HTTP 400 after installing Oracle XE

I installed Oracle Express Edition 10G on my windows xp mahcine, and after that i am supposed to open up a database home page,
but the url http://127.0.0.1:8080/apex gives me a http errorcode 400 (bad request).
I would like some advice as to what to do.
I have made sure the port is open in my firewall...
/ David

After running this i get:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-AUG-2009 14:44
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-AUG-2009 10:33:55
Uptime 0 days 4 hr. 10 min. 34 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mymachine.local.net)(PORT=
1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
But unfurtunately i cannot connect to either http://127.0.0.1:8080/apex or http://127.0.0.1:8081/apex.
The error is still the same on 8080 but with 8081 it waits for a long time before timing out.
/ David

Similar Messages

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

No Listener service after installing Oracle 10g 2

Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.

No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ

Oracle 10gr2 locally is not working after installing Oracle 11g

hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime process

Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

Tomcat seems couldn't run after installing Oracle 8.0.6

After installing Oracle 8.0.6, my Tomcat seems couldn't startup. I have set the environment variable for JDBC and Oracle driver like: Classpath = .;c:\orant\jdbc\lib\classes111.zip and path = c:\jdk1.3\bin;c:\orant\jdbc\lib\classes111.zip. However, before installing Oracle, Tomcat was running smoothly. Is installing Oracle make mess between Tomcat and Oracle? Or, is the environment variables are set incorrectly? Please help me to solve the problem. and how to make database connection to Oracle using JSP(Tomcat). Your advice is much appreciated, thanks in advance.

Add a reference to the oracle driver zip file (classes12.zip) to the classpath in the batch file that runs tomcat (i.e. tomcat.bat).
Then, the architectural decision is all yours. You can define a database access layer...
I'd look in to the model 2 architecture if you want to learn how to do this. There are loads of references, none of which I have to hand, but try searching the JDC, there's bound to be plenty.
On the other hand, if you want a quick and dirty solution, then model 1 is the way to go.
Cheers,
KJ

500 internal server error after installing oracle EBS 12.1.1

After installing oracle 12,1.1 using rapidwiz . the login page didn't open because of error 500 internal server,
i run autoconfig for database and i face that error below. how can i unlock that account and how can i connect sqlplus to oracle ebs.
thanks.
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@apps.appsdomain:1521:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked

Please see:
R12: Clone fails with error "ORA-28000 The account is locked" (Doc ID 1114244.1)
APPS User Account Is Locked While Applying a Patch. Patch Fails With "ORA-28000" (Doc ID 420001.1)
Thanks,
Hussein

Using sqlplus command after installing oracle 9i on RHEL 3

Hi experts,
I have installed oracle database on Redhat enterprise linux 3.
Install location is /home/oracle/ora9i.
Version Oracle 9i (9204)
after installation when I typed follwing commands ..it did not work
$ sqlplus /nolog
Please help me with this.
Thanx in advance ...
Deepak

duplicate post of following thread
Using sqlplus command after installing oracle 9i on RHEL 3

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Not able to register with listener after installing oracle grid infrastrtcure in oracle 11gr2 on windows

Hi Guru's.
I am not able to get listener connectivity after installing Oracle 11gr2 Grid infrastructure on windows on vmware workstation. I register with static ip.
Even i recreated the listener and running the listener from Grid home.
The output what i am getting is :--
C:\> lsnrctl status
The listener support no services
Can you please help me out

C:\Users\Administrator>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
C:\Users\Administrator>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 4 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 8 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:13:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+asm" has 1 instance(s).
Instance "+asm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: WIN-0P8BCA3R7V5, pid: 2560>
         (ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=49246))
The command completed successfully

Problem starting ASM instance after installing Oracle Grid standalone

Hi!
After installing Oracle Grid 11gr2 and rebooting my machine:
Linux localhost.localdomain 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
I run asmca command and it failed to startup ASM instance, I tried to paste the log but it's too long!
Could someone help me please! thank you very much!
José
I paste just the last piece:
+[main] [ 2012-03-15 15:01:56.853 CET ] [SQLEngine.initialize:354] m_bReaderStarted: false+
+[main] [ 2012-03-15 15:01:56.857 CET ] [SQLEngine.initialize:358] Starting Reader Thread...+
+[main] [ 2012-03-15 15:01:56.919 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine+
+[main] [ 2012-03-15 15:01:56.919 CET ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null+
+[main] [ 2012-03-15 15:01:56.927 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS+
+[main] [ 2012-03-15 15:01:56.927 CET ] [OracleHome.getVersion:896] Homeinfo /u01/app/grid/product/11.2.0/grid,1+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.loadLibrary:308]+
Inside constructor of OCR
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.isCluster:939] Calling OCRNative for isCluster()+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:943] OCR Result status = true+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:955] Bolean result = false+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.931 CET ] [MessageBundle.getMessageFields:338] MessageBundle.getMessage() failed to load the string PRKC-PRKC-1036 : CRS_HOME name passed to the method was null Exception: java.util.MissingResourceException: Can't find resource for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036 : CRS_HOME name passed to the method was null+
+[main] [ 2012-03-15 15:01:56.931 CET ] [ClusterUtils.getCRSActiveVersion:1797] Error getting CRS active version: PRKC-PRKC-1036 : CRS_HOME name passed to the method was null : <null>+
+[main] [ 2012-03-15 15:01:56.931 CET ] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
+[main] [ 2012-03-15 15:01:57.084 CET ] [UsmcaLogger.logInfo:141] Role SYSASM+
+[main] [ 2012-03-15 15:01:57.085 CET ] [UsmcaLogger.logInfo:141] OS Auth true+
+[main] [ 2012-03-15 15:01:57.182 CET ] [SQLEngine.done:2148] Done called+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available+
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:333)
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logInfo:141] ASM failed to start. Check /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for details.+

Hi,
i've got similar problem but my asm is not just down. After installing grid home with infrastructure I've restarted os and there is no crs services and the only result from this command:
# ps -ef | grep grid
grid      2075     1 0 13:58 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
root      2463 2439 0 14:06 pts/0    00:00:00 grep gridgive me opposite to this one before restart:
$ ps -ef | grep grid
grid      2076     1 0 13:01 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3646     1 0 13:44 ?        00:00:04 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3806     1 0 13:45 ?        00:00:02 /u01/app/grid/product/11.2.0/grid/bin/oraagent.bin
grid      3820     1 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmd.bin
grid      3853 3820 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmlogger.bin -o /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.info -l /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.log
root      3879 2307 0 13:46 pts/0    00:00:00 su - grid
grid      3881 3879 0 13:46 pts/0    00:00:00 -bash
grid      4172     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/cssdagent
grid      4197     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ocssd.bin
grid      4550     1 0 13:49 ?        00:00:00 asm_pmon_+ASM
grid      4552     1 0 13:49 ?        00:00:00 asm_psp0_+ASM
grid      4554     1 0 13:49 ?        00:00:02 asm_vktm_+ASM
grid      4558     1 0 13:49 ?        00:00:00 asm_gen0_+ASM
grid      4560     1 0 13:49 ?        00:00:00 asm_diag_+ASM
grid      4562     1 0 13:49 ?        00:00:00 asm_dia0_+ASM
grid      4564     1 0 13:49 ?        00:00:00 asm_mman_+ASM
grid      4566     1 0 13:49 ?        00:00:00 asm_dbw0_+ASM
grid      4568     1 0 13:49 ?        00:00:00 asm_lgwr_+ASM
grid      4570     1 0 13:49 ?        00:00:00 asm_ckpt_+ASM
grid      4572     1 0 13:49 ?        00:00:00 asm_smon_+ASM
grid      4574     1 0 13:49 ?        00:00:00 asm_rbal_+ASM
grid      4576     1 0 13:49 ?        00:00:00 asm_gmon_+ASM
grid      4578     1 0 13:49 ?        00:00:00 asm_mmon_+ASM
grid      4580     1 0 13:49 ?        00:00:00 asm_mmnl_+ASM
grid      4582     1 0 13:49 ?        00:00:00 oracle+ASM (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid      6128     1 0 13:52 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid      6142 3881 0 13:53 pts/0    00:00:00 ps -ef
grid      6143 3881 0 13:53 pts/0    00:00:00 grep grid
$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): pc
$ srvctl status asm
ASM is running on pcI'm using 2x 1TB hdisk as 2 pv in one vg. I thought that lvolume permissions are incorrect but now I had:
# ls -l /dev | grep dm
crw-rw---- 1 root root      10, 61 May 16 13:57 cpu_dma_latency
brw-rw---- 1 root disk     253,   0 May 16 13:57 dm-0
brw-rw---- 1 root disk     253,   1 May 16 13:57 dm-1
brw-rw---- 1 grid asmadmin 253, 10 May 16 13:57 dm-10
brw-rw---- 1 grid asmadmin 253, 11 May 16 13:57 dm-11
brw-rw---- 1 grid asmadmin 253, 12 May 16 13:57 dm-12
brw-rw---- 1 grid asmadmin 253, 13 May 16 13:57 dm-13
brw-rw---- 1 grid asmadmin 253,   2 May 16 13:57 dm-2
brw-rw---- 1 grid asmadmin 253,   3 May 16 13:57 dm-3
brw-rw---- 1 grid asmadmin 253,   4 May 16 13:57 dm-4
brw-rw---- 1 grid asmadmin 253,   5 May 16 13:57 dm-5
brw-rw---- 1 grid asmadmin 253,   6 May 16 13:57 dm-6
brw-rw---- 1 grid asmadmin 253,   7 May 16 13:57 dm-7
brw-rw---- 1 grid asmadmin 253,   8 May 16 13:57 dm-8
brw-rw---- 1 grid asmadmin 253,   9 May 16 13:57 dm-9and:
# ls -l /dev/vg_main/
total 0
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol1 -> ../dm-2
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol10 -> ../dm-11
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol11 -> ../dm-12
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol12 -> ../dm-13
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol2 -> ../dm-3
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol3 -> ../dm-4
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol4 -> ../dm-5
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol5 -> ../dm-6
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol6 -> ../dm-7
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol7 -> ../dm-8
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol8 -> ../dm-9
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol9 -> ../dm-10
lrwxrwxrwx 1 root root 7 May 16 13:57 lv01_swap -> ../dm-1
lrwxrwxrwx 1 root root 7 May 16 13:57 lv02_root -> ../dm-0I've used search path for ams disks as /dev/dm* and /dev/vg_main/asm* and seen all of them in both configurations.
I've tried to reconfigure HAS through (as root):
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
$GRID_HOME/root.shthis gave me working asm instance but after restart I'm in base position with no crs services.
And... I've tried to startup crs after restart with no luck but before restart I can shutdown everything and startup ASM instance too (so everything is fine till the reboot). I'm on CentOS 6:
$ uname -a
Linux pc 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \mAny hints about how to resolve this problem would be most welcome.
Regards.

IE failed after installing oracle forms

Hello ,
I have installed Oracle Forms10g,& DB then .After connecting to DB when I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the form runtime,rather it shows a blank page with a url: http://<My_PC Namexxx-pc>:8889/forms/frmservlet. I came to know that I need to change formsweb.cfg,default.env and registry.dat,I have installed the my jinitiator also. Please help me out how can i run my form locally. I am giving the codes also of those files,if i need to change anything please let me know
default.env*
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# webutil config file path
WEBUTIL_CONFIG=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_REJECT_GO_DISABLED_ITEM=FALSE
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# E:\ORACLE_INSTALLED\DevSuiteHome_1\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\bin;E:\ORACLE_INSTALLED\DevSuiteHome_1\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\repository.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ldapjclnt10.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\debugger.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ewt3.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\share.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\utj.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\zrclient.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\reports\jlib\rwrun.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\java\frmwebutil.jar
formsweb.cfg_
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the, I have installed the my jinitiator also.Internet explorer (IE 8) doesn't support jinitiator. You have to upgrade JRE.
Check this link. http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
Hope this will help you
If someone's response is helpful or correct, please mark it accordingly.

JSP is not responding after Installing oracle Apps 11i

Hi,
I installed Oracle Applications successfully on my PC with Windows XP OS.
I used expess installation for the VIS database.
After installation all Post Install checks passed except for "JSP is not responding"
checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
JSP is not responding, waiting 15 seconds and retesting.
Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
"Oracle Applications Rapid Install Portal"
Kindly advise how to check what is wrong with JSP and how to fix.
Thanks in advance
AK

Hi,
All services are starting properly with no errors
when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
, i recieve the error :
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to kanaan.mydomain:8003 and look for the information you want.
More information
Apache is running in process manager.
In apache log file the last few lines are :
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
When running the command "ps -ef | grep -i apache":
C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
ernal command,
operable program or batch file.
Also apache is running in the processes.
Kindly advise and thanks for your help

After installing oracle 10gr2 on Leopard, got ORA-12547

Hello everyone,
I've installed 10.2.0.4 on Leopard 10.5.6. Once I created a database, I connected to it and then logged out successfully. But after a reboot, I cannot connect to it anymore.
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Apr 26 22:30:02 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> conn / as sysdba
ERROR:
ORA-12547: TNS:lost contact
Here's lsnrctl output:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for MacOS X Server: Version 10.2.0.4.0 - Production
Start Date 26-APR-2009 16:39:24
Uptime 0 days 6 hr. 6 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /Users/oracle/oracle/product/10.2.0/network/admin/listener.ora
Listener Log File /Users/oracle/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
And tnsping is OK:
bash-3.2$ tnsping macora
TNS Ping Utility for MacOS X Server: Version 10.2.0.4.0 - Production on 26-APR-2009 22:46:41
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/Users/oracle/oracle/product/10.2.0/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = macora)))
OK (0 msec)
Any suggestions? Thank you in advance.

I got an answer from http://blog.rayapps.com/2009/04/12/how-to-install-oracle-database-10g-on-mac-os-x-intel/#comment-472
Run
ulimit -Hn 65536
ulimit -Sn 65536
It works!

Enterprise Manager failes to load after installing Oracle IDM on LINUX86x64

Hi Folks
We are into a serious problem:
We have completed these tasks till now on RHE Linux 86 x 64 bit
Install Oracle Database 11g - working fine and running
Install WebLogic Server Version: 10.3.5.0 - working fine - Console opens fine
Install IDM - Installed successfully with errorr -Only EM console was not configured , rest installed peacefully
Now the problem is, we want to access Oracle EM but it fails to load with this error:
Got TargetException for : target = Farm_base_domain , type = oracle_ias_farm
Collapse Hide Additional Trace Information     Hide Additional Trace Information
oracle.sysman.emSDK.app.exception.EMSystemException at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler._getFarmInstance(EMASConnectionHandler.java:1266) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getFarmID(EMASConnectionHandler.java:288) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getTargetInfo(EMASConnectionHandler.java:450) at oracle.sysman.emSDK.adfext.ctlr.AuthUtil.doTargetAuthProcessing(AuthUtil.java:186) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPostInitContext(EMPagePhaseListener.java:436) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.afterPhase(EMPagePhaseListener.java:234) at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:532) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:203) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$200(ADFPhaseListener.java:23) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:232) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:276) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:77) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:54) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
But when i go to WL Console > Deployments > em - it says active and OK
Can someone please help how to make EM run?
Any idea guys what could be the problem here?
Please help!
Regards
Dev

Ok, I saw that there were two parallel schemas running, now when i deleted one of them, i can see only one soa-infra, but its down :(
How can we make it run?
Here is the error:
Invoking Start Up operation for application soa-infra on target soa_server1.
[Deployer:149193]Operation 'start' on application 'soa-infra' has failed on 'soa_server1'
[Deployer:149034]An exception occurred for task [Deployer:149026]start application soa-infra on soa_server1.: .
Operation Start Up on target soa-infra Failed. Please see error logs for details.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149202     Encountered an exception while attempting to commit the 7 task for the application 'soa-infra'.
Aug 6, 2011 8:38:58 AM BST
     Error     BEA-149265     Failure occurred in the execution of deployment request with ID '1312616332249' for task '6'. Error is: 'weblogic.application.ModuleException: ' weblogic.app
Upon doing a search on this i found that these errors occur only after when we trying to deploy any application, but its a fresh installation and we are not trying to deploy any thing yet and we should not get this error.
Any Help?
Edited by: user12128585 on Aug 6, 2011 12:55 AM

HTTP 400 after installing Oracle XE

Similar Messages

Maybe you are looking for