Html5 isnt working correctly in inline frame tag

hello guys, i have wrote an html5 video player.. it works perfectly, but when i put it into my JSF page in inlineFrame it says "no video with supported format and Mime found " does anyone what is the problem here ?? am using JDev 12.c

There is mime-type mapping in the web.xml, a quick search should reveal some documentation on this.

Similar Messages

My trackpad isnt working correctly

When i woke up today my trackpad was just working incorrectly, when i use the left click, it works as it was the ¨enter button ¨ for example in safari when i look for a webpage, for example facebook, when i click the direction bar to start writing, the search starts immediately and i havent even type the webpage yet, other example is here, while im typing this and i make a left click, it takes it as the enter button and this line that indicates where im writing goes down, like this.
im writing, then i use the left click
and now im down.
My trackpad works as the enter button
Can someone tell me what is happening ?
When I restart my laptop the trackpad stills working incorrectly but when i turn it off and then i turn it on it works correctly for a short time and then
starts to work incorrectly again :S
please can someone help me?
Message was edited by: rafasaenz

Try resetting your SMC and pram. Follow the instructions for resetting the SMC for the type of MacBook you have.
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

WRT54GSV7 Wireless Internet Just isnt working correctly..

I have been on the phone with AT&T and Linksys for the past 5 days for hours at a time trying to figure al lthis out and its still not 100% right. This NEEDS to get solved.
Heres the basic simple rundown. I recenetly had to reinstall XP Pro on my laptop. So I then had to re-start both my DSL modem and Linksys Wireless Router to factory defaults to get everything set up again.
My setup: My desktop running XP has the router and modem plugged into it. I have 2 laptops pulling wireless connection from the desktop. One laptop running XP, and another running Vista.
So I have AT&T DSL service. I am aware of my PPPoE Username and Password. I plug my modem straight into my desktop, and internet works fine. So then I plugged it into the Wireless Router, and into my computer. I went into the router settings (http://192.168.1.1) and the only things I did were:
Set the Internet Connection Type to : PPPoE
Set the correct password/username for the PPPoE
Clicked Save
Went to Wireless
Set the Channel to 11
Changed the Network Name to DCL
Clicked Save
Went to Wireless Security
Set the Security Mode to WPA Personal
TKIP
And set the shared key
Clicked save
This is ALL I did with my wireless settings. I could then get on wirelessly via my laptops. But my moms Vista laptop would drop connection randomly. My computer also started to drop the connection randomly too. From every hour, to every couple of minutes, to not for 2 hours at a time.
It would just connect me to another Wireless Network, then I would just open the network connections and connect back. It would connect RIGHT back.
Also I noticed today, my laptop said "This computer cant share IPS" or something like that.
I really need to get this solved. My internet worked FINE prior to re-setting everything. Is my Wireless set up correctly? Did I do the right settings? Miss some settings?

On all Vista computers, disable IPv6 under the LAN properties for all adapters. On the router, disable UPnP. Under wireless set Beacon Interval 75, RTS and Fragmentation threshold to 2304. Wireless channel 1. Reboot computers and try again.

My LR 5.4 Crop Tool isnt Working correctly?

I just bought a new Macbook Pro 15" fully loaded with the 27" Monitor, I am running Mac 10.9.2 Mavericks and just updated to LR 5.4. It is the second time I have used LR on it since I bought it. When I went to crop a photo from 4X6 to 8X10, it is not changing the photo in the view. It looks like the thumbnails show it changed, but I would like to see it in the full view. I have tried rebooting it, and still get the same results, can anyone help me out? I have never had this problem in 4 years of use.

Have you restarted Lightroom and your PC?
RMIPhoto wrote:
I'm having the same problem on a Windows 7 PC after installing LR 5.4.
When you crop a photo in the develop module and click close, the crop is not reflected in the work area. Likewise, no changes that I make: white balance, exposure, etc. are being reflected in the work area.
If I make a bunch of changes and then create a virtual copy, all of those changes including the crop are reflected in the virtual copy, but nothing changes on the photo as I am working.
Not an acceptable way to work!

Java isnt working correctly...

It never really loads...stalls out waiting for game...it all runs really slow

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java
Do you really mean the Java plugin or do you have a problem with JavaScript?
In case of Java you may have to add a security exception.
There has been a change in the Java security settings, see:
*http://kb.mozillazine.org/Java#Java_security_prompts
*"What should I do when I see a security prompt from Java?":<br>http://www.java.com/en/download/help/appsecuritydialogs.xml
If you visit a website regularly then a possible workaround is to add the URL to the Java Exceptions Site List, see:
*"Why are Java applications blocked by your security settings?":<br>http://www.java.com/en/download/help/java_blocked.xml
*"How can I configure the Exception Site List?":<br>http://www.java.com/en/download/faq/exception_sitelist.xml

HT201401 my imessage isnt working correctly?

My imessage is on but says is waiting to be activated and not allowing me to send imessages and its very frustrating that all my messages are sending as text messages..

Apple's servers are currently down. As you could also have learned by reading the forum before posting. See: http://www.apple.com/support/systemstatus/

My iMessage isnt working correctly....

I write a messge to my friends but i dont see the message or there reply....
I have tried log out restarting the program still the same problem once i log back in..
does anyone have the same problem?

Hi Karisam,
Try this:
Open a Finder Window
Click on the "Go" in the above status bar
Press and HOLD the "option/alt" key
the "Library" should appear in the Go list
Click Library still while holding the option/alt key
Go into Preferences
Look for com.Apple.imessage.bag.plst
Move that file to the trash
Delete the trash
Restart iMessage
This should hopefully resolve your issue.
Message was edited by: DLMiller

HT4528 My iPhone 4s isnt working correctly

My iphone 4s is not turning on. When I conect it to my Macbook it conects but when I click restore it gives me the code 1600. Now my iPhone will come on but either to an apple screen or just a white screen that has nothing else on it. I need help, what should I do? my carrier is Verizon. I have already brought it in once but that didnt help. I just ordered an iPhone 4, but I would like to keep my 4s. Help?

Your iPhone 4S has full Warranty Coverage with Apple. These are Hardware Errors, maybe due to faulty battery. Make Genius Reservation and take or send iPhone to Apple for resolution under Warranty.

The sound on my device isnt working correctly.

When i plug in headphones ( i tried several different sets) it doesnt recognize them and only plays on full volume through the right headphone reguardless of the volume slider and the left one gets no sound. If i do move the volume slider with the headphones in the volume coming through the built in speakers does change.
edit: its an ipod touch 3rd gen

Try the folowing to rule out a software problem
- Reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have a problem then you likely have a problem with the headphone jack on the iPod. I would make an appointment at the Genius Bar of an Apple store.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

HTML5 not working, black screen after first frame

I cannot get html5 to work on Firefox for Android. If I download the file it plays fine on VLC. I'm using an LG Volt.

Any gfycat link.
ex: http://gfycat.com/OptimalImpoliteGecko
I also found out it doesn't play flash correctly either (I installed the flash plug in)

Calling a function with a frame isnt working

now i have a problem :
i have made a function called showFrame and i call it from another class and it isnt working :
the problem is on line marked as *** where i call to showFrame()
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.Date;
public class colorsMain {
    static daromConnect myCon = new daromConnect();
    static long pNextTime = 1000;
    public static void main(String[] args) {
        try {
            myMsg.write("ss");
        } catch (IOException e) {
            e.printStackTrace(); //To change body of catch statement use Options | File Templates.
        new Thread(new Runnable() {
            public void run() {
                while (true) {
                    try {
                        Thread.sleep(pNextTime);
                    } catch (Exception e) {
                        System.out.println("Error :" + e.getLocalizedMessage() + " at : " + new Date());
                    System.out.println("10 seconds");
                    myCon.showFrame();///****problem on this line
                                        pNextTime = 1000 * 60 * 5;
                    //   System.exit(0);
        System.exit(0);
CODE]
and the second class with showFrame :import JavaCom.atidProgram;
import JavaCom.atidProgramsGroup;
import JavaCom.atidRecordSet;
import javax.swing.*;
import java.util.Date;
import java.lang.*;
import java.sql.*;
import java.util.StringTokenizer;
import java.util.ArrayList;
import java.lang.String;
import java.awt.*;
import java.text.*;
public class daromConnect {
private static boolean pIsWorking = false;
private static int pTimeFromDarom = 30;
private static JFrame jf = null;
private static JLabel label2 = null;
public static void SetTotalTimeFromDarom(int tm) {
pTimeFromDarom = tm;
public static boolean getIsWorking() {
return pIsWorking;
private static void setIsWorking(boolean flag) {
pIsWorking = flag;
private static int getIndex(String str, final String[][] unit_table) {
for (int i = 0; i < unit_table[0].length; ++i) {
if (unit_table[0].equals(str) == true || unit_table[1][i].equals(str)==true)
return i;
return 0;
public static void showFrame() {//this is the function i call
jf = new JFrame();
label2 = new JLabel("000");
label2.setSize(30, 300);
label2.setFont(Font.decode("Web Hebrew AD"));
jf.getContentPane().add(label2);
jf.pack();
jf.setVisible(true);
public static void main(String[] args) {
setIsWorking(false);
why isnt it working?
thnaks in advance
peleg

Right off the bat I can see that you aren't starting the thread. Try:
    Thread t = new Thread(new Runnable()
      public void run()
    t.start();

My imessage isnt working, it says that it cant validate email adress, When it is the correct one and completly valid.

i tried and tried adn tried again, but it isnt working! I reset my ipod and even reset my wifi. but it still isnt working! my email is "valid" i was jusy on it today. It was also working before I started traveling to see family. I am still in the country, i thought that it would still work. HELP!

iMessage servers are down. Check this website for more information and updates http://www.apple.com/support/icloud/systemstatus/

[JS CS3] Modify geometricBounds of Inline Frames in Overset Text

Hello,
I have the following setting:
I recieve a XML file , which contains <image href="..."> tags. InDesign automatically inserts the correct images as an inline frame.
The layout column are too small for the large images, so when placing the XML into the layout, the whole content is in the overset.
Inline frames in the overset do not have any geometricBounds. Can I modify width & height of frames in overset text? And how do I do that?
Thanks
Tobias

Thanks Robin!
I helped myself with the following:
with(myElement){
     // get img objects
     var theImage = myElement.xmlContent;
     var theImageFrame = theImage.parent;
     theImageFrame.appliedObjectStyle = myDocument.objectStyles.item("Img_free");
The objectStyle "Img_free" sets the image frame from "inline" to "anchored frame". So the size of the image doesn't matter any more because its outside ("free") of the text. So everything flows into visibility and I can change whatever I want. (Yes, I must not do this with a object style, but it felt right to do so.)
It's basically a similar way to your description. But I had hoped that there would be a somewhat "cleaner" way to do that. In my eyes it is more a workaround ...
Any further suggestions?
(How do people scripting InDesign Server do such things?)
Thanks
Tobias

Wallaby animation isn't working correctly after app update

Hi DPS fellows,
This afternoon I've updated my Adobe Content Viewer and all my wallaby animations began to work in a different way.
It's just fades in instead of doing the animation.
Most of them are just animated letters for a headline. The animations consist in each letter appear at different time, sometimes coming form right, some form left or from the top of the page, but after the updated, they just appear in a fade in. Before tha worked pretty fine.
Does anybody here knows how to solve that?
Thanks a lot.

Hi!
I have a German manual with a step by step list. How you can use Path-Objects (Text and Frames) for an Wallaby HTML5 animation. And used in the Adobe DPS Folios.
If you want to have the manual in German, I can send you this e-mail tomorrow!
Bye!
Von: Felipe - dualpixel [email protected]
Gesendet: Mittwoch, 13. März 2013 22:10
An: D4c_Rene
Betreff: Wallaby animation isn't working correctly after app update
Re: Wallaby animation isn't working correctly after app update
created by Felipe - dualpixel <http://forums.adobe.com/people/Felipe-dualpixel> in Digital Publishing Suite - View the full discussion <http://forums.adobe.com/message/5146016#5146016

Html5 isnt working correctly in inline frame tag

Similar Messages

Maybe you are looking for