HTML5 Courses still not fully compatible on iPad or iPhone

Hi,
I've created several courses in Captivate 7, and using the HTML5 tracker, I've made sure all the elements in the courses are HTML5 supported. After publishing the courses and putting them in the LMS, I've tried using them on my iPhone and iPad, and I keep getting a warning message (all the courses work fine on my Mac). The message says:
"This course is not fully compatible with your current device. You may encounter problems with some lessons."
I can open the courses fine, and can navigate through them, but I'm not sure what parts are not compatible. I found one video that's not working, and it seems that the quiz questions aren't working. Otherwise, they seem to be functioning fine.
Any ideas or insight would be appreciated!

Can you tell me what the "ini" file is? The warning seems legitimate because the quiz questions aren't working on the iPad or the iPhone. So it seems like more than an automatic error message.

Similar Messages

IMessage will not fully snych between ipad and iphone

Hi
I've been trying to fix this for a few hours now, and getting increasingly frustrated. My ipad and Iphone suddenly dont share iMessage information.
Both devices use the same email. I can send an iMessage from my ipad. This pops up on my iPhone. Cool. The reverse doesnt work. Anything I send from my phone keeps to my phone only. Anything coming in goes to my phone if its sent from there or from my iPad if its sent from there.
More frustating is this used to work fine.
This makes my ipad un-usable for work. Apple seems to make getting any support stageringly difficult. The Apple site actually told me there was no walk in service available in my area. Im in central London!
Please help.
Many thanks
Jez

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

HT1766 I accidentally deleted a picture from my iPad. I did follow the steps to back it up, but it's still not back on my iPad.

I accidentally deleted a picture from my iPad. I did follow the steps to back it up, but it's still not back on my iPad.

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

HTML5 Video won't play on my ipad or iphone.

A video I encoded for mp4 and built in HTML5 won't play on my ipad or iphone.
It plays fine on Safari on MacBook as well as Google Chrome on Windows7, both in the HTML5 player.
I have encoded the mp4 in a program called HandBrake using H.264 for video and AAC for Audio and the device set to ipad (I also tried iphone).
URL is timken.com/sites/momentoftrust/en-us/documents/html5.html
The video is at timken.com/sites/momentoftrust/en-us/documents/maddy_ipad.mp4
I am just stumped as to why the video plays fine in the HTML5 container on a MacBook using Safari but will not play on the ipad or iphone.

Slamb0513-
The video you have at the html5.html URL is different from the other, but it also plays when downloaded and transferred to the iPad.
I didn't examine your html5.html file. I take it you are not hand-encoding, but using a program that does that for you. Here is the html line I used to download one of your files:
<LI> <A HREF="http://timken.com/sites/momentoftrust/en-us/Documents/pr6.mp4">MP4 Test</A>
I downloaded the mp4 file by right-clicking the URL and selecting Download Linked File As. Just clicking the URL plays the video on the Mac Pro's Safari, but I don't know how to test it on the iPad.
Fred
Message was edited by: Fred*M.

When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... thanks for your support..

HI!, When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears ...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... buth still not working

Restart your AirPort Base Station or other router if that's what you have. Unplug it and allow a moment or two for it to reset before plugging it back in again.
If that does not work, try resetting your network settings: on the iPad and iPhone, tap Settings > Wi-Fi, select your network then "Forget this Network". Select the network again, provide its password, and verify you can connect.
If that does not work, Settings > General > Reset > Reset Network Settings. Select your network again as above.
If that does not work, "hard reset" your AirPort Base Station, assuming you are using one and not some third party product. You will need to reconfigure it using AirPort Utility.

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.

Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.

Make the emails do not show in the ipad or iPhone after i read them in my macbook air

make the emails do not show in the ipad or iPhone after i read them in my macbook air

Assuming you're using Apple's Mail on your Mac, go to your Mac's mail Preferences (from Mail on the menu bar).
Click Accounts on top, then click your email account on the left.
Then click Advanced on the top.
Check "remove copy from server after retrieving a message" and set the line below it to "immediately".
That will do it.

My site does not come up on iPad or iPhone.

Why does my site not come up on iPad or iPhone?
It's fine on the computer.

You will need to learn how Muse handles mobile devices and the options for it. I do not use Muse (hate it) and you may want to post in the Muse forum for help.
The reason is because you have seperate page linked via a media query in your head. It links to http://www.sheargrafix.com/tablet/index.html for mobile devices.

Hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

hiii . i have encountere a problem . my notes app are not syncing in my ipad and iphone . plz help

Hi marcmartineau,
I'm not sure why this is happening, but I think I'm seeing the same thing. Many times when I get an email on the iPad or iPhone with a picture attached, I don't see the picture but instead just a placeholder icon.
I have found a work around though to at least see the picture. If I forward it and include the attachment, I see the picture in the outgoing email. I can even save the image from the sending email if I really don't want to send it. If i do send it to myself, chances are I will see the picture in the email when I receive it even though it's just a resend of the original.
weird.

My Mac is not syncing with my ipad or iphone. Entries on either my Ipad or Iphone syncing with each other but not to my Imac.

My Mac is not syncing with my ipad or iphone. Entries on either my Ipad or Iphone syncing with each other but not to my Imac.

iCloud: Troubleshooting iCloud Calendar
iCloud: Advanced Calendar and iCal troubleshooting
Sync Services: Advanced troubleshooting for contact and calendar syncing

HT204291 Tried everything, and I mean everything and still NO airplay icon on iPad or iPhone.

Tried everything, and I mean everything and still NO airplay icon on iPad or iPhone. Help...........!!!

Yes, everything connected on the same wifi network, performed every fix I can find, but no luck. :( Grrrrrrr.......

Web pages are not fully functional on iPad

Until recently I was enjoying my experience with my iPad 2. I went to Netflix to write a review for a film and was unable to do so. For whatever reason, I am unable to select the desired stars for my rating. While obviously this is not a deal breaker, it is frustrating knowing that some web sites are not fully functional with my iPad. I hope this changes in the future. Cheers.

Here we are over 2 years after the original post and I am having this problem too. Having it in both Safari and Chrome. When I first got my Ipad 3 I was able to rate movies (select star from red to yellow) on the netflix.com website. Somewhere along the line that quit working. Everything else on the site works even radio buttons on page where you select types of movies you watch and how much. At first I thought something on the website changed but then I got a new Ipad 3 at work, low and behold, I was able to rate movies by selecting stars. So what's the difference? Tried deleting history, cookies etc. Removing apps and rebooting. Long story short, I reset my Ipad deleteing all user info and settings and setting up as a new Ipad and it still doesn't work. I can't find any settings on the website itself that affect this. Anyone?

HS-20/AD-41 headset is not fully compatible with N...

The remote control works until the Music Player actually plays tracks, but it won't control the paused or stopped player if the keypad is locked on the phone or the Music Player is in the background. It means that if I paused or stopped the music for some reason I have to pull out the phone to unlock the keypad to get the remote control working again. And Nokia lists the N80 as compatible with this headset...

09-Oct-2006
03:53 PM
zvicohen wrote:
Same with an N73, so it's not just the N80 that is not compatible with the AD-41.
N73 is fully compatible, all you need to do to make the buttons work is plug the pop port without the 3.5 headphone jack connected to it. As soon as the phone recognize the headset, that is the time to plug in the 3.5 jack. Good luck!!!
There are 10 kinds of people...the ones who know binaries numbers and the ones who don't.

Can't hide rows; not fully compatible with Excel files

This program has not been fully thought out in its design. I wish I had not bought it; I mistakenly assumed that Apple would have made it fully compatible to other spreadsheet templates, with basic features equal to Excel.
If I want to use this program in my business, I have to rewrite my spreadsheet templates!!!
I will certainly think twice before paying good money for Apple software that is supposed to replace other business software, if I bother considering it at all.

Hi Glenn,
Welcome to Numbers. Yes you can hide rows and columns.
What I do is this:
1. To hide row 8, move mouse over the number 8 for row 8
2. You'll now see a drop down arrow to the right. Click on the arrow you'll see Hide Row.
3. The same technique applies to columns as well.
To further help you allow me to suggest reading the Numbers help file. Quote:
Hiding Rows and Columns
Hide specific rows or columns when you want to avoid showing or using them but don’t want to delete them. While a row or column is hidden, it can’t be reformatted, merged, split, or otherwise manipulated. However, any formula that uses a hidden cell isn’t affected, and sorting takes hidden values into account.
To hide a row or column:
Choose Hide Row or Hide Column from a row or column reference tab’s pop-up menu.
To show hidden rows and columns, choose Table > Unhide All Rows or Table > Unhide All Columns.
Rows or columns that are hidden in Numbers tables aren’t visible when the tables are copied into other iWork ’08 applications. To see the hidden rows, select the table and choose Format > Table > Unhide All Rows or Unhide All Columns.
Unquote
It's my hope all the above helps you. If this isn't what you're looking for then I've misunderstood your question so please post back. If it is what you're looking for please let us know as well.
Sincerely,
RicD

HTML5 Courses still not fully compatible on iPad or iPhone

Similar Messages

Maybe you are looking for