HTTP/1.0 500 error

Hi,
Scenario : Slap and Ship Outbound scenario using SAP AII 5.1
Issue: Currently I am setting Up RFC Connections for the Auto-ID Test Tool.
When I test the NOTIFY_TAGS_OUT RFC Destination, I am getting the below error
HTTP/1.0 500 SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")
Please suggest me, how to resolve this issue.
Regards
Sara

The same issue is encountered here. Not getting any clue how to resolve it. Even if it occurs once in several instances, it is not acceptable. Need to resolution for not repeating same error.
The use case is like this.
There is an ESB service, which is calling another BPEL service. This BPEL service is using Database adapter to populate data to db table. On execution of this, it is populating the data to the database table successfully. Still it is throwing error.
So in my view, this is not the case of wrong end point URL. Otherwise it would not able to populate the data.
If the only other thing is using correct security realm, would you please let us how we can verify that?
Or please let me know, if this has any other cause?
Thanks In Advance
priyadarshi

Similar Messages

  • HTTP response code 500 : Error during Sender Agreement Determination

    I am trying a simple file to file scenario and messages are not being received in Integration Server.
    Through communication channel monitoring, i have received the below error message.
    Error Transmitting the message to
    endpoint http://<hostname>:50000/sap/xi/engine?type=entry using
    connection File_http://sap.com/xi/XI/System failed, due
    to:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException:
    Received HTTP response code 500 : Error during Sender
    Agreement Determination.
    Can you please help
    Regards
    Harish

    Hi Harish,
    http://<hostname>:50000/sap/xi/engine?type=entry
    it should be http://<hostname>:8000/sap/xi/engine?type=entry not 50000 as port It should be your HTTP port...please .make the changes !!
    In SXMB_ADM transaction under Integration engine configuration please change the settings to http://<hostname>:8000/sap/xi/engine?type=entry
    make sure with your basis team that ur http port is 8000 or 8001 ..as per that make the necessary changes..
    Regards,

  • Received HTTP response code 500 : Error during conversion of XI message

    hi
    Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
    This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
    01.09.2011 12:02:32     Information     The message status was set to DLNG.
    01.09.2011 12:02:32     Error     SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
    01.09.2011 12:02:32     Error     Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
    regards
    sandeep
    Edited by: pendyalas on Sep 1, 2011 12:20 PM

    I found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
    i will try and see if it works.
    AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
    regards
    sandeep

  • HTTP response code 500 : Error during parsing of SOAP header

    Hi Experts,
    I have a MAIL to IDOC scenario.  An external third party emails invoices to our inbox - which we pick up and process the attachment.  All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
    When I look at the SOAP header of the failed message I see the values from the dump in this field:
      <sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
    Can anyone tell me what SHeaderTHREAD-INDEX does?  Or what my problem is  (Our email is Outlook)
    ERROR MESSAGE.........
    SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage:  ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
    Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.

    We work with Microsoft Outlook, but I'm sure this could work with any email system.
    This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company.  This is set up as a regular email account.  On this email put a forward rule to email2 for a particular sender/subject.  email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
    Doing this accomplishes a couple of things:
    1)  We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
    2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
    3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
    Hope this helps your situation.

  • Windows Azure Pack - Server returned HTTP response code: 500 error while accessing the public tenant API

    Hi,
    We are facing the following error while trying to access the given Windows Azure Pack Public tenant API to query the virtual machines list along with network adaper details - 
    java.io.IOException: Server returned HTTP response code: 500 for URL: https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10000&$skip=0
    The response is proper when we access the following URL - 
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines
    Only on adding the $expand=VirtualNetworkAdapters, url parameter we are getting the above error.
    Where can we check for the error logs on the Azure Pack server ? We checked for the logs using Windows Event Viewer but did not find any for the public tenant API.
    What should be the cause for such an error and how can we fix this to get the proper data?
    Thanks in advance.

    Yes, we tried this, $top=10&$skip=0 works for the following url
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$top=10&$skip=0
    It is only when we add $expand=VirtualNetworkAdapters,
    the server returns the mentioned error response - 
    URL for which the server returns the 500 error -
    https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10&$skip=0
    Can
    you point to the error logs for Windows Azure Pack and SPF ?

  • XML Form Build Error Unexpected http response code 500: Error

    Dear All,
    I am facing the error when I am starting the XML Forms Builder.The tool checks the environment in which the XML Forms Builder is running (xfbuildertest.html)
    I am getting the following result :
    - Test: Connection Tests
    - ! Test Failed !
    - A test in the suite failed
    - Test: XML Forms Builder Version
    - ! Test Failed !
    - Unexpected http response code 500: Internal Server Error
    Test: Load Global Settings
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    - Test: Load Project List
    - Not Started
    - This test depends on the test "XML Forms Builder Version", which did not complete successfully
    Please help me.
    Regards
    Pravesh

    Hi Lorcan.
    So what exactly happens when you try to start XML Forms builder, do you get an actual error or does it just not start at all?
    > Actually the News are not getting displayed . The HTML (Html tages)are not getting rendered properly in XML Form Builder.
       This news are perfectly working in other environment  (Dev/Qlty) but not in Production .. where i am facing the issue of rendering the news ( not in correct format as expected)
    It is appearing as link. where as in my other environment the Text in proper HTML format.
    (Link of News appearing in production) whereas in Dev/Qlty proper text with Heading/Font/Colour appears. Or are you only seeing errors when you run the environment check?
    > I am getting the errors when running the environment check on in Production but not in Development/Quality.
    Did you try it on different clients or with different users? Is this a new installation or have you recently upgraded? Are all your components on the same SP level?
    > This is new installation but SP level are exactly same across the system(Dev/Qlty/Prod).
    Also the check the settings and found proper..
    Root Directory * /usr/sap/<System-ID>/SYS/global/config/cm/etc*
    Please let me know am I missing something..
    Why its not running on my production system.
    Regards
    Pravesh

  • How do I (re-) set the error page which comes up with an HTTP 404 or 500 error?

    I've running Mozilla 3.6.6 with more than a few plug-ins.
    Somehow, the browser brings up a yahoo search page when it hits a 404 or 500 error.
    I looked in about:config and didn't see anything obvious.

    Thanks for the swift reply, cor-el - unfortunately, no joy with this approach.
    A. As my named user (called "greg", surprise, surprise, no secret there...)
    Run Firefox; select Edit > Preferences > Advanced : Encryption:
    Here I get no option for Certificates, but I do get View Certificates - then tabs for:
    - Servers, under which my company's remote logon URL is listed - Edit button is grey
    - Authorities, under which the Verisign...G5 entry may be edited; 3 options:
    1. may identify websites (ticked)
    2. may identify mail users (unticked)
    3. may identify software makers (ticked)
    I ticked 2, tried again - same failure. Unticked it.
    B. As root.
    Run Firefox; select Edit > Preferences > Advanced : Encryption:
    Here I get no option for Certificates, but I do get View Certificates - then tabs for:
    - Servers, under which my company's remote logon URL is NOT listed
    - Authorities, under which the Verisign...G5 entry may be edited; 3 options:
    1. may identify websites (ticked)
    2. may identify mail users (unticked)
    3. may identify software makers (unticked)
    I ticked 2 and 3, tried again - same failure. Unticked them.
    Maybe a solution would be, in some way, to add my company's remote logon URL to the list of Servers while running Firefox as root. The Export and Import buttons may help here. However, when I first declined their certificate I was running Firefox as greg, not as root, so I am a bit suspicious there - what can be done as greg should be undoable as greg.
    This is doing my head in. Maybe it's time to step back and think a bit. Maybe try Citrix's online help (already spent a fair amount of time there with no joy either).
    So, thanks again for the reply - I've generally tried to provide a good list of what's up, and your reply has given me food for thought. OK, I'll keep trying.

  • HTTP Response code 500 ERROR

    Dear All,
    I am using Tomcat 4 and J2SE 1.4.2 and winXp. I am try to write a simple server/client program using servlet to connect them.
    I am using URLConnection in client side to connect server. However, when i try to get the input/output stream from URLCOnnection object, Error Occur
    java.IO.Exception: server response return code: 500 for URL http://localhost:8080/examples/servlet/CPServlet
    I dunno why it happens, Can you tell the reason or simply tell me the solution.
    Below is my code
    // Client
    import java.net.URL;
    import java.net.URLConnection;
    import java.io.*;
    public class Customer
         ObjectInputStream oin = null;
         ObjectOutputStream oout = null;
         URLConnection conn = null;
         public Customer()
              try
                   URL url = new URL("http://localhost:8080/examples/servlet/CPServlet");
                   conn = url.openConnection();
                   conn.setDoOutput(true);
                   conn.setDoInput(true);
                   conn.setUseCaches(false);
                   conn.setRequestProperty("Content-type","application/x-java-serialized-object");
                   conn.connect();
                   oin = new ObjectInputStream(conn.getInputStream());
                   //oout = new ObjectOutputStream(conn.getOutputStream());
                   System.out.println("Connected");
              catch (Exception e)
                   e.printStackTrace();
                   System.exit(1);
         public static void main(String[] args)
              Customer cust = new Customer();
              try
                   //Message msg = cust.receiveContent();
                   //System.out.println("Received " + msg.getInt());
              catch (Exception e)
                   e.printStackTrace();
                   System.exit(1);
         public Message receiveContent()
              Message msg = (Message)MyUtil.getObjectThrSocket(oin);
              System.out.println("Successfully receive content from Server");
              return msg;
    // Server
    import java.io.*;
    import javax.servlet.http.*;
    import javax.servlet.*;
    public class CPServlet extends HttpServlet {
         // field
         ObjectOutputStream oout = null;
         ObjectInputStream oin = null;
         public void doGet (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
              System.out.println(request.getMethod());
              response.setContentType("application/x-java-serialized-object");
              oout = new ObjectOutputStream(response.getOutputStream());
              oin = new ObjectInputStream(request.getInputStream());
    Thanks

    I'm new to Servlet development, but I'll try to help.
    The error code 500 usually means the servlet is confused, so you will want to focus server side. And in your case, you have created an output stream on your response object before you have created an input stream on your request object. I don't think that is correct. I think the order of those two processes needs to be reversed. Read the request headers first, then construct the response.

  • Proxy error - HTTP status code 500

    Hi,
    Scenario: Asynchronous Proxy (R/3 4.7) to 3rd Party (JDBC)
    We applied patches to JAVA on the XI side to fix a bug, the process worked before the patches. I am now getting an error on R/3 i.e. the data is not reaching XI.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Integration Server
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="500" p2="Error during conversion of XI message" p3="" p4="">HTTP.HTTP_STATUS_CODE_NEQ_OK</SAP:Code>
      <SAP:Text language="EN">HTTP status code 500 : Error during conversion of XI message</SAP:Text>
      </SAP:ErrorHeader>
    Any ideas. Thanks,
    Leanne

    Hi,
    SAP requested we implement patches, this sorted out the proxy issue. The message now arrives in XI.
    I have now encountered another problem, this process was working prior to the patches being implemented. I noticed that the communication channels now look different, any ideas?
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: JDBC Adapter configuration not initialized: null</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks,
    Leanne

  • Server returned HTTP response code: 500.. i need help

    i have this applet that communicates with a servlet.. when the applet connects to the servlet, i get the Server returned HTTP response code: 500 error.. when i am testing in my own pc, everything is fine.. when i tried deploying it in a server, the error occurs.. i do not have any idea what is wrong.. please help

    sir, what do you mean by trace?
    here is what i got from the java console..
    java.io.IOException: Server returned HTTP response code: 500 for URL: http://mental_boi.s46.eatj.com/myServlet/loadMap?action=load&fileName=http://mental_boi.s46.eatj.com/CityNavigator/mapSpain.svg
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at edu.citynavigator.map.editor.MapEditor.loadMap(MapEditor.java:685)
         at edu.citynavigator.map.editor.MapEditor.init(MapEditor.java:130)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    java.lang.NullPointerException
         at java.io.StringReader.<init>(Unknown Source)
         at edu.citynavigator.map.editor.MapEditor.stringToSVG(MapEditor.java:703)
         at edu.citynavigator.map.editor.MapEditor.init(MapEditor.java:131)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    and does the applet have to be signed?
    Message was edited by:
    hardcoder

  • Getting HTTP 403/500 errors when accessing SharePoint 2010 pages

    Hi,
    I'm getting intermittent HTTP 403/500 errors when accessing SharePoint Foundation 2010 pages.
    When it happens, any SharePoint pages I access I get a HTTP 403 error (example: /sites/test/default.aspx) . If I don't specify a page, I get a HTTP 500 error (example: /sites/test/). What's odd is that I have non-SharePoint .NET applications running on the
    same server under the "_layouts" directory and those still work just fine.
    After recycling the IIS application pool, it starts to work again, but sometime won't stay up very long.
    Does anyone encounter this problem before?
    TIA
    Also, I'm hoping to understand what the "Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo" method does to help me track down this issue. If you have any info on what the above method is doing, I really appreciated.
    EVENT LOG
    Nothing
    ULS LOG
    System.Runtime.InteropServices.COMException: Cannot complete this action.  Please try again.   
     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
    Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
    Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
    Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)  
     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
    Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
    Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
    Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)

    These are the associated lines in the ULS.
    01/07/2014 02:59:24.33    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    Logging Correlation Data    xmnv    Medium    Name=Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)  
     e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.48    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.48    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    Monitoring    b4ly    High    Leaving Monitored Scope (PostResolveRequestCacheHandler).
    Execution Time=6.79828022835305    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.48    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    Runtime    tkau    Unexpected    System.Runtime.InteropServices.COMException:
    Cannot complete this action.  Please try again.    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32
    iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid&
    pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl,
    Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
    Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
    String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage,
    String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders,
    String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
    pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.48    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.48    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.50    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.51    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.51    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    General    8kh7    High    Cannot complete this action.  Please try
    again.    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    01/07/2014 02:59:24.51    w3wp.exe (0x1988)    0x10A4    SharePoint Foundation    Monitoring    b4ly    Medium    Leaving Monitored Scope (Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)).
    Execution Time=187.132582493026    e8e08e76-1b88-4913-bce6-b9300e7b63f6
    Thanks,

  • HTTP 500 error when opening a legacy shared mailbox in OWA 2013 (Exchange 2007/2013 coexistence environment)

    Hi,
    Our Exchange 2013/2007 coexistence environment is set up and all is working apart from this:
    Mailbox A has full permissions to Mailbox B. Mailbox A is migrated to Exchange 2013, but Mailbox B remains on Exchange 2007. If I login to Outlook Web App 2013 as Mailbox A and then "Open another mailbox..." and select Mailbox B, a new window opens
    up saying "HTTP 500 Internal Server Error". The URL it is trying is :
    https://webmail.ourdomain.com/owa/[email protected]/?offline=disabled
    ( I can open Mailbox A in Outlook 2010 and do "Open Other users's folder.." and Mailbox B opens up just fine. )
    Our legacy CAS server's External and Internal URLs are set to :
    https://legacy.ourdomain.com/owa
    and the Exchange 2013 CAS server's External and Internal URLs are set to :
    https://webmail.ourdomain.com/owa
    We have FBA enabled on both the E2K7 and E2K13 OWA
    In the IIS logs:
    2015-03-02 16:36:50 <E2K13_IP> POST /owa/service.svc action=SubscribeToNotification&UA=0&ID=-25&AC=1&CorrelationID=c2899211-568d-4da4-a163-351a8621c9fd_142531419466924;&cafeReqId=7ffae082-a96f-42fd-85f8-bf23775ed5de; 443 ourdomain.com\MailboxA
    <LoadBalancer_IP> Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    https://webmail.ourdomain.com/owa/#path=/mail 200 0 0 109
    2015-03-02 16:36:50 <E2K13_IP> GET /owa/ offline=disabled&CorrelationID=<empty>;&cafeReqId=7c8e137f-cdb7-4449-9cb8-f36f94539244; 443 ourdomain.com\MailboxA <LoadBalancer_IP> Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    - 500 0 0 265
    In the OWA HTTP Proxy logs:
    2015-03-02T16:36:50.096Z,7c8e137f-cdb7-4449-9cb8-f36f94539244,15,0,913,7,,Owa,webmail.ourdomain.com,/owa/,,FBA,True,ourdomain.com\MailboxA,ourdomain.com,[email protected],Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2;
    .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0),<LoadBalancer_IP>,<Exchange2013ServerName>,500,,ServerNotFound,GET,,,,,ExplicitLogon-SMTP-Header,,,,0,,,,40,9,,0,7;,7,,0,7,,0,46.8643,0,,,,,,,,,1,10,0,,10,,50,50,?offline=disabled,,BeginRequest=2015-03-02T16:36:50.049Z;CorrelationID=<empty>;ProxyState-Run=None;ServerLocatorRefresh=beebf732-0f99-47a0-9f36-d266573f1510;RefreshingCacheEntry=CacheEntry(BackEndServer
    <Exchange2007ServerName>.ourdomain.com~1912832083|ResourceForest |LastRefreshTime 2015-03-02T16:01:29.3265514Z|IsSourceCachedData False);ProxyState-Complete=CalculateBackEnd;EndRequest=2015-03-02T16:36:50.096Z;I32:ADS.C[<DC_Name>]=1;F:ADS.AL[<DC_Name>]=6.6401;I32:ATE.C[<DC_Name>.ourdomain.com]=1;F:ATE.AL[<DC_Name>.ourdomain.com]=0,HttpProxyException=Microsoft.Exchange.HttpProxy.HttpProxyException:
    The server <Exchange2013ServerName>.ourdomain.com was not found in the topology. ---> Microsoft.Exchange.Data.Storage.ServerNotFoundException: The server <Exchange2013ServerName>.ourdomain.com was not found in the topology.   
    at Microsoft.Exchange.Data.Storage.ServiceTopology.GetSite(String serverFullyQualifiedDomainName)    at Microsoft.Exchange.Data.ApplicationLogic.Cafe.HttpProxyBackEndHelper.GetServiceTopologyWithSites(String serverFqdn  ServiceTopology
    topology)    at Microsoft.Exchange.Data.ApplicationLogic.Cafe.HttpProxyBackEndHelper.GetE12ExternalUrl[ServiceType](BackEndServer mailboxServer)    at Microsoft.Exchange.HttpProxy.OwaProxyRequestHandler.GetE12TargetServer(BackEndServer
    mailboxServer)    at Microsoft.Exchange.HttpProxy.BEServerCookieProxyRequestHandler`1.GetDownLevelClientAccessServer(AnchorMailbox anchorMailbox  BackEndServer mailboxServer)    at Microsoft.Exchange.HttpProxy.LatencyTracker.GetLatency[T](Func`1
    operationToTrack  Int64& latency)    at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.InternalOnCalculateTargetBackEndCompleted(TargetCalculationCallbackBeacon beacon)    at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.<>c__DisplayClass3b.<OnCalculateTargetBackEndCompleted>b__3a()   
    --- End of inner exception stack trace ---;
    Hoping that somebody can help ?
    Thanks

    Hi Ansev,
    Thank you for your question.
    By my testing, user who was migrated to Exchange 2013 cannot access mailbox on Exchange 2007 with 500 error, although user account have “Full Access Permission” to mailbox on Exchange 2007.
    I suggest we migrate account which has “Full Access Permission” for other user  to Exchange 2013.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • HTTP 500 Error while login.

    Hi Friends,
    I have fresh installed R121.1 on 2003 server. just after instalation i checked my application was working fine.
    then i shut down my application using adstapal.cmd and did one reboot.
    Post reboot i started my DB with it's listner after this as expected DB is working fine. and then started all the services with adstrtal.cmd
    Every services are started.
    When i was trying to login to application i an getting HTTP 500 Error Below is my steps and services status.
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>adstrtal.cmd apps/apps
    ECHO is off.
    ECHO is off.
    Thu 11/11/2010 10:21 PM
    ECHO is off.
    ECHO is off.
    Connected.
    The logfile for this session is located at D:\oracle\VIS\inst\apps\VIS_ora\logs\
    appl\admin\log\adstrtal.txt
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adopmnctl.cmd start
    script returned:
    Thu 11/11/2010 10:21 PM
    Starting Oracle Process Manager (OPMN) ...
    CALL D:\oracle\VIS\apps\tech_st\10.1.3\opmn\bin\opmnctl.exe start
    opmnctl: opmn started
            STATE              : 4  RUNNING
    exiting with status 0
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adalnctl.cmd start
    script returned:
    ECHO is off.
    ECHO is off.
    Thu 11/11/2010 10:23 PM
    ECHO is off.
    The environment settings are as follows ...
    ECHO is off.
           ORACLE_HOME : D:\oracle\VIS\apps\tech_st\10.1.2
                 LOCAL : VIS
            ORACLE_SID :
                  PATH : D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\te
    ch_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre
    \bin;D:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\apps_st\ap
    pl\fnd\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\VIS\ap
    ps\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\perl\5.
    8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\apps\apps_st\comn\util\unzip\unz
    ip;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st
    \10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\app
    s\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\o
    racle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3
    \bin;D:\oracle\VIS\apps\apps_st\appl\cz\12.0.0\bin;D:\oracle\VIS\apps\apps_st\ap
    pl\iby\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\pon\12.0.0\bin;D:\oracle\VIS\a
    pps\apps_st\appl\au\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\V
    IS\apps\apps_st\appl\cz\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\iby\12.0.0\bi
    n;D:\oracle\VIS\apps\apps_st\appl\pon\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl
    \au\12.0.0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_st\
    10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps
    \tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\
    jre\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_st\10.1.3\
    appsutil\jdk\bin;D:\oracle\VIS\apps\tech_st\10.1.3\bin;D:\oracle\VIS\apps\tech_s
    t\10.1.3\appsutil\jdk\bin;C:\Dot_Net_VC\Common7\IDE;C:\Dot_Net_VC\VC\BIN;C:\Dot_
    Net_VC\Common7\Tools;C:\Dot_Net_VC\Common7\Tools\bin;C:\Dot_Net_VC\VC\PlatformSD
    K\bin;C:\Dot_Net_VC\SDK\v2.0\bin;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C
    :\Dot_Net_VC\VC\VCPackages;D:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;D:\orac
    le\VIS\apps\apps_st\appl\fnd\12.0.0\bin;D:\oracle\VIS\apps\apps_st\appl\ad\12.0.
    0\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\VIS\apps\
    tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\VIS\apps\apps_
    st\comn\util\unzip\unzip;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\o
    racle\VIS\apps\tech_st\10.1.2\bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk
    \bin;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\Dir\bin;C:\WINDOW
    S;C:\WINDOWS\system32;D:\oracle\VIS\apps\tech_st\10.1.3\ant\bin;D:\oracle\VIS\ap
    ps\tech_st\10.1.3\ant\bin
       LD_LIBRARY_PATH : D:\oracle\VIS\apps\tech_st\10.1.2\lib
    ECHO is off.
    The service "OracleVIS_ora_TOOLSTNSListenerAPPS_VIS" is already started
    adalnctl.cmd exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adapcctl.cmd start
    script returned:
    Thu 11/11/2010 10:23 PM
    Oracle Managed Process HTTP_Server is already running
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adoacorectl.cmd start
    script returned:
    Thu 11/11/2010 10:23 PM
    Oracle Managed Process oacore is already running
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adformsctl.cmd start
    script returned:
    Thu 11/11/2010 10:23 PM
    Oracle Managed Process forms is already running
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adoafmctl.cmd start
    script returned:
    Thu 11/11/2010 10:23 PM
    Oracle Managed Process oafm is already running
    exiting with status 2
    ERRORCODE = 2 ERRORCODE_END
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\adcmctl.cmd start
    script returned:
    ECHO is off.
    ECHO is off.
    Thu 11/11/2010 10:23 PM
    ECHO is off.
    ECHO is off.
    Thu 11/11/2010 10:23 PM
    ECHO is off.
    ECHO is off.
    Setting environment for using Microsoft Visual Studio 2005 x86 tools.
    APPSORA.cmd exiting with status 0
    Starting concurrent manager for VIS ...
    The OracleConcMgrVIS_ora service is starting...
    The OracleConcMgrVIS_ora service was started successfully.
    adcmctl.cmd exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts\jtffmctl.cmd start
    script returned:
    You are running jtffmctl.cmd
    Thu 11/11/2010
    10:23 PM
    "Starting Fulfillment Server for "VIS" on port "9300" ...\n"
    The Oracle Fulfillment Server VIS_ora service is starting.
    The Oracle Fulfillment Server VIS_ora service was started successfully.
    jtffmctl.cmd exiting with status 0
    ERRORCODE = 0  ERRORCODE_END
    .end std out.
    .end err out.
    All enabled services for this node are started.
    Check logfile D:\oracle\VIS\inst\apps\VIS_ora\logs\appl\admin\log\adstrtal.txt f
    or details
    adstrtal.cmd exiting with status 0
    ERRORCODE = 0 ERRORCODE_END
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>adapcctl.cmd status
    Thu 11/11/2010 10:28 PM
    Checking status of OPMN managed processes...
    Processes in Instance: VIS_ora.ora.apps.com
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:oafm          |    7980 | Alive
    OC4JGroup:default_group          | OC4J:forms         |    1936 | Alive
    OC4JGroup:default_group          | OC4J:oacore        |    7884 | Alive
    HTTP_Server                      | HTTP_Server        |    7828 | Alive
    ASG                              | ASG                |     N/A | Down
    exiting with status 0
    ERRORCODE = 0 ERRORCODE_END
    D:\oracle\VIS\inst\apps\VIS_ora\admin\scripts>At the botom i have given status of adapcctl.cmd as well
    Please Suggest
    Bachan.

    Hi,
    [Fri Nov 12 13:22:04 2010] [error] [client 192.168.100.1] [ecid: 1289596924:192.168.100.1:3020:2668:1,0] Directory index forbidden by rule: c:/oracle/vis/apps/apps_st/comn/java/classes/
    [Fri Nov 12 04:08:42 2010] [error] [client 192.168.100.1] [ecid: 1289563722:192.168.100.5:3528:3312:2,0] File does not exist: c:/oracle/vis/inst/apps/vis_ora/portal/favicon.icoThese errors can be ignored.
    And Data base is running perfectly fine.
    I can query, compile n can do any thing on DB.Have you check the log file for any ORA-XXXXX errors?
    i am able to login and after few min it went to same status HTTP 500 Internal server errorAre you still above to access the forms? Is the issue with HTTP server only?
    Thanks,
    Hussein

  • HTTP 500 Error while using XML HTTP Port for idoc

    Hi,
    I am trying to send CRM idocs via XML Http instead of usual t-rfc.
    After standard idoc - pi configs i get the below error.
    transferring the IDoc by HTTP, the return code with the message '500Error during parsing of SOAP header' has occurred.
    In BD87 I get the below error.
    The target address was: http://yyyyyy.XXX.local:800X/sap/xi/engine?type=entry
    I get the http 500 error as:-
    Check whether the IDoc can be sent again.
    It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards
    Any idea on how to trouble shoot or resolve this.
    Regards,
    Anirban

    Hi Anirban,
      Follow the below links for troubleshooting.
    Troubleshooting  File-to-IDOC Scenario in XI.
    The specified item was not found.
    Regards,
    Leela

  • HTTP 500 error when opening "App Server Control" (EM) in OAS 10.1.3.5.0

    Hi,
    I have some (but not much) experience with OAS and am currently stuck. So hope to find someone who can help me further here.
    When i open Oracle Application Server Control from the SOA Suite 10.1.3.5.0 home page i get most of the times an HTTP 500 error.
    Initially i got this even when i opened the login page (/em) but worked around this by increasing the ThreadsPerChild from 100 > 250 in the httpd.conf and replacing the loopback adres 127.0.0.1 in the dms.conf for the virtual host configuration to the actual (fixed) ip-address.
    The current situation is that when i restart the environment (opmn stopall & opmn startall) i can open the the EM login page.
    After logging in om the Enterprise Manager, the page is partly loaded and a HTTP 500 error is shown when i refresh the page.
    The apache log files now still shows the following errors;
    [Tue Sep 07 15:46:19 2010] [error] [client 10.157.1.68] [ecid: 1283867060:10.150.50.110:10312:9568:5,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://ascontrol (no island or jgroup).
    [Tue Sep 07 15:51:20 2010] [error] [client 10.157.1.68] [ecid: 1283867060:10.150.50.110:10312:9568:5,0] mod_oc4j: request to OC4J SOA-WTST:12501 failed: Connect failed
    Any hints ?
    Kind regards,
    Peter

    If finally found the cause of the problem, lack of PermGen space for the home instance;
    When opening the EM Console most of the times i was able to open the login page, under stress opening this page failed most of the times.
    The ascontrol-application.log pointed me in the right direction;
    10/09/07 15:26:59.111 ascontrol: Servlet error
    java.lang.OutOfMemoryError: PermGen space
    When monitoring the PermGen of the home instance, is showed that the system was running out of PermGen space.
    Increasing the PermGen size for the home instance in opmn.xml did the trick
    <data id="java-options" value="-Xrs -server -XX:MaxPermSize=128M......"

Maybe you are looking for

  • ITunes 8.0.2.20 Won't Install

    I had iTunes running without problems. Was notified there was an update (8.0.2.20). Took it, it installed, after that, was never able to run iTunes again. I got an error message (can't remember message number now) that a component was missing. Tried

  • FTP command in shell script

    Hello All, I would like to transfer a file from one system to another system. so i haven written shell script with ftp command as follows. ftp -i 10.14.12.1<< END cd C:\Temp put $datafile ascii quit But i am getting error. Please let me know the sysn

  • Converting ECC to 4.6c version

    Hi friends,     I have a requirement where we need to downgrade the smartform which is in ECC5.0 into 4.6 version. I was trying to do it manually by looking at the ECC one but I find quite a few things which are different. Most imp thing is the table

  • Lost MIDI Input since I Downloaded New Version of MAC OS X 10.4.7

    I have an Oxygen 8 MIDI I lost the sound on my MIDI after I down loaded, I tried to reinstall the drivers but they are only for MAC OS X 10.4.6, any ideas? I have no sound even in the audio test set up. iMac 20" 2 Ghz Intel Core Duo   Mac OS X (10.4.

  • HT201209 I have entered my code #s as directed and it does not allow to accept it.

    Hello:  I've entered code #  and it will not accept <Personal Information Edited by Host>