me an email everytime the ajax call is made.  Sure enough when I press the button on the iPad i get an email.  But the text does not apear in the textarea.

    In the solution provided it misses the server part which is very important. You have to generate a javascript code on server side. It's a trick for JSONP.
    When using JQuery and JSONP, a <script src="http://www.sample.ca/web_lib/jsonp.php?json_callback=jQuery19109327708575874567_1368632112217"> tag is added in background in your DOM
    It means, based on the solution in frontend of mykg4orce that you have to implement a code like that in PHP on server side:
    <?php
    $array = array(
         "success" => true,
         "Firstname" => "Paul",
         "Name" => "Smith"
    header('Content-Type: text/javascript');
    echo $_GET['jsonp_callback'] . '(' . json_encode($array) . ');'; // it will generate something similar to jQuery19109327708575874567_1368632112217 ({ "success" : "true", "Firstname" : "Paul", "Lastname" : "Smith" });
    JSONP is a method to have cross domain scripts

  • HP LaserJet P1102w Not Working with Mac when connected via USB

    I'm using an old HP LaserJet P1102w - I installed the drivers and the software, and when I connect to my computer, nothing happens. It recognizes the printer, and it says that it's using "Generic PCL Printer" as the driver. The Print Queue has a good time pretending it printed things, and nothing comes out.
    Someone tell me how to fix this POS before I throw it out a window. 

    Hi oprachck,
    I see by your post you are having some issues printing from the Mac. I can help you, but I will need some more information.
    The driver  "Generic PCL Printer", wouldn't be the correct driver using the Laserjet P1102w.
    If you are using 10.8 or 10.9, the drivers are installed by the Apple Updates.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    If you are using 10.7 or lower the drivers can be downloaded from this link.
    HP LaserJet Pro P1102w Printer Drivers.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Wireless)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Migration assistant not working with iBook - macBook

    I have used migration assistant many, many times before. I just purchased a MacBook and my iBook is having trouble in firewire mode. It seems that the iBook will boot up in firewire mode, the migration will begin, but after 5 minutes the iBook freezes, and the dancing firewire icon stops moving. This is VERY frustrating as one might imagine. Any suggestions? I have shocked the pram on the iBook, I have restarted the process 10 times now. PLEASE HELP!!!!
    -i

    Did you reset PRAM on macbook as well?
    Also try to repair disk and repair permission on iBook.
    Good Luck.

Maybe you are looking for