HTTP/1.1 200 OK Server: Microsoft-IIS/7.5 Connection: close in Sharepoint 2010

Hi to all,
           This is siddiqali working on sahrepoint 2010.I open my Web application then i got error as
HTTP/1.1 200 OK
Server: Microsoft-IIS/7.5
Connection: close
       Can any one help me hoe to solve it
Thanks, Quality Communication Provides Quality Work. Mohammad Siddiqali.

Hi Matthew ,
                Thanks for responding .I have reattached the data base but getting trouble shoot as
The Workstation service has not been started.
."Can you tell me why it is showing.
Thanks, Quality Communication Provides Quality Work. Mohammad Siddiqali.

Similar Messages

  • "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint 2010 and Publishing Approval workflow.

    I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
    2010 and  Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
    Versioning Settings.
    Error
    This is quiet urgent issue . Any help would be really helpful.. Thanks.. 

    Hi Marlene,
    Thank you very much for your suggestions.
    But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
    As it works in other environment, I tried figuring out the possible differences which can lead to this error.
    Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
    Regards,
    Vineeth

  • Microsoft Word Hangs When Opening Document From SharePoint 2010 Document Library

    I am running into an issue where Word hangs when opening certain files from a document library.  When the issue occurs, Word opens and hangs at the Downloading <Doc URL> stage.  I have tried disabling the SharePoint plugins in IE and that
    makes no difference.  I can download a local copy of the file and open in just fine.  The file in questions exists in a separate document library where it can be opened just fine (The file was copied to the library where the issue is occurring by
    a Workflow).  The issue also has only occurred on .docx files and not .doc, however, not all docx files are having the issue.
    Does anyone have any thoughts on what might be causing this?
    Thanks.

    Hi,
    According to your post, my understanding is that when you opened a certain files from a document library, it hanged at the downloading stage.
    I tried to reproduce the issue, after coping by a workflow, the .docx files opened well in my environment.
    Did the issue occur in other documents libraries? You can copy the files to a new documents library by workflow, then check whether it works.
    For more details we also can check the SharePoint ULS logs.
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
    Have you check your IE settings (Tools->options->connections->LAN settings->uncheck Automatically detect settings).
    Please also use fidder tools to detect the process. You can download it by the following link.
    http://fiddler2.com/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Store sharepoint 2010 list data in sql server

    Hi,
    I want to store sharepoint list data to sql server database.
    SO can anyone guide how can i attach my sharepoint 2010 with sql server 2008.
    Please help to solve the issue.
    Thanks in advance.
    Regards
    Rajni

    Hi,
    The screenshot indicates that SharePoint Designer is crashing when trying to add new External Content Type.
    Remove the SharePoint Designer and reinstall it to check the result.
    Microsoft Business Connectivity Services (BCS) enables users to read and write data from external systems—through Web services, databases, and Microsoft .NET Framework assemblies—from within Microsoft SharePoint 2010 and Microsoft Office
    2010 applications.
    There are lots of blog articles showing how to configure BCS in SharePoint 2010. You can start from:
    Understanding Business Connectivity Services
    http://blogs.msdn.com/b/sharepointdev/archive/2011/12/26/understanding-business-connectivity-services.aspx
    Using Business Connectivity Services in SharePoint 2010
    http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Can SharePoint 2010 read data from an external SQL Server 2012 data Source?

    Hi,
     I would like to Know whether SharePoint can read the data from a SQL server 2012 external data source?
    I am not talking about SharePoint internal database. I need to get the data from an sql database which is used by some other application. For My SharePoint server I am using SQL 2008 R2 as an internal database engine. But I need to get some other data from
    another data Source which is configured in SQL server 2012.  Can any one help me on this whether is there any problem on accessing the data from SQL 2012. If there is no problem for that, please provide me the version of SQL data source compatible with
    SharePoint 2010 and SP 2010 sp1. 
    Thanks!
    Regards,
    Henoy 

    Hi Romeo ,
    I have already visited this page. But there is no answer for my question. I just want to know whether we
    can done the same from a SQL 2012 server.
    Please help me to know whether SharePoint 2010 is Compatible to get the data from SQL 2012 external data source.
    Thanks for your instant reply.
    Regards,
    Henoy TM.
    +919035752610

  • Installing and Configuring Microsoft IIS plugin for weblogic server

    Hi guys,
    I want to navigate from "a page in website hosted on IIS" to "a page in application hosted on weblogic". I found out that there is a plugin for Microsoft IIS that can proxy requests to weblogic server. The documentation of the plugin can be found on the following address:
    Webserver plugin
    I want to know about the configuration of machines. Can IIS and weblogic be on the same machine or different machines????  Where i have to install the plugin????
    I am not able to find this in the above documentation.
    My environment is:
    1) Weblogic Server 10.3.5 installed on windows server 2012.
    2) Forms and Reports 11gR2 are installed on this weblogic server
    3) Apex Listener is also installed on the weblogic which communicates with a different db server.
    4) I also want to install JDeveloper and ADF on the same weblogic server and call applications developed in ADF (like jsp page) from Microsoft IIS website.
    Please help me and give me suggestions.
    Regards,
    Waqas

    There is a free ebook here:
    http://www.microsoft.com/en-us/download/details.aspx?id=30384
    It's also the title of a section of technet but that's not available in printed format as far as i know.
    http://technet.microsoft.com/en-us/library/cc262957.aspx

  • Microsoft IIS as a re-direct in front of a Weblogic app server hosting ADF?

    Has anyone had tried to set up Microsoft IIS as a re-direct in front of a WebLogic app server hosting ADF?
    Can you please share the best practices, config params, etc?
    Thanks and regards
    Anil

    Any suggestions in this regard?

  • Cannot connect to DI Server from IIS

    Hi,
    I have a working installation of IIS and DI server on my laptop (running XP SP1). On my laptop, I can make SOAP calls to the DI Server from .asp pages running on the IIS.
    However, I installed the DI server on a Windows 2003 Server with IIS 6 and tried to use the same configurations. Now, I cannot get any connection to the DI Server. The DI Server log only displays information about the start and stop events (on my laptop, each SOAP request is recorded in the log). I examined the IIS log file and this is what I found:
    2005-01-12 12:46:13 127.0.0.1 GET /default.htm - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 200 0 0
    2005-01-12 12:46:24 127.0.0.1 POST /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:21 10.169.32.4 OPTIONS / - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 200 0 0
    2005-01-12 12:47:21 10.169.32.4 PROPFIND /Data - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 501 0 0
    2005-01-12 12:47:21 10.169.32.4 PROPFIND /fijhsk00$ - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 501 0 0
    2005-01-12 12:47:50 127.0.0.1 POST /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:53 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:47:53 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:50:23 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:50:25 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:50:25 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    2005-01-12 12:50:26 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
    = = =
    It seems obvious that something is wrong with WebSAPManageSoap.asp. However, the same file works fine on my laptop installation. Has anyone got experience or insights about this problem ?
    Henry

    Hello
    I tried as Henry to do the same thing but I got a different error :
    the log file of IIS is :
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2005-01-27 15:47:27
    #Fields: date time s-sitename s-computername s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs-version cs(User-Agent) cs(Cookie) cs(Referer) cs-host sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken
    2005-01-27 15:47:27 W3SVC1 SRV-DEV 192.168.2.120 POST /WebSAPManageSoap.asp - 80 - 62.39.108.237 HTTP/1.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.1;SV1;.NETCLR1.1.4322) - - 62.39.108.237 200 0 0 660 1571 3562
    and the SOAP response is :
      <?xml version="1.0" ?>
    - <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
    - <env:Body>
    - <env:Fault>
    - <env:Code>
      <env:Value>env:Receiver</env:Value>
    - <env:Subcode>
      <env:Value>-114</env:Value>
      </env:Subcode>
      </env:Code>
    - <env:Reason>
      <env:Text xml:lang="en">No Server Defined</env:Text>
      </env:Reason>
    - <env:Detail>
      <Command>Login</Command>
      </env:Detail>
      </env:Fault>
      </env:Body>
      </env:Envelope>
    The SOAP request is :
    <?xml version="1.0" encoding="utf-16"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
      <soap:Body>
        <Login xmlns="http://localhost/WebSAPManageSoap.asp">
          <DataBaseServer>localhost</DataBaseServer>
          <DataBaseName>SBODemo_US</DataBaseName>
          <DataBaseType>dst_MSSQL</DataBaseType>
          <DataBaseUserName>sa</DataBaseUserName>
          <DataBasePassword>123erty</DataBasePassword>
          <CompanyUserName>manager</CompanyUserName>
          <CompanyPassword>manager</CompanyPassword>
          <Language>ln_English</Language>
          <LicenseServer>srv-dev</LicenseServer>
        </Login>
      </soap:Body>
    </soap:Envelope>
    On the same host I've installed DI SERVER, SBO and IIS and run the license server.
    About this issue, I've created a message on the SAP Market place.
    But if you have an idea...
    Thanks
    Jerome

  • Relative Links and Microsoft  IIS not working, why?

    I've searched high and low for the solution to this problem
    and no one seems to give a definite answer.
    I have a typical home server set up using Microsoft IIS on
    Windows 2000 as a test server for websites.
    The typical folder structure of the IIS is Inetpub >
    wwwroot > content
    Since I am working on multiple websites at a single time I
    place my websites as such Inetpub > wwwroot > websiteFolder1
    with multiple websites under wwwroot
    Now I setup the dreamweaver sites with the root directory as
    websiteFolder1 but when I go to use relative links, dreamweaver is
    looking at the wwwroot level instead and the relative links won't
    work. So incase that seems hard to understand when I have a css
    file that is in Inetpub > wwwroot > websiteFolder1 >
    library and I want to relatively link to it, dreamweaver is instead
    of seeing websiteFolder1 as the main, it is starting with wwwroot
    and that makes the file not found.
    How do I get the relative links to see the folder under
    wwwroot as the root directory instead of wwwroot?
    Thanks Much!

    You would have to set up virtual sites in your IIS
    installation. Google
    that term, and I'm sure you will find lots....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Visionology" <[email protected]> wrote in
    message
    news:ee18ce$jej$[email protected]..
    > I've searched high and low for the solution to this
    problem and no one
    > seems to
    > give a definite answer.
    >
    > I have a typical home server set up using Microsoft IIS
    on Windows 2000 as
    > a
    > test server for websites.
    >
    > The typical folder structure of the IIS is Inetpub >
    wwwroot > content
    > Since I am working on multiple websites at a single time
    I place my
    > websites
    > as such Inetpub > wwwroot > websiteFolder1 with
    multiple websites under
    > wwwroot
    >
    > Now I setup the dreamweaver sites with the root
    directory as
    > websiteFolder1
    > but when I go to use relative links, dreamweaver is
    looking at the wwwroot
    > level instead and the relative links won't work. So
    incase that seems
    > hard to
    > understand when I have a css file that is in Inetpub
    > wwwroot >
    > websiteFolder1 > library and I want to relatively
    link to it, dreamweaver
    > is
    > instead of seeing websiteFolder1 as the main, it is
    starting with wwwroot
    > and
    > that makes the file not found.
    >
    > How do I get the relative links to see the folder under
    wwwroot as the
    > root
    > directory instead of wwwroot?
    >
    > Thanks Much!
    >

  • Error sending DAV request. HTTP code 500, status 'Internal Server Error'

    Hi All,
    I am getting the error On SCCM R2 Environment .. on the client machine we are getting the below issue and software center 
    is not showing any information..
    While checking on the client's DatatransferService.log.. i am getting the below issues..
    Successfully sent location services HTTP failure message.
    Error sending DAV request. HTTP code 500, status 'Internal Server Error'
    GetDirectoryList_HTTP('http://MachineName:80/SMS_DP_SMSPKG$/7ea0b105-5592-48cd-8b8e-81777537c34f') failed with code 0x87d0027e.
    i realize it because of Isapi filter issues.. can any one guide me to resolve the issues..
    KJSUBBU

    Hi,
    In addition, I recommend you check whether you have additional Authentication methods (like ASP.NET Impersonation) enabled. 
    Disable the authentication method and try again.
    Also, please review the link below, here is a article about troubleshoot ISAPI filter issue.
    Error message when you visit a Web site that is hosted on IIS 7.0: "HTTP Error 500.0 – Internal Server Error"
    http://support.microsoft.com/kb/942031
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to install Apex on small business server with IIS already installed?

    I am building an Oracle Application Express application for a small not-for-profit and they only have a single small business server that is already running the microsoft IIS server. Can I install the Oracle Http server and run both the Oracle and IIS on the same mahine?

    Can I install the Oracle Http server and run both the Oracle and IIS on the same mahine?Absolutely. I'm running Oracle HTTP Server, Tomcat, and IIS on my laptop. Just make sure you don't have port conflicts and you should be problem free.
    - Mark

  • Flash FLV and Microsoft IIS Bug?

    I have run into a problem that may be a real problem for
    anyone relying on SWF files playing FLV files from Microsoft IIS
    servers. I have used this method of playing videos on a few of my
    clients sites and as of the last week or so these videos stopped
    playing! I know nothing changed with the videos so I was not sure
    what happend. As a spent countless hours trouble shooting this
    problem, I found that if I took the .SWF and FLV files off the
    server they were on and moved them to another server (non
    microsoft) they magically work again. At first I thought my hosting
    company had a problem with their IIS server but I checked three
    other servers (IIS) and they all have the same problem (all
    patched). Now I know these files played on all these servers in the
    last week or so. I even went as far as to check these file against
    a computer running XP with IIS turned on and running and the SWF
    file loads but will not play the FLV video. I even downloaded
    "flvplayer" to check this theory to make sure I didnt do something
    stupid with my SWF file. It appears that all my computers that have
    been patched using microsoft's update program over the last week or
    so are now broken. Is there anyone out there that can check my
    theory?

    Maybe the settings got deleted during the patch. Follow these
    directions and see if they work again:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_19439&extid=tn_19 439&dialogID=185014411&iterationID=1&sessionID=9630f39ccb3510656d78&stateID=0+0+37458677&m ode=simple
    Good luck.

  • Deploy Servelts on Microsoft IIS ?

    Hi,
    I have a Web Based solution using J2EE architecture. Now we have a need to use a Microsoft IIS as the WebSever for it. So basically we need to deploy Servlets on Microsoft IIS to use IIS as a web server.
    Any ideas or suggestion about how to implement it ?
    Thanks in advance.
    Mangesh

    Yeah I have just been doing that. You can get jakarta-tomcat for your servlet container (its free), use the isapi_redirect.dll to redirect servlet calls to tomcat. Complete information can be found at http://jakarta/.apache.org Choose tomcat from this webpage and look at documentation. A specific section on IIS exists in the documentation.

  • File locking with OSX Server & Microsoft Word

    We have a small office LAN based on a Airport Extreme bases station. Periodically Microsoft Word reports a break in connection to the shared folder where we store documents to get disconnected. When that happens and the user reconnects to the share, the user gets the file read-only message for the Word document that was open at the time.
    I have found that in order to clear the read-only flag, I have to restart the server and open the Word file on the server with the ID of the user who was editing the file on the remote computer. Only that seems to clear the file locking that causes the file to be read-only.
    I cannot figure out a less drastic way to release the lock file. I don't see any hidden temp files in the same folder as the document that is locked for editing found by ls -a or in the root direction of the shared folder in the .TemporaryItems/folders.<UID> that seems to be holding the lock.
    I have run chflags nouchg <Word file> from Terminal, but that seems to have no effect either. I also used xattr to see if there were any locks held that way, but I don't see anything that way either.
    File sharing to Macs only, which are configured just to use AFP through OSX Server.
    Does anyone understand how the file locks of Word documents can be released directly with out restarting the server?
    I should add that the underlying problems seems to be WiFi related. The behavior is that the WiFi connection seems to break long enough that the shared volumes disconnects. Outlook also causes a break. This behavior seems to have started with 10.9 and the purchase of new Retina Display MacBook Pros. I turned off AppNap on the Office applications but that is not clearly helpful. I also have been told the problem seems more likely to occur when Word is open in the background and another program like Outlook is in the foreground.
    Any suggestions appreciated.

    Apple write an operating system and also produce file sharing software as part of that to be used as a file server. Apple provide documentation for third-party software developers on how they should write software to work with Apple's software and also give those developers early access to new versions so those third-party developers can test and if needed make adjustments and issue updates to cope with any Apple changes.
    Some third-party developers are good at dealing with this, some are bad, and some totally ignore what Apple does and give the impression they don't care if their product works properly or not. I think we can all judge where Microsoft sits.
    It appears Microsoft have never paid any attention in particular to how Apple expect file-locking to be handled when accessing files on a Mac server. There have been problems for years and years and years with Office. Two other problems I have seen which seem different to yours but probably related are -
    With Office documents it is supposed to be possible for more than one person to edit the same file at the same time, consider it a miracle if this actually works
    With Office in particular Word, there is an auto-save function, unfortunately the way this seems to be implemented it seems that Word creates a new temporary file each time it auto-saves the document and keeps all the previous temporary files open still, this eventually means potentially over a hundred temporary files are open - just for one Word document and you can then hit a limit on the total number of files you are allowed to have open at the same time. At this point further auto-saves fail, and you also encounter great difficulty doing a real full save of the document.
    I do not hold Apple completely blameless over this issue, it is likely their file-locking implementations change too often, and have inadequate documentation, however even considering this a company the size of Microsoft with the amount of sales (and profit) they derive from Office for the Mac has no excuses at all for failing to put the effort in to resolve any such clearly critical problems.
    We could go on and on about other areas where Microsoft don't play by the (software) rules. Even in Windows Office does not obey the standard print dialog rules Microsoft specified themselves!
    Unfortunately not only is Office for Mac upgraded infrequently, but even when new paid for upgrades are released Microsoft have a history of still not fixing bugs. It goes without saying that a mere free update is even less likely to actually fix a bug, typically such free updates only address security issues. The next version of Office is going to be Office for Mac 2014 see http://www.macworld.com/article/2106643/microsoft-will-release-a-new-version-of- office-for-mac-this-year.html
    One area I confidently predict Microsoft not to resolve in Office for Mac 2014 is that fact that Word for Mac still does not support right-to-left languages like Hebrew and Arabic. This is despite the fact that OS X itself has supported this for years and years, and despite the fact other Mac programs support this including the free TextEdit and Pages - both of which can read Word files. Some people may remember that at one point the Israeli Government temporarily banned all Microsoft software over this issue. See http://apple-beta.slashdot.org/story/03/10/15/2215249/israeli-government-suspend s-microsoft-contracts This issue goes back over TEN years!!
    I note that Microsoft has now taken their OfficeForMac blog offline, probably due to the weight of criticisms. I would not say it is due to out-right anti-Microsoft hate, that war ended long ago. We just want products that work. I myself do use Microsoft products, even at home - where they are the best solution, so I use Microsoft Media Center for example. Sadly this is now being neglected by Microsoft.

  • Implementing SSO using Microsoft IIS with OBIEE 10.1.3.3.2

    We are running OBIEE 10.1.3.3.2 on Windows 2003 server and want to impement Single-Sign-On (SSO) using Microsoft IIS. We set up the SSO according to chapter #8 of the deployment guide but it doesn't work :when opening the web login pages of the OBI application it still ask the user for authentication.
    Also, according to the installation guide the SSO feature is deployed when chosing "Advanced installation type" during the installation. This advanced installation type requires the Oracle Application server. We have not installed Oracle Application server in our environment, and we chose "Basic" installation.
    Is the SSO functionality available without Oracle Application server? What are the steps to setup SSO in our environment?

    Hi,
    I'm experiencing the same issue with IIS. Did you find any resolution in the meanwhile?
    Please let me know...
    Thanks a lot,
    GL

Maybe you are looking for

  • How to replace a line ina text file using java?

    Hi ALL, Does anybody know how to replace a line in a text file uisng java.

  • V$bh and flush cache

    I issued alter system to flush cache (shared_pool, buffer_cache) after the command I ran a query against v$bg and those objects are still there ..... should't the just "vanished" from the view after I flush the cache ? thanks S.

  • SAP Exit Variables changes using FM RREX_VARIABLE_EXIT

    Hi BW Group:             I am trying to made some modifications on Dates fields and for that I created variables as SAP Exit. In the code of the standard FM RREX_VARIABLE_EXIT appear a part to include the code for the new variables as RSVAREXIT_XXX_Y

  • Materalized View takes FOREVER TO TRUNCATE

    We are on oracle 11g rac and doing a complete refresh on a materialized view with 38 million records. For some reason, the truncate takes too long. its been nearly 4 hours. below is what i am seeing in v$sql view. Any ideas would be helpful. Also, we

  • Just purcashed more memory.  adobe will not open.

    just purchased memory   adobe is not opening.