HTTP/1.1 connection problems

Hello
We have a Sun ONE Application Server 7 installed in production environment. Certain past time, we observed that this server leave off accepting HTTP 1.1 requests although continues answering HTTP 1.0 requests. The load of the server is inferior to a request per second.
Somebody would know what can be happening?
Thank you very much. jbroma77

Anybody have any ideas about this?. Has Sun ONE applicattion server 7 any system protection for avoiding denial of service?
Thanks in advance.

Similar Messages

Using JNDI Context with HTTP Tunneling (Detecting Connection Problems)

Hi there,
We are using connection to WL 5.1.0,SP6 cluster to create JNDI Context. Everything works fine until tcp/ip timeouts occur.
After that ...
Is there a way to subscribe for connection events?
I don't want to use T3CLient for this, since WL advises not
to do that. The recommended method is to create a Context and
work with it.
Help.
For the curious here is one exception which we can not even
trap. Is this fixed in SP8?:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ MBuf used after writeTo() called ]
     at weblogic.socket.MBuf.checkNotWritten(MBuf.java:68)
     at weblogic.socket.MBuf.writeTo(MBuf.java:140)
     at weblogic.socket.JVMSocketHTTPClient.sendMsg(JVMSocketHTTPClient.java:253)
     at weblogic.socket.JVMAbbrevSocket.sendOutMsg(JVMAbbrevSocket.java:348)
     at weblogic.socket.JVMAbbrevSocket.sendMsg(JVMAbbrevSocket.java:237)
     at weblogic.rjvm.ConnectionManager.sendMsg(ConnectionManager.java:420)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:494)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSendRaw(MsgAbbrevOutputStream.java:155)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:163)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:186)
     at weblogic.rmi.internal.BasicOutgoingRequest.sendRecv(BasicOutgoingRequest.java:23)
     at weblogic.rmi.extensions.AbstractRequest.sendReceive(AbstractRequest.java:73)
     at

Download Firmware 2.77 MB...
TFTP Download , download both the files on the desktop only...
Double click the TFTP.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https but in home wi-fi it connects to all all http and https sites. How fix this problem as I am new this

HI i have macbook pro with OSX 10.8. I am facing typical problem with Wi- Fi , in school wi-fi it does'nt connects to http sites and connects only https as no security/proxy settings done but in home wi-fi it connects to all http and https sites. How to fix this problem as I am new this operating system. Please any one help me in this as I have installed Delicious Library which is not working in school becoz it searches amzon http site.

I would imagine that at school, you're required to connect through an HTTP proxy.
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. Enter the proxy settings given to you by the network administrator. Click OK and then Apply.
You may wish to create separate network locations for home and school. See the built-in help for instructions.

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Local Network Connection Problem with SQL Server 2008 R2

Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?

Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Network.http.max-persistent-connections-per-server keeps reverting to user set 4

I didn't used to have this problem as far as I'm aware, but as of recently, I've noticed that if I try to download more than 4 of one thing at a time from the same site, it would fail. For instance, if I have up 5 web pages of streaming content, only 4 will load, the other 5th one will do nothing until I finish one of the others. Upon looking up some information on this, I saw that the network.http.max-persistent-connections-per-server is set at "user set = 4", and if I change that number to anything else, it corresponds. If I click to 'reset' the number, it goes to the default of 6 - which is still less than what it used to be. I used to not even have a limit on this as far as I'm aware, or if I did, it was well beyond 10 and that wasn't a product of me manipulating it.
What I'm asking is this:
1) How do I make this so it permanently switches to a higher number? Every time I reset it to 6 or I manually change the number to something higher, once I close it, those settings go back to 4.
2) Why is it reverting and not staying the way I change it?
3) What's the purpose of this and why is it just recently doing it when I haven't put any new add-ons or made any other refinements to Firefox that I'm aware of?
Any help would be appreciated

Two possible causes for it resetting to 4 that I can think of.
# You have an add-on handing that pref and that is resetting it to 4 when Firefox is restarted.
# That pref is set via user.js and that causes it to go to that value as Firefox starts.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes 
http://kb.mozillazine.org/User.js_file

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

IPad 2 Wi-fi connection problems

I am lately encountering this problem with my internet wi-fi connection. It keeps dropping the signal. When I go to Settings to re-connect, it demands the password everytime. After entering the password, every single time there is the message: "Failure to connect" and on the second re-try it works. When I come home after work, the iPad does not automatically connects to the wi-fi. I have to connect it myself everyday then enter the password again and again.
After the connection, I can use my apps that require the internet (until the signal drops again) but there are no notifications from my apps. At the same time, I connected to the 3G internet and all my notifications appeared which were supposed to appear when I connected to the wi-fi. I have the iPad on recharge every night. The next morning when I check my notifications, most of them appeared at the same time (when the wi-fi was working fine). For example, I had a game update that such and such thing is ready 46 minutes ago when it should have been 3 hours before.
Someone suggested to try the "Forget this network" but there is no improvement.
To fix this, I have tried to restart the iPad. I have reset the network settings. Nothing helps
In short,
1) I have to enter password every time I connect
2) Signal keeps dropping
3) The notifications don't appear all the time from the internet apps. The real time notifications come intermittently or when I connect to 3G, they come instantly.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HTTP response error :Connection reset

Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj Dwivedi

Hi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

PI to MDM Connection Problem.

Hi Experts;
I have a connection Problem. I Sent data from r3 to PI System.PI System Convert Idoc to xml and sent to mdm server but PI cannot connect to mdm server. I Controled my connection information ip and mdm repository name is true . but I dont see ServerUser Id .
How I see and change this server user ?
Can you help me !
"MDM Adapter listener could not start due to: Can not create repository session '<server=192.168.10.35 serverUser=Admin repository=p0349 user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server '192.168.10.35' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer"

Hi Turgut,
How I see and change this server user ? As scenario is R/3>PI>MDM.
You need to look into your receiver Communication channel in Integration Directory (Integration Builder) where you have settings for defining MDM Server, Repository , Repository User and Password , Port Code of the Outbound MDM port etc.
Please find the below link to check settings for Setting Up Inbound Messaging into MDM.
http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/content.htm
There is no Server User ID but it is Repository User and Password along with other parameters in Communication channel.
Note: Make Sure that your MDM Import Server is also running.
Regards,
Mandeep Saini

Frozen on re-building library, plus connection problems (Zen Mic

Yes, I read the FAQ :smileytongue: I JUST got my new Zen Micro and started putting songs on it. It started giving me trouble with the connection, but was ok for a little bit. After awhile I couldn't get a connection at all. My computer says there's no problem with the USB connection.
Also, it's stuck on the "re-building library" screen. I did the clean-up and reboot, but it still gets stuck there and I left it on for hours. According the the FAQ, it says ["Next you should try [url="http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#23]reloading the firmware/OS[/url], but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded."] But I'm having a connection problem, so I shouldn't do this?
Ahh...someone help! I just got it and I haven't even been able to use it yet! This was after waiting a week for it to be deli'vered.

Connection problems can be caused by numerous factors unfortunately.
The best test if you're able to do it is check on another PC. To see if the problem is with your player/cable or the PC.
There's a lot more advice here in the Zen FAQ at Nomadness.net.

HTTP/1.1 connection problems

Similar Messages

Maybe you are looking for